Grey Ghost Gear SMC Plate carrier - The Next Best Multi-Mission Plate Carrier

Ballistic Lab
1 follower
1 Video View·Jun 20, 2025
Today we bring you a new plate carrier review with the Grey Ghost Gear Laminate SMC plate carrier. Let me break it down for you!
| Get the gear in this Grey Ghost Gear SMC review |
Grey Ghost Gear
Laminate SMC
1 to 3 Assault Pack
Rear Panel and Pouches
Oh, hey everyone. I was just about to do a little bit of LARPing around in the backyard.
And I got the opportunity to play with an extremely versatile plate carrier,
so today I'll be bringing you a review of the Grey Ghost Gear SMC Laminate Plate Carrier.
You can also use the discount code TLDCO that I'll link down below also,
so you can save yourself a few bucks on Grey Ghost Gear if you're interested in purchasing
this carrier. But, so like we always do, let's look at the front, the back, the cummerbund,
the shoulders, and then put the plate carrier through a series of tests and let's see how it
does. All right, let's get started. All right, so let's go ahead and start on the corner of this
plate carrier. Is this pocket open over here? Yeah, it is. Okay, so that's so you can slide
in that little Velcro part when you go to adjust the shoulder, so that's pretty neat. They give
you room to adjust that. And look at the front here. They have both the loop and the molle. So
where does the molle start? Okay, so the molle is in the center section if you're wondering how
it's kind of set up, but then, yeah, not on the other panel. So it's just right here on the middle
there. Then it has the loop all the way, but yeah, nope, not on the top here. And then it has the
laser-cut molle down through the center. That's really nice. And then here on the bottom again,
we have the hook and, okay, so all of this is molle. So some of these aren't sewn down,
so they're all molle sections. So you can use either molle or the hook and loop. That's really
pretty awesome. All right, yeah, I'm a big fan of that because then you can use placards or any sort
of molle panel. That's awesome. And then look up here. This is where you can actually put in your
hooks if you want to hook in a placard. So they thought of a whole bunch of stuff here.
That's pretty awesome. So there's a ton of expandability here. All right, and then what's
here on the side? Okay, and then we have our tubes that are already integrated in. So we have that
QD that's already built into the actual plate carrier. Wow, this is a feature-rich front plate
carrier. Let's check the back. Okay, on the back here, there's, okay, it's looking like some really
nice pads here. They're kind of stiff though. Now this is a nice elastic material that actually
expands when you put the plate in. It has a mesh in the middle. All right, let's open this up.
It's a big compartment to connect in our plates. And then the Velcro is on the inside. So that
would mean you could connect in larger plates because then when you connect them, you would
actually have the extra room for the plate. See here. Now that we've seen all the features that
are on the front of the plate carrier, let's take a look at the back. All right, let's see if it's
as crazy as the front. Oh, it's got that cool little Velcro strap I love to tuck away this
pull handle away. So it's not all the time, just bouncing around. That's pretty awesome.
It looks like the whole backing is laser cut. Molly. I love seeing that it adds so many options.
And then of course we have the zipper here. That's awesome. I can tell you, this is a normal
cry configuration so you can fit in any issued panels. This is going to be awesome for expansion
and looks like this is where we adjust the cummerbund. Okay. So yeah, we undo these mallets
clips. We'll go through that in our tests and try that out now in the back here. Okay. It looks like
the same thing as the front. We got that nice padding it. I wish it was a little softer. We'll
see how that goes. And then we have that really nice mesh in the middle. Let's see how this fits
to see if it connects the same way. Yep. Same thing. So it connects on the inside. So that'll
allow you to fit in some of those longer plates, like we mentioned on the front panel. Now let me
show you these cool cummerbunds. All right. So take a look at this. It has the tubes built in
so you can QD. And then what's this? This is like a mesh pouch. Oh no. Okay. So it's got Molly on
both sides. And look at this. This actually fits a six by six side plate. So you can just put those
in. And then what is this Molly? Does this have a spacing in between? It does take a look at this.
So you can feed all of your Molly connections straight through these gaps here and it's on the
front. And I bet it's on the rear. It is. Wow. That's awesome. Okay. So that's going to make
connecting things so much easier. So let's use this tubes connection. See how easy it is. Okay.
