Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool arcade game repair
video for you today. Look at the back of our shop. It's a big mess. We're going to work on a monitor
in one of these cruising games. I gotta tell you what happened. Joey has been a part swapper.
That's like the worst thing you can call somebody in the arcade game repair business.
Instead of fixing something, he just swapped the part. Can you believe that?
So we had a customer call us that was having a problem with a monitor in one of their driving
machines. We knew we had the exact same monitor here in this cruising world here in the middle,
and so he pulled the chassis out, took it out to them, and swapped it into their machine.
Took the broken chassis back here to the shop, and now we have to fix it to get it back in our
cruising world so that it can be up and running. That's not the best way to do things, but in this
particular instance, we wanted to make sure that the customer got fixed up, and we wanted to make
sure that we could do it out on location, so we just took the monitor with us. So the tube is
actually still in the cabinet, but we've got the board. So we're going to take a look at the chassis,
see if we can figure it out. It's got an actual very simple fault to it that you usually don't
see. We'll talk a little bit about that. It's lost horizontal deflection. You usually don't see that,
but it's still got vertical deflection, and it's still got high voltage.
So we'll see what we can do about that, but we had this gentleman that we used to know
back in the day that was an arcade game repair guy, and the first time we heard that phrase was
he was talking trash about another arcade game repair guy, and he was like, ah, he doesn't know
what he's doing. He's just a part swapper, and we're like, what in the world? And he's like,
yeah, I mean, he gets like two of the same game, and then he'll just, he'll just, he'll take the
part out of this one and put it in that one, and then he'll just make one good one out of two.
Won't fix nothing, and then he makes one with all the bad parts in it and throws it away or sells
it. And so to him, calling a repair guy a part swapper was like this great, this great insult.
So we don't want to be a part swapper. We want to fix it, but in this instance, we had to,
we had to do that to make sure that we got the customer happy. So let's check out the chassis,
and then I'll tell you what it's doing, and we'll see if we can figure out how to fix it.
It ought to be something easy. It ought to be a very obvious problem. We'll see.
So here is our chassis that we have part swapped. And kind of the key to repairing one of these is
to figure out, whenever you've got a single issue like this, is to figure out what part of the
monitor you're looking at. So you kind of have to understand how they work just a little bit
to figure that out. We've fixed a ton of them over the years, but I still wouldn't consider
myself an expert or anything, obviously. And in the arcade games, you've got the same monitors
pop up over and over and over again. That's how we were able to just swap the chassis,
because the guy had the exact same monitor that we have here at our shop. So on this particular one,
it is a Wells Garner 7500. That's what the 75 stands for, 7500 series. And the 25 is,
it's a 25 inch Wells Garner 7500. You can kind of just tell at a glance by looking at that, but
if that said 2574, it would be the 7400 series. And then sometimes they say U2000, U5000,
and there's just a bunch of different ones. So the difference between the 7500 and the 7400,
which is almost identical, is the 7500 is a medium resolution chassis, which is EGA,
and the 7400 is a low resolution chassis, which is CGA. So something like Mortal Kombat 2 might
have had a 7400 in it, Wells Garner 7400, because it was a low resolution game, 15 kilohertz signal.
And then the EGA games were 25 kilohertz, I think, something like that. Anyway, it's just,
it has to do with the resolution of the signal. You don't really even need to know that. All you
really need to know is that there's low resolution games, medium resolution games, and then high
resolution games. So the high resolution games are VGA, commonly called VGA games.
So this is a medium resolution Wells Garner 7500. Very similar to the Wells Garner 7400,
the U2000, and the U5000. At a glance, they all look the same. They've got the same size board.
They'll have the same heat sink. Flyback's in the same place. The power supply is in the same place.
They hook up in the same place. Just at a glance, you can't really tell which one's which. If you
start paying closer attention, you can pick out which one's which. So with that said, you kind
of need to understand the different functions of the monitor that make it work, and I'll explain
at least some of those. I don't know if I'll remember all of them, but I'll explain at least
some of them, and I'll show you how that can help you repair the thing, okay? So first of all,
you have your power going in. So the power connects here, and on this particular monitor,
they've done a really good job of just putting the power supply kind of right here. So this is the AC
area of the power supply, where the 120 comes in. So if your monitor just isn't doing anything,
completely dead, you might have a problem over here, but that's rare. You don't usually have
that unless the fuse is blown or something catastrophic has happened, because it's
literally just 120 volts coming in and doing its thing, okay? And then it gets up to here,
and it goes through these diodes. Well, when it does that, it turns into DC voltage.
