Blue Force Gear: Plate Minus V2

Ballistic Lab
1 follower
1 Video View·Jan 7, 2026
Blue Force Gear: Plate Minus V2
All right guys, it's that we're looking at the version two of the Blue Force Gear Plate Minus.
There's some interesting features in here that are not covered very well on their website
and I would like to show them to you guys. This is a small, obviously it's going to be too small
for me. I'm definitely on the higher end of medium plates these days and just medium plate carrier
sizing. So it's not quite as high as I would like it to be. I need to tweak the ride height on here
a little bit more. It is fairly comfortable considering it has side plates built into it
but I can feel a little bit of a hot spot on the back of my shoulders and I think that's really
just from not having the the plate as high as it should be. Once I fix that I'm sure it'll
be much more comfortable. So let's get this on the table and take a look at it and see
kind of the interesting features because there definitely are some on this version two plate
minus. All right so I went ahead and I pulled apart the front and rear bag on here just to
make life a little bit easier for everybody as we run through this thing. So like I said my only
experience with the plate minus before now was the version one which was a very very simple plate
carrier. It was just your front plate, rear plate profile and then it had you know a single side
release buckle for one inch cummerbund running around the sides and that was that was perfectly
adequate for what it was. I just very rarely can pare down what I want on a rig to just front and
rear plate bags so I needed a little bit of a cummerbund or at least to have options right.
One of the big things I appreciate about Blue Force gear is they pay attention to kind of
the finer points in their designs and some of those are more obvious than others.
So we'll run through the front plate bag and then we'll we'll check out the rear plate bag okay.
So you can see it's it fits the the small sappy pretty well. I don't have a backer in here right
now but I got plenty of stretch left in the panel that I have no doubt that a backer wouldn't cause
any issues there. What's neat on the version two and then again on the version four which we'll
look at in a separate video is it is side plate compatible right off the bat. So we'll get to that
in just a second. On the bottom there's a cut for your your tourniquet now or tourniquet hammock
whatever they're calling it these days. The shoulder straps have a nice pretty minimal
angle to them and it's going to be looped coming off the front bag facing up which I believe
makes it compatible with spiritus plate bags or cry plate bags if for whatever reason that's
what you want to do. Okay it does have some nice one wrap sewn into that to help keep
your shoulder straps together and then it's just I think it's it's just through manufacturing
kind of mirrors the the setup from the front plate bag or from the rear plate bag. So these
these hypalon cuts here are not you know super useful on the front plate bag but on the rear
plate bag they do provide some routing and mounting options going over your shoulders.
Up at the top of the plate bag you've got a little bit of velcro there. Pretty minimal footprint
and that's to allow space for the the laser cut here for that top row of molly. However if you've
a name tape or something or flag you just span that gap and it'll be just fine. You do have a
very nice molly field throughout the front plate bag so it's not you know not readily placard
friendly but it is kind of a bigger footprint plate carrier that hopefully you don't need to
change around that much. All right and then looking at the side plate pockets I think these
are really well done assuming that you have the correct side plates. So you do have this flap here
which is your cummerbund routing flap so when you when you pull the elastic around from the rear
it mounts right there. One of those finishing touches that I really appreciate that Blue
Force Gear does is both of these pull tabs have a little BB or something in there. I don't know
what the companies use for that. Feels like a BB to help give you something to to grip when
you're pulling those pull tabs. So you've got a pull tab on the flap and then a pull tab on the
cummerbund. The flap itself has a pass-through here in the velcro and I'm not quite sure
what Blue Force's intention was there. However if you wanted a flank mounted knife or something
like that you could probably fit a decent size sheath through that that pass-through if that's
something that you wanted. All right the actual side plate has this tweave pocket on the back here
so it fits MSAP side plates really well so anything that size should fit just fine. I'm
kind of doing this backwards so I can't really get this out as smoothly as I should be able to
flip this over and do that. It's got enough like tension and and tweave kind of spilling
over the side of the plate you can see it's not going to come out accidentally on its own
but you can pull that out and then you know if you if you didn't need a side plate it just makes
the front a little bit easier to work with and then you've got this pocket here that you could
stick whatever in there that you wanted to. It wouldn't be very readily accessible but it's there
if you need it. All right as far as the closure goes it's got hook on the body side and loop
coming around from the front plate. We'll get this out of the way it's a tweave plate pocket
on on both accounts the main plate and then the side plates. We'll look at the rear plate bag here
so you can see the shoulder straps like I said they do have some mounting capability there with
the little laser cut squares on the hypalon or the laminate as it should be and then on the
back plate pocket here you've got a cummerbund flap that's well done right so you've got plenty
of mounting space there for whatever cummerbund that you want to use with this and then you've
got this nice little bottom flap that really helps clean everything up so the flap itself
has molly so that's not limited at all and then you've got full molly going up the back of the
plate carrier itself. A little bit of velcro here is to interact with that plate pocket there so if
you can't you know fully get up to the the front of that pocket anywhere in there will work and
then the pull tab is there to help you disconnect it if needed and you've got a good bit of velcro
inside to engage with the the side plate face as well so plenty of continuity there. I will say
it's probably due to this being a small these rear cells on the the cummerbund are not overly
useful for me especially by the time you get you know far enough back that you've got a side plate
I really can't reach these. That doesn't mean they're they're completely useless you might be
able to keep something in there that you don't need readily available perhaps some added medical
supplies or you know maybe maybe a flash bang for a buddy to use I'm not sure how comfortable that
would be in here but you do have that capability if needed. The rear plate bag also has the tourniquet
now mounting option so you can have a tourniquet hanging off of each plate bag.
I don't remember what these were new I did buy them on ebay and like I said I tried to
tried to lowball thinking I would get denied on at least one of these but they both got accepted so
it's a it's a pretty well done plate carrier at the time I think it was probably a little bit out
of the price range that most people wanted to pay plus the information out there wasn't wasn't
super thorough so like I wasn't even sure I suspected that it took side plates but I wasn't
sure until I had it in hand because I don't remember seeing that explicitly stated on the
website. I was also competing with the the Elmac at the time which I've never had an Elmac so I
don't know but maybe that was the more popular option I'm not really sure but I'm glad that I
got these so that I could actually look through them and kind of see what they entail and it's
a pretty neat plate carrier all things told if you need side plates so thanks for your time guys
really appreciate it.
