My dishwasher is leaking: what do I do now??

VideoJoeKnows
63 followers
2 Video Views·May 17, 2026
http://www.VideoJoeKnows.com My dishwasher is leaking: what do I do now?....have you ever said this? Do you know what to do, in order to find the leak in a dishwasher? You don't have to be a plumber, to check for a leak in a dishwasher, either. It's a good idea to attempt to locate the leak to the dishwasher, on your own, in case it's something you can fix yourself, so you can save money. Stop throwing money away & get in the habit of checking out things first, before calling an appliance service tech, to fix your leaking dishwasher. Checking for water leaks in a dishwasher, may be easier than you think. Just watch "joe" to find out.
http://www.VideoJoeKnows.com
On most cases, however, you're going to need to take this bottom panel off and run this
dishwasher through a cycle and look under there with a flashlight and see if you see
any dripping water anywhere.
Now, how do you take this off?
There's some screws down here generally.
You undo those and then this is going to kind of swivel up, but there's another screw up
in here and there's one over here.
So in order to get those, you've got to open the door.
You've got to look down there and find out exactly where the screw is.
You've got to undo the screw there, undo the screw here.
It's kind of tricky to get your fingers down there and get that.
But once you get those screws out and fished out, then you can pull this bottom panel off.
Now, I've already taken these two screws off and the bottom ones, okay?
So now you can slide that out like that, okay?
And then this bottom piece, you need to make sure you look at that and see how that goes
because this bottom piece kind of slides up and down.
You might want to remember that as you're pulling it apart so that you remember how
it goes back together because you don't want to do it the wrong way, okay?
All right, so make sure you keep all those screws in one place, all right?
And then we'll look down underneath here.
Now when you're checking for leaks, you've got to run this through an entire cycle.
Don't just run it on normal wash or rinse and hold or something like that because wherever
your leak was, it could be activated anywhere along this cycle and I never know whether
or not it's going to start dripping.
So that's why I like to run it through an entire cycle.
Now, you know, obviously it takes a while to do that, but I'm willing to do that before
I call it good.
Now you see this connection right there?
That's your main water connection and sometimes it drips from there, but I can tell it's not
coming from there.
You can always check that, turn the, if you can't find a drip, you may not find a drip
unless you turn the dishwasher on and run it through a cycle.
As right now, I'm not running it through a cycle because I can see that it's dripping
right there.
Now I can run it through a cycle and see if it drips anywhere else, but chances are it's
just going to drip there a little bit faster, you know?
These are the types of steps you're going to have to go through.
I've got everything wiped up and I can see right now that it's still dripping right there.
Do you see that?
What are we going through all this effort?
Why wouldn't we just call an appliance company because we're being little investigators to
see if we can't fix it ourselves and save some money.
That's what my channel is about.
Haven't you figured that out by now?
If I can save some money and do it myself, I'm going to do that every time.
I want you to see the type of stuff that I go through to see if I can figure it out.
I bet something, some motor or something like that, obviously I am not an appliance repair
person.
I'm not going to start pulling this whole thing apart.
Most of the things underneath here, I don't even know how they work, how they're connected
or anything like that.
If it's one or two different things that I've done before or that I feel comfortable fixing,
I'm going to try it.
You need to get in that habit too.
