A Cycling Sweater, But Make It Aran

Victorian Threads
4 followers
4 Video Views·Aug 20, 2025
I knitted another Victorian Cycling Sweater, but this time I tried to eliminate the flaws of the first one.
This version is bright green, inspired by Aran Sweaters, with added cable details.
The project took about 10 months to complete, but this video is a short showcase capturing the vibe of the process.
Materials Used:
- 600 g of Merino 4-ply yarn (100 g/m)
- 8 transparent buttons
- 12 brass buttons
Today but one year ago I looked in the mirror and was quite disappointed.
Do you know those projects that you completed and were actually pretty proud of the result
but over time a few things stand out that could just be better? The violet cycling sweater I made
one year ago is one such project for me. Unfortunately it did end up being too big
and due to the binding also too stretchy. Furthermore I didn't consider that my
shoulders aren't as wide as my chest is and the original pattern did not account for that.
As a result the shoulders are very wide and the heavy sleeves pull them down even more.
I still like the sweater very much but it should be worn with a corset or just for a couple hours
without moving that much. But I wanted to make a better version and I had many ideas so I decided
to knit another one. This time was a wonderful green yarn which was dyed again by my mother.
I'm especially fascinated by cable knits and the traditional iron sweaters so I thought I'd try to
combine them with the original cycling sweater shape. Both styles showed up around the same time
and had widely different purposes. The iron sweater was allegedly created with the purpose
to overcoming the extreme poverty of iron fishing families and was made to be exported as a
traditional looking garment for special occasions. The cycling sweater on the other hand was made
for the sporty woman and had to be practical and hard-wearing. Nevertheless since I'm not using
the sweater in this original context I found the idea of combining it quite thrilling.
I started knitting the sweater and here is the front already.
Just kidding! I'm working without instructions in this case or rather I'm using notes I made
while knitting the first sweater as a reference for the silhouette. Then I'm adding the new elements
of the cable knits. A big part of the work was to calculate how many rows and stitches I need
and I made many mistakes. Since I didn't consider that this sweater has a completely different
binding than the first one I ended up with two less or too many stitches and had to remake the
first knitting three times. This was quite a challenging part for me because I had this idea
of how I wanted it and it just didn't work out. But I went through and remade it every time.
I could have made a swatch, it would have been quite smart, but I thought it wouldn't help since
the different patterns are all over the sweater and would behave differently anyway. So I chose
the rather frustrating path and unveiled it rather than making many swatches.
The thing I really struggled with is the fact that I have quite a pronounced bust but a small back.
So I always have either too little material at the front or too much at the back. Luckily my mother
came up with the idea to create a kind of dart by knitting shortened rows just at the front.
Here you can see those 12 rows which join on the sides almost like a sewn dart would. Once this was
sorted out I continued to knit the decollete and add the last braid for the collar. Again I chose
to make a high standing collar typical for the cycling sweater of the time. I also turned the
braid from the front to the back so that the turned part would show the braid the right side around.
Now that the bodice was finished I started knitting the sleeves which actually took months.
I am apparently no great fan of knitting plain patterns and I really had to push myself in order
to get to the point where the braids for the cuffs started. It definitely didn't help that
these sleeves are extremely large and therefore take a lot of knitting.
Knitting the sleeves was quite fiddly because of those many needles
but once I was accustomed to it it really went well.
And after quite some time I had almost finished the entire sleeve.
The second sleeve went quite well until I realized that I had forgotten to
reduce some stitches so I had to redo the cuff part once again. But fortunately I learned the
technique of adding a lifeline to the point where I want to stop the unravelling. It's basically
picking up the stitches of the row where you want to stop the unravelling. I think I'm quite
good in unravelling garments now and as you can see the lifeline works perfectly. Now I went on
again and knitted the rest of the sleeve which took as always quite a while. But luckily finally
I got them finished. I reassured that the sleeves are exactly of the same length and then I started
binding off the last row. I love this part of the knitting process because once the needles
are taken out of the garments it's really a garment. Then I only had to sew those pieces
together and I procrastinated on it quite a bit because well there was no actual reason to do so.
I used the same thread I knitted with. I just slid it in two so that it is finer and won't
create bulk at the sewing line. There are many ways you could sew together the knit
but I chose the back stitch in order to make a stable sewing line and to avoid that the
sweater loses its shape. The last step was to sew on the buttons. With the first cycling sweater I
realized that it's easier to first sew the button in and then the sleeves so I did this first.
Then I reinforced the buttonholes to make it smaller and also to make them stronger.
Last step was to add some transparent buttons to the inside because when you flip over the
color the beautiful buttons would be hidden. I closed the buttoning with the transparent
buttons and the beautiful buttons are on the outside. Then I gathered the upper part of the
sleeve into a big double box pleat and sewed the entire sleeve into the armhole. But before I sewed
the sleeve into the armhole I decided to sew the box pleat into place in order to secure it and
make it stay where it should. I didn't change the size of the sleeves and that's why I ended up
having again drooping shoulders and unfortunately I thought changing the buttons would suffice
in order to avoid it. But I couldn't test it and once the sleeves were knitted I didn't want to
remake them once again. So now I have to figure out another solution in order to keep those
shoulders on my shoulders. Maybe with some tape or I will come up with another idea. I will let you know.
I've actually finished the sweater so I could show it to my mom.
I went to visit my parents and I wanted to finish it before that day and when I was there I basically
didn't take the sweater off again. And is there anything better than strolling through a garden
and picking some apples or walking along the beach and finding some creepy souvenirs? I think not.
