Victorian Bustle Pad: Adding Volume to Your Silhouette

Victorian Threads
4 followers
20 Video Views·Jul 12, 2024
I show you how to create a Victorian bustle pad—perfect for adding that extra volume in the back for an authentic 19th-century silhouette. Learn how this essential undergarment was used to enhance the shape of Victorian dresses and create that iconic, dramatic bustle effect.
Hello everyone and welcome back to another historical knitting video. I'm really excited
to share with you what I've been working on this week and that has been a 1892 bustle pad. If you've
been following me this far then you'll know that I'm actually working on making an entire outfit
from 1892 and hopefully hand knitting most of it. So far I finished a pair of stockings,
my combinations, the trimming for my corset, as well as a knit petticoat. And now I've decided
that the next piece that I'll work on will be the bustle pad itself. When deciding what my
bustle pad was actually going to look like I did look to a few different places to see exactly how
I would choose to make my own. I know that Bernadette Banner, who's a fantastic research
for all things historical dressmaking, she made a patented 1903 bustle pad which is a nice small
size but just the right amount of padding to get that extra volume in the bath. It was from 1903
and my outfit is closer to 1890-1892 so I wanted to see if I could find some examples that were
maybe a little bit earlier than the 1903 patented pattern. I did find in the delineator that in the
1898 edition they have some pretty detailed instructions on how to make your own bustle
pad with a nice lace trim. And then what was even closer to the time period that I was looking for
was an 1890-1891 fashion catalog which had a bustle pad in it that I actually really liked
the look of. Now it didn't really have any instructions on how to construct it so my
idea is to kind of take the detailed instructions from the 1898 pattern and the 1903 patent to kind
of create the look of the 1890-91 bustle pad itself. Most of this project will actually be
sewing. I am definitely not an expert sewer as you can probably tell from my last video
sewing the yoke was quite an ordeal for me but I've watched a ton of videos and I've tried to
do some practice so I'm hoping that this time I'll be a little bit better than last time.
How I'm going to bring historical knitting into this is I'm actually going to choose a lace trim
from the book that I've been working off of, the pattern book, which is The Art of Knitting and
this is an original 1892 copy of The Art of Knitting and in the front it has just an amazingly
beautifully long section of lace trims and lace insertion patterns so I went through a whole bunch
of them and I decided to take this one in particular because I thought it looked quite
close to the bustle pad illustrations lace itself and after reading through the instructions they
look pretty straightforward so if you guys are interested in making this exact same lace I'll
put the link to the free pdf down below so that you guys can also work off of this exact same
pattern. As I'm going through it I'll write up my own instructions I'll kind of translate it to like
the modern US knitting instructions and I'll write out a lace chart and I'll also provide a
link for that pattern down below and I'll provide it for free just so you guys can see what my
patterns look like after I write them up. Okay so I think it's time to get sewing and knitting, wish
me luck! After writing up some notes on the pattern myself I decided to create a sample of
the lace that I was going to use a trim on the bustle pad in a quite thick yarn just to double
check that the instructions were correct so you can see here that that's what I'm doing right now
is I'm testing that lace pattern and I think that it actually turned out quite well very close to
what the picture looks like I think the shadow is actually also really nice to look at too.
The sampler lace is far too wide and that's because I used 1.5 size needles and quite thick
yarn now it's time to do the real lace and for that I'm actually using quadruple zero size needles
which is the smallest needles that I've ever used so for a size comparison you can see how small
that is in comparison to the size 1.5 and for this I'm starting exactly the same way casting on
I believe 23 stitches before just continuing on in the lace pattern. I had a fun time marveling
basically at how tiny these stitches are and I will say I wish that I could use wooden needles
for this because these metal needles are very slippery and stitches are so tiny but I'm pretty
sure that the moment I took those wooden needles in hand I would have snapped them in half right
away so metal needles it was. With the quadruple zero size needles and my alpaca yarn I'm using the
exact same yarn that I made the combinations out of and that I made the corset trimming out of which
is the Knit Picks alpaca cloud yarn in the colorway Sophia. It is a bit fuzzier than I think
that traditionally lace would have been made out of but I do really like that halo effect on the
lace that I have. It's going to take me quite a few pattern repeats in order to actually create
enough lace to trim the bustle pad so while I continue to work on the lace I'm actually going
to start showing you the progress that I'm making on the bustle pad itself. I decided to create my
own pattern for the bustle pad itself and I decided to use the yoke of my warm petticoat as the basis
for the top curve of the bustle pad just so that it would lay well against my waist. So here you
can see that I'm tracing out against the top curve of the yoke of my skirt as well as just kind of
using the size of that skirt as a good eyeball measurement for how long and how wide to make the
bustle pad. And here you can see that I just completed my first mock-up of the bustle pad base
and I did make a few more adjustments. I thought that this was slightly too pointy at the bottom
so I made those adjustments and then decided to use that as the base for the full mock-up
that I was going to make. After I finished cutting out two identical or hopefully nearly
identical pieces I decided to sketch out some of the other stitching lines that I would need
on the bustle pad. Since this is just a mock-up I decided to eyeball it as close as possible and
then I thought I could do my final adjustments on the final piece depending on what I thought
of these rough sketches that I had done by hand. And here's the moment of truth for my sewing.
This is what all this week's video watching and practice has come down to and I have to say that
this sewing feels so much better than last week's sewing. My curves aren't really all that
well done but at least I am not getting all the snagged thread like I did last time.
I'm so proud of these stitches. There's no more tension issues or at least not quite as bad
and now it's time to practice stuff the bustle pad itself. So here you can see I'm just using
some cotton stuffing to try to mimic the stuffing pattern in the example bustle pad.
