It has been a while since I last posted a sewing tutorial, so I wanted to share this demonstration of how to sew an adorable Victorian apron. This historical fashion accessory is rather straightforward and simple to construct, and the apron is completely handsewn, so there is no machine needed in order to make this project.
One of the best elements about this 19th century fashion item is its supreme versatility. While I chose to make my own apron in a practical, lightweight linen, this same type of design could be made from any fabric, even decorative silks, and spruced up with various trims, embroidery, insertion lace, ruffles, and more. The possibilities are endless with this foundational base.
This garment is not only a historical fashion accessory, it's also ideal for those looking to spruce up their cottagecore or historybounding wardrobes, as it helps to give any ensemble an archaic or antique look.
Aprons are also a brilliant way to protect your historical clothing from food, staining materials, and other things that might get a garment dirty. I hope that I explained this historical sewing tutorial with clear enough instructions, but if there is anything that you need greater clarification on or need a deeper explanation of, I’ll do my very best to answer.
Time Stamps: 0:00 Why Did I Sew a 19th Century Apron? 1:30 What Materials Do You Need Need for a Victorian Apron? 2:48 Take Measurements & Cut Fabric 6:01 Make a Hem 6:51 Finish the Top Edge 7:27 How to Make Cartridge Pleats 9:42 Sew & Attach the Waistband 12:26 Sew Down the Selvedges (Optional) 12:41 Secure Hooks & Eyes 13:36 Final Thoughts on Making a Victorian Apron 14:02 End Screen
All music is from Epidemic Sound.
I realized I have not filmed a sewing tutorial in a while, so I decided to record this simple
demonstration on how to make your very own adorable Victorian or 19th century apron.
While a lot of this tutorial can be done on a machine, this video will show you how to construct
it using just hand sewing, so there is no machine needed. There are certain parts, such as the
cartridge pleats, which need to be made by hand even if you choose to use a machine for the rest.
For this tutorial, you'll need to know the basting stitch, the backstitch, the whip stitch,
and the felling stitch, all of which I teach in my seven essential historical hand sewing
stitches video. So if you are unfamiliar with any of these, I've linked the video in the cards.
I didn't use a pattern for this apron, rather I made up my own design by looking at a few photos
of extants from the Met. These three examples specifically were the ones that inspired me.
While I chose to keep my own apron extremely simple and straightforward, just know that this
design can be built upon and you can add as much extra decoration as desired. For example,
you could add insertion lace or a ruffle at the bottom. You could also add some embroidery. I
could not quite tell what the closure was like for these two examples, so I based my own apron's
closure on this third photo. In all, this apron took around seven hours to hand sew, and that was
with filming, which makes the process longer. For that reason, this makes for a wonderful day
project or if you'd like to have something quick to construct during a spare evening.
The supplies required for this project are really quite straightforward. You're going to need a tape
measure, fabric cutting scissors, smaller embroidery scissors, dress pins, a pencil or marking tool,
two sewing needles, a thimble, two hooks and two eyes, silk or another high quality strong sewing
thread, and a basting thread. I like to use bright contrasting colors for my basting thread because
then it makes it easy to remove later. And of course, you're going to need your fabric. You
will need about three quarters to one and a half meters of 45 inch to 60 inch width fabric of your
choosing. The amount will vary depending on how long you want your apron to be and how tall you
are. On my own short frame from natural waist to knee, I only needed about three quarters of a
I am five foot three inches for reference. The width should be the typical width that your fabric
already comes in, but the wider your fabric naturally is, the more voluminous the pleats
will end up. I opted for a handkerchief weight linen, but your own project does not need to be
made from a more practical fabric. You can use the same design to make more of a fancy or decorative
19th century apron by opting for silk or any other printed or bright colored fabric. The
possibilities with this design are endless and beneficial for numerous applications. After
gathering your materials, you will want to take your measurements. Begin by measuring your natural
waist or the smallest part of your torso. You will want to take this measurement on top of all of the
clothing you plan to wear below the apron, underpinnings included. Write that measurement
down somewhere, then measure from the point of your natural waist to where you want the apron to
end. I wanted it to end around my knees, so I decided upon that number. You can of course make
a full-sized apron if desired, it's completely up to you. Essentially, the apron is constructed of two
pieces, one waistband and one apron body. Since I didn't use a pattern, I wanted to make sure that
you all had a clear visual representation of how I cut the pieces, so I drew this diagram. It's
available through a link in the description box for free as a download, so be sure to save this
image for yourself so you can reference it later. For the apron body, the length will be the
measurement you took from the point of your natural waist to where you want the apron to end,
plus half an inch for the waist seam allowance and two inches for the hem allowance. The width of the
apron body will end up being the width your fabric already naturally is from selvedge to selvage, as
you can see here in the diagram. The waistband length is the measurement of the circumference
of your natural waist plus one inch of seam allowance and one inch for overlap where the
hooks and eyes will connect. The waistband width will be two and a half inches plus one half inch
for seam allowance. Here you can see the same diagram with my own measurements plugged in.
