welcome to my three-bedroom workshop and
I bet you probably haven't heard that
before I am in a very unique situation
and my day job is maintenance at an
apartment complex and this particular
apartment uh was a trashed storage room
when I took the job I cleaned it all out
put my tools in it and have been very
thankful to call it my shop ever since
so like I said it is a three-bedroom
apartment but the main work area is 11
ft this way and 22 ft this way so it's
pretty much the size of a single car
garage so the front door is here and I'm
going to work my way counterclockwise
around the shop this area is normally
empty it is my assembly slash staging
slash big project area I seem to do a
lot of big projects I made a uh
full-size loft bed sitting here and just
before that I made six twin over twin
bunk beds so I like to have a big open
space if possible and I've got some very
inexpensive Lumber racks here I just
made these a couple weeks ago and I
should have done it a long time ago I
really like this system it's quick and
it's easy and you can put it anywhere
that has a 2x4 stud in your wall so I'm
definitely going to be making some more
of these and throughout my entire shop
uh I think you can see that one there's
these Bell lights uh it's I I don't have
that many windows in here and I'm
actually covering two up right here uh
because of nosy neighbors um but I don't
have that much lighting so some not much
natural lighting so I've got a bunch of
these lights scatter throughout on the
same wall as my lumber rack I have what
used to be some type of uh little French
cleat system that I had uh this wall has
gone through so many changes and it's
going to change again I had some
cabinets up there and I cannot stand
cabinets in a workshop uh I prefer
drawers rather than doors but I'll get
into that later uh so this is all going
to be a French cleat system here soon
and hopefully some better storage I got
all my band saww blade just stacked
right here so uh big plans for that I
guess and this is nothing more than a
kitchen sink based cabinet that I found
and put some OSB on the top for a work
surface put some
2x4s and wheels on the bottom the
casters on the bottom to make it mobile
and this is actually 1/ qu inch lower
than my table saw so it's a good out
feed support when needed and I also made
my miter saw about the same height so it
as a support for the miter saw that's
adjustable really because I can get 16
ft of material in here I don't know why
I would but I can so whatever length
that I need I can just push the cabinet
wherever I need it and I have a good
amount of out feed support without
building a dedicated stand that has to
be in there for the miter saw so
Mobility is very cool this is my Cobalt
10-in sliding compound miter saw uh
sliding miter saws are one of those
tools that seem to be very sought after
by a lot of people but in my opinion are
the number one overrated tool in any
Workshop I've never used the compound
function on this spider saw at all I
barely use the sliding feature I I I
would prefer to use my table saw for
everything that this thing can do other
than rough cutting to length I do a lot
of rough cutting with this thing or just
cutting 2x4s but you can use that or you
can use any miter saw for cutting 2x4s
really so in my opinion very overrated
for the price of a decent sliding miter
saw you can get a decent table saw so I
would much rather go with a table saw uh
my outfeed support here this is a byold
door uh just some piece of trash door
and I've screwed a uh 40in ruler to this
it's upside down and going the opposite
direction and it starts at 20 in so
I've got a little adjustment block here
that I can slide and just add 20 in to
it so if you need a 40in cut just put it
on 20 uh took a little while to get used
to but it's very handy to have and I
spent $2 on this little uh ruler so very
cheap the miter saw is actually sitting
in a cabinet and the reason being is
this thing slides so far that you need a
lot of room for the arm and having it in
some wasted space closet uh is actually
very beneficial that way I'm not
sticking it halfway out into the room uh
if it was someplace else so this worked
out pretty good uh I've got a little
cardboard box shroud here and a dust
Port back there and I've got dust
collection ran through here a blast gate
and then a remote switch for the dust
collector right here so it does a very
good job at getting these small dust out
of the air uh not so much at actually
extracting all the sawdust so every now
and then you got to brush it in there
but it works again these are just some
recycled
cabinets and like I said I cannot stand
cabinets because I only use the front
five or 6 Ines and the rest is just
wasted space and if it's not wasted
space then you got to move everything in
the front to get to the back stuff so if
I was designing all this stuff all over
again I would avoid doors and cabinets
uh like the plague I I like drawers a
whole lot better but anyway two uh 30-in
cabinets here junk storage the dust
collection continues from the miter saw
over to this corner I've got a 90° elbow
a blast gate and a pipe that goes right
to the floor for a floor sweep when
you're ready to clean up you just sweep
the whole floor into that corner suck up
all the dust you don't even have to bend
over and use a dust pan I really really
really recommend that if you're going to
put dust collection in your shop put
some type of floor sweep in there that
is just very very convenient this is my
13-in drill press 3/4 qu horsepower uh
benchtop model it's a very big for a
