This is what I do for a living so if you would like to show your support without spending a dime please watch, comment, or share anything on my website. Viewing everything from my website goes a long way in helping support what I do. Thanks! http://www.jayscustomcreations.com
It's been about a year and six months since I did my last shop tour video, and since then
a lot has changed.
I was actually in my last shop when I shot that video.
I've been in this space for a solid year now, from July 2nd of 2014, and it's now the beginning
of July in 2015.
Now there's a couple things I said in that last shop tour video I want to talk about
real quick.
The first one is that I'm not really a tool guy, and you can pretty much throw that out
the window.
I have upgraded a lot of my tools since then, and it is what it is.
You can get a lot of really awesome projects done with inexpensive tools, and buying more
quality tools may or may not increase the enjoyment of the process, and that's a decision
that you need to make.
I'm not telling you you need to upgrade anything or what tools you need to buy, so for whatever
that's worth.
And the second thing I said in that video was, which relates to the first thing, is
it's not the Aero, it's the Indian.
Tools are just tools.
They're just going to sit there unless you tell them what to do, so whether you do have
nice tools or whether you have inexpensive tools, it really doesn't matter too much.
You can still accomplish really awesome things, so whatever that's worth, don't let that discourage
you.
So on July 2nd, 2014, my wife and I got our first house together with the intentions of
the house is pretty much hers.
She can do whatever she wants with the house as long as I get the garage.
So as far as I'm concerned, this is not a garage.
This is a shop, but it's really just a garage.
It's a two-car garage.
It's about 22 feet left and right, and about 22 feet front to back.
I've measured it a couple times, but I always forget the exact measurement.
Anyway, that's pretty much the basic size of what it is, and when I first got this space,
I did a couple things to prepare for it.
I painted all of the walls a nice, fresh coat of white.
It was already white, but it was a dingy, dirty, beat-up white, and looking through
the front of the garage, the large front door, along the left and back wall, I built a box
for electrical.
So I ran new electrical lines specifically for the shop that were not inside the wall
studs of the actual garage.
This allows me to change and modify things as needed going down the road with the shop.
I've never had to get inside these boxes, but honestly, if I was to do it all over again,
I probably should have just ran conduit and been done with it.
So for whatever that's worth.
Everything in my shop is on casters.
Everything is mobile, and the reason being is this allows me to completely move everything
to one side if I'm working on something larger, and it also allows me to completely change
the layout of the shop as my needs and wants change here in the shop.
So I'm going to start in the very middle with my table saw and my assembly slash work table.
My table saw is a SawStop PCS table saw with the industrial mobile base, and I really,
really, really, really like the mobile base on this because it allows me to very, very
easily completely change the location of this table saw.
So if I know if I'm not going to use it for a while and I need the space, I can just pick
it up really fast and push it up against the wall.
This mobile base is, it's ridiculously easy to move.
So having the heaviest tool in my shop be able to move pretty much the easiest is very
convenient.
And I've also spray painted a couple spots on the floor where the extension wing supports
reside in their almost permanent location.
So if I'm going to set this up for a normal task or whatever, or in its normal location
in the shop, this gives me a nice little spot, a reference point, so I always know I'm going
to put the table saw back in its familiar location.
The dust collection is hooked up to the back side of the cabinet with a couple pieces of
flexible hose and some four inch PVC pipe.
This is all a slip fit connection.
None of these joints are glued and it all just kind of fits and moves and changes as
it needs to change.
So it's very easy to just unplug this and get it out of the way and hook it up when
I need it.
And the fact that it's not a hard connection, I don't think really affects the performance
of it any at all.
If you had a permanent setup for your table saw, then it probably would be a better idea
to make the dust collection permanent to it.
Right next to the dust collection pipe, I always have a couple of cords on the floor.
The cord for the table saw and an extension cord that I keep near the entrance of the
garage.
And it's one of those things, you know it's there so you pick up your feet when you walk.
It's not really a trip hazard if you know it's there.
It's kind of the same concept of your front porch.
You know you have to pick up your feet to get in the door, so you pick up your feet.
Right behind my table saw is a 4 foot by 8 foot, slightly modified version of the Polk
workbench.
It's Ron Polk's original, somewhat designed, that I modified to have here in my shop.
