How to Repair Paint Grade Door Bottom Edge...Part 11

VideoJoeShows
86 followers
21 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 11 is what this howto video is about. VideoJoe is still at it wanting to make sure the patch repair comes out looking great so he is taking his time & doing some additional work on the repair area. Watch & learn as VideoJoeShows you what he does next on his door repair project at the bottom edge of his paint grade interior wood door...Part 11
https://www.youtube.com/user/VideoJoeShows
It's looking pretty good. I've got this edge here just a hair, not much,
just a little bit. That's why I'm using the smooth end. It's almost, you can almost get this
smooth enough to paint over if you want. If you've got some sandpaper you can lightly sand that as
well and get done your patch. Okay that side was sticking out a little bit so just cleaning it up.
Same thing with this edge. Now we're trying to do this repair so it looks like
we didn't even make a repair. So that's why you want to blend everything in
to the best of your ability. Hey I don't want you spending the whole day on this.
I want you to spend enough to hopefully do it good enough to your satisfaction.
You get all done. You'll learn from it like, oh next time I should do this, this, and this
and not that, you know. So see that makes that edge nice and rounded off. It's looking good.
Just trying to blend that in to existing conditions. Taking a little bit more off right
there because that's where it was open to the moisture and the hardboard. Doing that a little
bit extra right in there. I got to clean off that edge. I do the paint touch up. I'll just hit it
right in there and that that paint will seal up these edges too and hopefully we're not going to
get this coming back for a while. That's good. Decision time. Remember right here I said we're
going to leave this. I think we're going to put the liquid nail to a test. I'm going to cut that
back. That's kind of bothering me a little bit. You know if we put caulking there I think that's
going to lift some more but I'm going to cut this. I'm going to put liquid nail in there.
Means I'm going to have to let it dry a little bit more. If you've got time to do your patch,
you've got a little extra time and you can do this but if you've got to get this done and finish off
you can put paint touch up on here. Slap the door back up there and call it good. We're going to put
the liquid nail to a test. I'm going to take my knife. I'm just going to cut this. I'm cutting
the top layer of the hardboard. Be careful when you're using a knife. You want to use a sharp one.
I've got to cut it back far enough to get that get those top layers out of there.
You know that have bulged. Not bulged because they've got water in there right.
Yeah that looks better already. Probably should have looked at that. Well I couldn't have done
that before because this wasn't clamped down tight. Remember I'm going to go a little bit further
trying to get this so it's all nice and flat. Use your knife as a little scraping tool.
Scrape that out of there. Okay now we could use some white caulking. We could do that
but I think I'm gonna get this off a little bit further. I'm gonna really put the liquid
nail to a test. I'm kind of kind of wanting to do that anyways and use it like caulking
and we'll have to let it dry. I think I can sand it to a certain extent when it gets hard
and you remember up here this paint's a little loose too so not a whole lot but I'm going to
trim that back just a little bit. You know that I don't know how long that would have lasted
since we're putting it to the test. We can really put it to the test now. I'm gonna put a little
liquid nail there too. My rasp out again. Now see I'm over here so I've got to pull down or
I would push over this way. See if I can do a little better. Just trying to do it and keep out
of your way camera. It looks like this this tip is just a hair loose too still. I'll just use my
knife as a little saw. You know I don't want to go back very far. This this I could if I worked
on I could I could peel this whole thing off. Obviously I don't want to do that. You know once
I get the liquid nail it's only gonna bond on the top surface but I'll get it right on that edge
and that'll keep the that the rest of that top veneer from from lifting any further. Another
reason why I've got to use the heavy duty liquid nail because it's that interior exterior and
this is mimicking exterior conditions right because we're next to that shower.
I'm looking at that that that looks that looks pretty good.