benchtop model I just got it the other
day from Harbor Freight uh haven't even
plugged it in yet but it's a drill press
and I suppose it just drills holes so
it's sitting on a little cabinet that I
salvaged and put some wheels on the
bottom of I got all my uh air guns in
here my Brad guns and both my electric
Sanders in the bottom um it's a very
crappy stand and it wobbles a lot so I
just set this up here yesterday or the
day before and I'm going to make a new
one but for the time being that's what
it is uh these particular nightstands
and small little tables uh just particle
board crappy design imported stuff
you'll see a lot of these in dumpsters
or next to dumpsters I do locally anyway
and I Salvage all these drawer slides
off of them so uh free drawer slide
versus one that you can buy in a store
um I'm going to salvage the free ones
you can do whatever you want but that's
what I do this is another mobile cart
that I've made uh horrible design the
wheels are in the inside of this thing
so it's very topheavy it likes to tip
over a lot but anyway I use it for
moving stuff back and forth throughout
the shop whatever project I'm working on
and all of my sanding supplies I've
always just stuck them on the top there
I'm not worried about dust it's
sandpaper or whatnot but I really want
to make some type of sanding station
type of storage where I can put all my
sandpaper and and all my Sanders in one
location but in the meantime this what
it is uh again a lot of Salvage
materials this is actually a piece of uh
laminated cabinet door so I've got a lot
of these lay around as well dry rice
board is something else I highly
recommend in any shop if you're anything
like me you can measure something over
here walk over there and completely
forget whatever it is that you measured
so write it down and you can see it from
anywhere moving along we are now in the
kitchen of the shop and this is a two
horsepower Harbor Freight dust collector
that I modified into a theme baffle type
setup uh I don't think it's full to
horsepower but this thing is pretty darn
strong it it does everything that I want
it to do and any hobbyist woodworker out
there this will probably uh fill all of
your dust collection needs if you want
to go buy one but uh this whole setup
here this is a this is the metal ring
that came with it normally you have the
filtered bag above it and the clear bag
below it I made a theme baffle setup for
it to sit on and it sits on a metal
trash can to collect most of the chips
that way I can just lift it up take the
can out and dump the can put it back in
and it is the blower assembly is sitting
right on top of the theme baffle and it
exhausts the fine dust out so I'm not
worried about negative pressure in here
uh I don't want any uh flamed type
heating devices so this works out really
well for me it's pretty dark over here
so sorry about that but anyway the
kitchen set up uh this is nothing but
storage space I've got a lot of these
little Hardware bins that I want to make
some type of uh angled storage rack for
them uh my belt sander platform I need
to find a place for it and like I said
all of this cabinet storage that would
be wonderful if I could actually utilize
it a little bit better uh but like right
here I've got all of my spray paints
that are five or six Rose deep and I
have absolutely no clue what I have
because you can't really get to it so uh
I like I said hate doors and cabinets I
would much rather put things in drawers
or if I was to build cabinets a lot more
shallow cabinets that way you can have
the front door open up as well and have
storage in it but uh you work with what
you have and this is kind of what was
given to me so this side is nothing but
tool storage all my drills battery packs
Chargers circular solid drill bits all
that good stuff is over here I want to
move the drills and battery packs and
Chargers into a charging station of some
kind over there all my drill bits I want
to put with the drill press eventually
and free up this space for I don't know
some other junk to put here uh cabinet
storage and you guys already know how I
feel about cabin cabinet storage um a
g0555 lnv Grizzly Banda I'm not a tool
guy by any means means but I absolutely
love that thing that is pretty darn cool
um like I said I'm not a tool guy uh one
of the best quot someone ever told me
and I say it a lot is uh it's not the
arrow it's the Indian so a lot of what
you make or everything that you make
comes from up here not from tools so
keep that in mind you don't necessarily
have to have uh really nice fancy tools
to make some stuff but that being said I
love that tool coming from the kitchen
we're going to go down this hallway but
first I have another dust collection
switch over here that means I've got two
switches one on either side of the shop
uh pretty convenient no matter what
you're doing um I got to figure out some
type of table saw stor table saw blade
storage as well as my band saw blade
storage my clamp rack over here it works
great it's just a piece of wood screw to
the wall it's actually two pieces of
wood screw to the wall um but it's an
absolute horrible location no matter
what you do you're going to walk down
this hallway and you're going to hit one
of these and they're going to fall off
and uh these heavier the bigger pieces
uh they kind of hurt when they fall on
your toes so that's going to be moved
I'm using this hallway for my planer uh
this is a DW 735 DeWalt planer uh I
splurged when I bought this it's way
overkill for what I need uh I did not
have the dust collection when I bought