And it's a full 4 feet by 8 feet work surface, which is the first time, I built this like
5 or 6 weeks ago, and it's the first time that I've had a full 4 by 8 work surface here
in my shop, and the increased space that I have from this compared to my last assembly
table or work table, whatever you want to call it, has just been very convenient.
I've got it piled full of crap right now.
These are some 2 by 10s for an upcoming project that I need to move.
But this whole table has these openings below for the tools as you're working on a project.
This isn't really tool storage, long term tool storage, but if you're working on a project
and you're using your nail gun or your drill or your driver, it's very convenient to, as
soon as you're done with that particular task, just set them under here and work on something
else and it's convenient to the project that you're working on, whatever tools that you
may be using.
And this whole table is on casters so it can be rolled anywhere in the shop to free up
space as needed.
I have one of these power strips down here that is plugged in with an extension cord
on this side so any type of power tools like a sander or something like that I can just
plug in and I never have to search for a certain extension cord or never have to worry about
the extension cord getting in my way because the main line is plugged in over here in a
very low traffic area.
Below that is a shelf that I have my X-Carve CNC machine on, and the original intention
for this was to have a spot to store the X-Carve and then pull out and put on top as needed,
but there's enough space down there that I can just leave it down there, plug it in,
and cut as it sits down there, which is what I've been doing so far.
As I said, everything in the shop is mobile so you can move it out of the way as needed,
and I wanted to show you the center two items first, that way I can push them off to one
side as I'm showing you guys the other side of the shop.
So to start along the perimeter, I'm going to go right behind the camera and show you
the first corner as you come through the large garage door on your right-hand side.
Immediately on this wall is my rolling plywood cart, and I just made this and it's working
out really well for me.
It's very easy to roll around, and I can roll it outside to unload plywood onto the cart
directly from my truck, and I can also roll it right behind the table saw to make, to
ease the process of putting the table, or putting the plywood onto the table so I don't
have to pick it up and carry it all the way around to the back side.
So it's working out really well, and it stores all the sheet goods on the back side of the
cart.
Up next is my universal clamp rack, and I made this so that it has a universal holder
design so that this one particular shape that I cut in all the slots will fit or accommodate
every single one of the clamps that I have.
And this has turned out to be very handy.
It's very convenient to just walk to one place where you know all your clamps are going to
be.
So I'm very happy that I made both of these, too, and they were actually, I think, the
last two projects that I made here in the shop.
After the clamp rack is my finishing supply rack, and this I've outgrown.
The concept is to have shorter shelves down here for these quart-size finishing supplies,
and also to have angled shelves up here that fit spray paint and anything that resembles
spray paint like glue bottles.
But like I said, I've pretty much outgrown it, and I've started to store some of this
stuff inside my locking metal cabinet.
So I may make this thing taller at a later date, but I've already made one of these on
a video, so I'm not going to record it or anything like that.
This is my welder.
I've made one welding project on this channel, and I've used it three or four times since
then, but didn't record it.
Just household stuff here and there.
It's very handy to have a welder around the house for repairs and stuff of that nature.
That's mainly the reason why I got it, and hopefully I'll get into some more metal projects
in the future.
This is the door that goes into the house, and this is my locking metal cabinet that
I got about four or five years ago from a company that was going out of business.
They said you can just have it, so you can't beat free.
That was a great deal.
I don't have a key to lock it, but it does lock.
And also, this is pretty much a community cabinet, I guess you could say.
Like six months ago on my vlog channel, I asked if anybody had any stickers for their
business that I could purchase, and since then I've only purchased I think like six
of the stickers that are on here.
The rest of the stuff has just been sent to me by all of you out there.
This is a community collage, I guess.
It grows every week, and it's very awesome.
I very much appreciate all those who have already sent me a sticker.
What's inside it is pretty much a bunch of paint and some other chemicals and stuff like
that.
It's not really organized at all, but it's very handy to have here in the shop.
This wall, I have some of my table saw attachments, a rolling toolbox for more mechanics style
tools, ratchets and wrenches and stuff like that.
And then also a dry erase board that I made for my wife several years ago that we never
ended up using in the house, so I confiscated it for in the shop.
And that was about two years ago that I put it in the shop, and the first day I wrote
a clean shop is a safe shop, and haven't erased it since.
That was something that my seventh or eighth grade shop teacher once said, and it's kind
of just stuck with me.
And I really like having a nice, clean, and organized shop, so before I make any project,
the very first step for that particular project is always to clean the shop.
