Replacing the Ceiling Fan in the Living Room – April 1, 2026

TV Electric Fan
2 followers
31 Video Views·Apr 2, 2026
Changing the ceiling fan in the living room 4/1/2026 from a 68" Hampton Bay Altura ceiling fan to a LASKO 3733 style ceiling fan, very rare custom built piece worth millions of dollars.
AI Generated·May contain errors
Hello viewers, today we're going to be changing out the ceiling
fee-in in the living room. I'm going to start out by switching it on and get the ladder set up
and we'll get this taken down. Good old hemp and sneeze. Hurricane test! Okay, good it's secure.
I think we're going to need this, the bit seems to be working pretty good.
And as we learned last time, we are not going to stick the screwdriver inside there anymore.
And these are not the largest screws that are normally used, these are smaller.
Okay, off to an excellent start here.
So it's going to be this one then. Got some nice spring peepers to accompany us tonight.
Nice sounds of spring. Very welcomed after this bitter winter we had.
Okay, so we're in a mix of how the screws come out. Yeah, this thing is just not very
installer friendly. I think we're going to try leaving the screws in there. That may or may not
be a good idea. I guess we'll find out. The table's kind of dirty. We'll just put them
over here for now. So we've got, we should have three of these floating around here, I think.
Or is there one still on the blade? No, we need to find the third one. Here it is.
Kind of surprising that it's like this because Hampton Bay was
usually very good about making this stuff installer friendly.
Stupid magnetic bits. Hmm, that one's actually busted.
All of these are busted. Well, okay, that's not accurate. Most of these are busted.
That is very concerning. Okay, we're going to have to revisit this before I
use this next time. Hmm, it looks like these are made out of very
cheap, it's like a molded pot metal type material, which is not not strong. Well, the good thing is
that this fan is still under manufacture, at least a flavor of it is. So we can probably
order new ones of those. But that is very concerning. You know, these do have a lifetime
warranty. So maybe I should call up Hampton Bay and say what the heck, design sucks,
give me new pieces. I wonder if those fragments are all over the floor somewhere.
They probably are. You know, I thought I heard like cracking when I was screwing some of these
in the first time. And I assumed, which is something that should never be done,
that it was the blades, the wood creaking. But it turns out it was not the wood creaking,
it was the nuts breaking. That's not very reassuring. Not in the slightest.
I wonder how many of these are broken. Those are not broken.
That's very concerning. You know, I'm sitting here sweating, we really don't have to.
We can open the windows and use fans. Put on this Galaxy here.
Do something about this window. Maybe I'll fix that tomorrow. Oh, for heaven's sakes,
you can't make this stuff up. It's super powerful. Let's get the rest of these busted
screws off of there. I guess those are classified as nuts. They're just very decorative
and very bad quality. Oh, not good. That is very, very concerning. That stinks.
Is that a piece of it right there? Yeah, there it is. That's part of it. I bet there's pieces
like that all over the floor. In fact, and I'm thinking about it, I've noticed,
and I've picked this up on my uncle's unit too, sometimes the whole thing makes a creaking noise.
Oh, that works. The fan makes a creaking noise when it's switched to high speed after not being
on for a while. I don't think that's these breaking because only two of them is busted.
I think that's just the blade shifting around. I'm pretty sure it broke on assembly,
but that's not good. Not good at all. That's the first time I've seen something
really not good about a Hampton Bay branded unit. I wonder if there's a recall for these. I'll have
to check. There's only two that are busted, but it's two too many. I'll have to do a separate
video on that, but it's certainly quite alarming. Why is this stuck? That's why it's stuck.
Counterintuitive is what that is. Oh, I undid the wrong screw. I have just created a very bad
situation here. A very bad situation. I'm going to have to put that screw back in
because this is such a heavy unit. Let's see. Maybe I can do it like this.
Oh, that did not create a bad situation. I thought this was hanging by the canopy for a second.
