In episode 16, we compare our existing bulbs with LED bulbs from AUXBEAM in our headlights, fog lamps, tail lights, license plate lights, and interior lights on our 2006 Land Rover LR3.
All right, I gotta have a quick look.
Original.
Wow, look at the difference.
Hi, I'm Mike.
Welcome to my Waffle Square,
where I obsess about things and you get to benefit from it.
So in episode 16 of our ongoing series
where we are refurbishing this 2006 Land Rover LR3
with the V8 petrol engine,
we are going to be comparing the old standard lights
with brand new LED lights provided by Oxbeam.
We are going to be doing side-by-side comparisons
of the headlamps, the fog lamps, the brake lights,
tail lights, and all of the interior lights.
So let's get started.
Obsession.
Brought to you by Waffle Square.
Now I'm not paid nor sponsored by Oxbeam.
They simply reached out to me,
said they loved what we were doing with our LR3 build
and invited me to go on their website,
which I found to be really easy to navigate.
I'll leave a link for it.
I put in the year, make, model of the vehicle.
It brought the entire list of all the bulbs
they had available for it.
And I picked the ones that I thought
would be the most interesting to our viewers.
And then free of charge, Oxbeam sent me those bulbs
for my independent review,
along with a really nice dry fit T-shirt
for Aspen and I to wear during the making of this video.
So let's head inside.
Let's unpackage all of the bulbs
and take a look at what they consist of.
Then we're gonna come out here.
I'm gonna show you how to replace every single bulb
that we are reviewing.
And we're gonna wait for nightfall
and do a side-by-side comparison.
And I know you're gonna love that.
So please stay tuned.
If you find this video helpful at any point,
please give it a thumbs up.
It really helps the channel.
Let's get started.
So after putting our LR3 into their website,
these were the light bulbs that I requested
and that Oxbeam sent for our review.
So we've got the headlamps.
We've got the fog lamps in the front.
These are gonna be amber.
Rear brake lights.
And then two different sizes of interior lights.
You've got these really tiny ones.
And then your more standard kind of barrel lights
that go in half twist or so and lock into place.
Now, these are for like dome, map, license plate,
glove box, and then these are apparently
up on top somewhere as well.
So we'll find out which ones go where.
Now these amber ones should look familiar
if you watched our episode where we changed out
our broken fog light housing.
So we're gonna see how these amber ones do.
They're supposed to be better
if you're driving through dusty areas
at not illuminating the dust as much,
but giving you that amber light
that helps you get through dusty roads.
All right, let us see what comes inside this big box.
Okay, pretty fancy packaging for these light bulbs.
Now you may think these are just what you see
on the surface here.
These cool looking like Black Panther figurines,
but it's not just this lamp.
It's also this whole setup.
So let's go over the components real quick.
Let's show you on the manual.
So you've got on the light bulb itself,
you have the heat sink,
and then there's an actual fan in here.
Can you see those blades moving?
So there's a cooling fan as well.
Over here, this is called the driver.
So this must be taking the electricity
that's coming into the headlamp
and converting it for the purposes of LED lighting.
Now, this fan might on the surface
make you kind of uncomfortable,
like, hey, is this thing gonna like overheat
and shut off when I'm driving down the highway?
Well, it's actually rated for minus 45 degrees Celsius
to 150 degrees Celsius,
which is minus 49 to 302 degrees Fahrenheit.
So I think it's gonna be able to handle
anything most people can put it through.
All right, we are looking at the backside
of our passenger headlight.
And in our previous video,
I polished both of the lenses
on the driver and passenger side lights.
So we already have them out and ready to go
to change out the headlamp.
Now, in that video, I went step-by-step on how to remove them
so I'm not gonna go too much into detail,
but basically, as a recap, you remove the grill.
Then there is this metal slot right here
that you pull up on.
So these holes release, same thing right over here.
And once you pull both of those tabs up
and get these circles right into place,
you can remove the light, pull it out towards you,
and then remove this big plug that works all of this stuff.
Now, you're gonna be tempted when you start this process
to go right for this big cap right here,
but that's actually the high beam.
