Sewing an 1890s Meets 1980s Victorian Shirtwaist Dress

Victorian Threads
4 followers
2 Video Views·Sep 30, 2026
In which I use Rosenbleet's Perfect System of Ladies Garment Cutting to draft a stylistically 1980s shirtwaist dress (sort of based on a Laura Ashley pattern), and investigate true Victorian sewing methods used on extent garments from my archive.
AI Generated·May contain errors
Video Summary
AI GeneratedThe video documents the creation of a white cotton dress that blends Victorian and Edwardian aesthetics. Using a 1911 manual and a repurposed bedsheet, the creator demonstrates the technical process of drafting and sewing a garment featuring voluminous \"gigot\" sleeves, emphasizing a balance between historical accuracy and modern personal style.
For those who need big, nay, huge sleeves and crisp white cotton in their lives, watch on,
for today we begin an exploration of historicism and perception, of romanticism and Hollywood,
of narrative and expression. And it all begins with some very big sleeves.
Statement sleeves have been in for a couple of years now, but there's nothing new about big
sleeves. Sleeves were a way to show off extravagant textiles during the renaissance
and grew to absolutely enormous size before being reined in by sanctuary laws.
Big sleeves of one sort or another were all over 17th century Europe,
took a break for the 18th century, only to reemerge with a vengeance in the 1820s.
Sleeves slowly shrank throughout the mid-19th century and poof, 1890s.
I'd argue that the 1890s brand of gigot sleeve is probably what today's society is most familiar
with, if only because it has been consistently referenced ever since. Whether on screen or in
numerous modern fashion adaptations, the 1970s loved 1890s sleeves, the 1980s, and of course
with the current Victorian obsession, we're seeing yet another renaissance of the big sleeve.
I will be referencing all of the above. Here we have a frankly glorious example of mid-20th
century historicism from the queen of historicism, Laura Ashley. This is obviously based on a late
18th, early 20th century shirtwaist, but obviously it's a dress length, which is something that I want
to do as well. I love the styling here, but I do want to learn to draft an actual shirtwaist.
So I located an Edwardian drafting manual on archive.org from about 1911, I think.
So I'm going to be following the instructions from the manual, but keeping all of this
styling in mind as I draft something that's kind of 1890s meets 1980s. This was conceived as a part
of a bigger project, which had a lot to do with a production that is currently entangled in the
Rider's Strike. So this garment itself can kind of stand alone, but I do want to keep the other
project in mind because this needs to be sort of like an under thing for it. I will link the actual
drafting manual below if anyone out there would like true instructions. I created the basic bodice
shape from the manual, lengthened to mid-calf length. I took out all of the waist shaping.
I referenced the examples at the Met and spread the pattern to include three large tucks at the
front and two at the back. I will absolutely never understand Victorian collar instructions,
so I used the pattern pieces for the collar stand and collar from the Laura Ashley pattern.
By 1911, the sleeve pendulums had swung back to fitted, so I slashed and spread the sleeve cap
to make it nice and poofy. There is something truly iconic about a crisp white button-up shirt.
So I used a huge bed sheet that I'd had kicking around for a bit. This particular bed sheet was
nice and tightly woven, similar to the couple of Victorian shirtwaists I've seen in person.
One of the tucks has a hidden dart inside, so I began construction by sewing this dart
wrong sides together, meaning that the dart was to the outside of the garment.