So on this particular monitor, this area is kind of like the next part of the power supply.
So you've got the AC part and the DC part, and this is all a switch mode power supply,
a switching power supply. So because of that, you don't need an isolation transformer. Some of the
earlier monitors, the chassis was connected, was hot or whatever, and because of that,
you needed to use an isolation transformer to disconnect it from the AC loop being used to
power the cabinet. The way you can kind of quickly tell that usually is if there's a
big transformer on the board, you don't need the separate isolation transformer off the board.
Might be a couple exceptions, but pretty much the reason that's there is it's kind of doing,
it's not an isolation transformer, but pretty much that's how you can tell. It's a quick and
dirty way to tell. So with that said, there will be a smaller transformer on some of the ones that
need, I don't have one laying around here, I'll show you a different type. But anyway, if it's
got a big honking transformer, you probably don't need an isolation transformer. That's one too.
Okay, so that's that. Then this section makes the B plus voltage, which is the voltage that
the whole monitor runs off of. It'll make a couple other voltages that it needs as well.
B plus is an old phrase or an old term that comes from the old radios. If you've seen
our amateur repair time channel, sometimes I work on old tube radios. And back in the day,
they had different voltages. And one of the voltages that the radio used was called the B
positive voltage, B plus voltage. And sometimes they used batteries and there was different
voltages on the batteries. Well, the radios came around before TVs ever came around.
And so the B plus voltage is just a holdover from the radio days. It's just that the people
that understood how to work on the radios were familiar with that term. And they used it when
they made the television sets. This is essentially a television set. So AC power and then DC power.
So this is going to create our B plus voltage. And sometimes it'll even be, you'll see some
stuff labeled that. Yeah, look at that. B plus adjustment. So it's telling you that this knob,
if you turn it, can turn up or turn down the B plus. Now you'll notice there's a bunch of glue
on it. It's because at the factory, they would glue that adjusted and that's how they would leave
it. Okay, so you have that. And that's going to create, this is the power supply and it's
going to create the voltages to run everything. I'll point out another interesting little area
over here, if I can find it. This one. See how this says shut down. So these have a circuit
built into them called an x-ray protection circuit. Basically, if the voltage gets too high,
it starts producing essentially x-rays that are dangerous to you. If you've ever actually had a
medical x-ray, you'll notice the person giving it to you stands behind like a vest of lead or
whatever in a different room or something to protect themselves from the x-ray. They let you
get zapped with it though. But they don't want to get zapped every day over and over and over
again. So they wear protective gear because x-rays are actually dangerous. So if this B plus
goes too high, let's say this one's supposed to run at 130 or whatever it is. If it raises up and
it's running at 250, that might not be good for your health, right? So this shutdown system will
actually turn off the high voltage on the flyback and most of the monitor to protect you from that,
right? And so that's kind of involved. So sometimes you've got a situation where
you're getting voltages on the monitor but nothing's working. It may be because it's in
what they call high voltage shutdown. So like if you check that B plus and it's really high,
250 volts or something like that, it's probably in high voltage shutdown and that
circuit has turned off the flyback and some of the other things for your safety and protection,
right? And there are little test points around the chassis. There's the video B plus test point
and stuff like that. And whenever you read the manual and the schematics, sometimes they help
you understand what those are supposed to be doing. OK, so think about the problem that we've
got on this monitor. I mentioned that it's got horizontal collapse. It doesn't have horizontal
deflection. So what that means is when you look at the image on the screen and horizontal is going
to be the direction that's longest. So like on an arcade monitor at least, it's set up like a
television screen where the left to right is longer. That's the horizontal direction. Now in
some games, it's turned up. Like if you think about Pac-Man, it's turned so that the long
direction is actually up and down. That's still horizontal deflection even though it's turned
sideways. And also a game like Space Invaders was like that. A game like Donkey Kong was like that.