That is not the one we're changing out.
As you can see in this picture,
it's a totally different setup in there with a big plug
and this whole circuit board underneath
this weather-sealed piece here goes to it.
So instead, let's reposition the camera over here
where we're gonna be working.
First thing we wanna do is twist off this cap here.
So you twist it to the left for lefty-loosey,
and it comes out.
There is an O-ring right here that I'm gonna lubricate
because you know, here in our desert climate,
we've had a lot of problems with O-rings
getting dried out and cracked.
Now, it looks pretty dark down there,
so I'm gonna remove this cap
and place one of my work lights in here.
And in the interest of being as detailed as possible,
I've taken the time to already go through this procedure
and document it with this macro lens
that has a light on the front.
So I can really get in there
and try to show you each step of this process.
So the first thing we wanna do is remove this plug,
and I've found that a pair of needle-nose pliers
does a great job of that.
Wiggle it back and forth, and that comes off.
And this is where the new light is gonna plug into
with this braided cable.
We'll set that out of the way for now.
So the existing bulb is held in under spring tension
by this existing wire.
We just wanna go in there with our needle-nose pliers,
release that like you see,
rotate it up and out of the way.
Then we'll just head in there with our needle-nose pliers
and remove that existing light bulb.
Now, it would be really difficult to set the lamp in here
with this big heat sink and fan on the back
and try to get that spring back into place.
So instead, it just twists off like this,
and we're gonna put that right in here.
You can see the groove just like that.
Then we rotate the spring clamp right back into place
and clamp it back into place with our needle-nose pliers.
The manual says that proper installation
is for this side and this side of the lamp
to be at three o'clock and nine o'clock.
Now, I've noticed that that's basically right
where this slides in.
So we're gonna have to turn it one way or the other,
unfortunately, but the manual does say,
as you can see here,
that zero to 5% rotation out of three and nine o'clock
is okay.
But before we put this into place,
we are going to be using these double-sided adhesive pads
that come with the kit right on the back here.
And then right over here on the side,
you can see in this picture is the spot I've selected
where we are going to affix the driver.
So to get good adhesion,
I'm gonna take some of this rubbing alcohol
and I snuck one of these makeup removal pads
out of the wife's drawer.
So let's wipe down the back of the driver
and we'll also wipe down that nice rectangular spot.
Good, now I'm gonna peel off one side
and stick it to the driver.
That'll make it easier later
as we're running out of space
with all this stuff being in here.
Okay, on the top and the bottom of the light
are two tabs and they correspond with the slot
right in that little piece that we just installed.
So I'm gonna insert that down into position
and with our lamp, it's kind of rubbing right against here,
but if you get this turned just a little bit,
you can get through this notch and it does go in,
boom, all the way.
And then I'm gonna turn it counterclockwise a bit
and that should lock it into place.
All right, I have fished out the plug
and as you can see, there is a white and red line here
for the positive and then the black for the negative.
There is also right on this plug, a plus and a minus.
So let's turn it just like that
so that our plus is with the plus side.
Put that right into place.
Now that is a good, strong connection there.
I think these little holes here
have corresponding tabs in there
because I can feel it and hear it click audibly,
which is pretty cool.
All right, so if this guy's gonna need to go in here,
I would think we can zip tie this guy
maybe just like this with the included zip tie.
Now I'm gonna peel off the other side of this backing,
slide it in here and seat it right against this wall,
just like that.
I really wish there was a slot or something in here
where we could have put another zip tie
through and across and clamped all this down.
That would have made me feel better,
but that's not the case, so that's all right.
We'll just fish that all back in there,
make sure nothing's getting into that little area
where the fan goes.
I think that looks good.
And then I'm gonna take off this O-ring
and go lubricate it and we'll put that back on.
It does seem remarkable how much bulk and complexity
is involved with this LED light
compared to the standard incandescent though.
It makes me really curious if the payoff is worth it.
So, you know, once I had the headlights
and the grill taken out, I had to go through
and wash and wipe everything down to make it clean again.
