Hi, I'm Mike with House on the Mend, and in this video we're going to be reviewing the
Amore Cordless Tire Inflator. So let's get started.
Now I'm not paid nor sponsored by Amore. They simply reached out and sent me this unit for
free for my independent review. So this video is going to consist of next unboxing it, initial
setup, looking over the components, charging the unit, then we're going to put it to some
rigorous testing. So please stay tuned or skip to that section. It's the most important. And
finally, I'll give you my pros and cons. So here we go. All right, here's everything that comes in
the very decent packaging. You have the unit itself with a nice big display screen and big
buttons. So if it's cold outside and you have gloves on, you should still be able to work it.
I like that. If the battery runs low, you have this car charger adapter that can plug into the
bottom. This is the charging cable. This charges via USB-C, which I like. This is the main hose
right here that screws into the top. And this little nozzle here rotates and can screw right
onto your tire or the accessories that come with it. If you want a little tiny bit more hose and
you prefer this more standard kind of bike pump, vehicle tire clasp, you can use this one. But it
screws in to this hose, not up top. It also comes with a bag that has the Amoret logo on it. Lastly,
we have a very poorly written instruction manual, starting with the fact that they even misspelled
instruction right on the front. It also has tons of grammatical errors and wasn't proofread at all.
Look at this first precaution. This machine is not suitable for inflating tires of large and super
heavy vehicles, such as large trucks and large trucks. And it just goes on from there. Just
poorly written, poorly edited, obviously put into Google Translate or something to get it into
English from Chinese. Let's get a weight on the unit. It's pretty stout. One pound, seven ounces.
So before we go over the many nice features on this unit, the manual says to charge it first.
So this unit can handle up to a 10 watt charger, which is kind of a shame. I wish you could get
something bigger like this 45 watt charger, but 10 watt is a pretty standard household
charger. So let's go ahead and plug it in. Right down at the bottom here is the electrical port.
On the left is the USB port. This unit, once fully charged, can be a power supply so you can
charge your electronic devices. It's only five watts, so that's not going to be a big charging
capability, but nonetheless, it's there. This one right here in the middle is the USB-C that
we will be using to charge it. And the cigarette lighter adapter goes into the one on the right.
So I'm interested to see how long it takes to charge. So let's plug the unit in, start our
timer. As you can see here from the factory, it's coming with two bars, so it is 65 percent or so
charged already from the factory. Let's get a temperature baseline reading and see if it heats
up at all during the charging process. 81 degrees. All right, where were we? I hardly remember because
it took an hour and 24 minutes to charge a battery that was already two-thirds full. Let's check the
temperature. It went up just a few degrees Fahrenheit. Nothing bad. But they are pretty
honest in the manual where they say charging time is between four to six hours. That sounds about
right. So let's go over some of the features. First, let's install the hose. There's a threaded
port right up on the top here where we will just screw in the hose. Feels good and tight.
So let's turn it on. Long hold of the power button turns it on. Now it comes from the factory set to
PSI, which is good. That's what we use here in America. But you also have the capability of bar,
kilopascals, and kilograms per centimeter squared. And you can change those with this button down
here. It would be a long hold to switch and we'll leave that at PSI. Now this same button with a
quick press will change the mode you're in. So we went from car to bicycle to motorcycle
to basketball or soccer ball. And the cool thing about each of these settings is
car is automatically set to 36 PSI. And then you can adjust that by each push of the button
is a one half PSI. It blinks for a bit and then we'll stay on that. Let's check and see if it
remembers our last setting. If you go down to bicycle, it's preset at 45 PSI. Motorcycle is 32
and ball is nine. Now this setting here where there is no icon has a large parameter that you
can set from three to 150 PSI. So every other mode has a range. For example, the car mode has
a range from 26 to 50 PSI. The bicycle mode has a range from 30 to 65 PSI. Motorcycle has a range
from 26 to 45 PSI. And the ball setting has a range of 4 to 16 PSI. Well what happens if like
me you have a van where the tire pressure needed in the back is higher than the standard range of
50 PSI for the car setting? Well in that case you can go to this setting where you have
that three to 150 PSI capability and you can program in whatever setting you want if it's
outside of the normal ranges. So that's a pretty neat function. So we've gone over four of the
buttons so far. We haven't yet touched on this one which is the light setting. You can see it's
got a sunburst on it. So there are three settings. There's a flashlight and then blinking red lights
for safety. So let's turn off the light that I have in my box here and let's turn on the flashlight.
