Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's video
game back with another really cool
arcade game video for you this is a
repair video I don't know how long it'll
be but we've got this game that's been
sitting here in our shop for quite a
while
it is a Williams 1976 I believe Spanish
eyes pinball machine this is a one
player and it's in kind of rough shape
so we're gonna fix it up and see what
happens I don't know how much cosmetic
stuff we're gonna do to it yet but you
can see the back glass has some issues
so we're gonna see if we can repaint
some of that I said there's even a crack
in the back glass we won't be fixing
that the playfield is in pretty good
shape but it's got a little bit of wear
around the pot bumpers but it's pretty
clean you know it ain't too bad the
cabinets faded I don't know what we're
gonna do about that yet but I just
started working on it and we're we've
gotten to the point on these old e ends
like this that we don't even plug them
in anymore because you know they don't
work so we're gonna go through and clean
them up a little bit first this is the
back the head box I figured we'd start
back here it's a little dark so it's
kind of hard to see but we've got these
score reels here you got to get them all
cleaned up where they're working good
and then you've got these stepper units
here this is see what they're calling
this this is the match unit here see the
little spider the show on there and then
on this side we've got a little dark but
we've got a coil here that's got some
brown marks on the wrapper it's a coil
maybe burn up or it could just be that
it was locked on but basically to get
these things working you need every
connection working being clean and then
closing and opening state whatever
changing state whenever it does its
thing so basically on something like
this a stepper unit whenever this coil
pulls in it should move this
bihter on the other side as you can see
maybe it's not moving too good it's like
yeah I'm pushing it down with my fingers
move and they've got this spring here
that they've stretched out so that needs
to be all rebuilt this is the ball count
unit here so this is the same thing on
this side you can't really see it
because it's dark but there's another
spider over there
and basically whenever this pulls up
look whenever this coil over here pulls
up that should move and it actually did
move so should step up one step each
time and so basically all these little
fingers on the spiders connect different
traces together which make different
wires connect together which is it's
basically an archaic computer that's how
they work so basically you need all of
these to step up each time the coil
pulls and then whenever the other coil
pulls to reset it it should either reset
back to the beginning or reset back one
step however it's designed to work and
then of course all of this has to be
cleaned too so that whenever the finger
touches the metal that it conducts
electricity so you've got to clean
everything and oil it and get everything
adjusted just right where it it touches
everything right and all that and then
down here you've got some relays I've
already cleaned and adjusted these these
are better I don't think they're I don't
think they're mark and the paper
probably fell off of them but you're
looking at like the one point relay at a
ten point relay the 100 point relay the
thousand point relay and then this might
be a reset relay whenever you start to
gain the reset relay goes in and it it
resets all the scores and resets all the
bonus things on the the main play field
and so right here is the credit unit
these aren't as important because I
usually put them on FreePlay but
basically this does the same thing when
every starter you put a quarter in it
ratchets back one way and then whenever
you take a credit off it ratchets back
the other way so you have to get this
basically doing the same thing every
time this coil goes in you should see
that will go up
it looks like it may be always maxed out
when every time this one goes in you
should see the wheel go back the other
way
so it ain't working right we got to go
through that and then another little
thing that you've got is these these are
called Jones plugs they plug in right
there and it's a way to disconnect the
head from the body whenever they're
transported and anytime you have a
connector anywhere on a game that's
always a weak point you could have
problems there so I didn't clean this
side yet just to give you an idea more
older than this in the light here so you
can see all right how corroded those are
that's just oxidation from just sitting
you know this thing's 40 years old so
you can see just how it's all gummed up
so on the other side I've cleaned it you
can see you get it nice and shiny like
that and it makes good contact so that
one is how it should be and that's how
this side is that's how the other side
was before I cleaned it and send this
one here I've cleaned both sides you can
clean it with like a wire brush or some
sand fine sandpaper or something like
that and as you can see I didn't clean
the inside of them because it doesn't
touch anything so it's not really all
that important but the outside a little
dark so you can't see but these things
are kind of like C shaped so they touch
the sides and the outside post it'd be
better if you clean the whole post but
it's just harder to do the inside of it
and then you've also got similar things
here these are two open get to focus
you've got these are settings - these
are like little just individual posts
that's to set your high score you just
put it into place if something like this
is dirty basically your high score won't
work I mean you're winning a free game
for the high score won't work and then
you get this here which is a it says a
number match adjustments on
and so this little thing is a small
Jones plug if it's on this side you're
on if it's on the side you're off and
then the over here you've got another
connector which I have no clue what that
