I bought this tractor a year ago, and I'm about to roll over 400 hours on the dash. Overall, I'm happy with my purchase. The lack of underbody protection has caused me some frustration, but that is mostly situational with the forest I'm working in. The loader's lifting capacity is great. The mobility in and out of tight spaces is great. Hydrostat transmission is great for what I do. It has a DPF filter, which I've yet to have to run a regen cycle on. I've had several wear and tear issues related to how I use it in the woods, and one warranty repair on the power steering, which I'm not sure who or what is at fault for.
JK Boots Update 4/5/25: My O.T.s are still great. Heavily worn and holding up great. Still my go-to work boot. I recently got a pair of the square-toe western boots (The Buck - Indigo | Chocolate) for days where I prefer the speed of getting in and out of the boots, or days where I'm mostly on hard surfaces all day, or running errands. Very comfortable right out of the box with zero break-in for me. THUMBS UP AGAIN. https://www.jkboots.com/products/the-buck-navy-chocolate?bg_ref=BwlWA71DVt
This is my bad boy 4035h tractor. I've had it for about 13 and a half months. I'm about to hit 400
hours on the dash and I feel like I've got a decent enough opinion about it to actually talk about it.
This is the 4035h. 40 is the series of tractor. It's a 40 series tractor. 35 is the horsepower.
This is a 35 horsepower tractor with 29.5 pto horsepower and h is the transmission.
It's a hydrostat transmission. I've got the hood up because I want to show you something under here.
Nothing bad. They make this 4035 in a cab model which for for stuff like you know just moving
dirt around out here in the wide open or working on the driveway sure I would have loved to have
a cab model with air conditioning but as I'll show you with with my experience with sticks and stuff
I probably would have lost part of the glass on the on the cab by now or just I think I would
have lost too much visibility for working in super tight spaces in and out of these trails.
If I'm not mistaken this tractor I think I have this right don't quote me on this but this is
technically a TYM tractor. That tag down there has the TYM brand. So TYM tractor that is sold
to Bad Boy. Bad Boy rebrands it and then builds their own loader. So the loader if I'm not mistaken
is built manufactured completely by Bad Boy but the tractor itself comes from TYM. So when I was
searching for a tractor it was either this one or the Kubota equivalent which I don't remember the
model number off the top of my head and the reason why I went with this one is the loader lift
capacity on the Kubota it was 1,100 pounds and this is 2,200 pounds. So I knew that I was going
to be in and out of trails picking up debris piles moving trees around picking up logs. I was going
to be relying heavily on the loader arms which pallet forks moving stuff around right so I went
with the tractor that had much larger lifting capacity. My only concern was mainly fueled by
relatives and friends that said well you know Bad Boy doesn't really have a
a long long name in the tractor world are you going to be able to get parts for this thing
and that was a legit concern until I figured out that this is essentially a Branson tractor that
which was purchased by TYM. So it's a TYM tractor now so if Bad Boy doesn't have parts well TYM
would. It's essentially their tractor which that hasn't been the case I've had to replace a couple
things and or one thing and there was no problem getting parts for it. So that's why I went with
this one. I have used this tractor a lot in tight spaces sticks and as a matter of fact there's a
still shoved in the frame right there that I got to get out and that's that's more situational
in and out of these trails and over sticks and debris piles and that type of thing and you try
to be careful you really do right I'm not out there trying to abuse and trying to tear stuff up
but if I had one complaint about this tractor it's probably situational the way I use it on
this property is I would like some type of underbody armor some type of underbody protection
on this tractor the majority of people probably won't need that but based upon my experience
I have I could have really benefited from it so let me tell you all the stuff that I
tore up on the bottom of this tractor you see that filter right there that's one of the hydraulic
filters it's you can't tell but it's bent off on an angle because something got stuck under there
and wedged and bent that just the other day I don't know if I'm going to record the footage or
not or include the footage or not but I whacked into something on this piece right here this
steel hose and busted this fitting loose so I was spraying fluid all over the place when I was using
my loader this is the throttle linkage for the pedals which this actually needs to be up all
the way let me go ahead and fix that while I see it this little boot protect the cable end right
there okay so this is your throttle cable well this entire bracket got bent off to the side