it so that's one of the reasons why I
bought it because it has a fan that is
included um I probably would have been
just as well off if not better to buy a
lesser expensive model that did not have
a fan attachment and I could probably
save the money uh that was use the money
that was saved from this to buy a you
know my drill press or something but uh
it's a very good planer but like I said
way more planer than what I need uh it's
sitting on an old dresser that I
salvaged yay drawers no doors um what
miscellaneous storage in here and I've
got a piece of melamine shelving that is
ran to this whole thing and it's 6 feet
to act as an infeed and outfeed support
and about I don't know I guess 16 in or
so from the front and back I've got
another support and these supports are
about eighth of an inch higher than the
bed of the table and that means that it
it ramps up on the outfeed slightly and
it ramps up on the infeed just slightly
um it reduces snipe a little bit from
what the original setup uh but more
importantly it X it puts a little bit
more pressure against the wheels the
rollers so your uh pieces never slip as
they roll through which some people have
had problems with this particular unit I
put these shelving brackets in to act as
Lumber storage if I'm feeding some long
stuff through on the out feed I can pick
it up and set it up here um but that
never happens I store my table saw uh
tapering jig and my router table fence
up here I never use it for what it was
intended to to be used for and again
crappy cabinet storage up here that is
just wasted space and unfortunately it's
a solid cabinet that's very heavy that I
have to take down soon so that's not
going to be fun but it's coming down and
I want to do the same Lumber rack that I
did in there right here so I have some
dedicated Lumber storage that's out of
the way and won't ever be disturbed kind
of thing uh back here I can't really
show you the actual three bedrooms of
the the shop here because I don't have
electricity in half this apartment uh
but the bathroom is empty I use it for
my camera hardware and stuff like that
it's low dust area uh this back bedroom
all the way at the end if you go around
the corner and in the closet is my
oiless air compressor it's a 5 gon 20
horse air compressor it's loud so I much
appreciate it being way back there and
these other two rooms are just storage
for my day job so from the clamp rack we
come to what everyone else has been
calling my jig wall uh I guess that's
true it's a wall with jigs on it and my
front door where we started so uh real
quick this is a compound angle cutter
for say like a square leg for a bar
stool put your Square leg in here it's
just 45° sled and you run it through
your table saw with the blade tilted on
your table saw and you make compound
angled cuts on the bottom of legs a
tenoning jig that I've used for one
particular job I had several hundred
tenants to to cut so I set it up for
this one particular process never used
it since should just throw it away but
it still still sits up there push stick
pattern Bread Box template I used to
make a lot of these bread boxes um just
a full-size template and a miter sled
for my table saw that's a very cool tool
to make a couple little hold down jigs
temp uh tapering jigs or jointing jigs
whatever you want to call them little
templates circular
saw um zero clearance circular saw
tsquare and a sled back over here you
can't see it but this is my Craig jig
setup that I normally use and just about
every project that I make it seems like
and of course my saw horses these things
get used a lot um they've taken a lot of
abuse and they've held up just fine um
very handy to have in the middle of my
shop in no particular location is my
mobile table saw station this is a
porter cable PCB 270 TS table saw um
it's a decent saw it does the job just
fine in this Wing over here I have a
dual router table set up uh I've got two
routers in here two two horsepower
routers each on Independent lifts of one
another uh I used a homemade lift plan I
got a plan from ibuildit.ca John Heights
uh router lift really cool design works
just fine no problems out of it and
they're on Independent controls of one
another the stand itself is a 2x4 half
2x4 half flap joint construction
skeleton basically with a platform on
the top and in the middle I have a
horizontal pipe that that runs out over
here hooks up to dust collection have
blast Gates on either on both sides that
way I have independent dust collection
for the table saw and the routers as
well this side is just a uh from mic
wing and I used really crappy casters on
this thing so if you want something to
roll really well in your shop get some
decent casters uh I initially wanted
this thing to roll really well but it
doesn't these these casters are crap and
it actually works out better in the long
run because I can just move it wherever
I want to with a little bit of body
weight and then just cut without locking
it down so it worked out in the long run
well thanks for checking out my shop
checking out my tools my space and all
that good stuff uh 2013 has really been
a very interesting year for me and I
really appreciate all of your support
throughout the year uh December 8th a
couple weeks ago marked one year of me
uploading videos to YouTube and I just
want to say thank you thank you for all
your support thank you for your
continued support of free woodworking
content uh I'm really looking forward to
2014 uh having a lot of fun as things go
on so anyway thanks for watching guys
thanks for continued support and you
guys have a great day