Tom's Back! All-New Restoration of a Danish Modern Heirloom

Thomas Johnson Antique Furniture Restoration
41 followers
207 Video Views·Nov 29, 2025
First, a bit of shopping-season news: if you'd like to buy a "Looks Pretty Good" t-shirt from Tom, they are now available, at thomasjohnsonrestoration.com
Happy Thanksgiving, everyone! We're grateful to our viewers for all of their support!
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine restores this handsome solid teak table, a genuine Danish Modern classic. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
What's going on here? Haven't you heard?
We've got t-shirts.
It's a Heather Grey heavyweight crew
neck t-shirt featuring our signature
phrase, "Looks pretty good." Printed on
the left chest and a logo on the back.
Made in America and screen printed here
in Maine. I guarantee it's going to look
pretty good.
I'm Tom Johnson, Thomas Johnson Antique
Furniture Restoration in Gorm, Maine.
This is a teak table, mid-century
modern. What's interesting about this
table is that it's solid teak. 100%
solid teak. the tabletop, of course, the
leaves, the legs, the apron,
the secondary support pieces, and even
the rails that attach to the tops and
make up the sliding extension set. This
table was built in 1966
in Denmark, purchased by the family when
they were stationed in Germany.
It was part of an entire set.
For the owner, this table represents
memories of family meals for over 20
years where family council meetings were
held, decisions were made, and of
course, many evenings of homework.
For him, this table represents the
object that brought the family together
at the end of each day.
During shipment and years of storage,
this table has suffered a bit. But
actually, it's actually held up pretty
well considering all the use it got. And
now it's time to bring it back to life.
So, the first thing I want to do, I'm
going to take these rails
off the tops. And then I've got to glue
up the end that's broken off here. And
there's a couple of cracks I've got to
work some glue into.
So, this is going to go back together
pretty well. I don't think there's any
pieces of wood missing. Uh, there's some
cracked pieces here, but I've got to get
rid of this blackness. this blackness,
which I assume is from uh liquids
getting down into that crack before it
finally broke apart completely.
I'm going to try using uh some lacquer
thinner and a brush. I don't want to use
any water-based product on this because
I don't want the wood to swell. So,
we'll give this a try.
So, I tried scrubbing with lacquer
thinner. Didn't seem to have any effect.
I tried my uh heat gun on the other
piece here. That also seemed to have no
effect. So, I think I'm left with just
uh scraping
All right, that didn't take nearly as
long as I thought it would. Seemed
pretty daunting at first. Okay, so now
I'm going to set up on the bench here
and do a dry run of clamping it up.
Okay, off camera I glued it up. I mean,
I clamped it up dry. So, here goes.
I'm a little out of alignment right
here. It's not level. And this is where
that big
Cracked sliver was underneath.
Okay. I think that's going to do it. Uh,
we'll let it dry overnight and see what
we got in the morning.
All right, let's uh let's see what we
got here.
Oh, this uh came out really well. Now I
got to do the other half.
See this uh this board? Well, where this
joint is, it's still hanging on with
some shards of wood. So, I don't really
want to separate it if I don't have to.
Actually,
there's only there's only one
shard holding it together. So, I think I
can separate that. And that way I can
really clean this.
Yeah, there there's a few nasty
splinters here, but I think I can live
with that. It's better to clean this.
This is cleaning up really well. I
didn't think it was uh really necessary
to show more scraping.
This should be a straightforward glue
up. In fact, I don't think I'm going to
have to use those deep throatated clamps
trying to make it level. Um, this is a
little bit better condition. So, uh, I'm
going to clamp it up the same way.
This went together like a breeze.
Yeah, it's good.
Okay, get these clamps off. See how it
went. And then I've got glue ups on the
apron.
What I've seen so far on this apron
assembly
ends up there's only two places that
need uh repair. And one is this split
rail here.
And at the other end is this big chunk
of wood here which has been broken off.
The good news is that uh the pieces were
saved. I haven't checked yet to see how
they fit, but it looks good. My guess is
that somebody moved this table while it
was fully assembled and uh
maybe they dropped it or or who knows,
but it seems pretty strange. Let's see.
Oh, it's a good fit.
There's a little piece of wood missing
on the top corner of this part.
And we also have the metal guide that
fits in there which guides those rails
that support the top.
Luckily, I have a nice piece of teak
here. Um,
still going to be a little
tricky figuring out how best to do that.
