Hi, I'm Mike with House on the Mend,
and in this video, I'm going to deliver on my promise
to review the pros and cons
of the Toppins DK-1000S Solar Powered Gate Opener
after it's been installed for six months.
If you find this video helpful,
will you please give it a thumbs up?
Now let's get started.
If you break it, he will fix it.
If you buy it, he will build it.
House on the Mend.
In October of 2019,
I posted an unboxing and installation video
of the Toppins DK-1000S Solar Powered Gate Opener.
If you haven't watched that video,
I would definitely click on the link above first
and then come back to this one.
I want to start by saying this gate opener
has been 100% maintenance-free since I installed it.
The only thing I've done
is occasionally swept the gravel off the track
and wiped off the solar panels with a microfiber towel.
Through the harsh summer
and admittedly mild winter here in Las Vegas,
there have been zero performance or battery issues.
We even had a five-day period of completely cloudy days
in March of this year and still had no issues.
So there's hope for our friends in the Pacific Northwest.
Depending on your region of the world,
especially colder climates
which can affect battery performance,
your results may vary.
Let's head outside and see what the system looks like
having been run multiple times a day
and practically untouched.
All right, I haven't even come out here
to wipe this guy off, which we'll take care of today.
But I have noticed that when I opened the gate
that this guy is shifting ever so slightly back and forth.
So I think these pillars that I had to make
have come a little bit loose.
So let's take off the cover.
It'll give us a good opportunity to see what's inside
and also to tighten these pillars.
It's just two Phillips screws here.
Little bit of spiderwebs here is about it.
No real buildup in dirt through this hole
or the hole underneath and it's windy here.
It's always blowing, so that's pretty nice.
I got a little socket set here.
Let's tighten up these pillars.
So I went and inspected the whole length of the railing
and they're fine, not a single broken tooth,
not any gouging or any issues with them at all.
They're all still very tightly held in place
from the original install.
No complaints there.
All right, last thing I wanna do
is take a look inside this battery box.
Let's see what our batteries look like.
Has there been any leaking
or is there anything in there nesting or chewing on it?
Let's find out.
It was dirty in there, but we are six o'clock in the morning
and already the charge controller's on
showing that it's charging and no real issues there.
So let's cover it back up and that's it.
There were several months where we had work crews
coming and going from the backyard
and rather than having someone on scene
to run the gate every time they wanted to arrive or leave,
we elected to utilize the little key
that comes with it to unlock the gear
and leave the gate open all day.
It worked great.
Let me demonstrate.
So to do that, there's this little cover right here
that this key goes into.
So you pop that little plastic piece out.
Save it, because you'll want it.
And then the key goes right in there.
There's a little triangular chuck on it.
Goes right in there.
You rotate it towards the front of the box to disengage.
And now it's free to move.
Then you set it back in the right spot,
put your little key back in there
and you rotate it towards the back of the box
and then you can hear it click into place
and you're back into normal operations.
Very handy for when you just wanna leave
the gate open that day for company.
My one and only complaint with the Toppins gate opener
is the included mounting brackets
for the three solar panels.
As you can see in these videos,
the bottom solar panel is not securely held in place
and visibly flops around in the wind.
Let's do a simple modification to rectify this issue.
So to combat this flop caused by a bracket
that's really insufficient, in my opinion,
I went out and got this aluminum angle.
Now, specifically, this is half inch by three quarter inch,
but you could buy any size
that would just dress up this area nice.
And what I did is I pre-drilled the holes
and we're just gonna put it right up here
on the three panels, just like that.
And that's immediately gonna give it some more rigidity.
Got some clamps here to hold it
and then we're gonna screw everything in place.
Now, I've got some self-tapping screws
and I've got them chucked up with a little quarter inch bit
and I'm gonna go through and I'm gonna screw right
into the side of the solar panel.
Now, I pre-drilled the holes in such a way
that when the screws go in,
they're not gonna affect any part of the photovoltaic cell.
There we go.
Now, I'll do the same on the other side.
And while we're out here with a clean microfiber towel,
let's wipe off our panels to get more efficiency out of them.
One of my favorite features
that isn't really highlighted elsewhere
is the pedestrian entry function called midway mode.
When you press the second button on the remote,
the gate only opens about six feet wide.
This is great when you want to enter or exit on foot,
say to take the dog for a walk
or to wheel the garbage cans out to the road.
The same 30 second countdown I selected on the dip switches
applies to this partial opening as well,
giving plenty of time to walk back in
after parking the garbage cans.
In the original installation video,
I mentioned the wireless keypad
was intermittent in functionality in the beginning,
but I'm happy to report I've had no further issues with it
and it's working great.
I would love to hear from you in the comments below
about your experience with the Toppins gate opener.
Have you had any other issues not mentioned here?
I also want to give a shout out to Anthony Marte,
who after asking me several questions about the installation
sent this video via Instagram of his completed install.
Great job, Anthony.
I really liked the way you elevated the battery box
on the solar panel post.
It was a very clean look.
If you found this video helpful,
will you please give it a thumbs up?
It really helps the channel.
Also, thank you to everyone
who has utilized my affiliate links.
I have upcoming projects planned for YouTube
that are partially funded by the viewers
who have clicked on the links and made a purchase.
If you're not familiar with affiliate links,
they're of no additional cost to you,
but I do get a small reward each month.
It helps to justify the cost and time spent
making these videos.
Until next time, thank you for watching.