It’s time to dispose of leftover paint you have - what is the right way to safely throw that leftover paint away? We’ll show you the best ways to do that - without harming the environment!
It’s easy to get a stockpile of leftover paint. The day comes when you need ti get rid of it, but you want to do it correctly. Good for you, but what are some paths forward?
Water-based paint, usually known as latex or acrylic, is relatively easy to dispose of. The paint needs to be dried before putting it in the trash. We’ll show you some ways to do that.
Oil-based paint is another story. These paint and finishes are hazardous materials that must be disposed of at a designated waste collection site. Many cities host annual waste collection days when oil-based paints (and water-based paint too!) can be disposed of. Many landfills, especially those that serve many communities, will have a designated drop-off area for oil-based paint as well as other hazardous materials such as batteries, solvents, pesticides, and herbicides.
Now, on to “latex”, “acrylic” or “water-based” paint. This type of paint has become the most popular for its ease of application, low emission of VOCs (volatile organic compounds), and ease of cleanup of tools, brushes, and rollers.
But, just because the paint can be cleaned up with soap and water (at least when it is wet!), doesn’t mean that it is harmless to the environment. That paint is made up of pigment (for color and opaqueness), binder (also known as a coagulant), resin (emulsifies the pigment and keeps it in suspension), and water (as the solvent for all the ingredients).
If the paint is liquid when placed into the waste stream, there’s a possibility of leaching into groundwater or causing a mass of trash that will be very resistant to degradation. So, the paint needs to be dried before disposal.
Whatever method you use, leave the lids off the paint when you put them in the trash container. If there is a visual inspection by the trash pickup personnel, they can see that the contents have been treated and dried.
There are several ways to dry paint, including:
Pour out a thin layer onto sheets of newspaper until dry then discard. This is inexpensive and uses material that was going to be discarded anyway. However, if you have a lot of paint, it takes lots of room and time. Shred newspaper and mix it into leftover paint until the liquid is absorbed. Leave the lid off until dry and throw away. This is cheap, and pretty fast, but it is best for smaller amounts. If you have a paper shredder, you can use the shreds this way too. Kitty Litter or oil absorbent can be used to sop up the moisture in paint to be discarded. It’s readily available and pretty inexpensive. The trade-off is that it takes a lot of kitty litter or absorbent to absorb all the moisture, so if you have an almost full can of paint, you could end up with 2 to 3 cans of kitty litter/paint mixture. It’s heavy too! Sawdust or small woodchips can be used. If you have a good source, it’s cheap. Just be aware it takes a lot of it to properly wick up all the moisture, and with that comes bulk. This is best used for cans that are ⅓ or less full. Air Dry. You can pry off the lid and let it sit for a week or two. This only works with minute amounts as the paint will “skin” and form a dry crust, but will significantly impede the drying of the whole batch. You’ll need to stir up wet paint to the top to get all of it dried. Paint Hardener can be purchased from your favorite paint supplier. This is sold in packets that will harden up to ⅔ of a gallon at a time. These usually contain sodium polyacrylate (Geek note: Sodium Polyacrylate is a sodium salt of Polyacrylic Acid) and the salt crystals absorb moisture very quickly and turn the paint into a thick, rubbery mass. At the time of filming, the paint hardener was about $2.50 per packet. The material is listed as safe when properly handled. It acts quickly, and it is very convenient. Coconut (or “coco”) pith, sold as a paint cleanup and drier product by Eco Industrial Solutions, is packaged under the name Spill Bully®. At the time of filming, a ½ pound (.22kg) container of the product cost right at $13 U.S., with the package stating, “Cleans 2 Quarts.” Coco pith is also known as coco peat and is made from the husks of coconuts. In contrast, coco coir is made from the fibers of coconuts. Coco pith is much more absorbent than coco coir - hence it’s used for spill clean-ups and paint hardening.
Whatever method you use, thanks for making the effort to properly dry and dispose of your waste paint! You rock!
Dirt Farmer Jay here from DirtFarmerJay.com.
When it comes time to dispose of paint like this,
is there a correct way to do it?
You betcha there is.
Stay tuned and I'll tell you all about it.
Dirt Farmer Jay here from DirtFarmerJay.com.
We all had the problem before where we end up
with a pile of leftover portions of cans of paint.
And when it comes time to dispose of them, what do we do?
Now, there is a proper way to dispose of this kind of paint,
but the scope of this episode really is about latex
or acrylic paint, not oil paint.
If you've got oil-based paint, that is a specialized thing
and you'll find that your municipality community
most likely has a drop-off collection area
and they're very specific about that.
You can't just drop it off in the garbage can
or put it, let it dry in some way and throw it in there.
That's probably illegal.
But let's stick back to this right here,
acrylic or water-based paint.
Now there's different ways that you can dispose of the paint
but they all boil down to the same thing.
Let me give you just a little bit of science
and tell you why we need to do
what we're gonna do in a moment here.
Acrylic paint or water-based paint
is what's called an emulsion.
And you are used to seeing emulsion.
The last time you got some Italian dressing
and you put in oil and vinegar and other spices,
well, you essentially took oil and water
and you had to agitate it till it would mix.