So that is not a strong beam of light and it doesn't it's not affected by any of the buttons
to adjust the brightness. But it is just enough light to get to the tire stem, connect it. Now
if you press the button again it turns to a slow flashing red. Once more is a fast flashing red.
So you could set those out to blink for safety purposes if you wanted.
It's another added feature. All right light's back on. Let's listen to the motor. Watch this
when we click over to the car again. Notice that it did not remember our previous setting of 35 PSI.
It switched back to 36. Let's try it again. So every time it goes back to its standard
mode whether or not you make changes to it. Let's listen to what it sounds like.
Fairly loud to my ears. It's about standard to the other tire inflators that I have. We
are in a closed box here so that might add to it. But it sounds very standard. So next let's
look at some of the accessories that you can put on the hose. Down here there's a little rubber
compartment and inside there are several accessories. They're not that easy to get out
and they're kind of clipped in. So you really do have to get in there with something and
pry them out. It took me so long to get this one out that the
power actually timed out. All right let's go over what we have. So these two are connections that
will go onto the tube and with these you can focus air into inflatable pull toys and
and that sort of thing. Maybe air mattresses with small port openings. This one here
everyone should recognize this is your standard basketball, soccer ball, football inflator
needle here. Very standard. This one is how you neck down to bicycles that have
a different type of valve. I think it's like the straighter valve. Now this one
this is to screw into the hose port and it becomes an emergency window breaker.
So you would take the hose off, screw this in, and this is supposed to be an emergency window
break if you're stuck in your vehicle. Now this seems quite gimmicky to me. First of all it's
very hard to remove from this port but let's say you crash into a river or body of water.
You're sinking and you need to smack the window out so you can extricate yourself. By the time
you find wherever you've put this is, if it's not right in your glove box or right in your center
console, and then you open it up and you pull that one tool out and you screw that tool in and then
you grab and start trying to get yourself out the window. I think you will have wasted quite a bit
of time and therefore I don't think this is a serious item unless you're going to leave it
always installed on there. I just think this is one more thing that they could claim this tool
can do and thus it seems to be a gimmick to me. Nonetheless we've got a full charge. Let's put
the hose back on take it outside and put it through its paces. What we're looking at here is
the back tire to my daughter's 2006 Land Rover LR3 that we are refurbishing. Instead of
looking on the tire itself for the proper inflation you want to instead go to the driver's
door open it up and look for this type of sticker right here. As you can see for this car
the front pressure is 33 psi and the rear tires should be 42 psi. Let's hook up our unit. We're
we go to the vehicle we can then go up to 42 psi. It'll set that then we just press the button
and I really like how once it reached 42 it kept going for a bit so that when it stopped
the pressure didn't lower in the hose. Now all we have to do is just untwist it as fast as we can
boom that wasn't much air escape at all. All right all right I love this bike stand for
working on our bikes. Let's go ahead and check the tire pressure on this one. So just like
on a car tire you screw on the hose long hold to start it. Let's switch over to bicycle
and it goes to 45 pounds as its standard or default and we're at 21 so let's get up there.
That seems good enough to me. These feel really firm. So if your bicycle tire has a small presta
valve like you see here the first thing you would do is grip that little knurled piece and unscrew
it counterclockwise to loosen the valve. Then you would attach the supplied adapter then thread on
the hose as normal and inflate to your desired psi. Well as you might be able to tell from my
shirt we're getting ready for our American Independence Day celebration the 4th of July
and we're going to have company over so I want to fill up a couple balls here. We've got
a basketball that's a little squishy and the same with this soccer ball. So if you look right where
the nozzle goes in right around that area will be what you want to inflate the ball to. So this
basketball wants to be seven to nine pounds and this soccer ball wants to be four to six pounds.
