LEGO Cars MACK Team Truck AND Trailer Speed Champions Custom Set! (Compatible with 77255)

Lego Happy Time
8 followers
17 Video Views·Feb 27, 2026
Join us as we build the Speed Champions Lightning McQueen (Set 77255) and then build a custom Mack Semi-Truck & Trailer to go along with him! Make sure to comment below what you think of the build.
Say hello to the Speed Champions Lightning McQueen. Wow. Inside the box,
you'll find five numbered bags with your 270 pieces,
your instruction booklet and sticker sheet. Wow.
So it's a fairly quick build and only took me about 20 minutes to assemble.
That's beautiful. All jokes aside,
this is a pretty awesome Speed Champions car.
I'm going to give you guys a full 360 degree spin so you can see all sides.
Most of the detailing is made up of stickers and this is probably the only Speed
Champions car that I'm actually okay with that because Lightning McQueen's
nickname in the Cars universe was Stickers, given to him, of course,
by Sally. There are a few printed parts, but overall,
I think the Speed Champions team did a phenomenal job capturing the likeness and
look of Lightning McQueen.
And I really hope that this is the first of many Pixar Cars characters to come
in Speed Champions form. However,
it could be several more years before we see any more Pixar Cars characters from
the Speed Champions lineup. So we're going to start building customs today.
And the character that we are going to be building is the Mack semi-truck and
trailer, who of course is Lightning McQueen's loyal transporter,
who gets him from race to race.
And this incredible Mack design was created by Austin and he has actually
broken up the build into two sections, starting off with the front of Mack.
This consists of 592 pieces.
It's going to cost you roughly $67 for those pieces.
If you don't have any of these parts left over in your inventory and the
instructions are going to cost you $6 as far as the trailer goes where Lightning
McQueen can actually fit inside. This consists of 1,131 pieces.
The instructions are free,
which I think is truly incredibly kind of Austin to provide for the community.
However, the pieces are pretty expensive.
As it's going to cost you roughly $142 if you do not have any of these parts.
So you're looking at a $200 build for the front of Mack and the trailer.
However,
there is one more additional cost if you want to get the decals for this semi
truck, which I feel you have to, because without the decals,
it does not look as good, nor does it match Lightning McQueen.
These decals are available from Bricky Prince for $30.
Now, thankfully we were able to greatly reduce the cost of the semi truck and
trailer here. Thanks to our parts inventory.
I did have to make an order on brick link,
which cost me about $84 for the pieces that I didn't have.
I had to purchase the stickers as well as the instructions for the front of Mac,
which roughly totaled to $120 for this build.
But I'm very excited to get started. So let's get building.
And just to show you guys here is the sticker sheets that came from Bricky
Prince.
This is not my first time ordering from them as they offer some very high
quality decals specifically for mocks and custom builds here in the community.
$30 is very expensive. However,
I just wanted to let you guys know that you are getting quality for what they
are asking in terms of their prices.
So after approximately two and a half hours of building,
I have officially completed the Mac semi truck and trailer transport for
lightning McQueen.
Austin did a phenomenal job on this build and the instructions were very easy to
follow. So as long as you've had at least a little bit of Lego experience,
I have no doubt that anybody could build this truck.
But without further ado,
let's get him front and center on the table because this thing is awesome.
It's a little delicate in a few spots,
but overall it is a very sturdy build.
So let's dive into all of its details and features starting off with the front
of the Mac truck with specifically his face.
I think Austin did an incredible job bringing this character to life.
I especially love the smile at the bottom of the truck,
which really adds to max personality.
And it's very similar to the design for the smile here on lightning McQueen.
Furthermore, if you look at the top of Mac,
I love how he was able to capture the baseball cap like top portion of Mac,
which is identical to that from the movies.
Turning Mac here on its side,
you have some great details and features all along the truck. However,
there is one main feature that was driving me absolutely crazy during the build
process.
And that is the fact that these mud guards right here on the sides of the wheels
kept falling off.
So that was really annoying.
I don't think the design for the mud flaps is very good.
However,
the toe portion here where you can actually put the entire trailer into the hitch
is designed beautifully.
And I really like how it's movable just like an actual semi truck coming over
and taking a look at just the other side.
You can see the decals that we put on really bring this bill to life.
And I think are really necessary if you're going to go out and add this to your
collection.
So overall the front of Mac looks fantastic.
The last little feature that I think is designed very well is the mirrors,
which are flexible and almost add a little bit of eyebrow detailing to his face.
So once again,
Austin did an incredible job with that.
So now let's check out the trailer where the speed champions lightning McQueen
can actually fit inside.
I want to first start off by giving you guys a nice 360 degree spin of the
trailer.
And overall it's very sturdy and very well designed.
There are two big issues that I uncovered with this trailer design.
However,
I will be addressing them at the end because thanks to the help of Austin as
well as Ricky Prince who provided the stickers or who does provide the stickers
if you purchase them for this mock,
we actually solved both of those issues.
So those problems have been thankfully figured out thanks to the build process
here with this video.
But we are going to focus on the positives right now.
And one of the biggest positives that this trailer offers is a similar feature to
that of the city formula one truck that was released last year as well as the
city Lego delivery truck that was released prior.
It is a really cool feature where you can actually lift up the panels of both
sides so you have full access to the interior space.
So in addition to both side panels being able to completely open up,
you can also pop off this top section to get complete access into the front part
of the truck.
And in the front portion of the truck we have a nice little Easter egg from the
first movie.
