Greenworks 24V Underhood Light

Waffle Square
9 followers
In this video I unbox, test, and review the Greenworks 24 volt Underhood Light.
Amazon Affiliate Link:
Greenworks 24 volt Underhood Light: https://amzn.to/3HwZQf4
Camera Gear Used:
Canon EOS R6: https://amzn.to/3NfUvwk
Canon RF 15-35 2.8 L: https://amzn.to/3RWE5rI
Canon EOS R (B Cam): https://amzn.to/3B4ogsw
Canon RF 35 1.8: https://amzn.to/421P6gI
Canon EOS RP (Overhead Cam): https://amzn.to/41CBecS
Canon RF 24 1.8: https://amzn.to/3oOtLJ6
Rode Wireless Go: https://amzn.to/3evlvcf
Video Chapters:
0:00 - Intro
1:00 - Unboxing
4:32 - Charging the Battery
6:05 - Testing
12:51 - Pros & Cons
15:41 - Conclusion
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
Email: [email protected]
#greenworks #shoplight
Hi, I'm Mike.
Welcome to my Waffle Square,
where I obsess about things
and you get to benefit from it.
Well, in this video,
we are going to test and review
the Greenworks 24 Volt Underhood Light.
Now, I'm neither paid nor sponsored by Greenworks.
I purchased this unit right here with my own money.
Now, full disclosure,
about a year and a half ago
on my home improvement channel,
Greenworks did reach out,
send me a set of hedge trimmers
for my independent review for free.
So, let's unbox it and see what comes in the package.
All right, here's everything that comes in the package.
We have the unit itself, three manuals.
We have one two amp hour battery
and the included charger.
So, the first thing I notice when I pick up the unit
is that the build quality is really nice.
There's no real sharp unfinished edges.
Everything seems to have been ground down
where the two sections of injection molded plastic
come together.
There's some rubberized feet,
nice smooth rubberized finish on the grip handles.
The power button is very tactile.
You can hear the click to it.
Second thing I noticed about the unit
is watch when I try to open it up.
You have to really force it open
to the point where you think you're going to break it.
And that's due to this metal clip right here
and this little raindrop shaped piece of plastic
that come together and hold the unit together.
So, at first I had to look in the manual
just to see how to open it
because I thought I was going to break it.
But once you figure that out
and you're not afraid of it anymore,
you won't be worried about opening and closing it.
Each side of the light has a really nice finished hook
that goes around the hood or whatever else it can reach.
That pivots all the way around 360
and holds itself right there.
So, it's not going to be put into a position
and then by its own weight kind of spin.
And it has a semi-locking section on both sides.
It also extends quite a bit.
We'll do some measurements to see how much that is
but it's got a nice spring tension.
Feels like it'll hold really well.
The cover for the LED is completely clear.
There are some out there
that have more of a soft box finish to them
to kind of flatten the light out or smooth the light out.
This is a straight view through to the LEDs themselves.
Now, the battery is a two amp hour battery.
That is a pretty decent size.
And I love that it comes with a battery life indicator
right on the battery.
Now, surprisingly when I press this one,
as you can see, it comes straight from the factory
and in our case with no charge whatsoever.
So, I'll be interested to see
how fast this charger can handle it.
One thing I am impressed about it
is that it's a 48 watt charger.
So, that is a pretty decent size amount of output.
And when I look on the charger and on the light itself,
I see four slats here on both.
That means that there is a good amount of information
being shared between the charger and the light,
probably for heat and that sort of thing.
So, I liked seeing that.
That means there's some information
being shared back and forth
and that leads to battery longevity
when you have more smart technology in the devices.
To close the unit back up,
you simply break it at this little center point
and it clicks back into place for easy storage.
Let's take the battery and the charger inside
and test how long it takes to charge
from completely depleted in this case
and whether or not that raises the temperature
of the battery in any alarming way.
All right, let's plug our charger into the battery,
start our timer.
You can see we are getting a blinking green light.
That means that it is in the process of charging.
If we were getting a solid green light,
that would indicate that the charging is complete.