Just slide these pieces. Wow. Oh, okay. That was easy. What about taking it apart? So we'll pull
down. Oh, okay. Well, that's easy. Okay. Let's just put this back together again, slide these
pieces in and then just, that's awesome. I love that. All right. And looking at the back,
as we showed, here's how the cummerbund adjusts with these malice clips.
It looks like we can feed these in and under if we need to, like if we need more expansion,
we can put them underneath on the sides of the plate carrier, like route it underneath there.
And then we can adjust it. So it has more room all the way around. So I'm betting if we put it
underneath this area, we could probably use the full area of the cummerbund. So we can actually
get it pretty tight. Ooh, now the maker break area, most plate carriers. Let's take a look
at the shoulders. All right. So look at this. It's got some nice padding on the shoulders already.
Wow. Okay. It's got that cutie on the shoulder pad too. Wow. That's awesome. Those tubes make
it so easy to just take it on and off. I hadn't really dealt with those before. So I'm really
impressed. And then we got padding on the shoulder pad already. Like there's no extra
pieces you need here, which is great. And then this is the Velcro that we use to adjust. Okay.
So that's easy enough. We'll see how that goes when we go to adjust it in that test.
And then on this side here, it looks like we have a different setup. It looks like a little,
just a buckle connection, but it has the same Velcro and the same padding underneath.
All right. Well, it looks pretty simple. And we have the other adjustment here. Like we showed
the beginning where we can adjust the length and size here. I think we can actually disconnect both
of these and then put in another one of those tube connectors. So let's do that real quick.
And then we have two QDs on there. How cool is that? Then we can just easily just take this off.
Yeah. I'm a big fan of these tubes. I'm going to need this on all my carriers now.
So I really do like those shoulder QDs. I'm a little concerned it could mess us up when I go
to test the cheek weld, but we'll see when we get there. Let's start our test though,
with the color tests showing you the different colors this plate carrier is available in.
The Grey Ghost Gear Laminate SMC is available in black, Coyote Brown, and Multicam. I love the
Multicam. Next, let's take a look at the plate installation test. For this test, we're going to
be using some Level 4 LA Police Gear plates. They're a little bit thicker, so it's good to
test the new style of plates that you may see, like from RMA or some other companies. All right.
Here we are. Let's go ahead and put in our LA Police Gear Level 4 plate. We're just going to
open up the panel like we showed earlier, and then we'll see if we can just go ahead and put this
plate right in here. It just should slide right in. Okay. Definitely a tight fit. I'm having to
put a good bit of strength behind this to get it to fit, and it doesn't seem like it wants to go.
The more I shove it. Yeah, I got about a quarter inch. It just won't go any further. It doesn't
go in the rest of the way. I think there's an issue where the sides just don't expand enough.
These plates are just too big and too thick on the sides. You see there's a little bit of extra
room. It doesn't quite fit. Just info you, those one inch thick or a little bit thicker plates
are going to have some issues in this carrier. Let's try out our HESCO 4401s though. They're a
little bit more standard size, so we probably won't have this problem, but they're also a lot
heavier. Let's give it a whirl. All right. Let's put these bricks inside here. Oh yeah, that just
slides in easy. Just push in there, tighten it up, and it goes all the way up to the top, and
it fits much more nicely. You can tell it was designed for this style of swimmer cut.
Then we can just peel over our flap, put it down, tighten in our plate into position,
and then it fits just perfectly. Yep. Absolutely no issue there. All right. Let's try on the back
now. We'll try again that LA police gear plate. It's probably not going to work, but let's give
it a whirl. And again, yeah, it's really tight here on the back. If you're looking at these
one-inch plates for this carrier, you're probably going to go for a thinner profile because it just
doesn't want to fit over those corners there. And you got about a quarter inch to half inch that
just kind of just doesn't want to go all the way in. It just doesn't fit quite right. Again, on the
back, we used the HESCO 4401s because they're a bit of a thinner profile, and same with the front
placard. We didn't have any issues in the back. So then putting these in here just like the front,
fit just fine, tightened it all up, had no problem. The plates were good to go. Now let's take a look
at the shoulder and the cummerbund adjustment. Let's look at the shoulder adjustment. There's
actually two places where you can adjust it at the top and the bottom of the buckle or the quick
release. All right. So let's adjust at the bottom point here. We got to take this Velcro. Okay. Stop.