As you can see all of lightning McQueen's piston cup championship trophies
proudly on display.
Just behind the trophy shelf we have a tire rack with spare tires for lightning
McQueen.
But as most of you guys may know or remember from the first film,
lightning McQueen is not a big fan of going into the pits for a fresh set of
tires.
So moving slightly backward into the truck,
we have a space right here which is actually for another character.
Now this isn't movie accurate to the Mac truck.
However,
I'm going to be discussing what's supposed to go in this space later in the
video.
Coming back further now into the main portion of the trailer,
you can see we have lightning McQueen's entire sound system set up and this is
coming straight from the first car's film.
Moving back once again,
you'll see yet another Easter egg from the first car's movie as we have the two
mechanical arms that can actually give lightning McQueen a nice little after
race massage.
So now we're going to take a look at one of the best features that this Mac
truck and trailer has to offer.
You can actually carefully lower the ramp.
I say carefully because the design is not the best,
but it does get the job done and you can gently drive lightning McQueen up the
inside of the truck so he can fit nice and snugly.
Once you lower the panels and then raise the ramp back up,
lightning is ready to be transported.
Now as far as attaching the trailer to the front of Mac,
it's very easy to do so.
All you got to do is lower that technic pin into the trailer hitch and then
boom,
the lightning McQueen team is ready to roll off to their next race.
So now I want to discuss the two small issues that I uncovered while in the
process of building Mac and the first one is probably very obvious as some of
you may have noticed this large black space on both sides of the semi truck.
This is due to the fact that Austin accidentally put the wrong part in the
initial parts list for this build.
These four eight by 16 black panels are supposed to be red.
However, when he inputted this part in the parts list,
it defaulted to black.
The red eight by 16 panel is a completely separate piece number.
However,
I worked with Austin and he was able to update the parts list.
So as it stands right now,
if you go ahead and buy the instructions for Mac and the semi truck anytime in
the future,
then it will default to the red eight by 16 panel and not the black,
which will solve this issue of not having the red paint obviously continue out
through the rest of the semi truck.
The second solution as part of that issue as well as if you want to go ahead and
buy the parts for this trailer,
but still want to get the eight by 16 black panels instead of the slightly more
expensive eight by 16 red panels.
I actually worked with bricky prints.
They were amazing customer service was top notch.
They actually went ahead and developed a brand new sticker for this specific
design that continues the red another six studs.
So it gets rid of this specific gap.
So either way,
whether you go ahead and get the parts with the eight by 16 red or the eight by
16 black panels,
you are good no matter which piece you select due to the fact that the stickers
and parts list have now been updated.
As far as the second issue,
this was completely on me.
So if you guys recall a couple minutes ago,
I mentioned this space in the front of the trailer.
This is actually for the little forklift character Guido.
There are parts that are part of the parts list that Austin created to give you
the opportunity to build that character.
I thought when I ordered my parts that I was going to be receiving those pieces
from the various sellers that I bought parts from.
However,
the parts for Guido are listed in the secondary or extra parts section of the
semi truck.
So just make sure when you are going ahead and ordering parts that those parts
are included.
I did not make sure.
So that issue is on me and that's why I don't have Guido to go along with this
build.
I do plan on doing several more cars,
custom videos,
so I will make sure to order those parts.
So I have Guido a part of the next video.
I just want to say,
I think overall this build is very good.
I'm going to give it a nine out of 10.
It's very sturdy.
There's just a couple of weak points and I think it's an awesome addition to
anybody who is as big of a cars fan as me.
I think it's even more awesome.
The fact that you can actually put lightning McQueen inside the trailer.
The only thing that I would caution you with is that this is not meant for,
you know,
overuse or excessive play.
This is merely just a complimentary display model.
You can play with it a little bit,
you know,
put lightning in,
take lightning out.
But if you play with it too much,
the pieces are going to break off.
And now we have gotten several Mac trucks before from Lego,
none to which of this scale.
And if Lego was to give us an official model specifically from the speed
champions line,
I would guesstimate that here in 2026 or beyond,
it would cost somewhere around 120 to $150.
So with the current parts needed for this mock costing around
$200,
you're probably not too far off from what it would actually cost directly from
Lego.
But we'll see if Lego ever gives us anything other than your typical speed
champions,
eight wide vehicles,
because that's all they seem to be focusing on.
But I would love to see a future Mac truck from Lego at some point.
But in the meantime,
we have this beautiful build from Austin who did an incredible job and huge
shout out to bricky prints for not only responding to me so quickly,
but also coming up with the updated sticker.
So that either way,
if you go ahead and buy the black panels or the red panels,
you are all good for this design.
And this is why I love doing these rebrickable mock videos,
because I want you guys to be as best informed.
If you are somebody who likes putting together customs or rebrickable designs
so that you guys know the positives,
the negatives,
and that we can potentially work out any problems to better help you guys as
fans here and collectors in the Lego community so that you don't make the same
mistakes or have to go through the same problems that I have to.
But if you guys enjoyed this video,
make sure to hit the like button,
subscribe if you're new to the channel,
because we would love to have you join our Slap Shopper family.
I've got lots more cars videos in the works.
So if you're a big cars fan,
this is the channel to be at because this movie changed my life as a kid.
It was one of my favorites up there with Incredibles amongst the whole other,
you know,
Pixar family films.
But thank you guys so much for watching as always.
Don't stop shooting until you score and you can watch more of our Lego videos on
the end screen now.