So let's go into our little accessory kit here on the bottom. We'll pull out the needle.
We'll thread the needle right into the hose and then it says to moisten the tip. So you can just
put that right in your mouth and lick it if you want or if you have chapstick handy you can just
moisten that tip just a little bit and that helps you not to damage this little port. We'll slide
that right in there turn on our unit and it's reading nothing. Let's go down to the ball setting
and remember it goes naturally or defaults to nine psi so let's go to six and there is
obviously a lot less volume in a soccer ball so that went really quick. And then let's do the
same for our basketball except we're going to set that up to nine. Pretty easy. Well the included tip
just broke on the fourth ball but once I put in a quality needle I was able to fill every ball you
see in this bin without even dropping the battery one bar. So if we look at my Ram ProMaster van
here we'll see the tire pressure for the front is 65 and the rear is 80 and so this is a perfect
example of when we're going to need to use that other mode where we can set our own parameters
higher than the standard vehicle mode. All right let's turn it on and we're supposed to be at 65
because it's the summer months we're actually sitting at 69 so that's interesting. Let's see
if we can deflate it. I like how it gets going faster. Let's see what happens. Nope nothing.
So we're out here volunteering at our daughter's softball firework stand and here's the trailer
we transported in so take this opportunity to check all the tires. If you look on what would
be the driver's side you'll find the sticker just like in the driver's door and as you can see here
50 psi and it's really bright out here but as you can see we're only at 25 on this tire so
I've got it set to 50. Let's see how long that takes. I'm going to set my stopwatch.
All right we are eight minutes in to 38. Okay about 14 minutes for that one that was at 25 psi.
This second one was only 19. So after just under 15 minutes this one quit and
it won't power up. I think it might have overheated. Let's look 116 degrees so
that's more than the ambient temperature by about 10 degrees or 20 degrees or so.
Let's look at the hose that usually gets really hot and about the same. So it turns out it did
not overheat it just completely depleted the remaining two-thirds of the battery to inflate
one tire that was down to 19 psi. So to give it the benefit of the doubt I want to try another
scenario with this Toyota Tacoma. This is a mid-sized pickup truck here in America and it's
riding on the very popular BF Goodrich KO2s. So we're going to simulate that we've been off-roading
with this vehicle that is four-wheel drive and has based on its clearance some capabilities
in that respect. So if you're going on sand snow or kind of rocky area this isn't a rock collar but
kind of rocky area you want to air down your tires to give them a wider footprint and more grip.
So I've done that very modestly here for our scenario. I've aired them down to 20 psi from
their preferred 35. So with a full charge let's pretend we just got through off-roading and we
want to air our tires back up before driving home at highway speeds. Now it is 97 degrees
Fahrenheit in Las Vegas right now. I'm going to put this guy in the shade. Let's set our timer and
see how long it takes. All right 9 minutes 25 seconds to get us up to 35 psi and we did not
drop at all on the battery and take a reading 121 degrees. So we are what is that like 25 degrees
above ambient temperature right about the same time and still no indicator that we've dropped
any on the battery level. We have jumped up to about 145 degrees though we're getting to
oven met territory. 7 minutes 35 seconds we've now dropped one bar so according to the battery
level indicator we have roughly about two-thirds of the battery left. Let's get a temperature reading
uh remaining consistent 143. All right by the fourth tire it has shut itself off
and sounds like it's leaking. It is also so hot that I need to use an oven mitt just to carry it.
And let's see how we did. That's lower than when we started because it started leaking out of the
hose. That's not good. All right if we plug it into the cigarette lighter adapter even when it's
completely depleted it will turn on and the cord is plenty long enough to get even to the back tire
of our truck. Well after testing this unit for several days I feel confident that I can give you
the pros and cons. So let's start with the pros. This unit is small compact and lightweight. I love
the large screen and the large buttons. I like that it has a flashlight just in case something
happens at night and you gotta head out to inflate a tire. I love that it's charged by USB-C. That is
great. I really like the main hose and the five different preset modes. I think this unit would
be ideal for a vehicle that needs to partially inflate one or two tires or a low PSI vehicle
such as a UTV. This could easily handle all four tires. With that being said let's go over the cons.
