Crash course in wood movement - Avoid the pith!

BPo3 Homestead
90 followers
Avoid the pith! The pith is the center of the tree. It is the most unstable material and moves the most. If possible, cut it out and use the adjacent material. Wood will expand and contract along the grain. So the left and right sections of this board will mostly expand and contract along the boards thickness. This is ideal in most cases. The center area, the pith, has the grain in a more circular shape. The grain will always want to "flatten out" over time, which will result in the board cupping in the direction necessary to flatten the grain.
#Woodworking #WoodSelection #WoodExpansion #WoodContraction #DIYWoodProjects #WorkshopTips #WoodGrain #Lumber #Crafting #WoodenBox
How is this board going to react when it
dries out? Well, look at the wood grain.
Let me flip this around so it's a smiley
face. Look at the grain itself. You see
this? This right here is a big smiley.
Well, all of the smileys or the
frownies, depending on which way you
want to look at it, they're going to
want to flatten out over time. They
won't be perfectly flat, but what needs
to happen to this side or what needs to
happen to that side in order for this to
become flat? Well, this side needs to
come down and this side needs to come
down as well. Therefore, in this
orientation, this piece of wood will no
longer be flat over time and it'll it'll
go this way. So, this side will come
down and this side will come down based
upon the grain right here. And we can
actually confirm that a little bit by
holding a straight edge onto this. And
we see that it's touching. You might be
able to see, I'm not sure, but it's
touching on both ends. And there's a
slight gap in the middle. So this board
has already started to move and the
majority of that movement like I said
will be here near the center of the pith
or in plain saw lumber. This side is
quarter saw. The majority of the
movement will be like this. This side is
quarters saw. The majority of the
movement will be like this. But where
they're hinged in the middle, it's going
to want to rotate down on that side and
rotate down on that side. So just keep
that in mind. Cut that out. And uh you
know, I built a lot of projects uh in my
early woodworking days from box store
lumber. If I go to Lowe's locally or
Home Depot or whoever locally, a 2x8,
2x10, 2x 12s, those are typically
southern yellow pine. Uh 2x6, and 2x4s
are typically either white pine or
Douglas fur where I'm at. So, if I get
the bigger boards and I simply remove
the pith in the middle, that always left
me with two sections of stable quarter
saw material. And I used box store
lumber to make some pretty beautiful
pieces, if I do say so myself. Stuff
that I'm really proud of. Um anyway
um crash course in uh wood movement.