Okay. It's connecting down with the, how do you get the Velcro out? Okay. The elastics in the way.
So I got to get the Velcro off, but the elastic doesn't move. So you got to, this is a pain. Okay.
All right. So there's plenty of adjustment once you get everything taken apart and then you can
fit it into a lot of different sizes. I bet you could just connect it over it without even using
it. No, we better do it the right way. We just got to kind of feed it in. Just don't push it down onto
the Velcro. Good gravy. Okay. So that's, that's a bit of a pain. Oh no, there's another one up here.
Okay. So we're going to take this out from here and then, and then we can just take it out from
underneath. Nope. Now it's, now it's pushed it back down again. Okay. Now we got to push this.
Oh my goodness. This, why doesn't this little piece move? All right. Just pull this whole
thing out of the way. Yeah. Now you, now you come here. Oh my goodness. Get off of there.
You are stuck. All right. This test. Okay. So once you have it undone, there's plenty of adjustment.
You can go to a lot of different places. You can make it larger if you needed to.
You can make it much shorter, whatever you needed. I'm going to reconnect this and we're
just going to, I'm going to not use any of those elastics and I'll just put it here and then we'll
just use this back one and look at that. It's perfect. All right. So that was a bit more of
a pain than I thought it would be. Let's try the cummerbund adjustment. All right. So to adjust the
rear cummerbund, just undo the malice clips. And when you do that, it unhooks from the cummerbund
flap. And as you can see here, you can pull out all the excess that I had here and you can see
different sections. So what I do is I take it kind of where I want to feed in the extra into
the actual plate carrier. So it's kind of hidden and you don't see it. Then you can have it all
lined up and then you'll feed your malice clips back in to reconnect everything up. It's a bit
tedious, but it's definitely not a difficult process. You just need to size it right and then
go through the process. And then once you feed it all through everything, it's nice and tight and
fits you very well. It's actually a pretty good design. I really do like how this works.
Next, let's do the adjustability test where we kind of see the range of adjustment
and what kind of body types it actually fits. As you can see, it fits me nice and comfy. I
like the way it sits on me where the back plate actually sits a little bit higher.
I like that. I find it to be extremely comfortable, if not one of the most comfortable plate carriers
I've had. There's also plenty of adjustment range in the shoulder pads and the cummerbund
to actually fit a woman's size frame too. So there's plenty of adjustment range here,
both for big and small frames. Next, let's do the plate care expandability test.
Okay. So for this, we have the hook and loop. We have the molly and we have a spot for the placards.
So we could use a standard, just magazine holder. If we wanted to use this gray ghost magazine
holder and just connect it with malice clips, or we could use like an S-TAC mag carrier and just
connect that with malice clips. And that would be an absolutely fantastic option. Or we can use
these clips. Watch what these can do. So we can hook these into the top of the plate carrier.
Just hook them in here. And then I think you hook them in the bottom here. Okay. Yeah. Slide this in
and then just hook this bottom piece over. Just get over there. There we go. And then I'll spare
you connecting the other one. And then there we go. Now we can hook up a front plate placard here
with our Spiritus MK4. Just connect the two buckles and then connect down the front flap.
And look at that. Now we have a whole front plate placard on here. Wow. Yeah. Lots of options on
this one. Now let's take a look at the back. We have the full molly panel and we also have
zippers. So because it doesn't use some obnoxious proprietary zipper style, we can use all kinds
of different back panel expansion options. So what's cool is they have this back panel that
you could use for different missions. So you could like put a pouch on it or whatever random pouches
you may want and just have it all set up to go and then just remove the entire back panel and
then put it back on if you need it. So you just zipper it on and you're all good to go. And just
like that. Oh, also it connects via these molly tabs too if you want to have it a little bit
tighter than just the zipper. But then you have a pouch that's just ready to go. You can like
pre-position it, pre-load it and have it all good to go. And then just have it on a back panel just
ready for a mission. So whatever you may need and if you don't need it, just disconnect it and just
toss it somewhere else and then save that for whenever you need it for that style mission.