that way so my throttle cable didn't work with my pedals for a while it kinked the line
and then the spring of course while it was bent released all the tension on there so the pedals
would stick essentially not returning to the neutral position all because of sticks and
what else there is let's see can we see it from here yeah we kind of can see it from here all
right so there is this this metal hose right here that my finger is touching the black one there is
a rubber boot right there rubber coupling with a clamp on one side of clamp on another side
well that is the suction side of the auxiliary pump for the hydraulics so this uh is there a
filter yeah it connects into let me see it connects into a filter over there on the other side and
that pulls fluid hydraulic fluid from the reservoir underneath the seat pulls fluid and
goes into the pump so the pump is sucking the fluid in a stick blew off one of the sides of
that coupling and sucked air into the system and air inside your hydraulic system causes your loader
to bump around it doesn't go up smoothly doesn't go down smoothly it's makes all kinds of racket
all kinds of craziness i thought i tore up something uh really bad but ended up being
just a bunch of air in the line and due to contamination concerns i went ahead and changed
all the hydraulic fluid uh based upon your recommendation from a diesel tech family member
and that sucked because that that all that hydraulic fluid had like 10 hours on it something
like that uh so i did that what else have i tore up over under here um i don't know if it was my
fault or not uh but i blew the seal on the inside of the power steering causing fluid let me get
back up causing fluid to come out of this i don't know i don't remember what side it was on but come
come out of this fitting right here so this is your supply line for the power steering hydraulics
and this is one of those um two-way fittings i don't know how to explain it but there's a lock
nut on here so you back off the lock nut and then you rotate this into place and then you position
it in the angle in which you want it to be it doesn't have to bottom out the threads right
you position the angle that you want and then you lock it into place with this nut on the outside
so it started spraying hydraulic fluid from right here and i thought okay well that's probably just
an o-ring that went bad for some reason i have no idea why so i disconnected all this and started
to remove this fitting and realized that there's some interference with this with this uh front
axle and i thought well that's just horribly designed you can't even work on this what in
the world is going on i can't replace that o-ring well i ended up wiggling it around a little bit and
maybe bending a little bit to get it to uh actually turn all the way off i removed it yeah
there's an o-ring in there but it looks fine i'll put a new one in there anyway put a new o-ring in
reassembled this put it all back together and i was using a piece of like a soda bottle like a
little thin piece of plastic to put in between this and the uh the fitting right here as i turned it
so it was kind of less friction and slide easier so it wouldn't tear this up well i did all that
and it was still leaking then i contacted bad boy and i was like what is this part that i need
to replace maybe i've got a crack inside here and they said no that's that's not replaceable
you have to replace the entire power steering and i thought well that's crazy just for an o-ring
so we did a warranty repair replacing the entire power steering but it wasn't the problem wasn't
the o-ring the problem was i blew an internal seal causing too much back pressure which um
came out of this fitting so it wasn't this to begin with and yeah these are not replaceable
we got to replace the entire power steering unit so this is on a factory factory warranted
power steering um assembly so i tore that up i think i did i mean i don't know i don't know
what i did to destroy the power steering but probably my fault right you see the bumper
is bent up right here and i've got a piece of the grill just chilling down right here so a lot of
people complain online that the grill is just so flimsy and delicate and you look at it the wrong
way you're gonna break it well it's just this plastic honeycomb that's very delicate and i
guess i hit a stick or something because one day i noticed that uh there was a hole where is it at
there was a hole right there in the grill and there it is so i'm not too worried about that i
honestly don't really care the radiator is far enough back to where it doesn't damage the radiator
and that's just unfortunately the cost of doing business right i bumped into a root ball as i was
rolling them out on this property we have a bunch of trees that we took down big old root balls and
using the loader to roll them well one of them rolled and then rolled back and slammed into the
bumper bent the bumper into the grill i had to hook a chain to the bumper hook a chain to a tree
back up just slightly to straighten it out so i could even open up my hood that's a me thing not