is I just pulled it off I have to find
the thing it's just a little jumper
it appears that connects a couple wires
together so I'll have to look in the
manual to see what that even does it may
have to do with changing from three ball
to five ball but this is just the back
of it I just and this is a one player
which is very simple so I figured I just
shoot a little video showing you count
on what's going on and it's as found
state so once we clean all the joints
plugs once we clean all the relays and
adjust them once we clean and adjust the
the credit wheel once we clean and
adjust the ball count unit once we clean
and adjust the match unit we can go down
to the bottom of the cabinet and look at
that so what I'll do is I'll get started
on cleaning all this stuff and then I'll
film a little video once we get done
with it alright folks got a little more
light on the situation
I figured I would show you how the score
reels work this one here I haven't
messed with yet this is how they
typically look when you get them in lots
of dirt you can see there's a little PCB
board down in there that gets a ton of
gunk on it basically a problem that you
see in a lot of these is that they put
lubricant on it and then it dries up and
gets all gummy and greasy and dirty and
it makes it where the contacts don't
connect and that's on everything you see
whether the worst possible thing you can
do to a pinball machine or basically
anything electrical is spray wd-40 on it
wd-40 is fine for some things but it it
when it gets old a couple years old it
just turns to almost glue so I mean it's
don't put Beauty 440 on it if you're
gonna put some kind of oil on something
use like a a like a three in one oil or
something like that some kind of machine
oil it'll be a real light oil that
almost feels like water but if you put
wd-40 on it it's convenient to spray in
there and all that
but after a year or two it just turns
into complete yeah yeah anyway so here
I've redone this one and reassembled it
now my strongpoint isn't cleaning you'll
see there's still some dirt on the
inside of it and everything I got the
outside cleaned up pretty good and
basically the way these work if you look
at see those three I'm trying to situate
it where you can see it well these
little switches here basically when the
coil pulls in this plunger here
it makes the wheel spin which changes
where the little contacts are touching
on this plate here which is only used
for the match this little PCB board and
again this is a Williams machine they're
slightly different than the other ones
but they'll work about the same this
plunger pulls in like that and then
whenever it releases it pushes the score
drill up one more and so you need to get
it where it's doing that really and what
it does it doesn't really fast so it's
like this every time it's doing that
it's pushing it forward one and it
should click into place you know it
shouldn't be able to go past where it's
supposed to go so that it lands on the
correct number and so basically we're on
three right now so we'll spin it around
four five six seven eight thrown eight
when it gets to nine it presses the nine
position switch if I can get it lined up
where you can see it well well okay
there we go the bottom one's gonna watch
when I go to nine look miss hard to do
with one hand
look I didn't press it watch when I get
to that okay so here's nine see how it
made the bottom switch connect that's
the nine position switch and the reason
it does that is because the next time
that you get like to say it this is the
one point real the next time it pulses
one point since that switch is connected
it'll also point pulse the 10 point that
switch is connected over to the next
score rule
so on the next one whenever it goes
through gives you one point which will
change the nine over to zero and then it
also it also pulses through and gives
you one point on the ten real which will
make the zero go to one on the 10 row
which gives you ten points and it all it
it sounds real complicated but it's
super super simple it's all on and off
it's all real simple logic it's just it
looks complicated because there's so
much stuff
hundreds of switches but they're all
either on or off it's very very simple
the other thing that happens when it
gets to zero is it gets to what they
call home position so see how all three
switches are connected right now watch
when it finally goes over to zero when I
let go this now they're all open and
that's how it knows when it's at zero
whenever that top switch maybe the
middle switch I don't know but one of
those switches whenever it opens it
tells the basically the the reset relay
that it's at zero I can't remember what
the other one does
but anyway it's just logic and so
basically whenever it's going anything
but one I mean but zero the top two were
closed and the bottom ones open around
five six nine makes it make the bottom
one then zero opens them all up so
basically if you get it where it's doing
that reliably your score rules are going
to work really good the Williams score
rules in my opinion that were pretty
well done they work really well
sometimes you'll also get where the
wires are broke where it's soldered one
of these lugs or where it's soldered
onto the switches that we were just
talking about here
sometimes those wires will break right
on the solder joint so if you run into
that that's a problem but they're pretty
pretty reliable the Gottlob ones
depending on the year some of them are
really good some of them are horrible
the ones from the from the late the
lates
the late sixties multiplayers
I had some of those and just they were
just a nightmare they had a lot of
problem
where if the switches didn't connect
good enough that it wouldn't it wasn't
reliably like if it was supposed to
pulse for four times it might only pulse
two or whatever but uh well I guess it
would be five it was supposed to post
five times it would only post three
years something like that it just and it
had all kinds of problems with the how
the switches were adjusted on the
playfield