A flashing red light means that there is an issue
with the battery and a solid red light
means that it is at a temperature too high to charge.
Base reading is 83 degrees Fahrenheit.
Wow, 46 minutes to go from fully depleted
to completely charged.
That is really impressive.
Way better than this 12 watt charger
that came with the hedge trimmers I originally reviewed.
Here was my thoughts on how long this took.
Wow, four hours and 17 minutes to charge a two amp battery.
That is pathetic.
Possibly the only thing worse I've ever seen
is this little tiny charger by Ryobi
that slips over the stem on their battery.
This is not a serious charger,
but I have to say like this isn't either.
Good news is it charges so stinking slow
that the battery is actually a degree cooler.
When it was done.
And with that much speed, let's see.
We raised what, a few degrees, 86 degrees now, nothing much.
Well, now that we have our fully charged battery,
we can finally get under the hood and test this light.
So to put the battery on, this couldn't be simpler.
Slide it on the rails, clicks into place.
To remove it, press the white button on the battery itself
and it slides right off.
All right, we come right up here
and with these soft hooks, just hook right around,
stretch it over here to the other side of the hood.
We're good to go.
The on and off switch is right here in front of me
since we went in this direction.
One push is the highest setting.
Another click gets us to the medium
and a third for the low setting, one more for off.
Let's try the highest setting
just to see what it looks like.
Now, if I was working here
with the light coming right at me, it is distracting.
Thankfully, I have my hat.
The nice thing about this light unit
is because we can pivot those hooks,
we can simply grab it and just start turning it
to wherever we're working.
So this is casting light all the way around here.
If I wanted to get down a little bit more,
say we were working on the back area,
flushing out the heater core or something,
I could turn it more that way.
And it is a good amount of light.
Now, I had been using a light that had little hooks on it
and I was having to take this piece of parachute cord,
click it onto the locks for the hood
and then hang it from there, which worked good,
but the light was always way up here.
The thing I really like about this light
is it's so versatile.
We can get much lower down here if we want to.
And concentrate the light right in this area here
if we're changing spark plugs or igniter coils,
any of that sort of thing.
So it's really cool underneath the hood.
Now, I didn't get this impression from reading the manual,
but if you've had the light on for a few minutes,
at any setting, when you press the button, it turns off.
So you don't have to cycle through every one of them,
which is quite different
from this little magnetic light I have
that no matter how long it's been on,
you have to cycle through all the settings to turn it off.
So I like that feature.
Now, my regular viewers will know
that I'm about to do an entire video
where we're gonna remove the front seats
and completely redo the leather on them.
I'm just waiting for it to come in the mail.
So a great tool for getting some light in this dark vehicle
might be to set this guy up like that,
turn the light on,
and now I'm gonna have really good lighting in here
when it comes time to remove these seats.
And if I need to see down there a little bit better
with the doors open,
I should be able to get right over here
with the steering wheel.
Yeah, gets right in there.
Now, this probably goes without saying,
but the same can be said for the back seats here
where I can put that right into place,
even turn the light,
and now I've got a great view of the back of the seats
to get at those bolts and also the plugs for the wiring.
And if any of my Land Rover enthusiasts were curious,
if you're camping or overlanding,
you can put it on the top half of the trunk.
You just have to go diagonally across the door.
Now, here's an interesting little fact.
The light does not fit on our biggest vehicle,
but works great on our smallest vehicle, this Honda CRX.
In fact, to use it at all on this hood,
you would have to break it in the middle here enough
so it'll hang, but it hangs down so low
that it would be in your way trying to do anything.
Now, I'm currently doing a build series on this van.
I'll leave a link to the playlist right here,
and it's gonna have lighting throughout the ceiling
and underneath the shelving and things like that,
but during the process of wiring
and building all the cages and everything,
this would easily stretch across the 74-inch spread inside.
Just out of curiosity, I took a tape measure
and confirmed the range was from 56 to 80 inches.
Well, the manual says that the runtime for high
is four hours, medium is six,
and the low light setting is nine hours.
So let's put in a fresh battery,
turn it on, and start the timer.
