The Making of a Victorian Petticoat

Victorian Threads
4 followers
111 Video Views·May 26, 2024
In this video, I take you through the process of creating a beautiful Victorian petticoat, showcasing each step of the construction. Using luxurious materials such as ivory silk taffeta, delicate insertion and hem lace, and fine silk thread, I demonstrate how these elements come together to craft an authentic piece of historical clothing. The petticoat is finished with hooks and eyes for a secure fit. Follow along as I transform these materials into a classic Victorian garment.
Materials Used:
Silk Taffeta (3 yds): Burnley & Trowbridge in color 'Ivory'
Insertion Lace (2.5 yds used, 4.5 yds needed): Mokuba, NYC
Hem Lace (4.5 yds): Mokuba, NYC
Silk Thread: Steinlauf & Stoller, NYC
Hooks & Eyes (x3 pairs): Steinlauf & Stoller, NYC
In my endeavor to construct a Worth-like gown for the elusive 1890s ball that has now time-traveled
into 2021, I will be needing a petticoat. Not the trash-cotton muslin one with the overlocked hem,
elastic waistband, and otherwise unfinished seams that I made when I was 16. No, a real, proper,
grown-up Victorian petticoat out of silk taffeta with pin tucks and lace insertion and stupid
hook-and-eye closures. This video is the third in the 1890s gown series, which has kindly been
sponsored by Skillshare, but more on that anon. For a basic pattern, I consulted our good friend
Agnes Walker, a free digitized copy of her book Manual of Needlework and Cutting Out,
which can be found in the description box below. You may recognize this from the combinations
project I did last year. Referencing the diagram in Agnes Walker for pattern shapes, I proceeded
to design the petticoat according to contemporary examples listed on the Met Museum's online
collection. This informed me where would be logical to put lace, frills, pin tucks, etc.
If you watched the first part in this video series, in which I venture out to purchase the
materials for this project, you'll know that I found these two beautiful laces at Makuba that
I intended to put on a petticoat, so I'm incorporating these into the design. Let me just say,
having the right lace for Victorian underthings is crucial. If I hadn't found these laces that
were the right quality and design, properly reminiscent of actual 19th century lace,
I would not have bothered to make this petticoat. On a project like this, the lace, however small,
should be the biggest investment. I have just traced off the petticoat pattern from this.
I've only gone down to about the knee, so I've made them 24 inches long, which is still a little
bit longer than they need to be. I was just measuring from my waist to my knee, but of course
did not accommodate for this little four inch yoke that goes on at the waistband, which is this
bit here. So it's a bit long and I know that, and that's good because I have some room to play
with whatever height this pretty frilly, floofy bit will be. So this strip here is going to be
one and a half times, wait, is that math? It's going to be double and, okay, so whatever the
length of this finished hem here of this knee length petticoat bit, it will be that plus another
one plus one half of that. That will be the length of this. This will get gathered onto this to make
a little floof layer. And then there will be some pin tucks. There will be this insertion going in
there. And then this edging lace will sit on the edge. So I have enough of this. I don't have
enough of this. I'm going to start just by cutting out these upper bits of the white silk taffeta
that I have to make this petticoat out of and start getting these seamed together. I'm going to
worry about this later once I have this together and I want to get this fitted and all nice and
done and put together. And then we'll start messing with this because this is where the finicky and
expensive stuff starts to happen. So I want to make sure all of this works, all of the proportions
are correct before we get into this. The silk taffeta was not purchased during my project
Shopping Escapade back in ye olden days before the plague, but instead was ordered from Burnley
and Trowbridge, who thankfully were still shipping as normal. In an effort to avoid poking unnecessary
holes into the taffeta, which is prone to show holes, I'm wading rather than pinning the pattern
pieces for tracing with the trusty assistance of Sundry Household Objects.
Once the pieces are cut out, I can go ahead and pin together my skirt panels and begin stitching.