I sewed the tucks right sides together, putting the ridges of the tucks to the inside of the
and enclosing the dart. I drafted a one-inch center front button placket directly into the
front panels of the dress. I pressed a half-inch seam allowance to the right side of the over
placket, or the side of the placket which will get buttonholes. I then pressed the one-inch
placket to the right side. This brought it awkwardly close to the center-most tuck,
but at least for the moment I ignored that fact. I do not care for modern plastic interfacing,
so instead I used a piece of the self fabric cut to a one-inch strip along the warp and heavily
starched. I slipped this inside the placket and edge-stitched along the fold, and top-stitched
along the edge to keep things crisp. I did the same for the under placket, or the side that
will get buttons, except I pressed the under placket to the wrong side, to keep from having
a placket that is overall too bulky on the right side. I don't have any shirtwaists in my collection,
but I do have several lingerie dresses, which, since they are single-layer construction, I would
imagine use similar construction techniques. Most of the seams are French-seamed, which is great,
except that I naturally decided to include a pocket in the side seam of my dress, which makes
the French-seaming process a bit more complicated. I added additional seam allowance to the pocket
area following my no seam allowance near disaster from my last project, only to realize I didn't
need additional seam allowance, only to realize I needed additional seam allowance on the actual
pocket bag, just not on the side seam of the garment. After re-cutting the pocket bag,
I matched the pocket bag to its place along the front panel's side seam, wrong sides together,
and stitched one-quarter inch from the edge. I trimmed this seam allowance to about one-eighth
inch, leaving the rest of the side seam's seam allowance intact. I then pressed the pocket to
the right side and sewed in another one-quarter inch to create a French seam. I should have now
pressed the French seam towards the pocket bag. Oops. I repeated this for the back. I laid the now
structurally complete front panels against the back panels, wrong sides together, and stitched
the side seams, including the pocket bags, at one-quarter inch. This first pass didn't enclose
all the raw bits from the pocket. I clipped the corners of the pocket bag, trimmed the seam
allowance to one-eighth inch, and flipped the dress inside out to press the side seams right
sides together. I stitched in another quarter inch to create the French seam, which did enclose all
the raw bits this time. Et voila! Nice, clean French-seamed pocket. Only a mild pita. I attached
the shoulder seams with another French seam. I created another interfacing piece for the collar
band, but this time I basted it to the wrong side of the collar band. I placed this against the neck
edge, wrong sides together. Okay, so I just went to try this thing on for the first time and, uh, I did all
these calculations to put a placket on the front and everything, and I realized that I did not
double the placket length in the front. In my mind, like, this somehow worked out because I was like,
oh, like, I'm going to overlap it, and I don't know. I don't know. But anyway, so I only added one inch
and I should have added two. So, like, this closes, like, exactly where it's supposed to on me. It just, like,
butts up against each other, which means that my collar is not really going to work, and also my
button placket is not going to work. And I remember that I already had, like, this weirdness happening
right here with the tuck on one side that, you know, it's, like, super awkwardly close to the button
placket. So I'm taking that out, and that's giving me, like, an extra inch of space. So
I think that's going to fix this. It's going to be kind of funky at the neckline because, like,
it's shaped for the tuck, uh, but I don't know. I'm hoping I can kind of just, like,
work that into the seam allowance somehow. I unpicked the front tucks at center front to
give me back about one inch on both sides. This enables the collar stand to fit perfectly.
Which I promptly stitched in place. I basted another interfacing piece to the wrong side of
the top collar, placed the under collar right sides together with the non-interfaced side of
the top collar, and stitched around all but the neck edge. I flipped the collar right sides out.
For fabric economy's sake, I had a center back seam on the under collar, but it did end up adding
some bulk to the collar. Not world ending or anything, but next time I think I'll just be
fabric uneconomical. I pressed the collar with the outer edges slightly rolled so that the seam
won't sit right along the edge of the collar. I pinned this to the collar band with the under
collar to the right side of the collar band and basted the collar in place. I pressed a half inch
seam allowance to the wrong side of the under collar band and pinned the under collar band
right sides together to the top edge of the collar to sandwich the collar between the top
and under collar bands. I sewed through all layers. Initially I drafted the collar band to
be square like the extant Victorian examples, but I decided to round the center front edges like a
modern men's shirt. I pressed all the rawness to the inside of the collar band and hand stitched
the pre-pressed seam allowance to the inner neck edge. I then went around the collar band with a
top stitch to keep things as flat as possible. The sleeves I drafted were pretty symmetrical,
but best to treat them as a right and a left sleeve from the beginning. I like to pull them
apart and lay them as a reflected pair first thing. I then folded each in half and pinned
the long seam leaving four inches free at the wrist. I sewed these with a French seam.