It's very inviting and encouraging to work in a clean and organized space.
Taking up 14 1⁄2 feet on the back wall starting in the left corner is my miter saw station,
and this is one of those projects that I should have done, or I wish I would have done, when
I first started this shop.
The increase in storage, organization, and ease of use on the miter saw setup has just
been tremendous.
I absolutely love this thing, and it's just awesome.
So we got 20 drawers that are on full extension slides, and they are all 24 inches deep, and
then I've got one tray that is on 26 inch slides for my benchtop planer that I really
don't use that often.
It just keeps it out of the way.
Now up here on the top, I've got cubby holes or bins, whatever you want to call them, for
stuff that is commonly used, like my hand tool assortment, and then stuff that really
doesn't need to be protected by the dust, like my old drill press table and belt sander
platform thing.
So above that is just miscellaneous storage that I've never really organized, but it really
doesn't matter, where my ladder is and some other jigs and stuff like that.
Above the miter saw station along the entire length of the wall, minus the area needed
to get into the attic above here, is a set of shelves, what I'm calling wasted space
garage shelves, and it's just a place to store household items that I don't want taking
up space here in my shop.
Also some other boxes and stuff that I use for shipping occasionally.
Just random crap.
Tucked into the lower left hand corner of the miter saw station, out of the way, is
my air compressor.
It's a 5 horse, 20 gallon air compressor.
It's an oil-less air compressor, so it's loud and obnoxious.
I don't have any desire to enclose it in some type of sound containment area or put it outside
because I really don't use it that often.
And I have the air hose line for it run along this back wall to the front corner of the
garage door.
On the ceiling I have four 8 foot light fixtures, and each one of those fixtures has four 4
foot T8 6500K fluorescent bulbs.
So this gives me a total of 16 bulbs in the ceiling, and I wish I would have put two more
8 foot fixtures above the garage door on a separate switch.
That way I can turn them on when the garage door is shut, because when the garage door
is shut it gets kind of dark in that corner on camera.
But that's something I can do at any other time.
I live in central Mississippi where the summers are very warm and extremely humid, and I don't
have air conditioning here in the shop.
I don't want to go through the hassle of putting insulation in the walls, and I just don't
think that the investment is greater than the reward for making this shop insulated
and air conditioned.
So what I do have is a simple box fan, and I just run the fan anytime I'm not concerned
with the audio on the videos, which is like when I'm running a table saw or running any
other tool or just doing a miscellaneous task, then I'll run the fan.
But if I'm talking then the fan gets turned off because having that in the background
is extremely annoying.
And that also pretty much always stays in this corner where I store my vertical tools
basically on this wall.
And like I said, I live in Mississippi, but I do have a lot of Detroit's sports gear around
here, and that's because I grew up in Livonia, Michigan.
It's just west of Detroit, and I moved away when I was 14 or 15 years old.
So I grew up as a big, big Red Wings fan and a fan of the really crappy Detroit Lions in
the late 90s.
But I never really was a fan of baseball, so that's probably why you don't see a Detroit
Tigers flag around here.
And then this is where I store my vertical tools that are also on wheels I can move out
as needed.
This is my Cyclone and ShopVac cart, and it's extremely handy.
It's been very nice to have all of this stuff located in one little spot that is easy to
just grab and move around.
So on the front side, like I said, is my ShopVac and Cyclone.
They're all hooked up together, and I have all of my attachments and tools on this backside,
the different hoses that I have, and the attachment wands to go with it.
So this is very nice to just roll to where you're working and attach it right to a random
orbital sander or whatever you want, and roll out of the way when it's not needed.
The cord on the ShopVac is long enough to where it pretty much stays plugged in at all
times, and I can reach just about everywhere here in the shop.
And for cleaning up areas of the floor very quickly, I can also use this as a vacuum to
just suck up the crap on the floor.
So this has been very handy to have.
This is a 13-inch benchtop drill press, and it's sitting on a nightstand that I found
in the trash and put some computer chair casters on the bottom of it.
And these casters actually ride really, really easily, and they've held up really well.
I've done this, I put this whole setup together almost two years ago, and it's working out
just fine.
And because this is a nightstand down here at the bottom, I've got two drawers for storage,
which are just piled full of miscellaneous drill bits and crap that have no organization
to them, and I barely ever use the drawers anyway.