Authentic Victorian dressmaking techniques, a reprint of a 1905 sewing manual, instructs that
while smaller undergarments are frequently made by hand, quote, the amount of work necessary to
make nightdresses and petticoats inclines one toward the machine method, unquote. So I shall
be constructing the main seams for this petticoat on my appropriately 1891 machine. I should also
note that there is a placket at the center back opening, which gets stitched around three sides,
leaving the long side to be attached to the skirt opening. The yoke piece is likewise
stitched around three sides, with the bottom edge left open for attaching to the skirt part.
The skirt seams are French-seamed. Once again, Victorian dressmaking techniques gives us the
instruction that, quote, no raw edges of material are left at the seams in this class of work,
unquote. Likely because undergarments, which were worn next or closer to the skin,
were frequently washed and thus needed to be strong. Quote, every seam is either a French seam
or is felled. The French seam is used at what may be called the regular seams, unquote. That is to
say, the main long seams of a garment. That curved or upper seam of the yoke is clipped so that the
curve turns smoothly, then it's flipped inside out and pressed flat. I can then pin just that
inside layer of the placket to the eight-inch opening left in the center back of the petticoat
seam, with right sides together, which will allow it to open and close. In retrospect, I didn't
actually need to stitch and turn that top edge of the placket either. It could have just been
left raw to line up with the raw edge of the skirt waist, and in fact, I did end up cutting this off
later. To finish both the placket and the skirt raw edges on the inside of the petticoat, I turned
under the raw edge of the placket and felled this down with tiny stitches. The Victorians were real
hype about tiny, almost invisible stitches, so using some fine silk thread, I'm endeavoring to
make my stitches as small as possible. The other side of the petticoat opening is just finished off
by hand with a quick felled hem. No, I still don't understand the physics of French seams and ended up
with my pencil marks on the outside instead of the inside, and for some reason shifted the placement
of the placket a bit for no reason, but shh, it's underwear. Insert pointless quip about nobody but
the entire internet ever getting to see it. Okay, so here we are so far. The seams of the petticoat
are all stitched together, they are French-seamed and pressed and ready to go, as well as the waistband
is all prepped and ready to go. This petticoat is obviously meant to have some gathering at the
waistband. I have measured up this yoke bit to my own waist and figured out how wide the overlap
needs to be, so it'll just be like this. I will attach the skirt all around here, up to here, but not
from here to here because this will cross over and just sort of lay like that. I don't know if you can
understand right now, but you shall see very anon. So what I'm going to do is I'm going to match up
center front and center front seam, obviously center front of the skirt to center front of this
waistband. I think I only want about three and a half to four inches of gathering at the back, so I
will pin it up flat all around there, and then the last like two inches on each side I will leave
free so that I can run a gathering thread through the top of this and then gather it up to fit into
this waistband. That's my plan for now. To gather the two halves of the center back into the remaining
yoke bit, I'm running a gathering thread into the skirt edge by hand. Victorians were likewise
exceedingly passionate about gathers. If you recall from my combinations video, these were
preferred to be as fine, delicate, and neat as possible, and instructions for running gathering
threads into fabric in Bertha Banner's Household Sewing with Home Dressmaking instruct to take up
two threads while passing over four. That is correct! Two individual threads of the material
are taken onto the needle while four are passed over. Pro tip, do not try to do this by candlelight.
Pardon the lack of pressing going on here, but here's where we are so far. I'm quite happy with
how this waistband is working out and then the rest of the skirt part. So what I have to do now
is I just have to even up this bottom hemline thing so that I can go ahead and put that little
flounce on. I'm just trying to figure out now how high I want that to be. So herein is where we start
to do a little bit of riffing, making stuff up, and just adding floof and decoration and fun bits.
I'm going to cut a little ruffle that will probably be, actually, coincidentally, the length of this
skirt that I have on right now. That will be all silk taffeta, and then I will add that additional
little, what, three inch edging lace to the hem. So it will be ultimately just probably to the tops
of my feet. Obviously you don't want your petticoat to stick out from underneath your dress. However,
I did read in Authentic Victorian Dressmaking Techniques how they specified that evening
gowns should not, absolutely under any circumstances, lift above the feet. So the length
of the gown will be quite long, so I probably will have to go a little bit long with this petticoat
just so that it gives that bottom edge enough floof. Before that happens, though, I haven't
actually finished the yoke edge. So I'm just trimming the seam allowance at the edge where
it's sewn to the skirt. Then, just like the placket, I'm turning under the yoke edge and
felling it down to the skirt with tiny felling stitches. Then I marked an even line all around
the hem at the point I'd pinned up during the fitting and chopped off the excess width.
