Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
okay we're back here in one of our
maintenance rooms and this is evapo rust
comes in a jug I think you can get a
Lowe's but basically it evaporates rust
so we've got a bunch of parts from the
playfield that are crazy rusty we're
probably going to order new ones of
these because they actually make these
we're still have new old stock ones of
these and these actually even still have
decals on them that you can see they've
just got rust all over them
so we're going to throw all kinds of
stuff in this evapo rust and see which
parts it saves and which parts it
doesn't so all you do is you just
immerse it in the stuff
and we're gonna put as much rusty stuff
as we can put in it and then you leave
it on the instructions that says between
an hour and 12 hours I haven't found
that it messes it up if you leave it too
long but we're just gonna leave it in
there till tomorrow sometime pull it out
and see if it's saved any of our parts
so we're going to dump in all kinds of
screws down all the metal stuff that we
can fit in there the stuff that's bigger
you can actually spray it with it and
wrap paper towels around it and stuff
but you basically just have to keep it
wet on it so all of the smaller pieces
are all going to go in this and we'll
see if it saves any of them and then
we're gonna put together a list of all
the stuff that we need to order to
replace whatever is not usable
this is the product here we've used this
before and it stuff's pretty amazing
which we'll see we'll see if it is
because we've got some really nasty
rusty stuff so we'll see if it saves any
other there's the instructions if you
want to pause it and read any of it but
you can probably find all this online
works great on rusty stuff little
expensive though so here are the Freddy
parts I've actually left them in there
about a day and a half so it's been mmm
let me think
maybe a little longer than almost two
days it's been about 42 hours so what
I'm gonna do is this is just the first
batch and we'll do some other stuff too
but what I'll do is I'll pull these out
and then we're gonna rinse them off with
water I don't wanna get the water in
this stuff though the evapo rust because
you can reuse the evapo rust it's pretty
cool stuff but I'm gonna pull those out
and then you're supposed to rinse them
so I'm gonna rinse each part off and put
them in this bucket and then we'll carry
them out to the we'll carry them out to
the front counter so you can see them
I'll pull one out though just to show
you kind of where we're at this was that
scoop thing it was pretty nasty
see here so
I say yeah that's pretty nice let me
find those weird little rounded things
that were so she see if they this part
here you remember it
and cleaned up pretty good but it's
probably a might still not be usable
yeah this thing this thing was destroyed
you can see it got most of it off but
it's still kind of rough so we'll
probably order one of those but but I'll
clean it off I'll rinse it all off put
it in the bucket
take it out front and I'll do a little
video so this is what we came up with we
pulled it all out and we rinsed it off
and then dried it off and laid it on a
towel so a couple things I don't I don't
know if I got a great good enough
picture of how these were before we put
them in but they were really bad as you
can see the pitting is still there
because that's damaged that was actually
done in the metal but the actual rust is
gone so it's gotten rid of all of the
rust now on the bottom side they look
really good
these two pieces here were really bad I
mean they had rust all over and you can
see that it didn't even damage the decal
so it made two more they're probably
usable like that but these particular
pieces are pretty inexpensive so I'm
just gonna read by those all of this
stuff that is like the ball guides look
at that it's got like a mirror finish
again that's all completely usable in my
opinion now it's not perfect you know if
this was a collector's quality machine
you wouldn't want that on there but man
throw up at the top of the playfield I
mean that looks great
this piece here goes right into the Elm
Street house that we're going to have to
remake and it's pretty damaged you know
it's pretty pitted so I'm going to
replace that because you can get that
brand-new still this piece here is what
holds up basically the Elm Street house
and it you know look at that I mean it
cleared it up really well so one thing
about it though you can see on the back
it's a good example mirror finish but
look that one is black like it's it's
not even chrome anymore and see that
it's just the one piece so I think what
happened I put let remember I left it in
almost two days I think what you can see
on the front it's similar I think what
happened was if the pieces are like I'm
no expert on plating but if the pieces
are like chrome-plated it cleans them up
really well
I believe that piece probably was just
it wasn't plated so it was played at a
different way so maybe it was like zinc
plated or something again I'm no expert
but it actually messed it up it turned
it like a dark color this is another
good example this one is the piece that
supports the well I got that right let's
use this one this one is the piece that
supports the ramp it goes up in the top
and the left and it's the same thing
it's not plated maybe it was zinc plated