I've let this dry for a few hours, so uh
let's see if I can uh trim it up and get
the next piece glued on.
That looks good.
It's time to prepare these tops for
sanding and refinishing. Uh, this leaf,
you get a good sense of what the
original finish might have been like. It
It looks like an oil finish. and the and
the tabletops themselves, the two halves
that got the heaviest use, uh the finish
is like worn off.
And of course, an oil finish may look
beautiful at first, but unless you reil
it on a regular basis, it will
deteriorate. And in 50 years of
refinishing furniture, I've only met two
people who actually reoiled their dining
room tables, and they look great. But if
you don't, it has a tendency to wear off
like this top and get rings in it like
on this leaf.
The good news is that with an oil
finish, especially an old one like this,
uh it's pretty easy to remove. You don't
need to use uh solvents. You can even
you can use something like Dawn
detergent, but that needs to be rinsed.
And so I'm going to use uh TSP
tricodium phosphate which doesn't need
to be rinsed.
The directions call for a/4 cup of tsp
uh in the US that's a volume
measure and I so I weighed it out and
it's 50 g along with one gallon of hot
water. Uh, and that's 3.7 L
just hot tap water.
Oh, and I'm using these uh 3M
Scotch-Brite pads, the maroon uh to
scrub with
the initial washing of the two tops. I
think I better uh change out the water.
I don't know.
Everything washed down pretty well. Uh,
but before I start sanding, and I'll
talk about that, I realized
I've got to repair some
some of these screw holes in the bottom
of this section.
We had already guessed that at some
point in the moving and storage process,
this table had been dropped or
something. And this rail in particular
had been ripped off.
You can see here how we're missing a
piece of wood.
And this wood's lifted.
This one, you can see both sides here
are lifted up where the screw was
forcefully pulled out.
Luckily, all the wood's there.
So, I'll just work some glue into these
areas and clamp them flat. And that
should do it. Uh, where the wood is
missing, I'll probably just epoxy that.
So, yeah, I'm sanding this top. Um, I'm
going to give it a good sanding. Uh,
let's talk about that.
Anyone who watches my videos know that I
like to really keep sanding to an
absolute minimum. And this is most
important on sentimental pieces that are
period antiques from the 19th and 18th
century. When we get into the 20th
century here, uh starting with like art
deco and then on up into mid-century
modern,
uh it's different. People don't want to
see all the scars and road rash of the
years. Uh they're more like cars and
automobiles. They need to look good. Uh
look new. And on this top especially, uh
I had some serious issues with the
color.
After I cleaned the finish off with
Dawn, it looked nice and clean, but very
very bleached out. I started sanding and
it was very quickly coming back to the
uh the original color of the wood
using my uh color check card here. I
think you can it's easier to see the
difference between what I found in here
where I've just begun sanding.
And also when I cleaned down the leaves
there was a huge difference. The leaves
were a lot darker than the rest of the
table. You can see that here. This is a
leaf. This is the table even after my
preliminary sanding here. But I grabbed
the second leaf
here and just started sanding it. And
it's very quickly coming back to the
same color as the ta as the main table
top.
So it feels pretty good that the leaves
in the table are going to come together.
color-wise.
And you'll see I'm using a uh Stir
pneumatic sander
uh straight line sander, double pad,
Stur made these sanders. Uh Soda
National Detroit. This one's got smaller
pads on it that I use. These are great
sanders. Uh they don't make them
anymore. I have no idea why. They're
made primarily for the finishing
industry. Of course, you can sand with
them, too. I like sanding with the same
sander I'm going to use when I'm
finishing the tabletop. So, uh I have no
idea what people do now that they don't
make these anymore. You can get them on
eBay. And um
but they do use a lot of air. You need
at least like 12 CFMs
uh to run one of these sanders and a
good size tank on your compressor.
I'm using 100 grit paper and then I'll
go over it with 150.
I just want to show you a couple of the
issues I'm dealing with here. I got some
uh scratches and also some dents.
I've got this one uh particular kind of
wicked scratch or abrasin. I've got to
sand that out. And I've got a bad dent
right there. Um my first inclination was
to grab the putty, but I think I'll put
a little wet rag on it. See if I can uh
the moisture can bring it up. As far as
these scratches go, I don't mind, but I
won't concentrate on that one scratch. I
want to take this whole thing down.
It'll be kind of a gauge. I really need
to make sure this gets back to the
original natural color. And um I sort of
can't tell.
