I'm Mike with House on the Mend.
And this is part three of our ongoing series
where we're rehabbing this rental property
in Bullhead City, Arizona.
And in this video, we're gonna be focusing
on painting the exterior of this property
with this, the TacLife airless sprayer.
Now, I only saw a couple reviews on Amazon
and I couldn't find a single video
on this particular TacLife product on YouTube.
So I decided to buy it with my own money.
I am not sponsored.
It's currently $189 with a $10 coupon.
And this is a comparable device
when you look at the statistics and the specs
to the Graco Magnum X5 sprayer,
which is currently around $330.
So $140 less expensive for the TacLife.
So if you're interested in how it performs
and if it's worth the money,
that's what we're gonna find out.
If you break it, he will fix it.
If you buy it, he will build it.
House on the Mend.
All right.
So this is the TacLife airless sprayer.
Let's open up the box here and see what we got inside.
Looks like the spray gun nozzle,
the unit itself, and that's it.
Let's see what's in the bag.
All right, so the front here is very simple,
just a little sticker.
And if we look right here,
this little blue tip is just protecting
where the hose will connect to,
protecting the threads from that outlet.
If we look on this side,
we have a on-off switch that is covered
with a little clear rubber seal on it.
The pressure control starts at roll,
so you can turn the pressure down enough
to use a roller, which is real nice.
Then you've got the priming pressure,
low spray, and then all the way up to high spray.
On the other side, you have the pressure valve here.
You have, if it's pointing out towards the hose,
it is in spray mode.
Down, which is down traditionally
towards the paint can in taller units,
that is prime mode.
If we look on the back here,
coming out the back, not down,
but out the back are the prime and the feeder hose.
Very long, because it's intended to come up
and then go into a five-gallon bucket.
It does have a screen on the end of the hose.
It's not threaded like I've seen in some units.
Instead, it's got a little pressure fitting here
that you can slip out of the way,
and then you can remove it.
Now, something that is not mentioned
in any part of the manual
is this little cup.
And this isn't for drinking coffee
while it's being primed.
The only thing I could think of that it's for
is there's a little hole right here on the frame
that corresponds with this hole.
And then it came with this Allen wrench
and this little screw.
So I'm thinking, even though it's not mentioned anywhere,
that this is meant to be attached right here.
And then it gives you a spot to set the screen
and the hose into so that it's not resting
on the ground and getting dirty.
About a six-foot cord,
so obviously you're gonna need an extension cord.
Pretty decent-feeling hose.
It's got little spring assemblies around both ends
to keep it from kinking.
Nice weighted, feels pretty good.
It'll be interesting to see
if it gets a little bit more supple and flexible
when it warms up,
because it's very tightly bound, it feels,
just coming out of the package.
But what do you expect from that?
So for the spray nozzle itself,
it comes with a filter, a brush to clean it out with,
and a little rubber grommet.
It'll be interesting to see if that's a replacement filter
or if that's the only one it comes with
and we've gotta put one in here.
Now the nozzle does detach for cleaning the filter,
but interestingly, the manual said
to disconnect this little guy down here,
which was nearly impossible.
It took two wrenches and all my inertia
to try to get these two separated from each other.
And in fact, that is incorrect.
That is not where you access the filter.
Instead, you need to take this little guy off
and then just start unscrewing it from up here.
And then you have access to the filter right there.
So the one that came in the bag is actually a spare,
which is kind of nice.
It's got a nice rubber handle right here.
It almost looked like it was a knurled aluminum,
but it's not, it is rubber.
And then once you get that pretty tight into place,
right here, there is a notch out for a wrench
to give it its final tightening.
So the manual says that in the manufacturing process
and the shipping process,
there is oil inside of the pump
and they recommend that that gets flushed out first
with hot soapy water.
So you have two different lines as we've talked about.
You have the intake line here
and then this little purge line here.
So I'm gonna separate those real quick.
Put one just right down here into the sink,
put the other one right into this hot soapy water.
It's just dish soap and hot water.
And then we wanna turn the dial downward to prime.
We wanna turn the power,
which there's a little arrow right here,
down from high to prime.
All right, let's plug it in.
This will get us a good feel for the sound of this guy too.
All right, we ready?
Right here.
Absolutely nothing is happening.
So I don't see a crimp in our line.
Release, push to free pump.
Let's try again.
There it goes.
Whoa, whoa, whoa, whoa, whoa.
That's not supposed to happen.
It's in prime mode.
That's spray mode.
All right, let's tighten the hose down on the front here.
Since I can't trust it not to come out here
when it's in prime mode right now, let's try again.
These are compression fittings.
So I am not putting thread tape on in the beginning.
If I do get leaks out of these sections,
I will switch over to putting thread tape on first
and we'll talk about if that works.
Let's give it another try.
