We've had a stretch of great weather, so we're taking advantage of it. Continuing on with Mr. Tony's order, I milled a red oak log into random-width 4/4 boards. Jamie started the day tidying up her raised log bed and then brushed and stacked lumber. After that, I took down five pines for an upcoming 1000 board foot order. Busy day!
PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com
Okay, golly grace, stop that. That's it for this blade. Look at the reflection there. Look at that.
This is the first blade with the wiper system. And oh my goodness, that should have been done
on day one. So before putting this wiper... Look how clean that is. Before putting the
wiper system on there, I would get six to seven, eight foot pine logs, just average size, nothing
monster, right? Out of one blade, six to seven logs. Well, on this blade, that's eight foot.
This blade, I did six 10 foot pine logs, one eight foot 20 inch diameter cypress. And I got that far
on this red oak before. I really felt like I was pushing it. No pun intended.
But this red oak is beautiful. So I've already made one, two, three, four,
five, six, seven, eight boards out of this red oak. And of course, all the slab cuts as well. So
quite a few cuts with this one blade. Much more than before the wiper system. So
I haven't done the math, but for sure, this is more than going to pay for itself. Probably this
summer. Was the camera recording it? No. Does it count? I was giving you a hard time. Love you.
Fold it. Every time dad gets done with the blade, he folds it up so that he can move it
later and put out of the way. And he was struggling holding those things the other day.
It's like he couldn't wrap his mind around how to do it. Like he could do it, but he could never do
it on the first try. And so he just said he folded that blade up on the first try. And that's why I
gave him the hard time and said, did the camera get it? And he's like, no. And I'm like, well,
does it count? I'm giving him a hard time. What a difference a fresh blade makes. I put a seven
degree blade on there instead of a 10. And also it's sharp. This is four and five sixteenths by
six and a half by a hundred inches long. And I put it on Facebook marketplace already as a mantle,
a red Oak mantle beam. And the, uh, the, both ends are sealed with anchor seal,
but look how tight those growth rings are nice and tight. This was a pretty nice log. Uh,
it made me realize what the next sawmill upgrade will be. And that is stainless steel bunk covers
because I'm starting to get some, uh, residue on the boards. I'm not mistaken. This is just
the paint scraping off, but, uh, paint scraping off leads to metal being exposed and the metal
will interact with, I'm probably wrong on this, but I think I read that it'll, it'll interact
with the tannins and Oak and some other woods and cause a chemical reaction. This is just paint,
but a chemical reaction, uh, in the wood that is harder to get out. Very similar to if you put a
nail in a tree and then you cut that up into say firewood or whatever, 10 inches down, up or down
from that nail, you're going to see black in the end grain. And that's the reaction from that piece
of metal. Well, I don't want the, uh, the, the bunks of the sawmill to react and cause a bunch
of standing. So that's probably the next upgrade on the sawmill, but stainless steel, it's not cheap.
It's not cheap at all. I still have to cut a one, two, three, four, four boards. I still have to
edge. So I'm about to do that before I release the pressure on the bandsaw, but it's pretty
beautiful stuff. If you're a fan of red Oak, this is beautiful. If you're not a fan of red Oak, well,
no one's perfect. It's got a color that you either love it or hate it. And a lot of people where I
live, hate it. Don't really like it at all. And because all of these slab offcuts are red Oak,
these offcuts don't go in the typical pine offcut slab area. These I'm just going to take right over
to the firewood pile because red Oak, why not? Okay. So I'll show you some of the end results
of my labors today. We took some of those, or I did, I took some of those wood chips that were
delivered a couple of days ago and I filled in this raised log bed. And I think it did a wonderful
job of just making it look more complete and filled in. It's still not completely level and
I'm okay with that. I don't think it has to be. It's not supposed to be one of those like
picture perfect beds. I have some plants here that we showed you already and stuff that we
transplanted from the first garden I had. And I plan to fill this in a little bit more as the
year continues. But I think that again, this just did a lot and then I was able to weed a little bit
while doing this. And so I'm hoping that these wood chips not only deteriorate, make the soil
better and help retain water, especially during the hot summer months. Because I may not be able
to water this too frequently, but I'm hoping that when I do water it, the wood chips will help
retain some of that moisture so it won't have to be done like as frequently. But we'll just have to
just see what the year brings and how this works. We've been talking about making another
slight horseshoe around this way and kind of enclosing this in and putting a fire pit in the
middle. One of our major concerns with that is, or was, how we're going to fill it. This was a lot
of dirt to fill this one. Luckily we had a bunch of burnt material and dirt that was pushed around
from the clearing and we were able to pretty much fill this one. But we don't have that resource
that's, we don't have an unlimited resource of that kind of stuff. So we weren't sure what we're
going to do. But then, I don't know if you can see it over there, but all those wood chips,
it's not going to be a problem anymore. So we're going to do this hopefully in the next coming
weeks when we get a chance and get that filled up. And then it'd be great if I had two flower
beds around here just as something for us to come sit around and just enjoy while we're outside.