A lot of the early classics, they turned the monitor sideways. Looked really cool actually.
They don't do it as much anymore. But it's still horizontal even though it's arranged vertically.
So you kind of have to, it gets a little weird. But if you're talking about the chassis itself,
the horizontal part of the chassis is up and down if the monitor is turned sideways. It's whatever
the longest axis is, right? So on ours, it's in Cruisin' USA, Cruisin' World. And so it's
mounted just like a TV where it's wider left to right. So it's mounted kind of the correct way
and horizontal is left and right. So what's going on with ours is there is a flat line right down
the middle of the screen. So this is actually very simple but it seems confusing. Since that line is
flat going up and down, what that means is it can't go horizontally. There's nothing horizontal.
You're not moving to the left. You're not moving to the right. The image should be stretched out
to the left and stretched out to the right so you can see the whole thing. So it has lost its
horizontal deflection. It's having trouble creating the horizontal deflection, the horizontal beam.
Now the vertical beam, which is the shorter axis of the monitor, is actually working correctly
even though it's just in one line but it is reaching the top and reaching the bottom. So the
vertical is working just fine or the best we can tell because all we can see is that one beam.
So we've got a problem with the horizontal deflection. Well that's kind of the weirdest
problem to have on a monitor. You don't see that too often. Usually the problem is in one of
the other areas because it's such a simple circuit and it's also tied in with the
the B plus and the high voltage being created because it deals with the flyback. So usually
if you have high voltage where you can actually see an image on the screen, usually you have
horizontal deflection because they both kind of happen at the same time. But that very first
or one of those very first parts of the sequence of things that the monitor does, we don't have
and then the rest of the monitor appears to be working correctly. So it's very weird. Usually
it's caused by a broken connection somewhere. So it could be that the yoke's messed up. It could
be that there's a broken trace on the board. It could be there's a cracked component on the board
or something. So that's what we're going to be looking for. So we got the power supply, the B
plus part, the shutdown, and then the horizontal deflection. Ours is screwed up. It's not working
right. At the same time, there is the horizontal oscillator, which is what I would call it, which
is basically creating the high voltage to make everything work. So the high voltage is what
runs through here, runs up to the anode on the tube, and it creates the static sound that you
hear whenever the monitor comes on. This is like 10,000, 15,000, 20,000 volts, whatever it is. I
never really measured it. It just happens or it doesn't happen in general and you can't really
adjust it too well. The B plus though changes the level of that, which is why if your B plus is
really high, that x-ray protection thing pops in because they don't want this high voltage going
really high. So the high voltage is working because we can see the image on the screen.
It's just the wrong image. It's just a line. So the next thing that it does is it does
vertical deflection. Well, we've got vertical deflection, so it's doing that. All of that is
over here. This is the vertical deflection circuit. Vertical deflection IC. And so all of that is
working well and it actually may say that's horizontal sync somewhere there. I think there's a
vertical deflection measurement. Maybe or maybe not. So no vertical. I mean the
vertical deflection is working fine. So once you have a raster on the screen, as it's called,
basically it's creating the sweep of the whole screen. Once you've got all of that,
now you have to worry about putting the image actually on the screen. So then you've got
color circuits. So on this particular monitor, you've got red, green, and blue hook up here.
And then they run almost, well pretty much immediately, to this connector. You can see
red, green, blue. These first three wires. And they run up here to the neck board and they are
processed through this chip in a couple, a few transistors, some potentiometers that adjust them,
some more transistors that amplify them, and they end up in this, in the neck socket and,
you know, are shot into the tube. So your red, green, and blue, you might have a problem with
like maybe all the red's gone or maybe all the blue's gone or maybe it's everything's real green
or whatever. That's not our problem either. Obviously it's doing that because we're getting
the line in the middle of the screen and usually it'll be white and you'll see like some movement
where the colors change and stuff. That's because the entire image is being displayed on that one
line. I haven't filmed that yet. I've got a feeling if we don't find what's wrong with it,
we're going to see it later whenever we test it. And then you have a sync signal. So you have a
sync area of the chassis that has to basically lay all of that in the right spot on the monitor
at the right time. Remember it's scanning in on the CRT super fast like this from top to bottom
over and over and over again. 15,000 times a minute or whatever we said or 25,000 times
whatever. And just whatever the frequency of that is. And it has to line all that up.