The zipper system can also integrate into the 3-1 Assault Pack to connect it into the SMC or
you can connect into any other standard issued rear bags. All right. So let's take a look at this
1-3 Assault Pack. Okay. So it's got the zipper so we can connect it that way, but it's also got
normal like backpack straps. You could wear it like a regular pack. Okay. And you can tuck the
straps into this flap here. What about the side? Okay. Yeah. It's got a cool little area. You could
put the side straps in. All right. What about expandability? I don't like the other ones that
How big does this thing get? Wow. Okay. Oh my goodness. Check this out. Okay. I've gotten
distracted geeking out over this 3-1 Assault Pack. Let's get back to the plate carrier,
but I promise you a review of this bag soon. So you can put all the straps away. So then it's just
clean on the back. So it doesn't get hung up on anything. Then we can just zipper it on the back.
Then we have an actually usable 1-3 Assault Pack. Next, we'll take a look at the donning
and doffing tests. Due to the integrated tubes on the cummerbund, I found the donning and doffing
to be extremely easy. It was very easy to just put it on and then you just clip in the tubes.
And if it was any sort of emergency, you could easily just clip them down and just take the
whole plate carrier off either by the side cummerbunds or by the shoulder clips. Super
good design. Next, let's do a rifle cheek weld test. So I didn't find any issues with my cheek
weld. I found that I could actually pocket the rifle in a great place right into the shoulder
that fits right into where I like to seat the rifle for my cheek weld. This could vary for you,
but I do want to say that I was a little bit concerned that these QDs were actually going to
get in the way, but they're so high up your shoulder that they're really not going to make
a difference. And if they do, you can always switch down to that bracket instead of using this QD.
All right, let's move on to our last test, which is the prone comfort test. We'll do this
with and without the front plate placard. All right, so during the prone comfort test,
it wasn't the most comfortable. That padding that makes it super comfortable when you're
in normal positions starts to kind of jab into you when you lay in the prone position.
I think it's because the surface area of the plate carrier isn't dispersing all of the weight
of the body. It's just on those few pads and they're not the most forgiving. So it just puts
all that pressure against your body and it's just not the most comfortable thing ever.
So let's move on to pros, cons, and do I recommend it? So for the first big pro,
I'm going to say the ease of donning and doffing. Some people make fun of the fact that these plate
carriers have like the quick release and they don't realize how important that is.
It's often overlooked as a joke that you want a plate carrier that can be quickly removed,
but if you're stuck in a vehicle that's filling with water, you need to ditch your plate carrier
as quickly as possible. Plus, it makes it easy to train and goof around in your basement.
The next big pro is the design. It has both the laser cut MOLLE and the hook and loop.
They actually thought and planned ahead for whatever you may want to connect. Plus,
the cummerbund even has smart MOLLE segments. The final huge pro is the expansion. Since it
uses common connection points, it makes it perfect for any mission set. If you have a
particular back panel you need, just swap it out. If you want a longer patrol pack,
just zip it on. You want a front plate packer? Easy, just attach it. You want to have a slicker
mad carrier? Easy, just connect it up. This literally does it all.
Next on to the cons. As much as I love it, it has a few. The first one is that shoulder
adjustment. The velcro is sewn in place, so it's more than a bit of a battle to get it set right.
Thankfully, you just set it one time and then you forget it. The other con is the chest and
the back pads. I don't know if my chesticles are just getting in the way or taking a brunt of the
impact, but the pads aren't very soft or forgiving. So it means the majority of the weight is just
pressing against the thin strip of my chest. It's not the most comfortable.
So then, do I recommend it? I have a bit of a love-hate relationship with the Grey Ghost SMC,
but I do still recommend it. The expandability and versatility helps me overlook the carrier
constantly just jabbing me in my manliness. Big thanks to Grey Ghost Gear for sending us this
SMC plate carrier for us to review for you. Oh, and as one last reminder, you can use our
discount code TLDCO if you're interested in purchasing this plate carrier. Jason's actually
going to be doing a review of the Grey Ghost Gear Battle Belt, so keep an eye out for that in the
future. All right, everyone, thanks so much to our Patreon supporters. You're the ones that make
these reviews possible. And thanks to everybody that likes, comments, and subscribes. Comment
down below what you think about this Grey Ghost SMC plate carrier. All right, everybody. Bulsh out.
Nothing says manly like a purple flashlight.