While I was at it, I stitched two lines of gathering threads along the sleeve cap at about
one eighth inch and one quarter inch. I don't see any contrasting cuff plackets on the Victorian
examples, so I used this as my excuse to do a simple bias binding placket, which is my preference
anyway. I lined up an unfolded piece of half inch double folded bias binding against the cuff slit
right sides together. I stitched this along the binding fold, holding the cuff slit open to a
straight line. I then folded the binding around the raw edge and hand cranked a stitch in the
ditch along the seam to catch the inside fold of the binding. I stitched a couple of stitches along
the diagonal of the corner of the binding to help the whole thing sit flat. By the way, if you are
wondering why I've been hand cranking so many things lately, it is because this is my industrial
machine and I love her and she's beautiful and her mechanisms work so nicely and reliably. Very
privileged to have her, but she has a clutch motor, which means that she has two speeds. She's either
stopped or she's going 50 plus miles an hour and there's like a little speed adjustment thing in it,
but it doesn't really do much, which is great if you are in an industrial setting and you're just
sewing straight seams all day, which is what she's made for, then it's wonderful, but not so great if
you are doing detailed work, which is what I tend to do. I've been doing some research lately and I
think I'm going to replace her clutch motor with a servo motor, which is a little bit less powerful,
but has a speed dial on it and is much quieter. I actually already have the servo motor, so I'm
definitely going to replace her motor. I was thinking that maybe because it's going to take
me a while to release the rest of the videos for this project, that I may insert like a little
workroom vlog upgrade video, just because there's a few different changes around here that I kind of
want to make. And also I've never really shown off my workroom space, so may as well do do both in
one video. Kind of selfish, I want the reliability and beautiful mechanics of an industrial machine,
but the control of a domestic, so we'll see if I can make that happen. My cuffs were just
rectangles the length of the cuff edge and three and a half inches tall. I basted interfacing to
the outer cuff piece, placed the under cuff to the right non-interfaced side of the top cuff,
and sewed along the two short sides and one long edge.
I trimmed the excess seam allowance from the corners to make them nice and crisp and pointy.
I placed the top cuff along the cuff edge of the sleeve, right sides together,
and sewed. Doing this is kind of awkward. You have to hold the under cuff outwards to get
right to the edge, since you're basically sewing the whole thing from inside the cuff.
I pressed the seam allowance to the inside of the cuff. I stitched the under cuff to the inside of
the cuff edge by hand. Now on to the main point of the whole look. I pulled my gathering threads
to gather the floofy sleeve cap. I placed the right side out sleeve into the inside out body
so that the right sides were together. When I drafted the sleeve, I included notches where
the gathering should begin and end, with accompanying notches on the arm side. So I matched up the notches
to the underarm of the body, right sides together. I fiddled with the gathering until the cap fit
evenly into the armhole, and the gathers at least had the appearance of being even. I prefer to stitch
gathered sleeves with the gathers on top, so that I can really control how the gathers are stitched
down. So the time has come to finish the armhole seam in the dress, and this is always a question
even in modern sewing. How do I finish this seam? I usually do it with a flat felled seam or a binding
depending on what the ease of the sleeve situation is, but I actually have two interesting examples
here. Oh, by the way, yeah, this is a clean table, but I have a skin condition that's flaring up at
the moment, so I'm using a nitrile glove when looking at these. So I have two interesting
examples from the Victorian period just to kind of see how the Victorians would have done it.
Most of the examples, by the way, are just left raw, which is, I guess, an option if you have a
I think that mine would fray a little bit too much. So this one actually has like a very
loose buttonhole around it. Well, in some places it's like a buttonhole, and in some places it's
just whipped around, so there's an option, I guess. This example I thought was really interesting
because this is actually serged. Interesting, right? I think that we always forget that the
serger or marrow machine was invented in the mid-19th century, so Victorians had access to
sergers, and they definitely used them. So serging for this would be a historically correct option.