So in my testing, the high mode lasted three hours
and 55 minutes, which I would call good
at their claim of four hours.
The middle mode, which is supposed to be six hours,
lasted so long I actually had to fold it up,
take it with me in the van to drive over
to my daughter's softball game to film it.
Ninth inning, bases loaded, two outs.
Yes, yes!
One RBI for the tie, and two for the win!
Yes!
Our senior, Jessie Farrell,
her last home game of her high school career.
Ha ha, coming in clutch.
Which is one of the most exciting endings
of a game I've ever filmed,
and that lasted five hours and 52 minutes
when I got out of the car to head over to the field,
so I would call that one good.
In fact, the only one that fell a little bit short
in my testing was the low setting,
supposed to be nine hours.
It lasted eight hours and 40 minutes.
Now that's still 96% of the claimed runtime,
and that was with my older battery.
This battery's a year and a half old,
so a 4% degradation in a year and a half is fine by me.
So I would call their claims of runtime to be spot on.
Now after that nearly nine hours of running overnight,
I took temperature readings on the battery,
on the light, and right above the battery here.
And both the battery and the light
were just a couple degrees above
the ambient temperature in our garage.
The only rise in temperature really
was right in this area, as you can see in this picture,
that was 92 degrees,
so that was probably a good seven degrees or so
above the ambient temperature,
but that's really not a lot for running full time
for almost nine hours.
Let's conclude with the pros and cons.
First, the pros.
The overall build quality of this unit was excellent.
I was really impressed by how well-made it is
compared to the hedge trimmers I reviewed a while back
that seemed a lot lighter weight of plastic
and had no rubber whatsoever.
This unit is really hardened and well-made
and I was very impressed with it.
Next would be the addition of the 48-watt charger,
which is such a game changer.
The fact that you can fully charge
a completely depleted battery in 45 minutes is fantastic
and I applaud Greenworks for switching to a better charger.
While we're on the subject of the battery,
the battery life on this unit is excellent.
And interestingly enough,
in the Waffle Square Universe timeline,
I'm actually recording this video
while we are doing the six-hour test
that is the video before this.
Truly, you have a dizzying intellect.
We'd like it going.
Next would be the fact there is no discernible flicker
on most of my cameras when I'm recording,
especially my primary camera and my iPhone.
Now, as you see, this little charger here
sets off several of my cameras
and has a discernible flicker,
so I can't even use it when I'm recording videos
and I love the fact that this one is tuned just right.
The only one camera that was slightly affected
is my B camera here, the EOS R,
which I simply switched the frame rate down to 160th
and no flicker.
Always a consideration when I'm recommending a tool
is the battery platform.
And as you can see in this picture,
Greenworks has tons of tools available
for their 24-volt platform.
Finally would be the versatility.
There's all sorts of other uses
besides just putting it under the hood to add lighting.
The next time I use my quick jacks
to lift up one of my vehicles to work on it,
I fully expect to be able to take this
and link it between the two sides of the quick jack
and get all kinds of lighting down underneath the vehicle.
You could also use it for making blanket forts,
for stuff outside if you're camping,
and maybe underneath a bunk bed
if you've got kids wanting to tell ghost stories
or something.
I mean, the possibilities are pretty limitless
when you need to hang it from something and I love that.
Now the cons, and really there's only one.
When you first pull the unit apart to set it up,
it is very difficult,
but I'm already seeing that it's becoming easier.
So I think with time and those parts wearing and relaxing,
that's just going to resolve itself.
So if you found this video helpful,
will you please give it a thumbs up?
It really helps the algorithms to start suggesting it
to more viewers like you.
Also, please consider subscribing.
We're right in the middle of a nice long series
where we are refurbishing this 2006 Land Rover LR3
and there's a lot more videos to come.
Now I'm gonna leave a link to this light
in the descriptions below.
Full disclosure, that'll be an Amazon affiliate link.
So if you click on it and end up making a purchase,
it won't cost you a thing,
but I do get a small reward at the end of the month.
It helps to justify all the time it takes the light
and record these videos.
Until next time, thank you for watching.
