How to Repair Paint Grade Door Bottom Edge Part...10

VideoJoeShows
86 followers
1 Video View·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 10 is what this howto video is about. VideoJoe is in the process of cleaning up the door bottom edges of the paint grade door & then he will be using a wood rasp to smooth off the door bottom & side edges of the paint grade door at the repair areas. Did the liquid nails hold? Looks like it. Watch & learn as VideoJoeShows you the next step in his paint grade door bottom edge repair to an interior wood door...Part 10
https://www.youtube.com/user/VideoJoeShows
I'm just going to take my thumbnail and try to take off any of the liquid nail that went
behind the masking tape. If I do that I won't have to touch up this door as much. If you try
to flake that off think oh I'll just sand that off with some sandpaper. Now you're sanding off your
paint too. You know I want to get as much of this off as I can first off and then I'll make a
decision what to do. Touch up wise with some caulking or I think I'm going to take a little
wood rasp to this edge here. Now this edge folded down pretty good. Remember this uh the veneer I
was telling you was hardboard. It's about an eighth inch thick. This had grown out to about
three eighths and I've mashed it all back together and uh you know once you get water on there it's
not all going to go back down a hundred percent. This is still protruding out a little bit but at
least it's nice and tight. You know I'd say it's uh maybe a quarter inch at this edge now so this
door is kind of spreading still you know but you can't you're not going to get this perfect.
You can only do the best you can hope that that sticks. That's why we're using the heavy duty
liquid nail so hopefully we're not going to run into a problem later on with this lifting again.
That's why I used the heavy duty because the heavy duty liquid nail is for interior and exterior.
Remember okay so just see what I can do here. All right I guess I'm ready to clean this edge up with
the rasp. See where I had the masking tape it pulled that little piece off and this little edge
is loose a little bit. This here was already missing from before and see how this is lifted
up a little bit. I'm going to have to decide what I want to do with that. Do I want to
do I want to leave that put some caulking right there do because if I sand this or kind of chisel
this down and I'm going to have to put some caulking there and then some touch-up paint.
Now probably I think I might do that I'm not sure if I want to leave that lip lifted up because
remember the veneer goes up this way on the side style of the door. This veneer from here down goes
down this way this goes sideways so that's why there's that's why there's a joint there and that
was lifting up and it was only so tight I could get that. Now it is tight and it's it's like that
because that's that hardboard lifting all out. Remember it expanded right there. Here it expanded
the same you know but this is on an outside edge you're not going to see it as much as right there.
See what happens when you get the hardboard wet. Use my trusty old rasp this thing looks pretty
old but this has really served me well over the years. It's flat and it's got a rough surface here
this side is more smooth then this side is kind of contoured curved see see there that's curved
so this side here kind of rolls over like that rough side and a smooth side as you can see I
you know I've used all the edges on this and this rasp is is pretty old but it's still working.
I mean I've probably had this 15 20 years it's got some some paint and some caulking in here and
probably needs to be cleaned out a little bit still does its job though on wood and metal it
works good on okay so I'm going to take that I'm just going to hit this edge and I'm going to go
down I don't want to go back and if I went back and forth like that that's the worst thing you
could do because you're going to take any edge right there and you're going to try to peel it
back and some of the paint could come off and this could get all messed up we don't want to do that
do we I just want to get that edge down because it's kind of lifting just ever so slightly not
not very much and there's not much I can do you know I can do some as I go that way I can go
longer and just keep it at an angle hey most people know how to rasp and sand but still you
know watch this you might learn you might learn something on the rasp you know short strokes down
or sideways like that not not back and forth there's there's a certain time to do that and
a certain time not to do that you know so I want to blend that
see now right here at the end I could do that flat I'm not at an angle because I've got this is all
glued down but you know if I didn't want to do that I could take the rough side
and just do that a couple times then I don't have to go back and forth you know
now finish it off with the smooth side
kind of blending in that edge see that's hit that edge right there is perfect but not this
right there because that's beyond it now if I if I hit that I don't really want to do that
I don't think I think I'm going to leave that alone for right now see here's here's a little
bit that's loose I couldn't do anything with that you know that's why I got my touch up
paint I want to kind of look at that a little bit there's a little bit more that's loose
I don't do that now it's just gonna peel up later okay now I can look at this edge
this top edge I don't want to go back too far but um there wasn't any paint on that
edge right there anyway so you know I can hit that a little bit there's liquid nail over it
but this rasp is taking some of that off and making that smoother and that's another reason
if you let your liquid nail set on it a little bit longer and cure now you can take the rasp to it
you did this six hours later or the very next day you wouldn't really be able to do that with
the rasp as well you know or sandpaper just trying to trick the eye I put paint over here
you're not even going to really notice as much that there was anything going on
again you always want to work from the outside in I wouldn't want to go on the other side and
go this way because then I could I could peel that off this way you see what I mean
so is there a right and wrong way to rasp
yeah there's pretty much a right and wrong way to do just about anything in construction