If I sand it down to where that
scratches out, I know I'm there.
So, back to this dent.
I wet down a little piece of rag in the
sink and I'll put that there.
In fact, I'll put a drop of water right
on it.
And then as I go on working on other
parts of the table during the day, if I
notice that's a little dry, I'll come
back and
put a drop of water on it.
There's a huge dent on the edge of the
table here. Uh I don't have much hope
for that, but I've got time, so I might
as well I might as well try that, too.
Get a little water on it.
I doubt that it's ever going to swell
all the way back to its original shape,
but might get something out of it.
I mean, you can apply uh steam to these,
too. You don't touch a hot iron to there
where the rag is, but I while I've got
so much other work to do, I take a
passive approach because it works most
of the time. I can still try steaming it
later if I think it's going to help.
I'm sanding the bottoms of the entire
tabletop and the leaves, too. I'm going
to be finishing the bottoms the same
amount of finish I put on the tops.
I'm hoping you can really see the
difference between the side that hasn't
been sanded and the side that's been
sanded.
Okay, I finished sanding the table tops
and bottoms. I've let I've just let them
sit here for a few hours. I'm letting
the dust settle and now I'm going to put
a coat on the bottom. I'm going to
finish the bottoms first. And I'm going
to be using the uh water locks varnish.
Well, I hope the uh top looks as good as
the bottom here. It's uh chilly in the
shop tonight. I've got the heat up, but
I got a fan on. Maybe in a few hours
I'll be able to turn the fan off and uh
we'll see what it looks like tomorrow.
Okay, it dried really well.
Looks good. It soaked in quite a bit.
I'm going to give it another coat. And
I'm going to go over it first with a uh
Scotch-Brite gray pen just to knock the
knits off of it.
All right, I'm going to apply the second
coat. Um, I'm not going to do it on
camera. I got plenty of coats to go.
It's just like last night.
All right, it's been about uh 22 hours
since I put this coat on. I kept the
heat up pretty high last night in the
shop here and uh they look great. They
feel great. I think I can flip them over
and put the first coat on the top.
I've got a few spots with putty that I
want to touch up before this first coat.
This was an area I tried to wet with
that rag, but it didn't really come up.
It came up some, but I ultimately had to
fill it. And I'll be using these uh
Mohawk
brush tip graining marker honey spice
to do this.
Hope it's not too dark. I might wipe
this off with a little alcohol.
It's hard to tell when I don't have any
finish on.
Well, I just won't really know until
I get some finish on here.
There's that big dent in the side.
Could use a bigger
marker for this.
We'll see what it looks like when I get
some finish on it.
Now, here's another little spot of
putty. I think I got the other side of
it. And you notice these these are drips
from I mean, when I did the other side,
the finish kind of came around there.
I'm not worried about those at this
point. Uh, I'm going to get a coat on
and then sand this a bit.
All right, it looks good. The I was
worried about the color difference
between the leaves and the top. Doesn't
look bad. We'll see what it looks like
tomorrow, but it's going to be pretty
much soaked in by tomorrow.
Okay, it's the next evening, a little
over 24 hours since I put this first
coat on and uh it just soaked up
completely into nothing. So, I'm just
going to put on uh another coat and
we'll see what it looks like tomorrow.
Okay, I'm uh sanding up the apron and
legs. The coat I put on last night went
down really well. Table looks good. Uh
it didn't all dry and shrink in. And uh
I'm going to let it dry and maybe this
evening or maybe tomorrow I'm going to
sand it and put what I hope is the final
coat on the table and the leaves. In the
meantime, I'm uh sanding the apron and
the legs.
The apron's in good shape. It's uh just
sanding right up.
The legs are a different story.
Especially on the outside corner of the
legs, they're really, really beat up and
they're requiring a lot of sanding. Let
me sand this a little bit. I think
you'll be able to see better.
Yeah, you can see all the scarring and
beading. Some of this I've been able to
get out with a little water and others
I've just had to sand it away.
So, I've just got to keep uh sanding
away here. And hopefully today I will
get a first coat on the legs and the
apron and get the third coat on the top.
See dents like this one,
like this one, I might just have to fill
in with Famo wood putty.
These might sand out.
And you can see as I sand, all the dents
become apparent. Actually, I've already
sanded out a bunch of these came right
out. Some of them won't come out. Some
of them are too shallow to be filled,
but yet they won't sand out. And that's
okay. I'll fill the ones that I can fill
and uh sand out the ones that I can
sand, and the others can stay.
