849. Tips on Drying after Thrown and Preparing Handles for the Mugs with Hsin-Chuen Lin 馬克杯手把製作小技巧

Hsinchuen Lin
205 followers
97 Video Views·Apr 12, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
so this is to show you how I remove my
throat mugs from the bed
insert i didn't even uh wire it off
until
today since the weather is kind of
uh cold and uh little bit moisture so it
is dry slowly the next day now the rim
is little bit firmer but the bottom is
still soft so I just w it
off and then um flip it upside down and
put it on my bed let it let it dry all
the way until I'm ready to trim i'm
squirt up the clay from the bed
insert use a sponge to clean it fairly
easy to clean
check it
here and here's the other
[Applause]
one turn it upside down
and put it on my bed
[Music]
[Music]
this is how I dry it upside down on my
bed just let it dry all the way until
you're ready to trim because usually the
the rim dry a little bit faster so when
we flip over the bottom will dry faster
because it's on the top so the moisture
coming from the top so it will even out
and uh maybe another day I will be ready
to trim
them okay so this is the uh best system
i clean it up very easy to clean just
bunch it off and you can stick them
together this is very thin so it doesn't
take a lot of room and now let me show
you drying process over
here this are that angle marks I made
yesterday and I just show you how I wire
them up and put them upside down until
they are ready to be trimmed probably
tomorrow and the rim is firmer so it can
sit upside down when I find out the uh
the rim is firm
enough and here is another pieces that
uh I met the day before yesterday and uh
they are firming up now and ready to be
trimmed
that the foot is quite firm and uh the
drying is very
even all right so this is my drying
process usually when you throw something
like a balls and mugs the rim usually
dry a lot faster so once you find out
the rim is firm w it up or you can w it
up right after you throw and then uh
flip it upside down and dry upside down
and let them dry all the way until
they're ready to
trim all right I'm going to show you an
easier way to make your handle without
using water to pour it i've been using
this method on all my
mugs so first you get your clay and you
roll use your hand to roll the coil
you can roll as the as even as you
[Music]
can right and if you cannot make it very
even there's another way to do it is get
a piece of a bed or some kind of wooden
board that is flat and then you just use
that to roll it
gently so it will make
it make it
even and then
slightly press down to make it slightly
flat right so that is the uh
original handle with a coil and then um
you just get
a hand roller and you roll from one
side all the way from the bottom all the
way so you kind of slightly tilt it so
you will have thinner edge and a little
bit thicker in the middle that's the way
I prefer my handle to be
and just keep on rolling it until you
find that is the right
width and make sure that the little
uh ridge on this center is
even if not if the edge is not even you
can slightly bump it
on the bed to make it
even okay so that is the handle that I
usually use for my mugs
originally since there's no water so you
can just let it dry like this
way so I leave it hanging like this
before they firm up further and I will
attach them so I usually do this before
I trim my part so once I done with my
trimming they are about the same
brightness and that way I can attach
it so I'm going to keep on making more
[Music]
handles cuz I have a marks waiting to be
trimmed
[Music]
[Music]
all
right so pretty good i roll all my
handles and let them sit like this way
before I attach them the open air it
will let it dry more evenly and uh when
I'm ready to attach the handle I just
cut cut down the section and then attach
to the
body here is the uh finished piece that
I use the same method to to make the
handle
so that just to show you that is very
easy way to make them
[Music]