Behind the drill press and bandsaw, I have a little shelf for items that are used at
the drill press and bandsaw.
So I've got my fast cap drill bit set over here, and then some other stuff for the bandsaw,
like some push blocks and stuff like that.
This ends up collecting crap more than anything else, so I don't know if I'll ever do anything
with this space, but it's not really optimized or organized that well.
My bandsaw is a Grizzly G0555LANB.
It's their 30th anniversary edition bandsaw, 14-inch bandsaw.
It's been a really solid performer.
I have zero complaints with this, other than the dust collection.
Dust collection really sucks on this thing, and that's not a deal-breaker for me.
Most of the time, honestly, if I'm just making one or two little cuts here and there, I don't
even turn the dust collection on.
So as you can see, it pretty much stays in this state of dustiness.
Next up from the bandsaw is my lumber rack and small pieces storage dresser.
This is a dresser that I found in the trash several years ago and have used it for various
different uses.
It was a miter saw station at one point, planer stand slash station in two different setups
at one point.
It was a workbench top at one point, and now I'm just using it to store smaller offcuts
until I get rid of it.
Like for instance, this drawer is a small piece plywood storage for pieces that are
smaller, too small to fit on the plywood cart, and then these other drawers are for pieces
of lumber that are too short to fit on the lumber rack.
And if these drawers are full and something belongs in it, and I don't have any space
for it, then it gets thrown away or just put in the burn pile for my backyard fire
pit.
Above that is my lumber rack, and this is just pieces of conduit stuck in two by fours.
It's super simple, and it's been doing the job just fine.
Like I said, I've had this trash dresser for a long time, but if I ever decide to get a
jointer, then this is the location in which it will be.
And at that point, the dresser will probably end up going back into the trash or broken
down and the parts used for something else.
But this spot is pretty much the best location for a jointer in my shop if I ever do decide
to get one.
Finally on this wall is my dust collector.
This is a mobile unit from Grizzly, a cyclone unit with a canister filter in it.
And it was more of a splurge purchase than anything.
I already had a dust collector.
It was a modified Harbor Freight dust collector, which is a very great buy, by the way.
But the way I had that set up in my last shop was that it exhausted the finer particles
outside.
And when I moved to this shop, I really did not want to cut any holes in the wall just
for a dust collection vent outside, and I didn't want to go through the hassle of modifying
the unit again to add a better filtration system to it with a canister filter and a
better separator like a cyclone.
It has a thin baffle kind of thing that I made for it that really, really wasn't that
effective for the smaller particles.
So I didn't want to modify it at all, and I just got this.
And it's worked out really, really well.
This is rated at less power performance.
But I don't have anything to measure the actual CFM, the suction.
But just visually, you know, touching the end of the hose, this thing has a lot more
suction than what my Harbor Freight unit had.
That being said, the Harbor Freight unit performed just as good as my intentions or my needs.
I just couldn't exhaust it here in this particular shop.
So I upgraded to this.
Also, all of the dust collection piping in this shop is just four-inch sewer and drain
pipe and then flexible four-inch hose.
The dust collector has two main trunks coming off of it, or two main lines coming off of it.
One goes directly to my table saw, is dedicated to the table saw, and it stays open at all times.
And then the other one goes behind these tools along this wall and is connected with a blast
gate to the bandsaw, and then also connected with a blast gate to the rest of the system,
which is currently only hooked up to the miter saw station.
So every time that the dust collector is running, there's two ports open.
Always the table saw, and then either the bandsaw or the miter saw station.
And it works really, really well.
I can close one of them, but you can hear the machine kind of change pitch and be bogged
down just a little bit.
So I just leave them both, or leave two open at all times on separate lines, and it works
out really well.
So a year after having a completely empty garage to start with, a clean slate, I guess
you could say, this is my shop.
And if there's any advice I could give anybody for whatever type of shop improvement, or
tool upgrade, or whatever it is, the best thing I can tell you is to earn it, and to
never go into debt over a small tool, or of any tool of that nature.
This whole shop was started with a miter saw and a $200 investment from my household income
to buy materials.
I used that miter saw and $200 worth of 2x4s and dimensional lumber to start selling outdoor
furniture.
And since then, it has snowballed into what it is, completely debt free, all based on
the work and effort that I put into it.
So, anyway, I hope you guys found something of use in this video.
Thanks for watching, and you all have a great day.