I have a 25 inch waist, so the apron waistband ended up being 25 inches plus one for seam allowance
and one for overlap, for a total of 27 inches. My measurement from waist to knee where I want the
apron to end is 26 inches plus two inches for hem allowance and half an inch for seam allowance,
making a total of 28 and a half inches. I should mention that if you are curvy, you can also use
the same formulation, but depending on the width of your fabric, your cartridge pleats might not be
as densely packed. For that reason, you may want to consider either having your apron cover less
of the side body, or you can also connect two identical pieces of the apron body fabric at
the center, so connecting two selvedges together, which will then mean that there will be a center
front seam running vertically. This center front seam will be somewhat obstructed by the volume
from the pleats. If you do choose this option, just be sure to cut two apron body pieces instead of
just one. Begin by marking and cutting out your fabric. I decided to cut the waistband first,
then I moved on to the apron body, marking the length at the 28.5 inch mark, which I decided
upon earlier by plugging in my own measurements. The great thing about linen is once you start a
small incision, you can actually just tear the fabric down a straight line. If you are using
this method, just try to straighten out the edges of your fabric as much as possible. I would also
not recommend this for many types of fabric. For example, don't do this with silk. This method
primarily works with linen. As you can see here, the apron body length is the cut edge, while the
width runs from selvedge to selvedge. You will want to use these selvedges to your advantage.
The apron is eventually going to gather in, like demonstrated here, to create body and volume.
Next, mark one inch at the bottom edge of your apron body on the wrong side of your fabric. This
is going to be the first fold of your apron's hem. Fold that one inch over onto the wrong side of the
fabric and pin it in place along the entire length of the apron bottom edge. Try to keep the fold as
straight as possible. Take your sewing needle and basting thread and run a basting stitch all along
the fold. It'll end up looking something like this. Then fold over the same edge again another one inch,
creating a tube where the raw edge is concealed. Pin the double fold in place and stitch it down
using a felling stitch, picking up just a thread or two of the fabric with each stitch so that the
stitches are hardly visible on the right side of the fabric. Once this secure row of felling stitches
is complete, go ahead and remove your basting thread. This is a very satisfying part. Move on
now to the top edge of your apron body. Mark one quarter inch at the top edge on the wrong side of
the fabric and fold over the edge one quarter inch. This is the edge that is perpendicular to
the selvedges. Pin this edge down securely and repeat the same steps as before. First, basting
down the fold, then folding the fold over again another quarter inch, encapsulating the raw edge.
Pin the double fold down and sew it securely using felling stitches. Once done, satisfyingly remove
the basting stitches. Now both your hem and waist edges are all secure and we can move on to the next
step. At this point you will want to get your tape measure once more and you will have to decide where
on your side body you want your apron to start and to stop. I generally like an apron that covers a
bit further back, but some individuals like when an apron just covers more of the front body. For my
own apron, I decided on 16 inches starting and stopping at these points. Moving back to your
fabric, tuck under the selvedges to the wrong side of the fabric and pin them down. This will just
help to secure them so they are tidy later on. Using a measuring tool or your tape measure, along
the right side of the finished waistband edge of your apron body piece, mark a line every one half
inch. This is where the stitches for your cartridge pleats will go. As you can see here, I accidentally
skipped one here, so be sure to mark every one half inch and go down the entire width of the fabric
from selvedge to selvedge. Make a mark about one eighth of an inch from the edge of your fabric
and another mark one inch down from that. This denotes where the two rows of your parallel
stitches will go. Thread two sewing needles with long pieces of thread about the length of your
entire width of fabric, not the end of your thread. Be sure that the knot is on the wrong side of your
fabric so that the needle comes out from the right side of your fabric, and also make sure that your
selvedge is securely tucked under for neatness. Repeat the same process for the second threaded
needle at the point one inch below the first threaded needle. One needle at a time, run your
thread in and out of the fabric at each mark, similar to how you would run a gathering stitch.