This thing is really loud, by the way.
All right, let's switch over to rinse water
and we'll rinse all that soap out of there.
Lot of vibration there.
All right, good.
So we've cleaned out the motor.
Now it is time to get ready for painting.
So I'm gonna take it outside, get it set up in a good spot,
get some cardboard or a drop cloth
or something underneath everything,
and we'll get ready to prime the paint.
Prior to painting, there's a tremendous amount
of prep work involved with getting a house ready
to be painted to include scraping, taping, plastic,
and a bunch of other things.
I have a video montage coming up next
of all the things I did to get this house ready for paint.
If you're following along with the overall rehab series
of this house, you may be interested in watching that.
Now, if you're not, however, I understand.
And if you just wanna jump right to priming this sprayer
and painting our first wall,
then you can fast forward right to the time you see
at the bottom of the screen.
So any small areas where we have some stucco damage
like you see here near the sliding glass door,
I'm just gonna mix up some stucco patch
and take care of those spots prior to painting.
And while I'm at it with the stucco patch,
any of these holes here from screws and anchor points
and things that have been installed previously
will get filled up as well.
There's three really old worn-out carriage lights,
two on either side of the garage door,
and then this one by the side garage door entrance.
Those are all gonna be removed ahead of painting.
And of course, we can't forget these lights I showed you
under the eaves in the backyard.
That all needs to come out.
And anywhere along the house where the weeds are,
obviously, all have to be taken out and cleaned up
before we can paint.
So most stucco houses have a drip edge down at the bottom
that separates the actual stucco wall
from the foundation and the ground.
This house was built in the late 1980s
and does not have that drip edge.
The stucco goes all the way down
below the landscaping dirt line.
So I went around with a pickaxe and a rock rake
and I trenched out all the perimeter of the house
and that's gonna allow me to paint
as much of the wall as possible
in case the landscaping ever changes in the future.
You won't have some two-tone color
that needs to be addressed at the bottom.
After that, I power wash the entire house
with my Ryobi pressure washer.
And then every spot where I put a stucco patch
or a tube of caulk that deals with the cracks,
small cracks in the stucco,
I covered those up with a Kilz primer
that specifically says on it
that it can handle masonry and stucco.
Now that all that's done,
there's a few little things left
and we're gonna get to painting the stucco.
This piece of fascia here is pretty rotted
so that needs to be replaced.
All right, this piece of two by four underneath
is in really bad shape too.
Yeah, we're gonna have to fix that.
So the garage door itself,
unlike most doors that are thin aluminum,
this door actually happens to be panels of solid wood.
So it might even be the original door.
But nonetheless, we have cracking, peeling paint on here.
So rather than just taking a sander to it
and to prep it,
I wanna first start by grabbing a scraper,
which is a nice tool you can get both hands on.
Sometimes they even come with a little ball here
you can hold on to.
But all the magic is done with this blade up here.
And what you do is you set it down
and just literally start scraping the loose paint away.
So I'm gonna do that to this door.
And instead of getting down on my knees
when it comes time to do the bottom of the door,
since I have a garage door opener,
I'm just gonna raise it right up
to a nice comfortable level for me to work
and then I'll hit the remote again and stop it right there.
So that way I can be standing
and in a nice comfortable position
to scrape all that paint.
So when it comes time for painting,
we're gonna need warm water and soap to clean up every day.
So this was a perfect time
to change out the water heater.
And what a good decision it was
because down towards the bottom,
it was so corroded that the drain valve
wouldn't drain any water.
And I was puzzled by it,
but eventually what I had to do was tip the thing over
and start draining it from the inlet valves
or the hose going out to the street.
So while this heavy thing gets lighter,
we're gonna set our sights on switching it
with this guy right here.
All right, so I took a drill with a mixing bit
and mixed up the paint really good.
And now we are ready to prime the sprayer with the paint.
So we're going to put the inlet valve right into this paint.
This is an elastomeric stucco paint.
Elastomeric is specifically designed
for stucco and masonry, so it's perfect.
All right, we're set downward to prime.
We are gonna prime the remaining water out of the unit
and into this bucket of water.
And once that is fully paint and no water coming out,
then we'll turn it off and we'll put that back into here
and then we'll let it prime itself
with paint coming completely through the system.
All right, that did not take long.
Let's put this guy right in there as well.
And now we can just prime for like a minute or so
and really circulate that paint through the system
and then we'll prime the hose.
All right, that should be good.
So now I'm gonna switch to spray
and we're gonna start feeding that paint through the hose.
Now, if you remember from when we flushed everything,
there's still water in this line.
So I'm just gonna take the sprayer
and I'm gonna keep it right here, turn the pump on.
All right, so now it's pressurized the whole system.
So I've got it down to the lowest level here
and I just want it to kind of ooze that water out,
but it is very, very pressurized.