of course a uh a tractor thing you know what else have i done on here to tear stuff up i tore up the
one of the curl cylinders knowing that you're not supposed to be doing much back dragging with this
cylinder fully extended which i wasn't doing so when this cylinder is fully extended like this
this is kind of weak right so in this orientation if you have a clockwise rotational force on the
pivot right there it's going to want to compress that cylinder and sometimes bend the ram itself
right that's exactly what happened and that most commonly happens when you're back dragging you got
the bucket of the tractor down and you're back dragging you're pulling back so it's like okay
well i'm not going to back drag again i'm moving these root balls which honestly are too big for
this tractor but i'm rolling them with my grapple i've got the grapple let's use this hand got the
grapple opened up and i'm i'm using the top and bottom jaws of the grapple to roll these root
balls and i rolled and then something happened and i slipped and slammed down on the top of the
root ball if i slam down well that's going to put a force backwards or counter or clockwise in this
orientation onto those cylinders and that's how i bent one of them that's still the factory cylinder
i found somebody local to straighten out the ram uh for about a hundred dollars or so something like
that it's not perfect but it works that was my fault uh i did have the overheat warning come on
one time i was doing some rotary cutter work some bush hog work on the trails cleaning up some new
stuff during our drought we have a really really dusty drought once a year here in mississippi
and it clogged up this screen that goes in front of the radiator so you pop the hood pull the screen
out knock all the dust out while you're on the trail i have this out because i have to do that
right now see how dirty that is i knocked all this out the best i could on the trail put it back in
place and the overheating warning went away uh the gauge didn't go crazy they're just the warning came
on so this slides into here we got some thunderstorms coming so the dogs may go crazy they
don't like thunder uh so anyway this slides into here and protects your radiator and it's held in
place with one of these like automotive expansion fasteners pretty nice little setup uh so there's
that you got to be mindful of clogging up your radiator that's with just any any tractor though
uh what else to talk about about the tractor itself the seven gallon fuel tank i initially
thought man seven gallons that's it that kind of sucks i'd rather have like a 15 or a 20 gallon
tank right well it's not that bad i initially thought it was horrible but at 2000 rpms you can
probably it's about one gallon per hour so you get about seven hours of work work use on one full
tank that's about a day's worth of working a full day's worth of working so you know it's not the
end of the world i thought it was going to be a bigger deal than what it is but just fill it up
before you use it not the end of the world uh this button right here is not factory this is for my
lights so i have a set of uh leds up here on the rops rollover protection system uh a light bar and
then two pod lights one right there one right there pointing back and if you watch that video
i forgot to include where i actually put the button the switch um i just drilled a hole and
stuck it on the side in the video i said i was going to put it up here you can pop this cover
off and it's a perfect spot for a switch however you see this bulge in the plastic all the way
around it it increases the engagement thickness um for the switch and that thickness was too much
for the tabs that were on this particular switch so i couldn't put this right here as i wanted just
drilled a hole popped right there that's fine it's out of the way it's you have to be very
intentional to turn this switch on that's fine uh standard tractor stuff you have your headlights
and blinkers here on the property i don't use the blinkers obviously and the headlights to be honest
they suck they're not good uh and that's more of a tractor with a loader situation the headlights
are up there well they're right there right the headlights are right there but so is the loader
and so is the front bumper so i mean if you're out in the middle of the woods and you just you're
working too late and you got to get back home they're good enough to get home but they're not
really good enough to do any meaningful work they're really not that's why i put those up there
and that's more of a tractor with a loader situation than it is just
this particular model they're all like that right uh let's see everything that i've put on the back
side of this tractor uh one thing that i do want is a hydraulic top link but i don't have
rear remotes at all so i'd like to upgrade in the future for that um 29 and a half pto horsepower
like i said i've used this for the woodland mills wg24 stump grinder really really fantastic
attachment i might add i really like that stump grinder i've used it for their um what is it wc68
