Making a Custom Rolling Tool Cart – Thomas Johnston Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
190 Video Views·Jun 22, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine continues his shop transformation, turning these old desk pedestals into a rolling tool cart. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson. Thomas Johnson Antique
Furniture Restoration Gorm, Maine. The
next step in our shop renovation is for
me to make myself a rolling toolbox.
I've been using these pedestals for
years. Someone gave them to me many,
many years ago. They're good pedestals,
desk pedestals. They've been in the
corner. I' I've kept some tools in here
for years. Some tools that are a little
bit too precious to leave out. But now
is my chance to really clean these up
and get them organized and I'll have all
my tools in one place.
The first thing I'm going to do is build
a base for these.
I'm getting plywood and other scrap wood
out of the barn.
[Music]
This board is solid cherry. I mean, it's
made up of four cherry boards glued
together. It's a big panel. It's great.
I've had it for years. I have no idea
where it came from. Some big job we were
doing. But I'm going to use this for the
top and some other pieces.
[Music]
[Music]
[Music]
[Music]
What's up?
This is interesting.
A lot of people don't realize that for
30 years, our primary business was
finishing new pieces of furniture built
by custom woodworkers. And these are
notes on every job that we did. Uh
strictly new pieces of furniture uh
going back,
this goes back to 1990. And then this
was originally started off with this one
goes back to 83 even prior to that. Here
we got serious about keeping strict
notes.
[Music]
[Music]
Okay, I'm liking the way that this
looks. Uh, let's make a top for it.
[Laughter]
[Music]
[Music]
[Music]
[Applause]
[Applause]
I'm going to clean these drawers
with uh this is water with a little tsp
in it. Very little. I'm going to clean
them and wash them inside. Now
[Music]
that really well
[Music]
Okay. Okay. So, here's my basic uh
rolled out tool cabinet. And um that's
exactly how I envisioned it. But uh now
I've got to outfit it with my tools.
Good morning, little chicks. Yeah. How
are you?
How you doing?
Good chickies.
Okay, I think I'm uh ready to start
putting my tools in here. Uh the first
thing I'm going to do is build like a a
pull out panel here that can hold my
Japanese saws.
[Music]
So
yesterday I made this shelf. I installed
these undermount drawer guides. I didn't
do any videography for that because I
have absolutely no idea. This is the
first time I've ever installed
modern glides, but it all worked out.
So, I made this uh bracket yesterday.
Luckily, I had a bunch of perfect scraps
left over from my daughter's last job.
This uh longest saw really determines
the placement of this
I really like this.
I was already realizing that I might
need to do another one on this side, but
um let's get started on the other tools
first.
This is an old uh bench that I used for
a million things, but I started putting
the tools I was using just on a
particular job on this bench, but then
it quickly got out of hand. I started
keeping all my chisels up here, other
tools. Then during the renovation, it
really got trashed. But these are the
tools I use a lot. What I'm already
thinking is that
I need to build a tray trays plural for
two or three two or three of these
drawers. Uh because it's a waste just to
put chisels in the bottom of the drawer.
I could double this up.
So I cut up quarterinch plywood into the
pieces for these little boxes. And now
I'm just gluing them up.
[Music]
[Music]
So, here it is. My uh very basic rolling
toolbox.
Uh everything I use in this project is
just stuff that's laying around the barn
or or the shop here. The only thing I
bought were the drawer runners that I
use for these.
I've outfitted these drawers with trays.
I've built these vertical panels.
So, uh, all I got to do is toss all my
tools in here, right?
Well, uh, not so fast.
For 50 years, I always had employees.
We used a lot of shared tools. I had
tools all over the shop, somewhat
organized,
uh, but most of the tools we shared. Of
course, I had a lot of my own tools that
no one used, but everything else was
available.
These are most of the hand tools that
came out of cabinets and off our shelves
on the on the walls here. They weren't
available in the yard sale. I put them
in boxes, took them all up to the
storage room. Now I've brought them
down.
I want my toolbox to only hold the most
essential tools. tools that I absolutely
use all the time. Okay, chisels. Well,
that's a no-brainer. These are my good
chisels,
ones I use all the time.
Stanley number 40s. I brought these new
in 79. I think they're actually like
collectible now.
Okay, my uh my Japanese sauce. Nob
brainer. Still got plenty of room in
this drawer.
Okay, but what about these chisels?
These are the shop chisels.
They're good chisels.
These are the chisels for all the jobs
you did that you didn't want to use.
Your good chisels, huh? Here's some
perfectly good chisels, which I will
hang on to. Bought a set of Chinese
chisels. About 10 bucks for a set. They
turned out to be fabulous chisels.
Fabulous steel. They sharpen right up
and they really hold their edge. Great
set of chisels.
Wow.
This is the first hammer I ever bought
around 1970. I was an apprentice tin
knocker.
S- swing hammers. Be foolish to get rid
of an S-wing.
I only need one 12 ounce. That's the
hammer I use the most.