All right, in we go with the passenger side headlight.
I'm gonna click the plug into place
and then I'm gonna set it right in these two pegs
right here and on this side.
Easy once you got them lined up.
Push down, good.
Now I'm just gonna set the grill in temporarily
because a couple of our viewers were spot on
about who made this grill
and where I could get these broken retainer clips.
I ordered them from the UK and they're in the mail.
Next, let's change out the fog lamp to our LED amber lamp.
And there are three T15 screws holding it in place.
Quarter turn and it comes out
and we have this clip right here for the wiring
and out we come.
This slot in the wiring corresponds
with the plug in the lamp.
So there's only one way for it to go back in.
I hear that nice click, go.
Next, let's change out the brake lights
and we're gonna do it on the driver's side
instead of the passenger
so that when you're watching the comparisons,
it'll always be Oxbeam on your left
and the originals on your right.
So we've got a Phillips screw right here
and a Phillips head screw down here
and both of them look pretty worn out.
So you can tell people have been in here.
Now there are two metal pegs
that go into like rubber receivers right over here.
I'm gonna pry them back with a plastic pry tool
so we're not scratching the paint.
There's one and two.
That was easy.
All right, here are all the bulbs.
And there's a bunch.
So we're gonna change out these top two.
Quarter turn, out it comes.
Out with the old and in with the new.
Man, that is fancy looking.
Well, while we're back here working on the brake light,
let's also change the map light out.
So this little spot with the notch
is where you wanna get your tool in and pry down.
We're wanting to push it this way
to overcome a spring over here.
There we go, good.
Let's see what we got in here.
We gotta twist this guy right here.
There we go.
And that's one of the flat ones.
And here's the red wire coming in.
So I'm assuming that's gonna be the positive side.
There we go.
All right, right here we have our three overhead lights.
The center one corresponds with the doors as well.
So let's turn all three of those off so they don't get hot.
Now we should be able to reach towards the front
and just push back this way while pulling down.
Yep, comes right out.
All right, now we'll give a little twist there.
It's about a half twist.
And I can see already these are going to be
these push-in bulbs right here.
So we'll pull that one out and put this one in.
That is easy.
All right, I gotta have a quick look.
So original.
Wow, look at the difference.
It's like 5,000 to 6,000 Kelvin there, super warm there.
Ooh, I'm excited.
All right, same with the center one.
All right, and let's wait to do the third one
so that we can make this part of the comparison.
What a difference.
All right, let's get our bearings.
This is the back hatch.
And right inside the back trunk compartment
is this overhead light.
So it looks as though the bulb is over this side.
So whatever side the bulb is on,
you want to pry from the opposite side.
There we go.
Nice, okay.
This is also one of the flat ones.
Easy.
Now here's the very back sunroof.
That's forward.
Here's the side window.
And here's a little side light.
Comes out real easy.
Same thing, this is one of the flat ones.
These actually have a plus and a minus on them.
I've just been getting lucky this whole time.
All right, there we go.
Wow.
Right underneath the door,
where you see that light shining,
is another lamp for when you open the door to exit,
it lights your way where your feet are going.
So that's really cool.
Let's change that one out.
This one I can just get with my fingernail.
Easy.
Another flat one.
And right down below each of the front seats
is another light.
Here, can I just get it with my finger?
Nope.
There we go.
Nope, this one's not plugged in.
All right, let me see if I can find that plug.
So I'm getting ready to do the nighttime comparison,
and these lights aren't working.
Well, come to find out,
the ones I was sent are a single dot there at the bottom,
but the two main brake lights are double dots on the back.
So these aren't the right lights for that.
We're gonna have to switch over to backup light
and something down here and test those instead.
So I tried this light in the blinker,
and you can see it's blinking properly at the proper speed,
but if we go up, the car's not happy with it
because it's blinking at double speed,
which is basically like an error,
because the other side with the normal bulb doesn't do that.
All right, let's check the headlights.
Now, the lights on the website
said that the ones we changed were not the high beams,
but were the low beams, the normal beams.