If you don't have that, what'll happen is the image will just move all over the screen because
it'll be drawing it but maybe this time that it draws in, it draws starting in the top left corner.
And then the sync's not working so the next time it draws in, maybe it starts right here and draws
the next time that it refreshes it. And then the next time maybe it draws it over here.
And so you end up with this image on the screen that does this. It'll roll around or it'll just
keep moving to the left because it's being drawn slightly farther to the left each time really
quickly. And you get all these problems because the sync's off. Well, that's not our problem
either because it looks like everything, I mean we don't know, maybe it's screwed up too, but
usually you have one problem at a time, right? So we're not going to mess with the sync right now
because there's no way that's going to fix a horizontal deflection problem. I'm probably
forgetting a couple more circuits that are in it. In a TV, this is a stripped down version of a TV
basically. Now this was designed just for arcade games but the original arcade monitors were
stripped down TVs. The very original ones were just off-the-shelf TVs. They literally just mounted
a TV in the game. But by 1980 or so, the monitor that you found in a Pac-Man for instance was
basically just a modified version of a television chassis basically. I mean they were making them
specifically for arcade games but that's essentially what was going on. So a TV would
have a couple more circuits. So a TV would also have an audio circuit where it gets an audio
signal, amplifies it, turns it on and off, has a volume control, and sends it out to a speaker.
Well most of these arcade monitors don't have that. Of note, the Nintendo arcade monitors did.
They were made by Sanyo. They had a separate little board on the monitor that was
an amplifier for the audio signal and so the audio was sent up to the monitor and amplified
and sent out to the speaker. Then there's a volume knob on the back of the monitor
like a Donkey Kong to turn up the sound. So a television would have an audio section. Well
obviously we don't have that problem. This doesn't even have an audio section. And then there would
be a tuner section where it's grabbing the signal out of the air on the old cat ears.
What do they call them? What's a cat ear? The old antenna bunny ears. Do they call them bunny?
I can't remember what we called them. It would grab it out of the air on the old analog signal
or your cable plugged in to the back of the TV and blah blah blah. So it had a tuner built in
so that you could change channels and tune to the certain frequency on that signal that's coming in
to display on the monitor. On this, it just injects the red, green, and blue straight in
out of the arcade game. Okay, so all of that very long-winded, but my whole point with all that is
if you kind of just have a layman's understanding of that, which I do. I'm not an expert on it,
but I just kind of generally understand how it works. You can kind of tell where you need to
look to find out this to find this problem, right? So is our problem in the power supply?
Probably not unless there's a specific voltage that creates the horizontal deflection
but doesn't create any of the other things. And that's not really a thing because it's
it's... I guess in one way you could say that there is, but it's probably not in the power
supply because the thing's working, right? Is it in the vertical deflection area over here?
Well, no, because it's got vertical deflection. Okay, is it in the color area on the neckboard?
No, we think we've got color. Is it in the sink area? No, it looks like it's in sink.
Is it in the high voltage area, which is the flyback? No, we've got high voltage.
So it's just specifically in the area that deals with the horizontal deflection.
So now we're going to look at the schematics and figure out if we can determine which area
is the horizontal deflection. All right, well, there's different ways you can do this, but
if it's a Wells Garner, you can go to wellsgarner.com. wellsgardner.com. Okay,
so we went to their website and clicked on service and support, and they have actually
a lot of information about the monitors that they've released over the years.
And you can just find your monitor if it's on here. And so if you go here to analog monitors,
and then you go down to a medium resolution, you'll see it right there. Look, here it's our
monitor. 7500, 25 inch monitor. And it says spec sheet. So if you look at the spec sheet,
for instance, it'll show you the original paperwork, talking about it, show you some
of the dimensions of it, show you where some of the controls are on the monitor.
And then it's going to show you some of the parts on the monitor and all that. So that's pretty
cool. It says service manual. So the service manual is going to talk about things like
convergence, how to adjust that, set up the CRT, purity adjustments. Here's the theory of operation.