That's called an emulsion.
Paints are like that as well.
The solvent is water and the resins, the color,
all that sort of thing is the oil side of it.
And they are done into emulsion and mixed in such a way
that when the water dries off,
you end up with something that's colorfast and durable.
And over the years, this has become the primary type
of paint that's used both commercially
as well as residentially.
But here's the issue.
What you need to be sure is is when you take it
to be disposed of or you throw it out,
you need to remove the moisture from it.
And here's why.
You do not want wet paint in the landfill migrating
through the mass of the garbage
and creating what's called a leachate.
And that leachate can make itself eventually
into the water table even though there's membrane liners
in the landfills, there's always a risk of punctures
and tears and some kind of compromise.
So it's better to solidify the paint
so it will not move once it is disposed of.
Now, if you've got very small amounts of paint,
you can simply open the lid, let it dry,
and make sure that it's dried all the way through,
that there's not anything left.
Or you could, if you had a small amount,
you could take newspaper or butcher paper
like what we have here, pour it out on a sheet
and let it dry completely,
and then wad it up and throw it out.
If you are gonna dispose of it in the can,
you've gotta leave the lid off.
So if the sanitation workers do happen to look in there
or loading, they can see the can lids are off
and the contents are dry.
All right, we're gonna use four different methods
to dehydrate the paint.
That is, remove the water out of it and solidify it
or make it into a mass that won't migrate.
This is just standard kitty litter.
It's a clay-based type of thing.
You can even see the nice little crystals in it
to make it smell better, which doesn't matter in this case.
But we're gonna use some kitty litter
to see if we can get it to absorb
and how much it takes to absorb this amount.
So this first one's kitty litter,
or you could use oil absorbent
that's sometimes used for under cars
or to clean up oil leaks on the slab or that sort of thing.
But that kind of material, that's number one.
Number two are ground wood products,
sawdust, saw powder, wood chips.
This happens to be pretty fine from a vacuum system,
but it could be shredded also,
something came out of a table saw.
But again, we're gonna take this
and see if we can overwhelm the water in it
and how much it takes approximately to get it to dry up.
The next item is either shredded, just regular office paper.
It could be shredded newspaper.
This happened to go through an actual office shredder,
but you could also do where you're ripping up
shreds of newspaper, anything to absorb that water
that is the solvent in the paint.
So that is number three.
Number four is an actual product.
This happens to be from Home Depot
called Waste Paint Hardener, and it uses crystals.
The same kind of crystals are highly absorbent
that get used in disposable diapers.
This is also the crystals that you'll see
that are mixed into potting soil for container plants
to hold water and release it slowly.
And it's used in different places across industry.
It's not toxic and it sucks up a lot of water very quickly.
So let's go ahead and just do a little bit of a test
on each one of these.
What I'm gonna do is I'm gonna fill up
to about the lower line on each one of these
with the material we're gonna try and mix it in,
and we're just gonna look at the results
and approximate how much more it would take
to actually bind up everything, allow it to dry,
and then go from there.
And we'll do that with each of these very quickly,
and then you can just see the results for yourself,
and you can figure out what's the trade-offs
and the economics of each of these,
and then you can decide which one to use
to safely dispose of latex paint in your landfill.
Here we go.
Okay, here's the first one right here, kitty litter.
We're gonna fill it right to this line on each one,
and then I'll mix it in.
We're gonna go ahead and pour it right there,
right up to the line.
Let's shake it a little bit.
There we go.
That's on top of, you can see just sitting on the paint.
Let's use a stir stick, and what we're gonna do
is work to incorporate the kitty litter into the paint.
It's still quite wet, so this would still not pass
as far as going into the garbage can.
And just as a second attempt to give it a fair try,
we're gonna go ahead and mix some more in
just to see what happens, how much more.
You can see it's starting to dry
and suck out the moisture and immobilize it.
So it looks like it's still, you can hear it,
it's still pretty wet under there.
This still would not be dry enough.
You would have to mix some more.
And I would say, even though it feels like
it's really pasty, it's still very wet.
That is not dry enough.
You would still add probably double the amount
of whatever paint you're soaking up.
So if you had a half gallon, you would probably end up
with a gallon total of clay, and you can see,
if you look, some of the paint is coming up from the bottom.
It's still very wet in the bottom.
So we'd have to add a significant amount more
of kitty litter, and this would probably grow
from this container to probably two.
So that gives you just an idea of the quantity
of the trade-off.
One of the things to keep in mind,
you don't have a way to sense this,
this is pretty darn heavy.
Why?
Well, this is an earthen material,
and so it's kind of like very heavy.
And so I'm gonna get, so you can see it getting wet
on the top, it's oozing.
So it'd take quite a bit more to make it totally immobilized.
I'm gonna estimate that's a two to one ratio.
In other words, it takes twice as amount in volume,
or one and a half, something like that.
If I started with paint here, brought it up to here,
by the time I was done, I'd end up with two containers.
And it's pretty doggone heavy.
So that gives you your first choice in the results.
All right, method number two.
We're now using wood fibers, ground wood fibers.
I'm gonna take the same approach.