The hem is then hemmed by machine. Since this edge will be folded under and will effectively
just become the seam allowance when the flounce gets stitched on, I wasn't worried about putting
a fine hand-stitched hem on this, and I'm sure the Victorians wouldn't be so worried about that either.
Okay, so we are now ready to get started on this flounce. I have gone ahead and I have worked out
some math. I need one foot, 12 inches of, well, fabric length plus the additional ruffle bit
at the hem. I have subtracted the bit that's going to be the insertion lace here, which is
four and a half inches wide, which means I need three and five eighths, two three and five eighths
long wide, oh my god, two three and five eighths inch wide strips to go on either side of the
lace, plus an additional inch, so four and five eighths, which I'm actually just going to round
down to four and a half inch strips because I'm going to put two little quarter inch pintucks.
I have done the math and done it again and done it again to make sure that I have accommodated
enough extra width to allow for the pintucks and still have the strips be the correct width when
they are finished. This also means I have probably done it incorrectly. No matter how many times I do
it, it's always incorrect, so I shall keep you updated on that. So basically what I'm going to
be doing now is cutting out times two 175 inch long strips, that's four and three quarter yards,
because what I want the actual hem on the petticoat right now is currently 70 inches all around the
hem, and I want the ruffle, in order to get it to be roughly, to be one and a half times that width,
so I added an additional 70 inches plus 35 inches, which comes to four and three quarter yards. I have
more than four and three quarter yards of this hem lace. I do not, however, have four and three
quarter yards of the insertion lace. I only have about two and three quarters. So what I have done
is I have gone ahead and I have messaged my friends at East Coast Trimming, which by the way,
friends, have acquired all of the Makuba stock. Just so that you know, we can all now rest in
peace. East Coast Trimming, which is, I mean, was tied with Makuba from my favorite trimming shop,
and now, I mean, by default claims that title in and of itself. So in theory, they have all of the
ex-Makuba stock. However, I cannot remember if I just bought the entire bolt of this. I'm pretty
sure that I did, and I'm not sure if they have another colorway. I think they may have had a
slightly more white version of it, which I would accept, but anyway, that's all still to come. I
think I'm just going to go ahead and use this anyway, because they're not in the store every
day. They're only in like maybe once a week, I think. It's probably not going to be in on time
for this video to be released, so what I will do is I will probably just baste an extra little bit
until I can acquire either some more of this lace or something very similar, at least in width,
to replace in the back. At this point, I realized that I was unnecessarily succumbing to mundanity,
which like, don't you hate when that happens? But never fear, for this is a challenge quickly
remedied with any nearby shears of destiny to liven up the cutting experience. And by liven up,
I don't even know, because these are severely not meant to be fabric shears, so cutting silk with
these is not necessarily the most efficient experience, but it can be done, and therefore,
it will be done. So I ended up cutting out these four and a half inch strips from selvedge to
selvedge on the material, so there were no raw edges to worry about. I think the width of my
silk was about 45 inches, but in any case, I ended up connecting three strips per half of the flounce,
so cutting six strips in total and stitching those together into two complete circles containing
three strips each, if that makes sense. Then I'm once again putting machine hems on two sides of
one strip, but only one side of the other. The top edge of the top flounce will again be the
seam allowance of the edge connected to the skirt, and the two edges connecting the insertion lace
will have the lace stitched over them, so the stitching doesn't have to be pretty. The hem edge
at the bottom of the lower flounce, however, will be seen, so I'll want to do that nicely by hand
For the pin tucks, I'm marking the lines all around each flounce. The first one on the upper
flounce, or the flounce with two hems, half an inch up from the bottom, then additional half
inches up from there. The bottom flounce, or the one with only the one single hemmed edge, gets the
marks round from the top edge down, since the tucks will sit on either side closest to the insertion
lace. The bottom flounce, or the one with only the single hemmed edge, gets the marks round from the
top edge down, since the tucks will sit on either side
closest to the insertion lace.