I wasn't entirely sure of how I was going to do this in terms of the stitching order versus
stuffing order. I did know that this like bottom stuffing pad had to be stuffed before I sewed it
down. There was no way that I could figure out how to get the stuffing into the complete bottom part
so I'm doing my best not to stitch over the stuffing and just stitch next to it and that's
why I had a ton of pins in there. And here you can see I decided this time that I was going to
stitch those straight lines first for the center compartments and then stuff afterwards. And this
ended up working out pretty well. I did use a knitting needle to help distribute it a little
bit easier and a little bit better but I think that the stuffing distribution worked out quite
well for this. I ended up sewing the top part down and then pinning the sample ribbon to the
top as a way to tie it around my waist just to test out the mock-up and see if I liked the size
of it. Besides the wobbly lines and the fact that I didn't turn this mock-up inside out before
stuffing it, I think this actually looks quite good and I'm really happy with it so I decided
to use this exactly as is as the basis for my pattern. I also decided to test how my lace looks
against the size of the bustle pad and I think that the size and width of the lace looks very
nice against the size of the bustle pad. And now it's time to do it in earnest. I decided to use
the fabric mock-up as the pattern on top of my real fabric that I was going to make the bustle
out of. I wish that I had made a paper pattern because it would just hold up better when I was
tracing around it but I ended up making it work. I also wish I would have taken like 30 seconds just
to iron or steam that center seam out of the bustle pad but this was very late at night and I
really wanted to get some progress going so I ended up not doing it but I might try to steam it later
on and see if I can get that seam out. I think my second attempt at sewing around the bottom edge
of the bustle pad went much better than my first and while there are still some wobbly lines
especially around the tightest curves, overall I'm quite happy with how this stitch turned out as well.
I was pretty pleased with the tension on both sides. No more snags. This time I turned the bustle
pad inside out before stuffing the bottom roll and I decided to do this very similarly to how
I did the mock-up which is first stuffing it with cotton for the bottom roll, pinning that down
tightly and then stitching that down. For the mock-up I didn't like how uneven my lines were
when I was stitching the second u-shape on the bustle pad to hold in the stuffing so I decided
to create this basically paper guide that I cut in half from like a folded over sheet of paper
to kind of make it even on the right and the left and I think it actually helped me a lot. I didn't
stitch through the paper, I just used it as a guide and I think that it made for a really clean shape
and really clean lines. I used the same idea as the paper for the guides for the straight lines
along each side of the center seam or the center of my bustle pad for the other chambers to stuff
and I think that that also helped. I felt like I had nice clean lines. Then it was time to stuff
the bustle pad very similarly to how I did the mock-up. I just added a little bit more stuffing
I think than I did for the mock-up version just to give it that nice volume that I wanted.
Similarly to the mock-up, I pinned the ribbon to the waist area of the bustle pad. I pinned it a
little bit lower because I wanted to just make the bustle pad a little bit shorter. I had done
a quick test fitting so I pinned it at just about the width of the ribbon itself and I decided after
sewing it down to trim the bit off the top that was sticking out over the ribbon's edge. While I
thought that the stitching actually turned out quite well, I wasn't too pleased with how visible
it was and I think that's just a function of the fact that the ribbon that I used was very satiny
so the stitching was quite visible. But at this point I'm actually done with the bustle and it
was time for me to move back to the lace. In between all the sewing sessions, I had continued
to knit more and more repeats of the lace itself and at this point I was well over 20 repeats in
and I've been measuring it against the bustle all along the way just to see if I have enough. And I
really like how the pattern turned out and once again I'm always fascinated with the shadows
that this lace throws. I think it's really beautiful. So you can see here that I'm measuring
up the lace against the bustle pad and it looks like I have enough to trim it right at the bottom
roll and this is unblocked so I was hoping that once I block the lace that I would gain enough
length to kind of put those creases in it. So here I'm just using a bit of cardboard that I've cut up
and some pins to pin down the lace and pin it in place before blocking it itself. For the bottom
border I wanted to make sure that it would stay nice and straight and I don't have really any
pinning materials so I just decided to use the other needles that I had in my set of double
pointed needles in the quadruple zero size. And for the top edges I just used the normal pins to
pin the tops of those diamonds in place. I decided to steam block this lace once again rather than
washing it and then waiting for it to dry and this was actually really really quick, much faster than
waiting for it to dry and I think the results actually came out very well. The lace held its
shape quite well and it didn't shrink back too much once I took out the pins. I had a slight
disappointment after blocking this lace where I laid it out against the bustle pad where I wanted
to pin it in place and it just hadn't grown enough in length even though it didn't shrink back so
much and I really wanted it where the basically the zigzag or diamond edge was facing towards
the bottom. So you can see here I'm trying to figure out exactly how much more length I have to
add in order to make the lace the exact length that I want. So I created a few more repeats, I did more
blocking, I did more steaming and I think that in the end I finally ended up with enough lace to
fully trim the bustle pad. I then pinned that lace in place on the bustle pad and then I hand sewed
it to the pad itself through the top edge just making sure not to go all the way through the
pad just kind of hitting that top layer of fabric. And here you can see sewn in place the bottom is
completely flexible and movable. I also decided to stitch down the top edge just so that it wouldn't
curl back and it would stay laying nice and flat. And there you have it an early 1890s bustle pad.
I had a lot of fun with this project. It's the first time that I think I'm remotely proud of my
sewing and I really like how the lace turned out. So thank you everyone so much for watching again
this week. If you enjoy this video feel free to give it a thumbs up. If you would like to see more
content like this you can go ahead and subscribe. The next project I'll be working on is another
petticoat to go on top of my bustle pad and I hope to see you all again really, really soon.