I'm simply gonna put in the volume to bring it up
to that top ring, and then incorporate it in,
and let's see what happens.
There it is.
Let's go ahead and add more.
All right, this is doing a pretty decent job
of absorbing the amount, but it's still a paste.
It's still wet.
So you would need to continue to add.
And I would say to get it to where it's completely immobile
and dry, maybe one and a half of these containers.
So if you have a good access to wood powder, wood chips,
the bigger the chips, the more you'll have to put by volume
to get it to absorb.
But this is a good way to do it.
We've immobilized most of it.
I can see it starting to set up,
and we could add a little bit more.
So that's a pretty good way to approach it
using that kind of powder.
All right, the third method is to use shredded paper.
Let's look at this paper fiber and just see
how much of the moisture it'll sop up initially.
This is a little bit messier,
kind of tends to fall over the place.
So I'm gonna fill it up right here.
Let's go ahead and mash that down in there.
As you can see, it goes right into the bottom.
We get that in there.
Let's add more.
So far, this by volume is absorbing
the least amount of moisture.
So as I stir it down here, you can see the fiber in it,
but it's not sopping up a lot of paint.
A fair amount, but not a lot.
Okay, we took by volume one of these whole containers
right here, mixed it into this,
which had paint up to the mark down here,
and you can see how very wet that still is.
So of the three methods,
this is gonna take the biggest volume to feed this in.
I'm going to estimate you would end up
to get it locked up and dry,
you would need to have four containers worth.
So this would grow from being a partial single container
volume-wise to 4X total, somewhere in that range.
Might be more, might be a little less,
but you can see right here, that is really still wet.
So it's gonna take quite a bit.
Now, let's talk about method number four,
using a waste paint hardener.
This is a substance that absorbs lots of moisture,
and let's just see what it takes.
Now, what I'm not going to do is pour in this whole packet.
Now, this packet, as far as economics goes,
is about $2.50 for this packet.
It promises to absorb up to 2 1⁄3 of a gallon of paint
and solidify it and make it ready for waste stream disposal.
So I'm not gonna take that whole packet,
which is 3 1⁄2 ounces or about 100 grams.
So I'm not going to do that and pour the whole thing in.
I'm just gonna estimate, I'm gonna pour in about half,
which is actually still too much,
and we'll stir it in,
and you can see right off how it responds.
Here we go.
As you can see, it almost looks like
I'm just sprinkling salt in there or sugar.
It's kind of the same consistency,
and I would say that's maybe almost half of the packet,
the third, something like that.
So there we go.
All right, I've got that in there.
You can see it.
It's just sitting on top,
but let's go ahead and stir it and watch what happens.
Okay, it's been about three minutes,
and as you can see, that crystal has sopped up a lot.
We did not add any more.
This was the original amount you saw poured in there,
but it takes a few moments for those crystals
to do its work,
and you saw we did a relatively small amount,
and I'm reaching down to the bottom and pulling up.
This is what you get.
So this is now locked.
It won't move.
It's still a little wet, and it can dry out.
If you wanted to, you could add some more
and put it in a pile, let it dry,
and then just dispose of it in the regular waste stream.
So here's a recap really quickly here.
This has done a good job of sopping things up overall.
It's actually gripping onto the stirring stick,
and you see the solid blocks forming,
but it's continuing to weep additional moisture at the top.
So I would have added more in a real situation,
bind it all up so that an hour later I can get rid of it.
This is kind of a cool thing.
This dusty type of thing incorporated in there
really has bound this up.
And will it dry?
Look, there's still more powder down there.
Yeah, it'll dry, and it's certainly,
if I stick that in there, it's not migrating, right?
It's not creeping.
So that certainly would lock up.
But again, for safety, I'd expose these to the air
and let them just dry really well
before I put them in there,
and you don't need to worry about it pouring out.
This one right here is gonna take
the most amount of material,
and as you can see, it's still very wet,
and it would take a lot more of this mixing it.
And so you're gonna end up with large pails
or large amount.
I'm not sure the trade-off's worth it,
but if you got a lot of shredded paper
and that's what you wanna do to recycle that, go for it.
This right here for the price and the speed,
this would probably be my preferred approach here.
A little bit does a lot.
And within a short time, we are now getting
where it is starting to lock up quite a bit there.
See there?
It almost will hold the stick.
There we go.
So it's actually continuing to react, dry in,
harden up in a very short period of time.
So you could probably same day, same afternoon,
dispose of paint that had been treated this way
to get it out there.
Well, now you know the right way to dispose of paint,
and make sure that when you do,
when you put those buckets into the garbage,
leave the lids off just in case there's an inspection
to make sure that you don't have closed containers of paint
going to the landfill.
Just keeps everybody safer and be a good neighbor.
You can do that.
All right, now you know how to correctly dispose
of these types of paints,
but what if you wanna get a beautiful finish
on a surface using spray finishes?
Well, check out this video we produced
that shows you how to get flawless results every time.
And while you're at it,
check out this other video from our catalog
that YouTube thinks is right up your alley,
is your interest, and we'd enjoy it if you'd watch it too.
In the meanwhile, this is Dirt Farmer Jay,
being a great citizen.