I personally don't care for serged seams that much, so I'm not going to do that. But I think
I am going to see if I can do like a little buttonhole stitch. I mean, I can always go over
it later on with the binding if it doesn't work out or if it ends up fraying. So I think I'm going
to try this out and just see if that works for mine. I trimmed the seam allowance to about one
quarter inch and sewed a tight blanket stitch over the raw edge using a double strand of buttonhole
twist thread. As of right now, this is still how the arms are finished, but 100% I will be binding
these sleeves in the near future. My existential crisis for this project is coming in the form of
hem length, because I cut this quite long, but now that I'm looking at it in the mirror, it's
a little too long. It's looking very, uh, frumpy, I guess is the nicest word that I can come up with
to describe it. So I don't know, I've played around at this point with probably 15 different
hem lengths. So here she is right now, and she is actually looking very cute. Now that I'm looking
at her through the phone, through the mirror, I'm seeing the whole thing in a different perspective,
and it's actually looking quite nice. I tried a higher length, like, just above the knee.
It kind of felt very, like, free people. I'm having this crisis right now because I'm like,
does the longer length look cute and sophisticated and bring it to a different place,
or does it just make it look like a tent? It's looking very much like a lab coat at the moment,
but I think that that's just because I have something under it, and you can see it,
so it's just reading coat. But now that I'm looking at it from this perspective, I think
this length is actually great, and so I'm going to chop it off to this length and give her a nice
hem, and that will be this part of the ensemble and project. I accordingly chopped off the bottom
three and a half inches. Of course, I wanted a nice wide hem, but my usual deep hem facing would
have really made this look like a bed sheet. Instead, I sewed a two-inch strip of bias tape
to the hem edge, right sides together. I pressed this to the wrong side to enclose the raw hem
edge, with a tiny lip of self to the inside to keep the edge seam from showing to the right side
of the hem. I had pre-pressed a quarter-inch seam allowance to the wrong side of the bias tape,
so I re-pressed this and pinned it in place. I sewed along the folded edge. I tucked in the
edges and again hand-cranked the ends to keep them nice and neat. Hand-sewn buttonholes are
on my skill wish list. Until I can get that skill down with some degree of confidence,
it's machine-sewn buttonholes on my little domestic. These were sewn on the top placket
at about one and a quarter inches apart. The buttonhole at the collar band is horizontal,
which gives the neckband a tiny amount of ease, and the rest of the center front
buttonholes are vertical, which helps them sit flat. I also put two horizontal buttonholes on
each cuff. I really want to learn how to do hand buttonholes, these were pretty rough.
Poor things. I used pearlized four-hole buttons, which were the closest thing to the Victorian
versions I could source locally. I attached them by hand using four-plied buttonhole twist thread.
Fun story, one of my first jobs in fashion was at a bespoke tailor shop on Manhattan's
Lower East Side. And one of my main jobs, besides shuttling fabric and patterns around the Fye
Borough area, was sewing buttons. I've sewed a lot of buttons. Perhaps the Victorians,
like the designers of the mid-20th century, were looking back, trying to recapture an imagined
pre-industrialized simplicity of life. I mean, they definitely were, but maybe the Gigo sleeves
of the 1890s and 1970s and 80s were a direct reference. Maybe fashion is always flowing
towards and away from the body like the tide from the shore, and the departure and renewal of huge
sleeves is equally inevitable. I can say with confidence that I found it highly soothing to
step away from microtrends and focus on clothes that have proven to stand the test of time.
The rest of this project will trickle out eventually, but in the meantime I've got
another couple of projects in the works, including the promised workroom upgrade.
If you enjoyed this video, I always appreciate a thumbs up,
and hit subscribe if you'd like to come along on further explorations of timeless fashion. Bye!