These lines are then pinned together
so that each pair meets, forming two quarter inch folds
sitting just next to each other.
Whilst pinning, I was careful to hold the flounces
in their upright positions so that I can make sure
to stitch with what will become the outward edge
facing upwards on the machine, so it'll look nicer.
And the bobbin side of the stitching,
which sometimes doesn't tend to look as nice,
will be folded underneath the tuck when it's pressed down.
Yeah, there's a surprising amount of math
and geometrical logic involved in petticoat making.
This stuff is kind of no joke.
The tucks are then pressed downwards,
and before I can proceed onto the lace,
I just want to get that final edge
of the lower flounce hemmed off.
I'm doing this, as mentioned previously, by hand.
And if you'll once again recall from the combinations video,
this is done in the opposite direction
from felling stitches in the previous centuries.
That is, with the stitching done towards the body
or from right to left, rather than away from the body.
This seems like a small and unnecessary positional change,
but it actually causes the stitches to slant
in the opposite direction in this century
than they did previously.
So it can actually make
quite a significant aesthetic difference.
While I was originally taught to fell the earlier way,
or away from the body,
I've actually come to adapt to this new way just as easily
and can use both methods interchangeably now.
And now for the pretty bits.
The hem lace is also whipped on by hand.
I've just folded over the upper portion of blank net,
and I'm felling that folded edge into place,
catching only the turned-up edge of the hem on the fabric,
but not puncturing through to the right side.
This extra bit of net is then trimmed up
to the edge of the flounce hem once stitching is complete.
Now it is finally time to unite our two flounce pieces
by stitching the bit of insertion lace between each strip.
This is obviously done by hand
with a tiny running backstitch,
which took approximately four millennia.
So whilst we pass the time,
I shall take this opportunity to tell you about Skillshare,
who have been most wondrously sponsoring
this 1890s gown project.
Skillshare, if you don't already know,
is an online learning community
with thousands of online classes
geared towards creative people,
and has been systematically becoming
most familiar company to me during this time of plague
as I use my time at home to learn stuff.
Most recently, I've been taking Video Essentials,
Using Lenses and Lighting to Convey Emotion by Oren Sofer,
because if you know me,
you know I am hype for learning all of the things
about cinematic storytelling,
i.e. making myself better at
and just generally more excited about my job.
This course covered some of the things,
lighting and lenses,
that I admittedly still don't know a whole lot about,
so it was supremely valuable to me
and I hope in future to you.
If you wish to join me on these learning adventures,
Skillshare is giving away two free months
of premium membership to the first 1,000 people
who click the link in the description box
to help you explore your creativity.
After that, it is only around $10 a month.
So the flounces are now all ready to go.
They are all stitched together.
One thing that I should have done previously
and that I have actually just done
is I've gone through and I've just starched the laces
just with a bit of modern spray starch,
which obviously is not historically accurate.
What I should have done is I should have starched
these strips of lace before I sewed them in,
but as you can see, if we pick this up,
the silk taffeta is much stiffer
and has a lot more body to it than this lace.
So we would have a very strange hanging situation
if we had stiff, crumbly, stiff, crumbly.
So I've just gone through and given the lace
a bit of starch just to hold it out a bit.
As you can also see, I did not have nearly enough lace.
I think I'm about two yards short on this.
So what I've done is I've just temporarily basted
a strip of muslin into this
just to hold everything into place,
but I am praying to the Makuba gods
that this lace still exists somewhere
and that I can actually go and find some more
once lockdown is no longer a thing.
So I'm being optimistic.
This is just going to remain like this until that happens,
which probably won't be in this video
because we're just in lockdown for the foreseeable future.
So the next step, of course, is to go ahead
and to start putting our gathering threads
into the top here so that we can go ahead
and get the flounce onto the bottom of the petticoat.
