Blue Force Gear: Plate Minus V4

Ballistic Lab
1 follower
1 Video View·Jan 5, 2026
Blue Force Gear: Plate Minus V4
Alright guys, continuing on with plate carrier week or month, however this pans out.
Looking at the Blue Force Gear plate-minus version 4.
Knowing what I know now, plate-minus version 2, plate-minus version 4,
it's as similar of a vest as you can get between different iterations.
So very minor differences, but we'll get this on the table and take a look at them
and you guys can kind of decide for yourself. Thanks.
Okay, so looking at the Blue Force Gear plate-minus version 4.
So version 1, version 3 are non-side plate compatible.
Version 2, version 4 are side plate compatible.
There are very, very few differences between the version 2 and the version 4.
Almost none of them really matter,
depending on your personal wants and desires.
And a little bit of aesthetic really is what comes into play.
So I don't know for sure.
This is a size medium. The last one I looked at was size small.
So one of the things that I noticed most that's functionally different
is the medium version 4 gets you an extra column of MOLLE or PALS webbing on the front plate bag.
I can't say with any certainty whether that's driven by it being a medium
or the change in style of laser cutting that Blue Force Gear used.
It may also be partly, maybe they wanted a more defined separation
between the side plate and the front plate bag.
I'm not sure, but you do have eight columns of MOLLE on the front plate bag.
So that does open up some possibilities.
If you're a one radio guy or gal, it gives you room for three mags and radio on the front plate bag.
Just like the old SKD pig plate carrier got you.
So that, in my opinion, is a little bit of a selling point.
However, that is at the cost of more standoff between your front plate and your side plate.
So you've got, you know, an inch and a half gap there.
Now, once it starts to wrap around your body, that closes up just a little bit.
But for those that do like the idea of trying to have continuous,
you know, armor, there is a little bit of a gap.
So it is a little bit of a trade off there.
The biggest change is the style of laser cutting.
And I'll bring the V2 back out just so you can see.
The original Blue Force Gear plate bags had this blocked out square cut MOLLE.
Which, there's nothing functionally wrong with that.
However, in my experience, this single slot when you're doing laser cut MOLLE
gives you more flexibility.
Because now there's no implied dead space for webbing to come back out of the vest
and weave through a pouch and then go back into the vest.
You can stagger pouches with more defined control.
And you can offset stuff, you know, one inch at a time if that's what you want.
You don't have to move it the whole two-inch spacing to drop a pouch or raise a pouch.
So you have a little bit more control there.
So, you know, if you were doing something like three magazine pouches up front and a radio,
you know, 152s and 148s are pretty tall radios.
You can drop that radio down just an inch if that's what works for you.
Or three inches if that's what works for you.
And then still have your magazines at a normal height.
So I do prefer this style of cutting compared to the old one.
What was interesting, in my opinion, is when it came to the cover bun flap on the old one,
it was essentially cut the same.
So it's not like Blue Force Gear over time realized that they could laser cut MOLLE in
this pattern.
They were doing it from the get-go.
It's just the whole thing is cut that way now.
Which is interesting.
I don't know.
I don't necessarily know why they went with the kind of square cuts there.
So some other key differences.
You get a full patch panel front and back on the version four.
The cover bun is functionally identical, if not completely identical.
And then we'll get this out of the way here.
You still have a full MOLLE face all the way down, even with your cover bun.
And then you do have that little flap at the bottom there to help police everything up.
So what I noticed as I was playing with the version two and now the version four on this
cover bun, I'm not a huge fan of it.
The cells provide some capability on the cover bun, but there's a pretty small likelihood
that they're going to be available to you.
And the reason I say that is if this thing fits in its kind of ideal configuration, which
is this flap, even with the plate bag, and then the front one, even with the side plate
bag, then you have two cells.
But that is the only sizing where that works.
If you need to take up slack, whether it be in the front or the back, you're losing part
of a cell.
So if you're not the ideal medium version four plate bag, you have a one cell cover
bun, which is interesting to me that it ended up being that all of the adjustment that you
can possibly do in here costs you cover bun cells.
Because they could have had a longer tail here so you could pay out more if needed.
The shoulder straps are configured essentially the same, the only difference being the molly
is now cut as the individual slots instead of blocked out.
So you definitely have more options on the shoulder strap for where you need to mount
things or can mount things or where you want to tie things off.
You additionally get a little bit more control with where you might want to clip in a push
to talk with this single slot cutting versus the block cutting where you can't use the
space where the block is cut out.
The side plate bags are configured essentially the same.
You still have the Velcro pass through at the top, you still have the pull tab on the
flap and on the cover bun.
And you can kind of see if we close up this front plate bag, what I'm saying there is
if you need to take out more slack one day, that still closes functionally fine but you
end up losing a cell there.
And it also costs you a lot of Velcro continuity so that's kind of the ideal spot there and
then you close over that.
As far as the plate bags go, I appreciate that they are cut long enough for eSappies
and backers.
The plate bags are very drama-free to close.
You can see there's a hardy patch of Velcro there that engages with a two-inch strip of
Velcro on the inside.
So if you were one of those folks that found the Unicorn medium-long sappy plates, you
still have plenty of room in the plate bag to actually mount those.
You could pay out a good bit of this flap if you wanted to.
And actually that would expose more of this horizontal row of MOLLE there.
So they did get rid of the kind of Tourniquet Now specific mounting pattern on here.
It's now just horizontal MOLLE.
I believe it still works with the Tourniquet Now if that's something that you want.
I don't have one on hand so I can't really verify that but I do believe you just need
the two webbing dog ears sticking out and that should work on there.
The plate pockets and the insides are still all tweave so your plates are easy to insert
and they're very forgiving plate pockets.
So if you ended up having a bigger plate than an eSappy or something like that, it should
work out just fine.
I don't know if you could truly size up to the next size plate but there's a lot of room
in there for variances and thickness and some of the measurements.
Some of the companies out there will mark it like a 10 by 12 and it actually ends up
being 10 and a half or 12 and a half or something like that.
So there's room there for that to work.
But outside of that, those thoughts and those comments, there's really nothing else to say
about the version 4 versus the version 2.
Throwing this on and moving around with it a little bit, if side plates are not your
jam, I would not recommend this setup.
If you do need side plates, it is a fairly streamlined setup.
You can essentially use it as a slick carrier if you need to.
Granted, you got side plates so how do you pitch that idea?
But it can be very slick or you have plenty of molly available for mounting things.
If you do need side plates, I don't know, it's still a little hit or miss to me.
I'm not super sold on this specific platform.
I think it gives up a lot of modern features that we've grown accustomed to and it doesn't
necessarily give you the savings on the tail end for not having those.
I think if you're buying these new, there's still a fairly significant amount of money.
But there you go.
Plate-minus version 2, plate-minus version 4.
If you were curious how they work, now you know and hopefully that answers some questions
for you guys.
