Hi, I'm Mike with House on the Mend, and in this video we are going to be converting this
oversized shipping pallet into this beautiful single-bedroom goat house with two single-hung
shed windows, double doors, and a private entrance in the back. Fit for a diva. So let's get started.
Now, a few things before I get started on exactly how I made this goat house. Number one,
the dimensions, because you might be curious, are about seven feet wide, four feet deep,
and it's got a sloped roof, but it's just about four feet high on average. Next, the materials.
So the two windows I got off of Amazon, and there'll be a link below in the description.
Everything else, including the metal roof, I got at my local hardware store right off the shelf,
and in our case that is Home Depot. Then I wanted to talk about the audio. In some sections it was
really windy and cold. In fact, it's snowing right now. So I put a filter over the top of the audio
to try to attenuate some of that wind, and it's going to sound a little tingy at times, but trust
it's way better than the very distracting wind. So I've been asking at the end of all my videos,
if you like it and you find it helpful, will you please give it a thumbs up? So I thought I might
do it real quick here in the beginning to ask for that. It's really helpful to the channel. All
right, let's get started. Hard to believe, but the entirety of this swing set was, of course,
completely disassembled and in this crate that we're going to turn into our goat house. So here
are the two new members of our family. We got them in the next town over a couple days ago.
We've put up this area of fencing for them to keep our dogs and any predators out as well as
keep them in because we have some landscaping in the backyard that we don't want completely eaten.
So here is our construction site. What a perfect reuse for this crate. The first thing I did
was start adding pressure treated two-by-sixes underneath so that it's always resting on
pressure treated lumber. Next thing I did is checked it for square and it was off by about
an inch. So I put this strap on to get it all squared up, added some screws to a few boards
that were just nailed in and had popped up, and now I am working on insulating underneath.
So this is a three and a half inches of gap here that I've started by putting some remnants
of reflective insulation that I have from projects in the basement. Then I'm going to take
a sheet of two inch to fill the rest of the gap and that is going to go from here to right here
where we have a forklift skid. Right in here past this forklift skid to the other side and that way
we can have as much insulation as possible underneath. But when it's time to move it and
set it down off the sawhorses in place we'll still be able to do that. Next thing I'm going to do
is take three-quarter inch insulation and I'm going to run that across here to fill the voids
from the boards. Then we're going to sheathe the entire floor and start building up from there.
So after the flooring was in I started bracing the top and then I started adding these furring
strips so that I could put in the interior walls. I left an opening in the back here.
That's where the goats are going to come in and out of that little square area there
in the fencing. I raised up 10 inches so that we can get a sloped roof and let's come around here.
I'll explain what you're looking at here. We have two shed windows very similar to the windows you
see over there on the chicken coop that are going to go right into those two framed spots. I'll cut
out the plywood pretty soon so we're all reinforced ready to go. The next thing I want to do
is insulate all four sides and then we're going to put our T111 on and really get this thing
nice and square and tight and sturdy. So since the front of the goat house was already 43 inches high
I designed the peak up there to be 10 inches higher at 53 so that I could make one cut
on this eight foot panel and get the 43 and the 53 inch piece. And through the magic of video
editing all four sides have been clad in the T111. You can see I cut out for the windows
and the front door and I also cut out for the entrance in the back. So the next step
is to run two by fours up here for the rafters that we'll attach the metal roof with.
So I've got all the rafters and the blocking installed for the eventual metal roof
that's sitting in the van getting ready to be put on after we paint everything. So
I'm going to now transition over to putting trim around the bottoms, the corners, the windows, the
doors so that it all looks nice and pretty and then we'll paint it. I've got most of the trim
work done. I put a cute little x-brace kind of barn design on the sides. If we move around here
to the front you can see I have the sides and the doorway and the windows all trimmed out but
I'm going to be spraying the paint on so I don't want to pre-install the windows and then I have
to cover them up with plastic and run the risk of the paint getting through and and ruining the
glass. So instead I made this trim removable for now so I can set this whole piece on a sawhorse
and paint it then I can paint this as it stands install the glass and then put the trim on
and I can paint everything still all at the same time.
Well we had an overnight snow storm but before that it was a beautiful day yesterday and I got
the courthouse all painted, the doors and the trim as well. So I'm gonna brush out all the
snow to get it off the flooring then I'm gonna insulate and put in the tongue and groove
right up here to really dress it up. Just putting the finishing touches on the tongue and groove
ceiling. So while the front door and windows will be closed this door here that the goats are going
to access is going to be perpetually open so I didn't want them to suffer when on windy days
and therefore I'm putting in this pony wall as a windbreak. So let's cover it with some more
tongue and groove and then eventually the wind would have to come in turn and go all the way
over there to affect the goats. So I got these shed windows off of Amazon. I'll leave a link for them
and they look really cute. They have a little screen and they lift up. You should reinforce
that screening material if you have chickens or other animals that predators could injure
but I think those are going to turn out really nice. So I'm right in the middle of cutting this
chicken wire to secure underneath the goat house so it comes out to about here and then I can cover
it with this same river rock and that way when the wind blows it won't lift up the house. It'll be
just held down. I did the same thing over here for the chicken coops.
Also the fencing coming out this way is to keep predators out and both things have happened
perfectly. When the wind blows this doesn't become a sail. We haven't had any predators come in.
Only problem I'm having is it is 20 degrees out. I've got a fresh battery from in the house
and my stapler is frozen. Have you ever heard of that? What do you think? You like it?
So I'm taking the extra step of installing some drip cap and since we're sloping this way you can
see I cut in a corner that's overlapped here overlapping this piece that comes down here
and overlaps the piece in the front so all the water and moisture is shedding downward.
Look at this winter storm coming in. It's so low it looks like the apocalypse.
Now the roof only needed two eight foot sheets and I cut them to size and then overlapped the
remaining pieces over here. I cut them with this kind of nibbler attachment to my multi-tool. It
works great for going up and down over the ridges and there we go a very functional awesome
goat house. Now one last thing. Cleanup couldn't be simpler thanks to these two opening doors.
All I do is take out the bed then I rake out all the existing straw and poop put it in the
compost pile and refresh it with brand new materials. After temporarily blocking the
entrance of course. Sorry girls. So if you found this video helpful you please give it a thumbs up.
It's really helpful to the channel. Also please consider subscribing. I work really hard to get
good camera angles, good lighting, good sound, everything I can to make good quality videos and
it's very helpful to the channel. Now I'm going to leave a link for the two windows. Full disclosure
that will be an Amazon affiliate link so if you click on it and end up making a purchase of any
kind it won't cost you a thing but I do get a small reward at the end of the month. Until next
time, thank you for watching. The small town strut is to walk down the street with your goat.
Oh, don't even think about those flowers.