Hi, you ready to paint?
I'm just flushing that water out of there.
I'm already seeing paint.
All right, that is all paint.
Okay, now we can, let's turn it off to be safe
and we can connect our nozzle.
All right.
All right, let's reposition the camera
and we are gonna be ready to test out this sprayer.
All right, we're ready.
I wanna start by giving a spray at 12 inches away,
which is what the manual recommends.
And I'm in the middle between a low pressure sprayer
and high pressure sprayer.
So let's just kind of see if that's a good spot.
We can increase or decrease from there.
The kit comes with a 517 tip.
There's also like a 15 and there's other numbers in there,
but that's what this one comes with.
So we're gonna test that one out and see how well it works.
All right, 12 inches away.
We don't want to go and in.
We wanna keep at 12 inches and stay as steady as possible.
So let's see what we get.
All right, so I am turned the wrong way for that.
Let me just twist this guy this way.
You can see that was a line going that way,
meant for going up and down.
So now I've turned it like this and let's see.
Okay, real quick.
Let's take a look at what kind of spread we get
at that 12 inches away.
I think it starts right there.
It's about 16 inch.
Yeah, about a 16 inch spread
with this nozzle at 12 inches away.
Just so for a point of reference.
All right, now I have taken off my watch.
I've got some older sunglasses on
and I'm gonna put on a respirator
and let's do this patch of the wall right here
and just get a sense for the sound of the unit,
how well it sprays and all that.
All right, well, that went really quick, was real easy.
The coverage looks really good and smooth
other than this one spot where I started right here
and had the nozzle twisted the wrong way
and it's kind of gummy here.
So I'm gonna feather that out real quick
and the pump is very similar to what I'm used to
with other airless sprayers.
It is kind of loud.
So I think I'll put some headphones in
and get some music going.
I tried getting a little bit close
with just the sprayer up here
and I see a little bit of overspray on the Eve.
So I am gonna get a flat edge for painting
and stick that up there before I get any closer
to any of these other areas.
So let me take care of this goopy spot here
and then grab that flat edge
and we'll get going some more with the time-lapse.
So look at this.
I had just swept this whole sunroom
before we started painting.
So the tape and things that I did around the flooring
would adhere better.
And after spraying, look at all of this
like paint dust that is all over.
You can see right there where I had paper
and tape wrapped around these pillars,
this stark line there between the concrete and the dust.
So that's a tremendous amount of like paint dust
coming out of this sprayer.
It might just be this elastomeric paint
or it might be all paints that aren't adhering
right to the surface.
So man, I really recommend a respirator
because this is nasty.
That is strangely satisfying.
All right, so we finished spraying the exterior
of the entire house and I've gotten a pretty good feel
for how this sprayer works.
So I wanted to give you kind of a midpoint review.
Number one, this spray tip seems to get clogged
quite a bit and not inside where you can just turn it
and spray out the clog so much as the paint starts drying
on the exterior of the nozzle
and you got to kind of peel that away.
And if you don't, I've found that it starts
causing two little spray lines,
like focused paint in your spread
and then it kind of diminishes the central area.
So you'll get a line going here, a line going here
and a diminished amount of paint in between those.
And I've been able to remedy that by pulling
that drying kind of almost like rooster head
of drying paint on there.
So that might just be this elastomeric stucco paint.
We'll find out when we get to doing the doors next.
Also, I will say it's really important.
I have found to clean out this filter
that goes inside the handle after pretty much every use.
I found some sort of little tiny pebble like debris.
I'm not sure if that's the paint or what exactly that is
but this filter is doing a good job
of keeping that out of the nozzle
but it does require it to be cleaned up after every use.
So one of the thing I'm noticing
is this soot or burn or dust.
I'm not sure exactly what that is.
It doesn't really have a much of a smell on it.
Maybe it's oil, but whatever it is,
it's charred around the exhaust fan here.
All right, that's it for today.
We made really good progress on the backside of the house
including this sunroom.
So now it's time to clean up.
So what we wanna do is take the main line
that's the inlet, which is the bigger one.
We wanna bring that out of the paint, separate the two.
It's nasty.
That's why I like to use gloves when I do this
because this paint is really thick.
All right, so into the hot soapy water goes the inlet
and we're going to circulate all the paint
right out of the pump itself.
So we gotta keep a good eye on this outlet line.
Let's turn it down.
All right, that's starting to come out with water.
So at that point now we can join these two back together
and just go into circulating the hot soapy water
in and out of this bucket.
So let's do that.
All right, I edited that down
so you didn't have to sit and listen to this thing
go the entire time.
It's pretty loud.
I let that circulate for at least a minute or so
to really try to get all the paint that we can out of there.
Now, I'm going to take these two out
and slip them in a little temporary coffee can
while I go get fresh water
and I want to circulate fresh water through the pump.