Okay.
I decided to wait on another day before
I recoat this table. I noticed as I was
working yesterday,
during the day as I was working, the
finish was still shrinking up and the
grain was becoming, you know, much more
prominent. Even some places where it
soaked in more than I thought it was.
So, I'm glad I left it. But I'm going to
sand it now and give it I hope it's the
final coat.
So, I'm just sanding by hand. Uh, it
sands really well. And I'm using 320
freecut paper.
I'm hoping you can see here the texture.
and not just the texture. You know, the
surface is is rough. It's just dust and
stuff that's landed in it. And I think
you can see those little bumps. So, the
first step is I take the sandpaper and
uh it smooths off pretty quickly.
And after this, just first quick pass, I
think you can really see I'm hoping you
can really see all the little bumps.
Okay, so that just took maybe three or
four passes with the sandpaper.
I wipe it off a bit,
see what I got. And then I take the gray
Scotch-Brite pad
and I go over it.
And that really seems to like
even out the the strokes from the
sandpaper.
And because I'm sanding section by
section,
when I go over them with the
Scotch-Brite pad, it uh brings the
sections together, makes them really
even.
All right,
I've got the whole table sanded now and
gray padded. The last step before I
apply finish, I'm going to wipe it down
with this uh Mohawk wax wash remover.
It's a kind of like a it's a proprietary
paint thinner of some sort, but it
really does a good job of uh getting any
contaminants off.
Now, up to this point, I've been using,
you know, Waterlocks original. Uh, this
is a semig gloss finish, so it's got a
little bit of a shine to it. But for the
final coat,
I'm sticking with the water locks, but
this is a satin finish, so it'll have a
much lower sheen.
I'm also going to use a foam brush. Not
my favorite, but I like the way it
smooths this stuff out.
Okay. Wow. that the this coat looks
great. It's only been 15 hours since
I've put a coat on. Uh it looks great.
It's a it's a very very nice mellow
sheen. And the thing about this finish
is uh as it dries, even over the next 24
hours, the sheen will even reduce a
little bit. And it actually takes about
6 months to fully uh achieve the soft
glow.
Okay. Okay, while the top's drying, uh,
I've got to go over these legs with a
little bit of, uh, 320 very quickly,
look for any spots that need a little
color, and then give them, uh, their
final coat.
Okay, the apron, the legs look great.
Top's been drying for about 36 to 40
hours. I'm going to assemble the table.
First thing I'm going to do is go over
these legs with uh 40 steel wool and uh
some feed and wax polish.
And you also don't want to overtighten
these.
You don't want to rip that
bolt right out of the leg. So, nice and
firm.
No need to go crazy.
So
you can See here the number one.
Here's the number one.
And so that one covers up that one. It
goes just like this.
See? And over here you've got number two
and number two.
Let's
see. I'm having a little bit of
difficulty locating this one.
There it is.
And see, this is why I left those others
loose so I can I can actually get under
here a little bit. I can see the hole.
Got the scratch off. There we go.
Definitely got it.
See the hole through this rail is
elongated and that's to allow for wood
movement, but it makes it. But now you
got to go down there and find where the
screw hole is. There's a lot of leeway
there. I think I have it, but I'll peek
under there. See if I can see it.
It's out here somewhere.
I may go back and loosen the other
screws a little bit just so I can lift
that up. So, I loosened the other screws
just a bit. And now I can see in there.
And I can see that screw hole. And there
you go. Lined up.
Still got to find it again with the
screw.
At least I know I'm in the right area
here.
Okay, good.
Okay, slides attached. Now I'm going to
use some paste wax and wax up these
rails all the way along and the inside
too.
Now, note these holes in the rails.
After the tabletop is installed, you got
to have to we're going to climb
underneath and and put these dowels in
there. They're the stops so that the
table can't you don't accidentally pull
the table top out all the way.
They're very snug.
Now, I'm also going to wax these guides
and these slots where those rails fit
in.
Even this little metal
guide
Definitely a twoperson job. I may have
to get some help
just to get these lined up.
There we go.
Great.
I'm so glad to have brought this table
back to life and uh I think it looks
pretty good.
These are the clamps I used for gluing
up the top.
These are the tools and materials I use
for finishing.
If you enjoyed this video, please hit uh
subscribe, like, share it. I'd
appreciate it.
