Hi, I'm Mike with House on the Mend, and in this video we're going to be reviewing the
Wild Badger 20 volt cordless string trimmer and blower combo. So let's get started.
Now, I'm not paid nor sponsored by Wild Badger. They simply reached out to me
and sent me these two tools for my independent review,
so let's unbox them and see what comes in the package.
All right, here's everything that comes inside of the box. You have two pieces for the blower
and three pieces and some screws for the trimmer. Let's start with the blower. The main motor
portion when I pick it up is a very lightweight, cheap, plastic feel to it. It does have a
rubberized grip that is really nice. These stickers for the on and off switch are very
cheap and look like they're going to fall off at any moment. As I flip it over, this is the
intake where it's drawing the air in to blow it out, and it's a pretty dense screen. I'm not sure
how much restriction that causes, but you're not going to worry about clothing or anything
getting caught in that. When I look at where the battery slides in, I do see three metal prongs.
That means you have a positive and a negative and also an information sharing. So I like to
see that. That means that the tool and the battery can communicate heat and depletion levels
and all that, which tends to lead to battery longevity. So I like that. All the stickers
that are on here are of a very kind of low quality and look like they're going to fall off pretty
soon. Same as the one here on what they call the blow tube, and that sounds like a translation to
me, but on the front of the blow tube there's a removable piece that actually turns upwards the
the airstream and just clicks on right here. Both of the ports here are roughly the same size, a
little bit more restriction, so mostly just it's a directional change. To install this on the blower
itself, it couldn't be simpler. There's two little openings here and two little clips on the outside
sides of the blower, and then it goes really easy. The battery fits on the back here,
and it was on. Clicks into place. To remove the battery, simply squeeze the blue button,
and off it comes. Nice and easy. Not a very high-pitched sound, pretty comfortable sound.
We'll test this guy here in a little while. Next, let's turn our attention to the string trimmer. It
comes in three pieces. The first thing I noticed about the handle was on one side it looks very
finished, a nice rubber handle, but as soon as you grip it you feel uncomfortable because the
back side is completely open and quite jagged. In fact, there's a lot of pieces on here that are
unfinished and jagged where the injection molded plastic comes together. I will say the grip
is rubberized and feels really nice up top here. Speaking of that, you have a safety button that
you push in, and then you pull in the trigger and off it goes. I wish that was ambidextrous, but
it's really meant for a right-handed user. While we're up at the top, two things I noticed
on the bottom side here. Number one, same as the blower, you have the three prongs to communicate
with the battery, which I like to see rather than just supplying power. And if you look at this
sticker right here, it is not only a kind of cheap-feeling paper kind of sticker, but it's also
off-center, so quality control for the stickers is pretty non-existent. This mount right here in the
center is for the handle to go into, and it simply unscrews with this threaded little three-pronged
bolt, and then you insert the handle wherever you like. It's 180 degrees of adjustability.
Tighten that back into that position. If we turn it around, there is a groove in this portion of
the stem that the handle is in, like a slot, and you can push that forward, not easily,
but if you move it back, it tears up the sticker. That's right here with all the precautions and
makes the whole thing look awful, so that wasn't well thought out. Moving up the stem towards the
head, this portion right here is extendable 14 inches, so you should be able to find between
the adjustability of the handle and the adjustability of the neck here some spot that
is a comfortable height for you, and this little locking device here is very secure. You cannot
budge that once you tighten that down. All right, next thing we have is this button here that says
push, so let's push, and what happens is that allows it to pivot 180 degrees and then
lock into position. I'm assuming that's for the edger function, but we'll find out once we start
using it. Push again and rotate back. First thing I notice when I look at the head is that there is
only one piece of string coming out. Typically there are two, and according to the manual,
this is 1.6 millimeter string line, which equates to 0.063 inches. That's among the thinnest
of the available sizes. Usually they're about 0.08, 0.085, 0.09 in that range. I was able to
easily locate several brands to choose from on Amazon, but the fact that it's among the thinnest
lines and there's only one coming out of the head all denotes that this is a very light duty
trimmer. This button that you see on one side is also on the other. You have to push both to adjust
the head. There are five markings right here, little hash marks, and those coincide with the five
spots that you can adjust the head. So very adjustable. You should be able to find a
position between all that adjustability that is quite comfortable for you. Now if you flip it
upwards, upside down like this, you'll be able to easily install the guard. The guard comes around
this way and there are four little spots that easily line up in only one way for you to secure
that. And then it comes with three screws that you need to put into three of the slots. Now if
we come around the guard, you'll see right here is the string cutter. You can see the arrows
denote the direction. So the string comes out and is going to get cut by this blade right here.
