How to Drill Hole Through an Existing Wall

VideoJoeShows
86 followers
3 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
How to drill a hole through an existing wall is easy...when you know how. VideoJoe needs to drill a hole through an existing wall & he has found a way to do it. Any average Joe should know how to do this so they can finish their electrical project without having to patch any drywall/sheetrock. VideoJoe first used this technique to drill his first hole through an existing wall in order to fish a wire through a wall & he wanted to show you how to do it too. Watch & learn as VideoJoeShows you how to drill a hole through an existing wall so you can fish a wire through the wall. Easy does it.
https://www.youtube.com/user/VideoJoeShows
See we're really doing this man. There's no there's no turning back now. That's where my
box is going to have to go and I hope that stud's there and not way over there and it should be
right there. If I push that in there uh-oh wow that's going to be tight. That's going to be
really tight to get that in there you know because I got the thickness of the sheet rock to deal with
too and I got it man that that's going to be I think I can do it. I think I can do it
because this tip is almost on the back side of this two by four. This is a two by four wall
I think it's three and a half inches thick deep in there a little bit deeper.
No three and a half or so. See there's insulation in there too. I'm gonna have to
kind of mess with that but yeah that the stud is in fact right there and so
I've got to do a little prep work on that. I think if I get ready to drill that hole
what I'm going to do to make this just a little bit easier. See I'm going to cut the back side
of the sheet rock off you know that's not going to hurt anything is it just a just a little bit
just in one spot that way I can get my drill in there just a hair closer to the back side right
and I don't want to go so far that I'm going to bust a hole through here make this so weak that
I'm gonna have a problem later you know but for a little added extra oomph I think that's going
to work now see that oh that helped tremendously that's way better okay right there that's where
I'm going to drill that hole all right here we go I'm going to drill that hole in there
as I go I want to make sure the back side I've got to be careful so this back side doesn't want
to rub the wall you know what I mean so depending how I hit this hole I've got to be careful with
that right well in fact I might have to slide this over just a hair so I can get it at a little bit
more of an angle but enough to where I think everything's going to be fine okay I'm still
going to watch the back side here and be I got to be careful here once this goes through I might
mark that I just got to be careful I'm going to pull this out check that it still feels like it's
tight I gotta find my hole again there it is I think it's about ready to go through because it's
it's grabbing like that usually when it does that that tells you you're almost through
I'm going to try to hang on to this push in and I'm kind of holding it away from the wall
and back too at the same time it's kind of tricky to explain here there it's through