now that the score rules wouldn't turn
quite as good as they're supposed to and
but yeah any of them you can get working
well again the Williams ones in my
opinion are pretty easy to work one and
the Bally ones in my opinion we're
pretty easy to work on but they change
the design a little bit depending on the
year as well so these are the late 70s
Williams score reals pretty simple in my
opinion they're all they're all pretty
simple design about the same but some of
them just don't step and reset as well
and some of these relays you will have
all in some games where they have a
different throw they they don't go in as
far as such you have to have the
switches closer which is kind of
complicated I'll see if I can show you
that as well you might not be able to
see enough contrast there to tell let's
see if one of them shows up well well no
I have to do one in the bottom or
something where you can see a little
better but basically whenever this relay
pulls in whenever it since power through
the wire here - or this actually grounds
it but whenever it engages the relay
basically this little blade goes in and
it pushes the all of the little
connections together so they should be
open and in close whenever that goes in
or if it's already closed it should open
when it goes in it should just each
switch should reverse state and that's
kind of tricky to understand but once
you get it you kind of go oh and then
you don't even really need schematics
you can just go through and make sure
everything's changing state and if
they're conducting well and if you get
everything clean it'll work well here's
the stepper thing that we were talking
about you can see it a little better
with the light
and there's that burnt coil we were
talking about you see a little better
with the light so I'll keep working
through this and we'll come back and
film a couple of other things here in a
minute oh right I went ahead and cleaned
all of the score reels I haven't tested
them yet because I still haven't plugged
the machine in but I've got all of those
clean I've got the Jones plugs clean and
plug plug back in I've got all of these
relays clean so now all I've got left is
the the credit wheel here the replay
unit they call it in Williams the ball
count unit which is very important let
me back out a little bit credit unit
walkout unit and then this is the match
unit I just took it loose because it was
the next one I got to him because I was
curious about that burnt coil how that's
all burn up that doesn't necessarily
mean that the coils bad it could just
mean that the coil got really hot
because it was energized a lot so what I
did was I looked in the schematics and
way this thing is wired there's a orange
and red wire that comes off of it
basically this match unit it's just kind
of a thing that they use to try to make
a random number basically so basically
every time you score 10 points this
steps up and it makes that little metal
thing on the other end hit the bell
every time score 10 points though and
that's how it gets kind of a random
number for the match and some other
things that run through it that's why
it's got so many wires on it but the
only way that that fires this orange
wire here comes off of the 10 point
relay I said earlier the one point relay
there isn't one in this game it has a
fake first player real so that all the
scores are at least 10 points so this 10
point relay whenever it's connected it
goes together and it's supposed to make
that fire since that's all brown and
that's not even connected the problem is
is that the coils shorted
I mean we don't know that the coil
shorted until I checked it but then I
checked it with the multimeter and
you're only getting 0.2 ohms resistance
across it you should get it on any coil
you should get over like 2 ohms most of
them will be up around 8 or 9 ohms but
since it's got less than 1 ohm what that
means is that this thing is actually
burnt up and the wire is almost a dead
short inside of it so that coil there is
gonna have to be replaced if you turn on
the game with that bad coil in there
it'll probably just lock on and stay on
although it it may not an EMI can't
remember since that other wires not even
connected except to the thing I don't
know but it's bad news it'll have to be
it'll have to be replaced it's
interesting though that it's not locked
up and it's still the plunger still able
to move in it so anyway so that's that
I'll show you the other side since you
can see it better now since I've got it
removed so basically those that little
spider there turns around and touches
everything and you can see all of the
grease I was talking about on the tracks
that's some kind of lubricant somebody
put on there and it's gumming everything
up now so we'll get that all cleaned up
I'll find another coil to put on there
and we'll get it where it turns really
well alright folks I took the credit
unit out this is basically what shows
you if you've got a quarter in the game
or a dime or whatever it is you can see
this little window here on the front
that's what you see through the back
glass right now it's on one credit so
when it is you've got this big wheel and
each each manufacturer is different but
they're all similar I've got it kind of
carefully perched up here you can see
they called it the replay unit in the in
the Williams games so basically this one
here and notice it also has some brown
marks on it but I think that's just I
don't think this one's burned up we're
gonna go with that for a little bit
but basically you have this wheel here
and on the other side it has the wheel
with the numbers so basically when this
one goes in it adds a credit which moves
this wheel this way and whenever this
one goes in it takes away a credit which
makes the wheel go this way and so on
the front you can see how many credits
you have and as you saw we have one
credit right now you can see on this
wheel this little post right here and
then another little post right here
well we're on one right now and the post
is awfully close to these little