First the overall build quality is substandard. The body itself scratches very easily as well as the
glass or plastic screen. I never once operated this machine with it on the screen but nonetheless
as you can see here it got all scratched up just from transporting it back and forth over the
course of a couple days. As you saw the needle for inflating balls was very substandard. In fact I
have never had a needle break after being inserted into only three or four balls. So that is among
the cheapest quality I've ever seen in an accessory. Next would be the battery life. So I think that
the minimum on-board battery capacity should be enough to mildly inflate four tires and as you
saw over the course of two separate tests this unit cannot handle that. The sticker on the back
of the unit as well as the manual both say you need to charge this unit at least every month
to maintain the batteries that are in it and that's a lot of work for something that you
want to stow in your vehicle or in my case my wife or daughter's vehicle. In fact I wouldn't go
anywhere with this unit without the supplied cigarette lighter adapter because once it goes
down one bar there's no telling how fast it's going to be completely depleted and cut out on
you which happened to me twice. Next would be on multiple occasions after inflating no more than
two tires I found this unit to be so hot that I couldn't comfortably pick it up and carry it away.
So I think it should have a rubberized finish to it such as this unit here that would help your
hands from getting burned by this unit. While I'm very happy that it came with this little accessory
door down here I did find it very difficult to open. It took multiple attempts to get this little
rubber piece to let go and open up. I think there should be a tab of some sort installed on it for
easier opening. Speaking of accessories I didn't even attempt to inflate any pool toys or air
mattresses because the air coming out of this hose would take forever and as we've clearly seen the
battery life probably wouldn't last. If you're looking for an inflator for those sorts of items
I would recommend something like one of these two units here that is high airflow but low psi.
You're going to get a much more satisfying inflation out of these and they have these long
necks on them that you can stick into the port of a small inflatable toy or you can remove
these and inflate larger air mattresses without having to hold the small little nozzles that come
with this unit the entire time. Now I would have three bits of feedback for Amore. First would be
that the shell needs to be rubberized or converted over to plastic so it doesn't overheat
and burn someone's skin. Next I would get rid of these unnecessary parts. This gimmicky little
window brake and this extra hose that has to be attached to this hose is unnecessary. Instead
what I would do is take that money and put it into a better needle and a better screen that
or at least add a couple screen protectors like you get with a cell phone so that when you're
storing this unit in its bag it doesn't get all scratched up. So if you found this video helpful
will you please give it a thumbs up. It really helps the algorithms to start suggesting it to
more viewers like you. Sharing also really helps so if you know anyone else in your off-roading
community or your preparedness community please share this video with them. It's really easy you
just hit the little arrow button down at the bottom and send it to whomever you want or post
it on any of your social medias to get the word out about the quality and concerns over this product.
Also please consider subscribing. I'm working really hard to put out good quality content. I
have a lot more tool review videos to go as well as we're in the middle of a van build series that
I think you might enjoy. It's really easy and free. You just click on subscribe or if you
watch me on rumble on follow it really helps the channel. I'm gonna leave a link to this unit in
the description below. Full disclosure that will be an amazon affiliate link so if you click on it
it won't cost you a thing but I do get a small reward at the end of the month. It helps to
justify all the time it takes to set up multi-camera angles and get the proper lighting to make these
videos. Now I'd like to thank Amore for having the courage to send me out a unit for my independent
review with no preconceived agreements on what I was going to say. I think it takes a lot of
courage for a company to do that and some companies in my experience aren't willing to do that. They
want to watch the video ahead of time and give feedback and I refuse to make those videos. So
we should congratulate Amore for having the courage to put out this product for public review
and hopefully they take some of my minor suggestions and make an improved product.
Until next time, thank you for watching.