or something like that and so what it
actually did it was discolor it but it
rid of all the rust too so on all of the
the bright work we'll call it look at
that completely saved it so we can reuse
a lot of that stuff all of the screws
similar it got rid of all of the rust do
you see any rust I mean it got rid of
everything but they're not all bright
and shiny you know but look at these
like these posts these things were
horrible and at rust all over them look
at that clean them right up so those I
think are reusable some of the stuff
like these acorn nuts maybe we you know
you put new ones on that because they
don't cost anything but you can see on
these screws it cleaned them they clean
them up got rid of the rust but there
they're not some of them aren't shiny
anymore and you get things like that
going on so if it's not a place where
that matters you might just need to buy
new
all of the rails it cleaned up pretty
well I'll show you one of these you can
see how from a distance it looks nice
and bright and shiny much better than it
was but if you get it real close you can
see that it's got little pitting and
it's slightly damaged yeah there there's
a good that's a good picture so it's not
perfect but for what we're working on
folks it's pretty decent it even cleaned
up some of the ones like this where the
screw had broke in half as I was
removing it because it was all rusted
together look at that and since it's a
chemical it gets in all the cracks and
everything so in my opinion that's some
damn good stuff this was the most
important piece for me really because
these things are like 30 or 40 bucks for
a replacement one look at that they
cleaned it right up completely usable
and saved the decal crazy and I even
left the pad on and it didn't remove it
didn't destroy that that's actually
usable the way it is right now it's got
a little bit of water in it you can see
in there didn't clean all that up but I
I'm not so sure a brand new one is all
that clean in there so this goes about
you know halfway up on the left side
something like that looks great I'm
gonna use it definitely gonna use it oh
and one other thing the black the part
was a couple places went black like that
I did have these in there which are I
don't know what they are but you know
they were these were black and now
they're not quite as black so maybe the
whatever was on that is now on that I
don't know we're talking chemistry here
folks I don't know much about it but I
know one thing dump this stuff in evapo
rust and it'll make it look a lot better
now you could probably take all of your
screws and stuff and put them in a
tumbler now and clean those up but I
don't have one of those this is also a
really bad piece
this was up in the top corner and was
just coming apart and I just threw it in
there it got rid of all the rust but you
know all of the damage is still there of
course I even threw like a coil stop in
what can I say
it's good stuff so I've got it back
there and now I'm working on a rapid
fire and I threw a bunch of parts from
the rapid fire that were just completely
disgusting in there so but all the
Freddy stuff we're going to we're going
to put all of the chrome stuff in that
we can that we can get in there we've
still got some stuff left of course this
is all the stuff that we pulled off of
it the ramp we're going to try to maybe
submerge part of it and then I don't
know how we can submerge the middle but
maybe submerge that end and then
submerge this end and then clean the
middle the best we can something like
that you can see this was the ball
trough thing you can see the just the
rust on it that's the that's in general
about how the other ones were and this
is a great example
so this brightwork here look at this I
mean these ball trails look at that now
that part there were they we're just
were rusted through probably not gonna
fix that that's the one I'll be on there
but you know most of that rust it will
probably get rid of it and then one of
the worst parts was this Freddy's head
this is like the bracket under his head
of course all that's so damaged you
can't fix that but if this cleans up
really good by putting it in that stuff
it may completely be saleable because
it's not you can't see it it's it's
under the head but you don't want the
thing filthy and rusty like it because
the ball goes through there so but if
you can get it where it's cleaned like
the other stuff is completely usable
so we'll put some more stuff in there
and keep working through it
yeah I'm pretty pretty pleased with that
stuff you've app over rust so I still
have more metal to do and I went and got
they did they didn't have any vApp
arrests ever sold out because it's on
sale for like seventeen dollars and so
then I went to Lowe's and got this wd-40
rust removers soaked which is basically
the same thing I don't know if the
ingredients are the same but it's
basically even in the same type of
gallon jug someone try this stuff I'm a
port in a bucket and then I've got this
this is the trough piece of the pinball
machine you can see it's got rust all
over it but I think this is gonna be a
good one because I can't submerge the
whole thing so what I'm going to do is
I'm just gonna put this half in it and
then you'll be able to you'll be able to
see whenever we get it out how well it
did so I'll get real close to it so you