And then ultimately, after we do that,
we're going to push the paint out through the hose
with fresh water and we'll push that paint
back into this bucket.
And at that point we're done for the day.
We're going to let it sit in that fresh water,
both in the hose and in the lines
since we're going to come right back tomorrow
and get to painting.
If we were going to transition over to long-term storage,
then I would definitely use a product
like Graco's Pump Armor, which is really good
to circulate through both the pump.
And then I also like to run it through the line
and it just protects everything.
So when you come back, say a week, a month, a year later,
everything inside internally has been protected
by Pump Armor, really works great.
Now, while I'm here with the hot, soapy water,
I am going to take the nozzle off,
clean the nozzle and the tip most notably
to get all the gross paint
that's starting to dry in there out.
Before we switch over to clean water,
since we've got hot, soapy water here,
I did want to also say that we should get down here
and wash off the filter
and all these little fittings down here.
I'm not so concerned about this area up here.
That's really hard to keep clean
because it's actually outside of the bucket
and this paint dries,
but you could take a scrub brush to that if you wanted to.
It doesn't affect the functionality,
but you do want this filter to be nice and clean
like you see here and not have patches
of paint stuck in there.
All right, so the paint I chose is a very similar color
and that way it's subtle enough
that I can tell when I've put it on,
but not so much that I have to worry
about every single little detail getting covered
with a brush that'll get into tight corners and things.
So I replaced the inner two-by-four
with this piece of pressure-treated lumber,
and you can tell it's the pressure-treated lumber
because of all the little hash marks in it
that are used to puncture the wood
to inject the fluids in it that help to sustain it longer.
And I painted it the same color as the trim
so that you'd never know it was there.
And then I went to the store and I got this piece of fascia.
It was about three or four inches wider,
so I cut it down and painted it as well.
And then so you don't see screw holes,
I'm actually going to attach it
with nails that can be painted over.
I'm gonna slide that under this piece of metal trim,
right level with this piece of fascia, just like that.
Now I'm gonna take a couple more nails
and I'm gonna reattach this piece of fascia
to the inner two-by-four that we replaced.
And this'll be all done
except for touching up the nails with paint.
So I cleaned this door with TSP really good,
and then I sanded the frame around it
and cleaned that as well.
And if you recall when we replaced this door,
it is so heavy that instead of taking it off the hinges
and setting it somewhere to spray it
with the airless sprayer,
I'm just gonna roll some paint on it in place.
So I've taped off the window
and this'll be a lot quicker and easier
than taking it off and having to muscle it back on
and all that.
So we've completed the entire exterior of the house
with this paint sprayer and it has done a great job.
Now, I wanna give you my midway thoughts
because I think I'm gonna use it again
when we move into the interior of the house.
But our midway observations,
I wanna say that I didn't experience any leaks,
not here where the handle and the filter are kept,
not with the hose either at the handle or down here.
So that is great.
Remember I had talked about whether or not
we would need thread tape, you don't.
These compression fittings are fantastic.
Let's talk about the paints.
So this typical exterior paint
that I used for the garage door was fantastic.
It was a pleasure to spray
and it was something I wasn't used to
because before I had sprayed the garage door,
I had been spraying the entire exterior of the house
with this elastomeric paint.
Now this stuff is admittedly really thick and stretchy.
This peeled off of the little guard here
and it's just one big strip of very strong plastic.
So the fact that this paint sprayer struggled a little
with this type of stucco paint really doesn't surprise me.
I will say it handled it.
It did this entire house.
It just had a problem keeping up the pressure.
So as I would go with long strokes down the wall,
I did notice the pressure would fall off a little
and I'd have to release and wait for it to build back up.
I did not experience that even once
with the thinner typical exterior paint.
So that's just something to keep in mind.
It handled it fine.
If there's another type of paint sprayer
that has more PSI than this one
and it's really important
that you are using only elastomeric paint,
maybe give that other one a try.
But for typical paints,
you're not gonna have any worries.
It's gonna be a little bit before I get to painting
on the interior of the house.
I'm gonna be doing some prep work on the walls,
washing everything down
and just really seeing what we have to work with.
So in the meantime, I did take some Graco pump armor,
which I love.
It works great.
And I cycled that through the motor itself,
the pump itself, and then all the way through the hose
and I have everything shut off
to keep that pump armor inside.
That will keep everything lubricated
until the next time I break out this paint sprayer.
So if you have any questions or comments,
please put them down below.
I'm gonna leave affiliate links
to everything that I used here.
Now, full disclosure, these are affiliate links.
So if you click on them and end up making a purchase,
it won't cost you a thing,
but I do get a small reward at the end of the month.
It helps to justify the time and expense it takes
to make these videos.
Until next time, thank you for watching.