Dominion 2067C 2-Speed All Metal Box Fan

TV Electric Fan
2 followers
6 Video Views·Dec 21, 2025
A vintage Dominion all metal 2-speed box fan model 2067C. The unit likely dates back to the 1960s. It appears to have been worked on somewhat extensively by someone previously as the motor looks revarnished and the paint is remarkably clean. A few parts have a rattle to them which should be easily fixed, otherwise the machine is still in perfect working order all these years later. This is a quality we will probably never see again.
20 bucks, still for like 200, usually, on your favorite website.
Wow, that's an accurate representation of market value.
Yeah.
And the problem is a lot of people use that for a reference to market value and it's not helpful.
It's incorrect, yeah.
Plug it into...
Yeah, the paint is like pristine on this thing.
You can just like see the reflection of the handle in the...
Yeah, if you want to get close up on the motor on the back, it'd take the grill off really easily.
Okay.
Has this been repainted?
At some point. Yeah, probably.
I don't think it has.
The blade looks like it has, but the cabinet looks original.
I think that's a cool feature, to be able to pop that off.
Yeah, you'd only need like an Allen wrench to take the blades off.
It's the only tool you need.
The windings look like they're very, very nicely varnished.
Yeah.
I don't think that's a factor. I think someone worked on this.
Yeah, he and I were looking at that and I said the same thing. I think they were varnished at some point.
Because a lot of these didn't even come with varnish.
And that's...
I mean, obviously the person that did this work did a pretty good job, but...
I would have used clear insulating varnish, not red.
Because this doesn't look great to me.
But, it's clean, it's preserving the machine, it's doing its job.
This tape's not supposed to be...
Oh, there's electrical tape, my favorite.
Because now when you go to take this off, it's going to be a stinking, sticky mess.
Might as well just take molasses and smear it all over the control panel.
Oh, nothing's bad on this. Oh, here's the information.
1960, right?
Yeah, April 26, 1960.
There's a way to decode the serial number?
It's at the back of the badge in the front, actually.
You can't really see it.
Is this PSC?
I don't know.
I'm surprised it's only 1.9 amps.
That's kind of low for a shaded pole.
Or does it say 2.9?
No, it says 1.9.
Why aren't there capacitors sitting in there?
I guess we'll be able to find out with the power factor.
That's the same kind of hookup that's on those LAU fans we looked at last time.
Oh, yeah.
I mean, fans back then, they were almost appliances.
It was a machine.
It was built to cool.
Because this was really before the air conditioner was popular.
This was the air conditioner replacement.
This was all you had.
And again, another Venturi ring.
It's disappointing that it's just not something that stuck with fans up until now.
Because it just makes so much sense.
But I'm sure they look at the cost of material, adding material.
Well, it did stick in some sense.
Because we had a bunch of Lasko models up until the 2010s that had similar concepts.
Which, for what it's worth, it worked.
It does make a difference.
These grills vibrate a lot.
Is it out of balance?
It doesn't seem like it would...
It's just the grills.
Kevin's not here, so I'll say it for him.
That's unfortunate.
I wonder if you could put some kind of rubber isolators on there to tone that down.
Yeah, or increase the tension somehow.
I'm sure it wasn't like that when it was new.
No, it's probably just aged.
Yeah, I bet the tension probably let up on this over the years.
It's got to be re-tensioned somehow.
This is very loose.
That should definitely not be like that.
It's 1925.
Oh yeah, that's pretty cool.
So that's, what is that?
40, 56, 65 years old.
It's still kicking.
That's a quality we'll never see again.
Look at the scoop on this.
It's just awesome.
It's a design quality we will never see again.
Look at this thing in hub.
Although, that's a stupid 380.
It is.
Maybe it was balanced enough and made with good enough material that it didn't wear out.
But that, even then, is a sign of cheapness.
Which is crazy to look at this and say this is cheap.
But at the time, this was the beginning.
I just love these oval blades.
Yeah, you can't beat the round blades.
