How to Remove Bathroom Sink Faucet Fail...Part 1

VideoJoeShows
86 followers
21 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to remove a bathroom sink faucet...Part 1 is what this howto video is about. VideoJoe is just now ready to start working on installing a new bathroom faucet in an existing bathroom but he first has to remove the old bathroom faucet. Watch & learn as VideoJoeShows what he has gotten himself into this time!...Part 1 Hey just remember that if an average Joe can remove & replace a bathroom faucet then so can you.
https://www.youtube.com/user/VideoJoeShows
Our project today is we're going to remove this bathroom faucet and we're going to move
remove the pop-up valve assembly. Have you ever removed one of those or thought of removing one
and you were having questions you weren't quite sure how to do all that? Well you gotta watch this
then. It's not that hard. Am I a licensed certified professional plumber contractor
that has replaced these for the last 20 years? No I'm not. How many of these have I replaced
in my entire life? Oh maybe 10. I've installed maybe four or five brand new ones from scratch
but I'm not a plumber. That's why I want to show you how to do this and that you can do it yourself.
If an average Joe like me can do it then you can do it. Now I'm going to be here for a while
and there's not much room underneath this sink you know and you notice you can't see any hinges.
These are concealed hinges. I'm going to be careful with these doors. I don't want to keep
the doors propped up and think oh I'll be careful I won't hit that. You hit that one time and crack
these hinges are going to break right out of the particle board. So I got to get these off.
I've never touched this before but on concealed hinges usually there's a there's a button on the
back of it or a little flip and I can feel there's something there. I'm just going to pull on that
and that snaps right off. Look at that. It's so easy to take these off you know. Now I can keep
those out of the way. Have you ever come across concealed hinges? There's always a way to take
it off somehow like that. I mean there's so many screws on here. Look at this. There's screws on
here. There's screws on this. You don't want to you don't want to take all that stuff off
because if you do now you're now you're in for it you know.
All right take your doors off just like that. Look at all this extra room we got.
I got all kinds of room now and those doors are gonzo. First thing, is there a first thing to do?
You know you don't have to do this in the exact same steps as I'm going to do
but uh gotta get this trap out of here. So this one's got little ears on it and it's plastic. I
should be able to unscrew it by hand and I can. Lefty loosey, righty tighty. Okay and when you
take this off, see I got a little plastic container under here. This is full of water
wherever this pipe is. This height. All this is filled up with water up to here. Same height as
or down to the bottom. Okay right there. This is full of water. That keeps your smell from your
sewer line coming back up from the sink. If you ever wondered what why is there a trap like this
because this is always full of water. Okay that keeps the the smells out and I know it's it's as
high as this because it's this is the bottom of the drain outlet going out so anywhere from there
down this obviously this water can't go anywhere right. Okay so I unscrew this
and I didn't have a bigger bucket but you know just do the best you can.
Now remember what you're doing as you're taking this apart because we got to put this all back
together right. Now we're only worrying about the sink so this I don't have to do anything from here
that way do I? I've got to take this nut off so I'm going to have to kind of this is all slimy.
I'm going to have to kind of clean that off and scrape that off because I've got this washer
sleeve that I have to slide down and I have to pull this off too because I'm going to reuse that
on the sink. I should have an extension piece like this. Hopefully I got one this long you know in
there and then I can reattach it like this. Okay so that's going to be my next step to slide this off.
Yucky poo poo. This is all all kind of slimy.
I need to save that piece because it's got threads up above it. If I have to worst case
scenario I might have to reuse this piece. Just hold your breath as you're doing it.
Swallow a few times. I've still got my little bucket underneath here.
Clean this off all the way then we can slide that sleeve off of there.
See that washer? This washer I got to come down. That keeps got to have that on.
You can't just take that off and leave it off because that helps this trap not leak once we put
it back together. Wow that is not good at all. I'm gonna have to replace this water valve here
and this this is the hot water valve and the other one to the right is the cold water valve and
that's dripping plastic parts. It's all rusty around it. Tells me these valves have been in
there for a long time. This is what happens sometimes. You start working on things that are
kind of old you know you go to you go to try to fix one thing and you get into a problem where
you got to fix something else but you know either way had you called a professional plumber out
this same thing could happen to him too. Okay so what I'm what I'm going to decide to do now I
I could find the main water line to the house and I'm gonna I'm gonna look for that
and I could maybe turn it off and then I could replace this the faucet couldn't I?
I turned that water off then turned it back on later but you know that's kind of dicey too
because then you get you get particles inside your lines but either way I'm gonna have to
go to the store and pick up some parts and this this pipe I need to measure it because
it's compression fitting and it looks not sure what size pipe that is usually it's either half
inch a half inch copper pipe coming out of the wall or three quarters I know it's not three
quarters and that that looks pretty small just barely over half inch so I don't even know that
could be three eighths but I'm measuring it and you know it's a long half and that could be half
inch. I'm gonna have to make a material list and get some compression valves and I may even get new
lines here too I might have to redo everything up there pondering here what to do