From the center of the head out to that blade is six inches. So since it's only one string,
you can't really call it a 12 inch trimmer, but I guess if you hold it still, it's going to cut
in a circumference of 12 inches. Finally, let's turn our attention to the batteries
and the charger. So the unit does come with two, two amp hour batteries. That's a nice sized
battery. The feel and finish of the battery is really good. In fact, markedly different than
the rest of the tools. In fact, just the shipping caused this blower to get all dinged up. There's
marks all over it, just from tumbling around in a cardboard box. Whereas this battery feels
really nice. It almost makes me think it was constructed in a different factory and then,
you know, labels added later. The front of the battery here has a battery life indicator. Coming
from the factory, it has 75% charge. To charge it, you have this included wall charger. Plug it into
the wall and then this little guy slides right onto the battery itself. If you look closely here
on the charger, it says that it is a 21 volt output, 470 milliamp output. That's kind of a
hidden way of making you do the math to find out that it is a 9.8 watt charger. So that is very low.
I'll be interested to see how long it takes to charge a completely depleted battery after we've
done some testing. Because with a battery charger that has that low of output, it's probably going
to take a while. Nonetheless, let's take the battery charger and the battery inside, see how
long it takes to charge, and whether or not it raises the temperature of the battery to any kind
of alarming rate. All right, I don't see any indicator lamps on the charger itself, so I believe
we'll only be going off of the battery life indicator on the battery that's currently showing
three bars. So let's plug it in. Yep. Start. Take a temperature reading. 72 degrees Fahrenheit.
Wow. Two hours and 26 minutes to charge a battery that was showing about 75 percent or so of charge
seems really long to me. But no surprise, 73 degrees, it didn't raise the temperature at all
when it charges that slowly. So the operating instructions are exceedingly poor when it comes
to describing how to lengthen the cutting wire. And in most units, in my experience, you just
thump the head on a flat surface such as a sidewalk and it'll lengthen it. In this case, that is
not what you do. There's a little button right here. You press that and it lets out maybe a
quarter inch or so at a time. And then when you when you turn it on, it will rotate around
and cut that off. All right, I figure we'll start our testing right here in the front area
of our yard by the front gate. There's all kinds of like alfalfa that sprouts up here every year.
The first sound you'll hear once we kick it on is going to be that string whipping around and being
cut off by that cutting blade. Now for me, what seems comfortable, I'm six feet tall, is this arm
fully extended. And then I have the head raised all the way up and then down one click. And with
the handle right above the sticker that got torn, that seems to be pretty comfortable. So we're
going to try that out. Now I have hearing protection right here. I'm going to start out without it
because I want to hear what this sounds like. But I definitely have long pants, good shoes, and
eye protection on. All right, let's see what happens. I'm going to press in that safety button
and then pull the trigger. You hear that? That was that piece being cut off.
Not very loud at all. All right, first thoughts. It did just fine. It's not very loud. Let's take
a look when I turn it over how much of the cord we've lost. Looks like about an inch of wear on
the cord. This is like a very thick but soft kind of weed and it's got a lot of moisture in it and
that's all been kicked and spread around. But the guard is towards the back so my boots and my pants
are free of really any debris, which I like. So while we've got it turned upside down, I might as
well lengthen this and get it back to full length. So what was that? About 30-45 seconds of use wore
it down about an inch. And to be fair, it did get back here and strike against our cinder block wall
a little bit. You may still see a bunch of stuff here. That's because I have an irrigation line
that I'm going to need to move out of the way and then cut some over there and move back this way
and cut some over here. But what I did safely cut to not hit my irrigation line did pretty well.
Let's move on and see what else we can get going. Now my plan to test battery life is to use one
battery to cut everything we can find with the string trimmer and then use the blower to clean
up our walkways. So let's see how we do. Here's the beginning of a couple tumbleweeds.
So these are a little bit tougher, a little bit more of a woody base on them,
and they completely went through this stringer. So let's go ahead and lengthen that back out.
Well we're back here by our well and there's all kinds of tumbleweeds and other weeds
taking root here. It's been a very wet winter so I don't want any of this stuff really taking
root around the plumbing to our well. Now look at this. Just by about five minutes or so of use,
the vibration has loosened the extendable arm here. So I have to tighten that back. All right.
All right, well it's getting through these but you can hear it bogging down like it's a little
bit underpowered and about half of the string has worn away. Battery life is only down one bar so
far. That's good. I'm curious to see what's faster, this string trimmer or me with just a
regular handheld hoe. All right, I haven't even sharpened this guy yet this season. Let's see
how he does on a couple of these little baby tumbleweeds. Much quicker. How about these little
tufts of grass? Some of these it's just one quick stroke. All right, getting around this main feed
line with a string trimmer would be really dangerous. So it just doesn't have the finesse
that you can with the hand tool to get in here. So let me take care of this with the
hoe real quick. All right, I know you came here for a string trimmer review, so enough with the
hoe. I just wanted to demonstrate the point that sadly it's not always the power tool that gets
the job done the quickest. Oops, softball. All right, four or five bushes cause this line, this thin line,
to be about three quarters of the way gone. Let me stop again and lengthen it. All right, I'm a
little more impressed with the edging function. So we want to be holding it comfortably but have this
wheel be on the ground. How do we do that? We simply press that button that I showed you earlier,
rotate the head 180 degrees. And I like the head being up like this as much as possible.