can see down at this end the pitting is
about the same as it is in several spots
on this end but there's even a little
piece of brass on it so I will I'll put
this in a bucket and then we'll go back
and we'll check it periodically and we
can time it and stuff and just see how
it see how it reacts so we're using a
different bucket this stuff is actually
clear you can see right through it
pretty easy the other stuff the evapo
rust had kind of like a yellowish tint
to it so as you can see this is we've
got other stuff in there but this is the
trough thing that we were talking about
the top three inches or so of it is
sticking out and then it's completely
submerged under that so I'm gonna it's
been about two and a half hours so I'm
gonna pull it out and we'll see what
kind of shape it's in okay so it's been
two and a half hours so this end is the
end that wasn't in you can kind of see
some lines there where it was in and
then you can see it's removed most of
the rest are still some pitting and a
little bit of rust I guess like that
still looks similar but it's definitely
getting there so what I'm gonna do
as I'm gonna put it back in for several
more hours and then we'll see and again
this is the wd-40 stuff so I'll pop it
back in let's see if we would get okay
so here's what we ended up with your
stop with the other end in as well it
didn't you know there's a little bit of
it didn't clean it up quite as good it's
definitely much cleaner and much
brighter but it didn't clean up quite as
good as I thought it might this piece
was filthy and we put it into this
entire end was just covered in rust and
now it's all gone so I don't know it
seems like it works pretty good on some
pieces and doesn't on other pieces but
it definitely clean this one up enough
that you can use it these chrome pieces
the ones that are chrome plated like
this it cleans up really well you know
if there's damage like that of course it
can't fix damage this one was rusted so
bad that the weldment had broked so it
seems like if it's chrome plated it
cleans it up really nice like that but
it's not chrome plated it doesn't clean
up is nice so I don't know if that's
zinc plated or it's just a different
level of chrome plated down on line but
there you go that's what it looks like
so I hope you enjoyed that try to stuff
out I definitely like I think I like I
hate to throw anybody under the bus this
is the wd-40 stuff I think I like the
evapo rust stuff a little better it's a
little cheaper and it works as good or
it may have worked a little better and
also the wd-40 stuff on the back of the
can it doesn't say anything about
reusing it or anything like that so
they're not making that clean but the
the evapo rust stuff I know you can
reuse over and over again because we've
done it
and the evaporite has kind of like a
tint to it it's kind of a yellowish tint
to it and the wd-40 stuff is more clear
looked more like water but so I think I
guess the the I figured they were
probably the same exact formula but I
guess they're not but either one I'm
worked pretty good you can get the wd-40
stuff at Lowe's you can get the evap of
rest stuff at Tractor Supply and places
like that or you can order it online I
would go with the evapo rust if it was
me
but if you can't get your hands on that
the wd-40 stuff works pretty good too
so we're back here in a back room again
and the ramp is gonna be a problem
obviously so we're trying to figure
we're gonna dip you know the end of the
ramp is the most complicated anyway so
we're dipping the end of the ramp in the
solution we let the all-mighty
and
we'll check out the results look at this
the end is pretty good and then you can
see where it wasn't submerged look at
that look at the difference I think
that's probably the best example we can
give now it's not completely cleaned up
but it's pretty freakin close by the way
this is the wd-40 stuff and I was
we both seem to do the same thing but
look at that
so now we're gonna rig it up with maybe
put it in a different type of container
where we can get it more submerged and
then the parts that you can't submerge
you can you can take a towel and wet it
with the stuff lay it on the item which
is what we're gonna do here in the
middle and then wrap it with plastic to
keep it wet and the it'll it'll work as
well at least that's what it says and
they have a bow rough stuff so well I'm
very pleased with that so we're going to
keep working through it just see how
much of this
we can get
the liquid on one way or the other so
here's the wire ramp you can see this
end I was able to submerge in that
bucket and it got it really nice and but
then once it was out of the the part
that was out of the bucket you can see
it's still all screwed up obviously in
the middle and then the same thing on
this end the part in the bucket got
really nice but up where the fluid line
was the part that was sticking out is
still screwed up so what I'm gonna do is
pour it back in this bucket if I took
this just so it'll be submerged and
should work great look at that then
we'll have that part underwater then the
only part left will be the middle flat
part which I think I can do with rags
and stuff so so we're gonna transport
our chemical into this new just new
bucket there you go leave your comments
below let me know if you what you think
and if you've used it before and we'll
see you on the next video