Can we just get a round of applause for Jamie brushing all these boards off for me? I don't
ask her to do this. She just says, I'll do this when you run the sawmill. And it is so much
appreciated. Very much appreciated. We got all the red oak cut like normal. This bunk is going to go
bye-bye in just a few days. But the rest of the day I need to be taking down trees. And this is my
favorite saw to do it with. I've had this saw for a year now, just about. I forget the exact
time that I got it, but I'll put it on the screen. And I mean, this thing is a really,
really nice saw. It really is. It's just the Chinese clone saw. But the exhaust just rips.
This thing, it's torquey. For a take it out of the box and use it saw, I mean, I'm super
impressed. I really am. Comes with a 24 inch bar and a 20 inch bar. And if I'm not mistaken,
it was two chains for the 20 inch and then one chain for the 24. I think that's what it is. I
don't recall. But I have used the 20 inch bar considerably and both chains and ended up having
to file down the bar on the 20 inch bar. As far as getting this edge nice and perpendicular to
right here, because if your saw starts to wander in one direction as you're making a cut, you're
not going straight. You're just going on an angle like that. Eventually you'll bind up. But that
means your groove in here on the top of the bar is not flat, right? One side is wore out more than
the other, causing the chain to rock around. Anyway, I had to work on 20 inch bar a little
bit with my sander. I've got a horizontal belt sander and just get it all nice and perpendicular.
And I haven't had to do it to the 24 inch yet. I don't think I have. But regardless,
that's all I've had to do to this thing. And then sharpen the chains. I hand sharpened with
a 7 16th file, thanks to some awesome videos by ******* Billy Ray Smith on YouTube. Chainsaw
filing is pretty darn easy once you get the hang of it. And it just it makes a world of difference.
A nice sharp chain versus one that's dull. So I'm going to sharpen this real quick and then we got
to take some trees down. Time to take down some trees and five of them. I need a thousand board
feet for a job. And if I'm not mistaken, these five trees, one, two, three, four, five, that is
1500 board feet. Approximately I measured their circumference on all these. I'm trying to work
on a spreadsheet to where I can more easily estimate board foot out of a standing tree
on average. Obviously, there's a lot of a lot of variables, but on average for these pines,
because we've got like 30 acres of these pines and I'm slowly going through them.
So if I could just plug in some circumference measurements and get a ballpark figure, that'll
help me out a lot. But all five of these are coming down and I'm losing daylight. So just
want to get them down and that's it. Well, it feels good to get all five of those down. I really only
need four, but I'm running out of clean pine logs for the sawmill, which is a wonderful thing.
That means I'm actually going through them and selling them. All these are not beetle damaged.
None of these are beetle damaged. So the pine should be magnificent. This helmet, by the way,
this is, I bought this helmet because I messed up the white one. You know, the white one I had
forever. It's a no cry brand, no affiliation with them whatsoever, by the way. But I bought
the white one, which is their basic model, whatever that means. And it's a pretty good helmet.
But the earmuffs, you see how they rotate to the back? One day I thought that they clipped out.
I had no, just a brain fart, right? Wore it for months. And then one day I go to pull the earmuffs
off and I did it on both sides at the same time. And I was thinking in my head that they'd just
click out. They don't, they rotate back. And I busted one of the earmuffs off and I'm like, oh
crap, they're kind of pinched down to hold on your head. So you can't use the other side because
it's just flopping. And I couldn't attach the first one. So dang it, I got to buy another one.
Well, I kicked that can down the road for quite a while and was just using in the ear hearing
protection. But I really like when I'm doing chainsaw work, I really like this whole helmet
system. You know what I'm saying? The flip down little visor thingy and the earmuffs, I like it
all being together. Well anyway, long story short, I was like, I'll just buy another one. Just buy
another one. Okay, well I might as well buy the nicer version, right? This is the nicer version.
It sits a little bit lower on the front, which I like. And it seals off on the top of the visor.