I'm going to request that my Lixie
mallets get buried with me. This isn't
all the pliers. There's got to be some
more around here someplace. But you get
the idea.
Do all these pliers go in my new
toolbox? I don't think so.
Screwdrivers. This is only the small
screwdrivers.
There's got to be a lot more around here
someplace.
There are plenty of easy decisions to
make, too. Here's my carving tools. I
will put those in a drawer right now.
I like that.
Okay, so now what about my hand planes?
This is one of my favorite planes, my
little Lee Neielson block plane. I've
had this for 40ome years. It's one of
the early ones. Really, really comes in
handy. And you get your basic block
plane, old style. There's a record.
This plane used a lot. And uh as you can
see, these planes all had a weak point
along about there. They don't do well on
concrete floors, but also extremely
extremely handy plane.
Now I could build like some little
shelves in here to hold these planes. I
think there's enough room. Yeah, there
is enough room.
And then there's my favorite bench
plane. So Bailey number three, of
course, which is a Stanley plane. Picked
this up for about 10 bucks.
Rehabbed it. Been using it ever since.
I was shopping for uh ebony and tulip
wood at a great store called Rare Woods
USA here in Maine. They sell some old
tools. I was attracted to this plane.
It's an old Stanley. It's a number
three. I like the number three. It's a
bit smaller than your uh the most common
plane's a number four. Three is just a
bit smaller. This is an old plane. I
liked it cuz I could see it had rosewood
handles. And uh I went online and was
able to date it to the late 19th
century. Uh this plane's from about
1890. So I'm going to take it apart and
clean it up.
Now I'm going to put all these parts
into uh this is just a commercial grade
uh rust remover liquid.
All right, I'll let those soak for a
while and uh in the meantime I'll glue
up the handle. There's old glue or dirt
on here. I'll see if I can uh clean it
off a little bit with some hot water.
If Ella's interested, it's probably hide
glue.
Okay, I've let this uh dry for an hour
and it really cleaned up well. So,
now I'll glue it up.
Okay, I've let these uh soak overnight.
I'm going to uh rinse them and put them
on paper towels to dry.
And this liquid uh can be reused, by the
way. I'll filter it into the back into
the container.
Okay. While I'm waiting for these to
dry, I'm going to put the uh handles in
some lacquer thinner. Uh I'm going to
strip the old finish off.
Now, the blade seems like it's in really
good shape. I think I can just sharpen
it up. Uh I'm going to try to clean it
up a little bit.
Uh there's stains on here that didn't
come out with the rust remover and then
I'll sharpen it.
I just recently got uh bought these uh
rust remover blocks. I'm curious to see
how they work. This is the medium one.
I'll try it.
Okay, blade sharpened. Um, set that
aside.
See if I can get finish off the handles.
The wood is so dark coming out of the
thinner, but you can see as it dries.
Uh, you can see how beautiful the
rosewood is. Okay. Uh, everything's
dried overnight. I'm going to sand up
these handles just with some 220.
[Music]
All right. Now, I'm going to give them a
coat of tongue oil.
Okay. Over the next 15 or 20 minutes,
I'll keep coming back to this and keep
it wet. Let the oil soak in. Okay, now
uh back to the metal parts of the plane.
Okay, now I can start assembling the
plane.
All right, let's try it out.
Wow,
it works great. And uh it looks pretty
good, too. Not bad at all for a 130 year
old plane.
I don't think there's any
great way that I can incorporate this
into my toolbox here. I got to think
about that. It might end up back on the
wall. I'm not sure.
And my scrapers.
No brainer on scrapers. I use these a
lot. They'll definitely get drawer
space.
All right, here you go. Scorps.
How often do you use those?
I mean, unless you're a Windsor chair
maker.
I'll definitely be hanging on to these,
but not in the tool box. This shop is a
production facility now. The owner
doesn't want a lot of stuff hanging on
the walls. In fact, we still have stuff
to get rid of. You know, things like
this messy shelf left over from the old
shop. These were my things I used to
finishing. I haven't gotten around to
getting rid of that yet. Looking forward
to it. There's plenty of cabinets in the
shop here.
We've just kind of tossed a bunch of
power tools in here now. But I'm
anticipating that now that we now that I
know how to you install drawer runners,
I also know how not to install drawer
runners. We'll be able to build some
drawers here and keep things in those
drawers like the occasional scorp.
So, here it is. My uh new tool box. I'm
going to have fun outfitting this out,
going through all my tools. Um,
I really like the fact that I made it
all without didn't buy any new materials
for it. And you know, I realized I I
need to have a cup holder in it. I got
to figure that out. So, what I'm going
to do is this. I'm going to start my
next restoration job. As I use tools,
I'll put them in a toolbox. Probably
after a year, maybe longer.
any tools I haven't used, then they'll
go. And I can keep these boxes of tools
upstairs in the storage room, bring them
down as I need them, which I've already
started doing. I think it looks pretty
good.
More importantly,
I uh I think it will work really well
also.