switches here if you look really close I
don't know if the focus is gonna allow
you to see it hard to tell from your
vantage point but essentially these
first two blades are touching and then
right past that there's a blade it's
really close but it's not touching it
and then this this big blade extends
over here to beyond the post and then it
hits this little white piece and if you
see at the end of it there are two
blades touching right here so each of
those switches has a wire solder to it
it's doing different things so basically
whenever right now we've got one credit
so if I hit the start button it's gonna
take away a credit and what it'll do is
it will move this post over by turning
that wheel and when it does this switch
will move just a little bit just enough
to take where it's no longer connected
to this and now it's connected to the
next one and at the same time that white
spacer will open up these two switches
here so that they're not touching
anymore like that it's just barely cuz
it's just gonna move a little bit and so
when it does that whenever this switch
and this switch are no longer touching
sound now if I press them they're
connected together there's tension on
them they're electrically connected
whenever I take off that one more credit
it's gonna say zero right and it's gonna
open up that switch so now if you hit
the start button it won't work because
the switch is open
if you add another cornerback in this
post will move up one little spot to
where it is now and we'll connect it
back together to where it has a credit
on it so let me see if I can get it to
move without breaking something so every
time you hit this every time this coil
gets pulled in it's because the game
just got a credit in and it turns that
turns that wheel there all right so now
if you go around to the front we were on
14 credits which is the other extreme so
I'll show you I mean about three more
hands here to show you all of this okay
so now remember these are our switches
that we were messing with that tell you
that you're out of credits whenever you
get to see room and see this bar has
moved all the way over here now so it's
nowhere near it so each time you take
one off 13 12 11 10 9 8 7 6 5 4 3 2 1 0
all right but if you look on the other
end there's a bar over here and wouldn't
you know it that sneaky little bar has
went around and it's opened up this
switch see how they're not connected
anymore the reason that it did that is
because they don't want you having more
than 14 credits that's what this
particular ones settle now you can take
that out and move it over here maybe
maybe if you put it in this post now you
can get up to 20 credits or whatever but
whenever this switch opens it no longer
allows you to put a quarter in the game
whenever you put it in the quarter will
fall back out or if you win a free game
it won't go up because this is open so
that's how it works so I've got it I
cleaned it up a little bit and I've got
it where it's inked remaining and
decrementing
I believe those are the words properly
said if this wheel is turning how it
should and I owed it a little bit and
got it doing its thing so it will bolt
that back in and onto the ball count
unit alright folks I think we're done in
the back here I have rebuilt those five
relays I didn't rebuild them I just
cleaned them and adjusted them and I did
rebuild the score rules and I cleaned
off the Jones plugs and these other
little minor Jones plugs
I left that coil in there because I want
to see if it locks on whenever I turn it
on so we'll see about that but I've got
this off stepping up like it should
every time that coil goes in or the
actuator goes in it steps up you can see
we've got it nice and shiny on the pads
they're rebuilt the replay unit there so
that it steps up and down like it should
and then finally rebuilt the ball count
unit so that it steps up and down like
it should it was a little bit of an
issue it was kind of hard to figure out
this one over here steps it up if you
look at the look at the spider there
you'll see it go up okay and then this
one steps it down and I was having a
problem where it wasn't stepping down
it's got this weird little ratcheting
mechanism here so that it only moves one
and so I was having all kinds of issues
and I couldn't figure it out I finally
figured out that what happened was the
previous owner had worked on this and
there's a little screw right there see
that I had to add that there it is I had
to add mmm need some focus here I had to
add that bolt so that that plunger
doesn't come all the way out because
that's how it's supposed to be that both
was missing basically they had taken it
loose you can see there's one on our
little burnt coil there too
that boat gives you an adjustment so
that you can make it where it does the
ratcheting action properly with these
little bars and things so that one was
missing I figured it out finally put it
in adjusted it and got it where it's
resetting and stepping up and stepping
down so you know what that means
that is it for the back of the cabinet
so I'll move this back up against the
wall now you know after we get it run I
still haven't turned it on so after we
get it up and running they'll probably
be adjustments that I have to make but
uh coming around here to the front you
can see the back glass so I've got
everything on one right now so that
whenever it resets I can just make sure
that everything is resetting fine and
everything in our credit wheel is
showing through that window so our the
next thing that I'll do on the next
video
is we'll work through the bottom of the
cabinet so things will have to mess with
here is the score motor we've got a lot
of relays over here that are keeping
everything running we've got fuses of
course more Jones plugs even more Jones
plugs and then we've got the bottom of
the playfield and all the all of the
mechanisms that make the playfield work
and then we've also got this reset bar
over here always fun so we'll do that
next time I will see you on the next
video