So it talks about the switch mode power supply, like we mentioned. And then it talks about sync
processing. It's showing a little bit of the power supply. The horizontal circuits, right?
Horizontal sync processing. Horizontal output and deflection. This is where our problem is
going to be, right? So it kind of shows you the area that handles that. Vertical oscillator and
output. Pin cushion circuit, which like corrects kind of curvature at the edge of the screen.
And this circuit is used on the 27 inch monitors only.
Width control, video processing, automatic beam limiting. And you know, it just tells you all
kinds of stuff. It tells you about the different ICs on it, shows you a layout of it, replacement
parts for pretty much everything. And that's it. So that's very helpful. There's just a schematics,
which I've pulled up here for the whole monitor. Block diagram, which just kind of shows you how
everything relates together. Reference voltages, so you can test voltages. And then I really like
this, troubleshooting and repair guides. So they have basically made a troubleshooting guide for
about every monitor they've made. And it tells you some of the common problems. Well, if you look at
the schematics, if you look around long enough, you will find the horizontal deflection yoke. So
we know it's got to be something that connects to this, right? So you get over to here, but the
issue that you run into is you immediately run into the B plus area, basically, or the horizontal,
what do they call it? Oscillator, which is used by the flyback to help create the high voltage that
we already have. So we know that most of this is working. So there's just some little problem
somewhere. Here's where the B plus is created. This is the power supply schematic and all of that.
Here's the adjustment for the high voltage shutdown, which runs, I guess that goes over to
signal on the flyback. Anyway, so most of this is going to be working, which is why it's so hard,
why you rarely see a horizontal deflection problem, right? Because if this wasn't working,
the monitor wouldn't work. But if we look over here at our repair guide that Wells has made,
look what they're telling you is going on. If you've got no video, check these and they'll
give you a little comment. Check your video input cable. If you've got distorted video,
check these and adjust this. If you've got retrace lines with no video, check these and adjust the
screen control on the flyback. If you've got a dark picture, check these. If there's no power
and it's dead, just check these, check the power cable. If it shuts down, check these. If it blows
the fuse, check these. If there's no vertical scan, check these. If the vertical fold over,
which is like the image curls over at the end and you see it twice, check these. If the picture
jitters or is unstable, it might be that. If there's no horizontal scan, wait a minute, that's
ours. So no horizontal scan, they're saying check D708, D707 and there will be a vertical line in
the center of the screen. That's exactly what we've got going on. So they're showing us a place
to look and what they usually do is they will write them in the order of what's most common.
Now this is from the the techs at Wells Garner. They've seen hundreds,
thousands of these things broken and in for repair. It's not a catch-all. Sometimes there's
stuff that's pretty commonly wrong with them that's not even on this list, but it's a good
place to start. So we might want to look at D707 and D708. Wells Garner is saying, hey,
it's a common thing. Well, well, well, I had to bring out the big guns. Everybody's always
saying, oh Ronnie, Joe can't fix nothing. You got to get Ronnie to fix it. Ronnie come in and fix.
Well, I had to look that over after Ronnie got done messing with it. He couldn't figure it out,
C722. Seen it a thousand times. You can even see it's cracked there.
Got me a freshie here and put that baby in there. I think that's going to fix it.
Seen it a thousand times. Ain't going to be broke no more. All right. I got it back in the cabinet.
I'm hoping that's going to do it. I think that it will because that cap was split in half,
you know, that cap that Ronnie couldn't find. C722, I seen it a bunch of times.
Ronnie couldn't find it. He talking that smack time a part swapper.
Let's see if we can turn it on and see what happened here.
Yeah, buddy. Looks like we got width.
Uh huh. Yep. You know what we're going to do?
We're going to make that money. We're going to make that money today. Got to get the money today.
Sometimes you got to do what you got to do. I had to take that monitor board out
to make that money. Everybody knows I'm all about that money. But anyway, we got it all back in
there. It's fine. It's fine. Now we're back where we were and we got money in our pocket. All good.
Anyway, thanks everybody for watching. We'll see you on the next one.