Okay, I'm going to endeavor to explain this
probably poorly because I cannot get far away enough
probably to actually show you what I'm talking about.
So the ruffle strip flounce thing, oh, it's so pretty.
It's now finished, basically.
And what it is, it's comprised of, as you have seen,
it's three lengths of taffeta lace stitch together.
So there are three in the round, there are three lengths.
I have gone ahead and I have divided them up
into each third into two
so that basically it's divided seam, pin,
and that's the halfway point,
and then seam so that this whole round
is divided into six parts.
I've gone through and I have divided up
the circumference of the hem into six parts.
That way I can get the gathers relatively even on here.
So I will be gathering each of these parts
down into this length,
just in an effort to even out my gathers a little bit.
A thing I failed to explain with the earlier gathering step
is the importance of stroking gathers,
or basically just pulling them straight
and laying each fold nice and even
after scrunching up the fabric.
Once again, the Victorians were sticklers
for neat gathering.
So I am endeavoring to make these gathers
behave as much as possible
as I pin the flounce to the rest of the petticoat.
Now, normally I would stitch these gathers on by hand
for ultimate delicacy,
but we are getting to the point
where we are on a very historically inaccurate deadline
with this project and I can't spare the extra day to do that
so the next best option is to stitch it down by machine.
This didn't turn out as detrimentally as I thought it would,
but I think I still do prefer to stitch gathers on by hand
since you have so much more control
over getting them down evenly
and don't have to worry about the machine foot
accidentally nudging your hard-stroked gathering.
And now for the single worst part of sewing ever,
the incontestable bane of my existence,
the most agonizing punishment
I wouldn't wish upon my worst enemy, closures.
I don't know why I detest sewing in closures so hard,
but okay, confession time,
99% of the things I make pin shut,
one, because I actually like things to be adjustable
and that actually isn't historically inaccurate,
but two, because I severely cannot be bothered
to sew in closures any time ever.
Think you've seen me sew closures into things in the past?
Think again, my friend, the internet is lies
and it only takes two seconds to get a two-second clip
of what it would hypothetically look like
to sew in a closure into a skirt.
Not that I've done that.
But if there is any good time
to practice good respectable behavior,
it is most certainly during a global plague
in which none of us have actually bothered
to get dressed for two months,
so the least we can do is give ourselves
the illusion of respectability
by sewing some hooks and eyes into our petticoats.
Okay, to be fair, at least this thing didn't have sleeves.
Oh, and guess what?
Nearly two months later, friends,
eyelets have finally arrived.
That's right, the eyelets I ordered
to finish off the bust bodice at the start of lockdown,
which means that although my lack of insertion lace
means I can't finish the petticoat during this video,
I can at least finish the bust bodice for you now.
I have a sinking suspicion that this is going
to be the running theme of this project.
Perhaps I'll get the insertion lace
in time to finish that for the gown video,
which in turn I won't be able to finish
because the silk flower suppliers
who I found to make the silk flowers
to go with the shoulders of the gown
is currently also in lockdown.
Hurrah!
Anyway, with the unexpected completion of the bust bodice
and good enough completion of the petticoat,
herein we have the final result.
I weirdly had a lot of fun with this project.
I tend to find Victorian underwear projects
supremely enjoyable in general.
Then again, who doesn't enjoy projects
that include fine, delicate handwork
with pretty lacy materials?
Admittedly, of all the projects I completed last year,
I have to say that the combinations
were probably my favorite.
And while this petticoat didn't take
the entire month and a quarter of work
that those took to complete,
it was still an enjoyable process nonetheless.
I'm so glad I ended up having the bit of extra time
to make this petticoat,
which I'm sure will make a significant difference
in recreating the 1890s skirt shape
I'm after for the final gown.
Had the ball gone ahead as scheduled in May,
I definitely would not have had time to finish this,
so silk taffeta linings to plague-y situations, I guess.
Anyway, stay tuned next month
for the final installment in this series,
in which I shall be constructing the ballgown itself.
Until then, anon, friends.