But if you remember, we changed these.
So I was trusting Oxbeam's website, but I was wrong.
These are the normal headlights.
What they sent us were the high beams.
So let's do a comparison of those.
We'll go to high beam.
See the blue light come on.
And yeah, tremendous difference.
Very bright, white, beautiful light,
as opposed to the standard bulb,
which is very kind of golden warm colored
compared to the regular headlamp.
All right, one more we should check are the fog lights.
So you have to have the light turned on at least one click,
then you can pull out for fog lights.
And there's your standard light, nice, bright, and white.
And here is their amber light.
I hope that color shines through.
It is really pretty.
All right, well, sadly, the rear taillights are a total bust.
Those lamps don't work properly on anything,
but there is no denying that these interior lights
make a dramatic difference.
Look at that one compared to that one.
Up front, you've already seen,
but all the way back here,
you can tell the massive difference.
Let's look at the doors.
Look how bright white those are,
casting really nice light.
The light underneath where your feet go, bright and white,
as compared to over here on the passenger side
where we didn't change out the lights,
dull, kind of dark colored.
And you can barely even tell
that there's a light underneath the glove box there
because we didn't change it out.
So definitely the interior lights
are a total win.
Can you tell I'm disappointed?
So let's sum everything up.
The headlamps, they look good,
except they're not the headlamps, they're the high beams.
But when you go on the website,
they say they're the regular headlamps.
So we went through all that installation
for the high beams, which you don't use very often.
Now, when you need them, those look really bright white.
So I am gonna install the other one over here,
and I'm grateful to have them.
Fog lamps look really good.
They didn't seem to emit as much light
as the traditional one, but that's probably the point
when you're in foggy conditions or dusty conditions.
So I'm gonna keep them and probably convert the other one
because I think they look really nice.
Unfortunately, these brake lights, they don't work at all.
They're the wrong type of bulbs.
They are listed as being turn signal, brake light,
reverse light, tail light, interior light.
But I couldn't get them to work on anything
in the back of the vehicle.
So that's disappointing.
These little barrel lights
that are supposed to be for the interior,
I couldn't find a single spot inside the vehicle
that uses these.
So the website is inaccurate.
If you know where barrel type lights like these
go on the interior, please drop a comment below
and let me know how I'm wrong, but I couldn't find it.
I would definitely say the bright spot
in all of this review are these interior lights,
these little flat ones,
which I will leave a link in the description
for these and the other lights that actually worked.
These are outstanding.
Now, I used all but two that came in this 10-pack
for half of the interior.
So I'm gonna order another set
and convert the other side over.
They're that good.
Speaking of that good,
I wanna thank Oxbeam for reaching out
and sending me these lights.
I think the lights themselves are very high quality
and I am happy to have them in my vehicle.
I think the overarching problem in this review
is their website.
It is inaccurate.
So hopefully they can make some adjustments
or reach out to me and tell me how I was wrong
and I'll let you know about that in the next episode.
Speaking of the next episode,
I have had a company reach out to me
that has an OBD reader specifically for Land Rovers.
It is 60% less than the $500 GAP ID tool
that we've been using throughout this build series.
If it has the same functionality as the GAP ID tool
for only $200, I really want to tell you about it
and sing its praises.
But we're gonna find out if it's as good as they claim
in the next video.
Until then, thank you for watching.
So I wanted to give you an update on this grill
from episode 15, where we took it off
to polish both of the headlamps and restore them.
So in that episode, we found that up here,
the grill was actually broken away from this piece
and needs to be epoxied.
And that both of these lower mounting clips,
as you can see here, were broken.
And thanks to Tian and Johnny,
who both reached out in the comment section
and said that this grill looked like it came
from PowerfulUK.com.
I reached out to them and sure enough,
they were able to send me two pairs of replacement clips.
I wanted two pairs in case they break again,
I'll have them.
And it cost me 20 British pounds with shipping included.
So you can see right here that these are going
to be an exact match.
So thank you so much to Tian and Johnny
and everybody that comments on the videos.
It's very helpful.