Okay. Sometimes these mounting brackets are made out of that
lousy pot metal material, just like the screws are. I have seen these, not this particular
series of fan, but I've seen these brackets break just the way the screws have. It's really
kind of scary stuff because you buy these products and you think that you just kind of trust the
safety of them and sometimes they're not safe. This is very difficult to get down because
it's so heavy. Oh, that's not good. Nope. I think other than an original, which is much
heavier than this, this is one of the heaviest fans I've installed, which would be logical
enough. It is a very, very large motor. Oh, here we go with the stupid medallion again.
All right. So we have a very, very special
fan to install. This is something that I had custom built for this room. It's very, very rare.
The only one known to exist. And it's kind of like a combination between a flush mount fan
and a Lasco 3733. It does actually use genuine Lasco 3733 blades, which is pretty cool. So it's
going to be very powerful. I've never used this before. We get to test it out together
today for the first time. It seems like the screws are a little bit tight on this side.
See if we can correct that.
Corrected. This medallion always adds a nice challenge here.
This does not have a light, so we can leave the light wires in there.
Come on, stinking medallion. Some adjustments might be required here. This is a little bit
crooked. Maybe it's just as well to blow over to the couch. All right, that's pretty good.
So here's the hookup, the power hookup. This is the power cord that it comes with.
And it's very easy to install this. All you have to do is just insert the
wire through the prong there and then crimp it back like this. It's so easy that you don't even
have to call a qualified electrician because you can do it yourself. It's a DIY product.
Much better connection than stinking those Wago nutty things and twist on wire connectors,
none of that's necessary. This is the best connection available. Okay, it's all hooked up
now and it's got good heavy duty BX cable so it won't get caught on the sharp edges of the down
rod. The wires are kind of long though, longer than necessary.
All right, perfect fit. Wow, just like a skunk. I guess we'll just leave the...
Fine, we'll do this. We'll just... Okay, it's bonded. All right, now we'll put on the blades.
They're made of plastic for extra safety.
I was very disappointed to see that this doesn't come with the blue fused plug.
And now I don't know what's keeping us safe. I guess that silver and yellow armored... No,
that's just a... What is that? A white plug? That white plug will keep us safe.
Who am I kidding? That white plug is not going to keep us safe.
Only the blue plug keeps us safe. Fortunately, this has AccuWarm so it's very easy to
install it. The screws already come pre-attached and it also comes with dust pre-installed so that
you don't have to worry about cleaning it because it already looks dirty as it is so it doesn't
change over time. Make sure the screw is really tight so the blades can fly off.
And we'll just go around and put each of these on here. Very easy install. I like the included
dust. That's very, very brilliant. Never have to clean it. It's clean as new. Whoa, the screw
is cross-threading. Okay, we'll put it in forwards and then we'll switch it to on and
that should be ready to go. Just make sure that the connections look good. Oh yeah, they look great.
Very good. Okay, let's go ahead and trigger the power. See if anything bad happens.
Nope, nothing bad happened. Oh, it's not very powerful. That's kind of disappointing.
Where are the 8000 CFMs? Maybe it's not on high. Huh, no, it's definitely on high. Maybe is it
going the wrong direction? Ah, there we go. Now it's moving some air. I had it on the wrong
direction. Very confusing. Now it pushes some good air. Wish it was a little quieter than that.
And I can feel just a little bit of air coming down here by the couch. Nothing too impressive
though. It's kind of unimpressive. It's a great design though. Very stable. Very sturdy.
Super aesthetically pleasing. Can't ask for much more than that.
That's kind of confusing. Why does it push the air down when it's running that way? Huh,
I would have expected the opposite. So does it push the air up when it's going this way?
Not really. This doesn't do much of anything. Oh shoot, the motor just broke. The motor is
completely ruined at this point because it's being reversed while it's on. So the motor just
breaks. Seems like it's still working okay. Gotta make sure we get a good thumbnail here.
Well, this is certainly a really great fan. Glad I found this. Very, very easy to install.
Not the most powerful and not as powerful as a like a box format of the Lasko 3733,
but it's still pretty good for a verticam seal mount unit.
