How to Remove Bathroom Sink Faucet Fail...Part 2

VideoJoeShows
86 followers
7 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to remove a bathroom sink faucet (fail)...Part 2 is what this howto video is about. VideoJoe is ready to remove this sink faucet but something happened under the sink to prevent him from removing the faucet. What could have possibly happened to where he can't remove the faucet? Let me just say he is not happy & now has to run back to the store to pick up some more parts. Things happen when you get ready to remove a bathroom sink faucet in an older home or condo. Like what? Just watch & learn as VideoJoeShows you what is happening to where he cannot remove the bathroom sink faucet just yet...Part 2
https://www.youtube.com/user/VideoJoeShows
I guess I'm going to go outside try to find the water the main water to the whole entire house.
If I can turn that off then I can still replace what I came here to replace the faucet and then
later on down the road I can you know go to the store get the parts come back and do this
and still get my job done you know what I mean. I'm going to try that first.
Well we have a corporate decision. What I'm going to end up doing is I'm going to replace
this valve here this gate valve on the hot water line also the cold water line. These have been
on here for quite some time. They're rusty and this almost it was plastic and it had some residue
deposits of water on there and it just basically bonded this right on there so when I tried to
turn it off I don't know if you saw but I hardly turned it tried to turn it off snapped right off
sometimes sometimes these goodies are metal back in here but this one happens to be plastic
and the scutch and trim ring back here is all rusty so is this one over here at the cold water
line I'm going to replace all that and these are copper pipes coming out of the wall so I know I
need to get a compression fitting type valve got any questions look at your existing stuff and
you're going to have to do some measuring with your tape measure and stuff you might even want
to take some pictures on your tele on your uh you know your camera or something so when you go to
the hardware store you can show somebody and even these water lines I don't know how how old they
are but I'm going to go ahead and measure those I'm going to get some new ones of those too so
when I come back I'll have to change all this so you know the project just got a little bit
better for you you're going to learn a lot on this one I've got to make a material list so
until I come back I'm going to go ahead and put this all back together
in case you still want to use your sink you still can
you know this this here you just tighten up as tight as you can with your hand that's what these
little thumb turns are for that's kind of a good thing if you don't have that if you've got a
different type of nut you can use something like this these are channel locks and you can adjust
this you know if you've got a metal ring here if your trap is metal you know a steel trap
your nuts may be really super hard to get back on there then you're going to have to use some
channel locks make sure when you tighten it down you don't go too tight last thing you want to do
is tighten these down too much you could crack these once they crack you're going to get a leak
all right okay I guess I better make up that material list and go to the store