don't quote me on the model number on that i'll correct myself on the screen if i'm wrong
but their wood chipper the woodland mills wood chipper fantastic implement i might add uh this
is a quick hitch it's a speco quick hitch that i got from another youtube channel i got the
recommendation from another youtube channel good works tractor so check them out if you're
interested in any videos on tractor implements and such i believe he's a tractor dealer and of
course makes good quality videos for the stuff that he sells which i appreciate uh the quick
hitch quick hitch is compatible with both of the woodland mills items that i already said it's
compatible with this box blade this is a bad boy five foot box blade with four rippers i've used
this so much having a box blade is just i mean it's it's almost essential if you got a tractor
i've used the bad boy six foot rear grater blade which i also really really like
and i've also used this with a borrowed five foot it's an old grizzly rotary cutter and
does just fine with a five foot rotary cutter trying to think of everything that i've put on
the back of this thing i had a borrowed box blade for a while before i got mine
if i'm forgetting something i'll put it on the screen or at least show some footage i've recorded
basically everything that i've done on with this tractor uh let's see i put a lot of stuff on the
backside of this tractor i don't have any like toolboxes or anything but there's a lot of places
to hide stuff right so these chainsaw scrunches i've planted a few in my day so i keep two right
here some extra clips um what else i was hanging some wrenches right here but the not the noise
just drove me bonkers so this is your top link holder and some adjustable wrenches will hang
right there just fine and they'll stay there they won't really fall off but the noise of it
constantly rattling was just driving me bonkers some magnets put some magnets everywhere you
never know when you're going to need to throw something onto a magnet and a harbor freight
cup holder with a some velcro strap i have a can of white lithium grease that i keep right here to
help keep the skid steer quick attach locking arms on the front keep those nice and greased up and
it's really easy to use i've seen some people put a pipe a cheater pipe inside the loader cavity
to use on the skid steer quick attach arms and i'm thinking if you need a if you need a cheater
pipe because it's so hard just just spray some lubricant on it so everything slides easy
and i haven't had any issues with that of course some bungees for mostly for attaching trash to
this thing while i'm out in the woods i find some trash bungee it to the tractor somewhere so i can
get rid of it when i get back home these are the two lights that point backwards when i turn the
auxiliary lights on i took the little triangle off this thing doesn't get on the road at all
it was just blocking my visibility just like getting sticks underneath the side and tearing
up some stuff right there i got sticks all over the place yesterday when i was out here i noticed
that the the protective cover for the three point is bent forward quite a bit because it's supposed
to be touching this and i can stick my whole hand back here so there's something else that's bent
yay the draw bar i spray painted orange because i've planted that in the property a few times and
took me quite a while to find it spray painted orange and i had to reverse the pin so the factory
pin has the clip on the bottom which just reverses so the the pin is up and the clip is up and it
what else oh the loader okay so i've used a few different attachments on the front of the
loader this is a set of pallet forks uh ironcraft brand which i think used to be titan attachments
until there was discrepancy with two titan attachment companies i i don't know some
something was going on so they rebranded to uh ironcraft but i got that uh set of pallet forks
and the bucket when i bought the tractor um so i've had those the longest uh yeah i mean what
do you say they're pallet forks they do they do a pretty good job the what else do i have
in the front of this thing the grapple i have a coyote grapple that i love it is it's just
it's it's a beefy grapple grapple i've ran into all kinds of stuff with it i've used it to
you know hold on to a log and curl my way unstuck you know i've used it like a backhoe to unstuck
unstuck yourself the grapple is a root rake grapple so you can put the the back jaw the
the bottom jaw almost vertical have it opened up all the way and then the front jaw is about
six inches or so off the ground and just drive forward to to rake the dirt of any vegetation
it is awesome i love that grapple that grapple is a chinese privet destroyer i love it so the
reason why i got it is when i went to purchase my wr long third function kit and wr long grapple
i believe it was 2600 for the grapple and when it arrived i noticed the coyote sitting on the lot
and the gentleman said well if you want this one for the same price as the other the wr long you
can have this one for the same price and i did a quick search online and it retailed for like 800