See that right there? Seals off. So anyway, I think it's an improvement. I recommend it. Thumbs
up if you guys want to check one of those out. No affiliation with the company, but it's worth my
money. That's for sure. Tree number one, I mistakenly left too much hinge wood on the operator
side of the chainsaw. I mean, that's the easy side. I can see it, but I left too much hinge
wood right there and had to pound that one over. Eh, not the end of the world. The second one,
which was this one right here, I didn't cut in far enough with the wedge. My wedge isn't,
I don't think it's far enough. It should have gone a little bit further in. So the hinge wood
is kind of sort of towards the middle. Excuse me. I had way too much material on the left side of
the pith and had to wedge this one over. Okay. Okay. Things should get better on the third one,
right? No. Oh my goodness. I made an error in judgment a few times. I wouldn't call these
mistakes. I'd call them an error in judgment. This one, once again, the wedge isn't that big.
It needs to be bigger than that. And I left way too much hinge wood right here.
Error in judgment. So I had four of my big wedges right here buried and it still wasn't going
anywhere. So I saw this trick on another YouTube channel where you plunge in just a little bit,
right below your wedges. If you have some supporting wedges on either side, but
plunge in just a little bit so you can get another wedge right there. And that wedge will lift this
wedge, which is already buried. And yeah, it worked. But this one was just a cheapo wedge
tri-link. This might've been a Walmart wedge. The other four that I have are Husqvarna and steel,
but I got to get some more because apparently I'm such a rookie that five wedges is what it took to
get this one down. Just again, an error in judgment right there. And I'm fighting what
the chainsaw should have taken care of. That's way too much hinge material. Okay. Okay. Okay.
So that's number three. Number four should be easy, right? It's over here. Number four.
I think number four was easy, actually. This one had a little bit of a lean. So,
did I use wedges? I don't remember, but this one was pretty easy. And then I wanted to put them all
into the clearing, but this one had a definite lean into what is essentially an open cavity into
the woods. So I said, okay, well, we'll check that box. And, uh, this one I knew was not going
to require a wedge at all to knock it over. And there you go. Previously, I measured a handful
of these trees after I took them down and we're, we're like 120, 130 feet up in the air. That's how
tall these trees are. And they're, they're pretty much all the same height. Commercially planted
loblolly pines. I mean, you can look at the tree line behind me. They're pretty much all the same
height. Well, uh, I started a calculator on Google sheets to help me kind of get a ballpark idea
of board feet on each one of these trees. And I'm taking into consideration five, eight foot logs
from the base of the tree, man, my hand is shaky, shaky, uh, five, eight foot logs,
which puts us now, if we do eight foot, six inches, that's another two and a half feet. So
42 and a half feet up the tree, plus the stump, which is about two feet, we'll say two and a half.
So 45 feet up on this 130 foot tree. That's all I'm taking into consideration for board feet
calculating. Obviously the further up we go, we still have plenty of good material,
but I'm not really calculating that for lumber to sell because that type of lumber is going to be
just absolutely full of knots and defects and whatnot. So what I have been doing with those
is trying to just get the biggest beam I can out of them until it gets down to a point where it's
like, nah, I'm just going to be fighting branches and not even worry about it. I really like coming
to this side of the clearing and looking that way because one day our house is going to be
somewhere over here and the sun rises over there. So I'm hoping to, we haven't settled on a floor
plan just yet, but I'm hoping to have some type of east facing living room and porch. I want a
wake up, go out on the porch with some coffee and watch the sunrise over the shop and all over all
of this. Man, that's just going to be so exciting. That's going to be exciting. Also, if we have
friends and family over to entertain or whatever in the evening hours, at that point, the sun will
be behind us and it'll be shooting over the house. That way the east facing living room and front
porch should be shaded quite a bit. And that'll help with heat, especially in the summertime
and whatnot. Oh, I don't know if you saw the pollen, especially with this tree. When the
tree came down, this big cloud of pollen, I think it's catching up with me now. My sinuses are
trashed. But the girls already left to go to Kung Fu, left me behind because I had to get this done.
This was my only window of opportunity to get these trees down in the 10 day, in the 10 day
forecast. The rest of the 10 day looks beautiful, beautiful weather, 70s and 80s temperature and
no rain in a 10 day. You know, it's a little asterisk there. It's Mississippi. It's going to
sprinkle one of these days, just enough to make you frizzy. You know what I'm saying?
But this is my only window of opportunity to get them down because of the wind. It's supposed to
get pretty windy the next few days, which when the sun starts to come out, we're not really used
to summertime. You know, 80s feel like, feel like, oh my gosh, it's 80 degree weather, which is nothing
in the dead of the summer. But that wind is going to feel good to kind of ease us into these warmer
temperatures. I'm really, really enjoying it. That's all that I've got. I've got to clean up
and go get to get a shower, get some of this poison ivy dust off me.
Productive day though. Red oak log, five pine trees taken down and I'm exhausted.
That's how you know it's a good day. When you go to bed exhausted, you know it's a good day.