Although, I will say, I think the McRoy Edison ones with the circle that wraps around them.
That is so cool.
I think that's probably the best blade design ever.
The McRoot?
Yeah, the McRoot.
But aerodynamically, this is a very good design.
And remember, this was done by hand.
This was not computer-generated aerodynamics.
You had legit engineers by hand.
Yeah, this is a talented person sitting at a desk with pencils and papers and an abacus at the time.
Yeah, basically.
Trying to figure out how this works.
And the result was a better product than what we can get today.
This is a two-speed, right?
Yeah, it's a two-speed.
Do we have any idea what the retail price was for this?
No, I don't.
I wouldn't be surprised if it was like $60-$70.
Yeah, probably.
Which today is $200-$300.
Yeah, yeah.
But they bought a product that literally lasts 50-60 years.
Yeah, the original owner got his or her money worth.
And their kid and maybe their grandkid.
Four or five generations prior or after that.
Put it on low.
Let's pull it out so it's not starving for air here.
One of these bottoms all chipped up on the side.
This looks like it was pretty rough at some point in there.
That's annoying.
Yeah, it's a grill.
And I put the grill on upside down.
This is a switch.
That's something up here.
No, it's a grill on the other side.
Nah, there's something in here.
You think so?
Yep.
I mean, it's taped.
I feel like we should be able to fix whatever that is.
Yeah, it's something with your switch here.
Oh, yeah.
100% that's what's going on.
That's annoying to even start on.
I wonder if we can...
Can we just tighten this down or something maybe?
Yeah, let's try to tighten that down.
I wonder if that's all it is.
Yeah, it's got to be something on the inside then.
It's not taking much force to stop it.
It's got to be something stupid in there.
We'll get it.
Fortunately, this is easy to service.
Right.
Virtually need no tools.
It's an oval.
Yeah, this is your problem.
This is not secured at all.
That's what's taped.
That's why whoever taped it, taped it I guess.
So, we just need to do something with this to better secure this.
That's all.
A little dot or something.
Yeah, or for now, we can just put a little shim there.
And that would probably quiet it down so we can get through to video here.
I would have busted a paint mixer.
Not that the plate would care.
We're turning it into toothpicks.
Seriously?
Yeah, well that's all.
Now at least we know what the problem is.
It's just the whole switch panel is coming off of there.
Well, that's a problem for you to sort out on another day.
And no, that did not just cut my finger off.
At least we know specifically what that is.
Yeah.
But if that's the worst we can say about the thing 65 years later,
I think it owes us nothing.
But I'm sure that's what that electrical tape was for.
Somebody probably tried it.
That's got such a nice deep rust.
It sounds like a machine.
It does.
So now you've got a combination of the badge and the switch thing rattling.
That's a moment of course.
Look at the ceiling fan.
Yeah, that's strong.
It is very strong.
That's so obnoxious.
I mean it is.
I feel like it's forceful.
It's a shame because it's so quiet when that's all not going on.
And it's in decent balance.
It's not perfect, but it's in reasonable balance too.
Yeah, I think we can resolve that.
Eddie, you and I can resolve that.
Yeah, that's fixable.
Yeah.
Just nuisance vibrations.
Yeah.
Serious nuisance vibrations.
I don't think it has much on the Lakewood though.
No.
But I do think it has more.
I mean it's just throwing air so forcefully out here.
Yeah.
It would be so quiet if it wasn't for all this dang noise.
Yeah.
That's really quiet.
The amount of clock on the blades is quite remarkable too.
That's a really good alignment.
That's kind of rare.
Yeah, this would be really quiet.
I'd fall asleep to this.
Yeah, this is a good bedroom unit.
It's quieter than any 3733.
It pushes more air than the thing does on high.
I'm surprised the air is even getting through the cabinet enough to move the sink and blades.
That's so nasty.
There's a miniature next to it.
Yeah.
The whole frame is probably the width of the blade.
It probably is.
Because this was a 20-inch blade.
That's a 20-inch cabinet.
Exactly.
Totally different.