900 more i started doing some side by side you know just looking at it in measurements and it's
thicker steel so i went with the coyote instead of wr long i got it for 2600 i think um so very
very happy with a grapple on the factory bucket i put a piranha bar on it really recommend the
piranha bar you can dig so much easier with it you can also like spear and uproot small saplings
which is nice so if you don't have a grapple you can still use a use that to get rid of some small
saplings and whatnot get rid of some some trees so the third function is required to operate the
grapple right so what does the third function actually do it taps into your hydraulics for
the loader and you change out your handle here to get two buttons right i don't know if you can
see that but there's two buttons here and depending on the way you have it set up well one of them is
going to open one of them is going to close so that is the third function is is this right here
it ties into your hydraulics on your loader and then gives you two more hoses that come out of
the third function these these two hoses are auxiliary hoses that go up to let me start over
the hoses come off the loader joystick area come through here and then they go to this bracket
right here the two left side attachments is your third function the one on the right is the
continuous flow for the third function which is another kit so you plug in the grapple here and
here and then that's fine for stuff that's just activated right open and then close open and then
close well this right this this piece right here is the continuous flow upgrade and there's a
computer chip that needs to be changed right here and this continuous flow goes to a different port
up there and the continuous flow is for something like uh the ls3 from lane shark i have a ls3
rotary cutter from lane shark it's an articulating rotary cutter up front so you can you can use the
rotary cutter in front you can use it in the side you can use it at different angles you could also
use it vertically as intended to be used the main function of the lane shark is to cut the side of
your lanes your shooting lanes for hunting areas or trails fantastic fantastic implement for this
particular property big time anyway but that required the continuous flow upgrade to the third
function so i installed the continuous flow i paid for the third function to be installed and when
the third function was installed and it came back to me i thought man why did i pay to have somebody
else install this thing it's it was just super super easy looking of an install the problem was
at that time my shop was not built my tools were still in and out of storage and i didn't really
have a good place to work on it so i i did pay for that but when it came time for the continuous
flow upgrade i did that myself really really really easy um so yeah the front i've used to
grapple the most followed by probably the bucket then the pallet forks and then the ls3 lane shark
the least obviously because it's a seasonal type of a thing just clean up the trails as necessary
but this loader has not let me down it's been a fantastic loader and the capacity of actually
lifting stuff with this tractor has also been fantastic i forgot to mention one more thing that
i did to the bottom of this thing on accident a little bit of damage that i again it's situational
i'm in the woods there's sticks everywhere i'm trying to clear trees and cut trails and
it is situational uh one time i was halfway across the property working on the trails and
i smell something smells like diesel fuel what in the world and then i'm as i'm going backwards i
look down and oh my goodness there is a pile of diesel fuel so i jumped down real fast the at that
point the engine rpm started to slowly go down oh i turned the ignition off and um i'm just
spraying diesel fuel everywhere the the rubber hose that goes from the bottom of the fuel tank
to the fuel pump it just got ripped off the bottom of the fuel tank so it's just spraying
fuel everywhere and i'm like oh crap luckily i had a multi-tool uh in my pocket um and was
able to use those wrenches to open up our pliers to open up the clamp on the rubber hose and
reinstall the rubber hose to the back or bottom of the fuel tank so that's another thing that i've
messed up on the bottom of the tractor i wish there was some type of even if it's just after
market or maybe i have to make something myself i wish there was some type of underbody armor for
this particular tractor maybe i'll come up with something i don't know but i think i've said
everything that i can say about this tractor i purchased it in middle of march 2024 really
didn't use it until april of 2024 though and it is may of 2025 so about 13 13 and a half months
that i've had use on this tractor 400 hours is about to be rolled over on the dash
it's been a good tractor to me i've worked it hard and i would buy it again if i had to
i bought this this is not a brand deal or anything i purchased this
and um i'm happy with it i'm very very happy with my purchase
keep your money in your pocket boy