And from that point you start the tool and just roll down the edge of your grass.
Take care of those two weeds right there. And here's a view from the opposite direction of the tool.
Real manageable, easy to go backwards and forwards. It works good. All right, let's switch
our review attention over to the blower with the same battery we've been using on the string trimmer,
which is only down one bar so far. Now, whenever I'm dealing with dust particles, mold spores,
paint spray, anything particulate in the air, I always wear a filter. If you have just a straight
kind of fabric filter, that's fine. I do a lot of kind of dusty conditions with sanding and
all kinds of stuff. Anyway, I really like these two filter sets. They are very comfortable. They
don't put a line across my face and the elastic doesn't break like the little ones. I've also got
hearing protection and eye protection. So the blower did really well on pavers and concrete,
basically any hard surfaces. But as you can see here, it struggled to the point of not even being
useful on turf. The leaves wouldn't even move until you got really close to them for several
seconds. So it has its usages, but it's quite underpowered for grass and turf. Now I want to do
a battery life test. Let's see how long a fresh battery will run this blower. I have it clamped
to a sawhorse and I have a timer on my phone ready. I'm going to actually move this into our
garage so our neighbors aren't listening to the droning of this blower the entire time. So it cut
out after about 23 minutes, but watch this. If you hit the battery life indicator button,
it turns on for a minute. Same test with the string trimmer.
Just over an hour, we're still going. Sounds like it's winding down a bit.
I can't tell how many because they all light up. Well, according to the manual, a completely
depleted battery should take four hours and 25 minutes to charge. So let's plug it in and
find out. And after four hours and 22 minutes, all the blinking stopped, indicating that the battery
is fully charged. Well, I think that's enough testing for me to give you the pros and cons.
First, the pros. The battery life when I was actually using the tools was very good. Throughout
all my testing where I was actually using the tools, we only dropped like one or two bars.
Now, sure, you can argue that 23 minutes of continuous runtime before the battery dies on
the blower is not enough, and I won't argue with that. But as I was actually using it,
I got all the cutting and blowing I needed to do in my yard with easily one battery.
Speaking of the battery, I always consider the battery platform whenever recommending a tool.
And in addition to these two tools here, there are several others using the same battery, so
that is a positive in my book. Both tools are very lightweight, so I think a person of any size will
be able to easily manage them. And I like that when you consider some of our maybe smaller or
more elderly gardeners out there. They shouldn't feel intimidated by the size or the weight of
these tools because they're just right for those kind of folks. I also found the string trimmer to
be well balanced, and I really liked the function of the edging. I thought that worked really well,
much better than it did as an actual string trimmer. Now the cons. And I think the one word
that could summarize the overarching problem I have with these tools is underpowered.
The string trimmer was underpowered. The string itself is too thin. The blower was underpowered
when trying to blow leaves off of our turf, and for sure this battery charger is way underpowered.
Over four hours to charge a two amp hour battery is inexcusable. Now they make a larger battery
charger. In my opinion, I think they should do away or discontinue this one that only brings
them discredit and only ship the larger battery charger. Next would be the overall build quality.
The tools feel kind of cheap in the hand. They're unfinished. I don't like the stickers. They look
like they're going to fade. This handle here, if you adjust it back, just rips up this sticker that
was poorly placed. I don't feel I could recommend these for their build quality. The manual said
that the line feeder here was automatic. That is not true. I could not get it to automatically
lengthen the line. You have to go in by hand, press this little button to release a little
quarter inch of it at a time. While I thought the telescoping tube was a nice addition,
the fact that after only a couple minutes of use, this piece here came loose and the whole thing
started opening and closing at will is a design flaw. Overall, I thought the manuals were poorly
written. They had a lot of grammatical errors, and there was no mention made on how to get the
line to come out. I just had to figure it out. And lastly would be the battery life indicator on
these batteries. While I love that they come with that, in any amount of low light you cannot
distinguish how many of the bars are showing because one light will light up the entire set
of four bars. So if you found this video helpful, will you please give it a thumbs up? It really
helps the algorithms to start suggesting it to more viewers like you. Also, please consider
subscribing. I'm working really hard to put out good quality content. There's a lot more videos
to come and unbiased tool reviews, and it's free. All you have to do is log into YouTube or Rumble
and click subscribe or follow, and it really helps the channel. Now I'd like to thank Wild
Badger for sending me out these two tools for my independent review. I think it takes a lot of
courage to send out a tool with no pre-arranged agreements on what I'm going to say, and I respect
them for doing that. I'm going to leave a link to these tools in the description below. Full
disclosure, those will be Amazon affiliate links, and if you click on them and end up making a
purchase, it won't cost you a thing, but I do get a small reward at the end of the month. It helps to
justify all the time it takes to do these tool review videos. If you don't want to use Amazon,
these tools are also on Lowes.com website, so you can check them out there. Until next time,
thank you for watching.