Yeah, it's like they cheated with that now.
Somebody mentioned in the comments box, which was a very good point about this,
if you look at this, this is more of like a 14-inch fan
because you can see the only place that this moves air is from here to here.
Yeah.
So this spot of the cabinet is a waste.
It is a total waste.
And it's valid.
Yeah.
It's 100% valid commentary.
The blade itself is a true 20-inch.
Can they see that?
No, of course not.
Of course.
You're promoting especially motor cars.
Yeah, the blade itself is a true 20-inch.
That's what a 20-inch fan is.
Back in the day, that's what it was.
Yep.
But, you know, got to cut every corner possible.
The marketing jerks at this company will be like,
it's still a 20-inch fan.
But it's not.
And this, you can actually feel the air as soon as the blade starts.
Yeah.
Unlike the newer ones where the stupid air flow,
it doesn't start halfway up the fan.
So this is a good product.
It's noisy, but it's a good product.
That's a nice machine.
Never seen one around here.
I do have a couple of Dominion oscillating fans.
I always thought the blades on those were pretty cool,
with the lines through them.
But, again, I collect for nostalgia.
Yeah.
This does nothing for me.
Right.
It's an awesome machine from a mechanical standpoint
and a performance standpoint.
I'd take a 90s 373G over this any day.
Yeah, it's like when I talk about the Edisons.
Like, yeah, they're noisy, they rattle.
But it's nostalgia for me.
Right.
And it means something to me.
Yep.
This is noisy and it rattles, too.
But you know what, in Eddie's case,
you know what nostalgia for him is?
Think about it.
He was born in 2011.
So a 3733 from 2011 and newer.
So you could see why someone like himself
would gravitate towards things like this
out of pure of what it is or what it was.
At that age, I don't think I had any nostalgia
at that point in my life.
I was too young.
Remember, you give it ten years
and you'll be collecting those.
Yeah, that is interesting to think about.
These upcoming generations,
that's the nostalgia piece.
Oh, my gosh.
How sad is that?
I mean, I really don't know
where they can go next after this.
I think that hasn't changed in 20 years.
I know.
Although I thought I saw someone
show one of these with the boombox,
like a brand new one.
Yeah, I've heard that.
Yeah.
I mean, that doesn't do any difference to me.
It's the same.
It's just stupid.
Internals are the same.
Well, to me, it's just stupid.
It is another point that can go wrong.
Right, that and it's also,
I feel like it's Lasko just making,
trying to sell more fans by like,
oh, they're going to market that as something.
Oh, the plug is removable.
Yeah, exactly.
Well, Lakewood did that.
I just find it hard to believe that's cheaper
to have to terminate a cord out of,
like that's extra parts now.
Yeah, on a Holmes.
Holmes, yep.
Holmes does that too.
Halfway, in the middle.
They do that to save,
because the Holmes is so bad,
the switch is up against the motor.
So they save the wire that runs
from there to there.
They count the pennies.
You're saving three feet of wire
at the cost of it being
the most infuriating thing to use.
Oh, boy.
Those Holmes ones are awful.
Those are the worst.
Yeah.
If I see those in the trash,
they just stay there.
I don't even bother with those.
The 3733s, I mean, at least,
you know, they work for what they are,
but the Holmes ones,
I can't with those.
You want to move on to something quieter?
Yeah, you know what?
While we're on the Venturi kick here,
I'm going to go grab the Model 80.
Oh, yeah.
I've had a bunch of people ask me to buy one
and I can't rationalize them.
Oh, my gosh.
So now I'll be able to satisfy those people
and see what they want.
I'm going to go grab that.
This probably spins down for like 20 minutes.
Yes, it does.
I'll take this up and come back.
Is that a steel blade?
It's got to be heavy.
That fan weighs a ton.
That would probably fit the Air-King blade
because it's the same shaft size, I think.
Yeah, maybe.
That's incredible.
And this is not ball bearing.
This is sleeve bearing.
Good stuff.
A quality we'll never see again.