Once both threads have been threaded through the entire width of the apron body top edge,
pull on the threads to begin gathering the fabric. This is also an extremely satisfying part.
Tug on the fabric to keep the cartridge pleats tidy and even. The measurement you took earlier,
where you'd like the width of your apron to start and stop, will now come into play. Lining the
pleats up with a ruler, adjust the density until it matches the number you decided upon earlier.
In my case, it's 16 inches, so I just kept adjusting until I reached that goal. Try on
the apron body by placing it up to your body and see if you are happy with the result. If not,
make adjustments. Once your adjustments are all made, knot the end of the two threads securely
so that the cartridge pleats stay in place. Finally, we're moving on to the waistband,
which is the second and final piece of the construction. Using an iron, press your waistband
strip in half lengthwise, wrong sides to wrong sides. Then, iron under the seam allowances,
which will be 1 quarter inch for each side. This will hide the raw edges inside of the waistband
tube that you are now creating, like so. Measure your waistband and make sure it's the right length
for your waist. Additionally, on the short end of the waistband, opening up the folds,
tuck under the seam allowances as well to the wrong side. Secure this shut by sewing whip
stitches and continue whip stitching the entire tube shut so that all raw edges are encapsulated
inside of the waistband. Once complete, your waistband will look something like this. Wrap
your completed waistband around your natural waist and make sure it all fits well. There
should be about 1 half inch or more of overlap on each side where the hooks and eyes will meet.
I ended up with about 1 inch for each side because I made my seam allowances slightly smaller. You
can do the same, this will just offer a little more room to make any future alterations to the
by moving the hooks and eyes back. Find the center front point of your waistband and mark it.
Find the center front point of your cartridge pleated apron body and mark that as well.
It's time now to attach the waistband to the apron body. Matching up the center front points,
pin the wrong side of the waistband to the right side of the apron body. This ensures that the
tops of the cartridge pleats will be hidden when the apron is seen from the right side.
You will want to pin the apron body about 1 quarter to halfway up the waistband width
so that some of the waistband is left alone and doesn't have cartridge pleats attached,
like in this demonstration. There will be a point where each fold will meet the waistband
and at those points you will want to place a pin. I would recommend pinning at every single dip in
the fold. You're going to later sew each one down individually so this is the best for a clean,
finished look. This process is a bit time consuming but will be worth it. Once you're
done pinning it will look something like this. Taking a threaded needle, you're going to whip
stitch each cartridge pleat fold onto the waistband. For the selvedges, flatten them
out slightly so that their edges lay flat on the wrong side of the fabric. Additionally,
run your whip stitches between the two layers of the waistband so that the stitches aren't visible
on the waistband from the right side. For the rest of the cartridge pleats, you will want them
to keep their upright volume so try to stitch them in a way that you don't squish them down.
Once they are all stitched, they will look stunning and voluminous. Cartridge pleats are
one of my favorite historical sewing techniques. You can see here they are all kept as upright as
possible to retain height and at the selvedge they are flattened down just to keep everything neat.
You can see also how these stitches don't show on the right side of the waistband. I went ahead
and folded under the edge of one of these selvedges again because it had a red line I didn't
like. In order to keep both of the folded under selvedges completely secure, I am choosing to
stitch both sides down. However, you can skip this step if it doesn't bother you.
Now we are going to mark the hooks and eyes. Wearing the apron, find out where the two sides
meet and then mark that point on both sides of the waistband. Measure your waistband from one
mark to the other and this measurement should match with your natural waist number. As you can
see here, my measurement is 25 inches and so is the tape measure reading. Everything matches up.
To ensure your hooks and eyes are on the correct side, place your apron down as if you are wearing
it on your body and wrap the waistband around so that the marks on the edges meet. Imagine hooks
being on one side and eyes on the other and visualize how they might connect. In my case,
I decided to sew the two eyes on first to the right side of the right edge. Then I proceeded
to sew on the two hooks on the wrong side of the left edge so that they would connect to the eyes
when secured. Here are the eyes completely sewn on and here's how they fasten with the hooks.
At long last, your adorable and simple Victorian apron is finally complete.
This design has so many applications and is very versatile for all of your 19th century apron needs.
Aprons are a beautiful way to accessorize any historical fashion or history-bounding garment
and they can be immensely practical as well. I hope you enjoyed this tutorial and found it easy
to follow. Please let me know in the comments down below if you have any questions and I shall do my
best to answer them. Thank you so much for watching and I'll see you all on Thursday for another video.