Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game repair video we're
going to film for you we got in a while
back this super cool Midway space zap
arcade
game and we're going to try to fix it so
we figured we'd film us trying to fix it
so I don't know anything about space zap
never had one never played it it's got
that the cabinet is very similar to a
wizard of War
cabinet um
just it's not exact or anything and you
know wizard of War doesn't have any of
this but it it just has that vibe to it
to me and uh it was made right around
the same time and it has the card system
in it uh where the motherboard is a
bunch of separate little cards it's the
same motherboards that were in gorf so
gorf wizard of war and space zap there
may be a couple other games too um but
look how cool the cabinet is just has an
awesome look to it so we'll take the
back door off look inside of it and see
what we got going
on okay so the back door is removed and
inside we have that looks like a Wells
Gardner monitor to me that's the that's
the similar it's a black and white
raster monitor just like what's in uh
like Space
Invaders so we should be able to fix
that and then down here in the bottom is
the rack that the cards go in but
there's one card missing I don't know if
bace zap uses all of the cards though it
may not so that you've got the uh a card
on the edge with the board with the
wires connected to it then there's two
big cards and two smaller cards the two
smaller cards I think are Ram cards um
so the first thing I'm going to do is
I'm going to look in the manual and see
if we're missing a card if we're missing
a card that'll be fun to track down um
but it may have just been made like that
so let's go check on the schematics
okay so I'm looking on the schematics
online and if you look you can see that
there are in fact only five cards um
they just have them in kind of a
different place theyve got they don't
have a gap in the middle they got the
one over this way more so we've got all
of the cards it looks like so the next
thing that we need to do is check out
the power
supply okay so what we did was we
unplugged the power going into all of
the racks because the only problem that
you could potentially have when it comes
on really is if the power supply is
screwed up and sending too much voltage
to the board it might blow everything
you know um so whenever we turned it on
uh the monitor actually came up if you
look closely see the orange neck glow on
the monitor so it's at least trying to
work um and I was just getting ready to
check the power supply so these are the
voltages coming off of the power
supply right so there's this little
connector down
here and so I'm just going to check all
of those
with the multimeter and we'll see what
we
get so amazingly the power supply is
actually still working but when we turn
it
on we get a flatlined monitor so there's
no vertical deflection so if you had a
line smashed this way the long way that
would mean there's no horizontal
deflection but since it's smashed this
way there's no vertical deflection but
there is a little bit so it might just
be an adjustment or something
um but there's probably something wrong
with the monitor so uh the next thing
we're going to do is see if if the
game's up and
running so when you put a credit on it
nothing happens so the game board's
probably not running and the um the uh
monitor isn't
working that's always
fun so I tried adjusting the vertical
size on the monitor can't get it to do
anything different but we do have
something different if you put the game
in test mode it looks like it tries to
do some kind of test thing and then um
you get some screwy stuff on the screen
so I think the first thing I'm going to
do is try to get the U deflection
working on the monitor um and then we'll
see what the image looks like on the
screen and then we'll work through the
board
set okay folks so here what I here's
what I was able to get after um
recapping
the deflection board on the monitor uh
it still didn't have vertical deflection
and um so I replaced some transistors
and I think it's a transistor that's
kind of rare called a
p um programmable something
transistor um so I have to order that
but I actually had a
another complete monitor that I was able
to cap the deflection board off of and
put in here and it's exact same
thing and at first glance it looks like
it's still screwed up but if you look
really
close um let me turn off the
lights isn't that one of the best parts
of my videos when you get to go with me
to turn off the
lights so if you look really close on
the
monitor the top it looks like all of the
color is just a piece of plastic that's
laid over the monitor that's not it's
not creating that it's just making a
white screen but if you look what it's
doing is it's drawing in half of the
screen there you go see the lines it's
drawing in half of the screen and then
the other half has these horizontal
lines it doesn't have it all the way
drawn
in so I'm sure that's some kind of clue
as to what's
happening but I'm unaware of what
exactly that would mean so I'm going to
have to do some research and see if we
can figure it out but um it looks like
it's doing some kind of startup thing
and it's not finishing let's see if we
turn it off and then WR back on if you
can see it drawing them in I don't know
where the power switch
is all right I can't tell if you can
still see it but I've got
the okay yeah we're getting something
different now
so that seems like some kind of ram
thing to
me that is drawing just patterns and
things so I'll do some research on it
and we'll see uh if we can figure out
what that
means so looking in the manual the old
manual from 1980 October 1980 it says
Ram ROM test space app placing the test
switch located on the audio amplifier
assembly in the coin box area to on
performs the following functions one it
removes all accumulated credits we
hadn't accumulated any credits two it
tests the screen Ram three it tests the
static Ram four it tests the game ROM
eom five it repeats all tests
indefinitely placing the test switch in
the off position Returns the game to
normal operation after completion of the
ROM test if you were to turn the test
switch off during the screen Ram test it
would take approximately 15 seconds
before the game would do would reappear
the game does a modified form of ram
test upon Power Upper whenever the door
slam switch is activated if an error is
found the program continues the test
until the error is cleared therefore it
is possible that the game will never
start Andor there may be no indication
of anything on the screen if there is a
ram error if all RAM and ROM are good
the only indication will be an
occasional flash on the screen
approximately every 16 seconds this
indicates that it's passed all test and
is starting the test sequence over again
if an error is found in the screen Ram
you will see the flash on the screen
followed by flashing random horizontal
bars it will then cycle through the test
again until the error is cleared if an
error is found in the static Ram there
will be short bursts of flashing
horizontal bars displayed on the screen
it will then cycle through the screen
Ram test and the static Ram test again
until the error is cleared the cycle
time is approximately 3
seconds so I put it back in test and
we're getting some variation of what
they were just talking about so the
first thing I'm going to do is I'm going
to test the uh the power on all of those
boards to make sure that it's getting 5
volts through that connector and through
the bottom of that cage and everything
and uh we'll check the power lines and
then we'll I'll report
back all right so the um it's getting
4.92 volts to the board so that's
probably close enough um I'll probably I
can adjust it and I might I'll probably
rebuild that power supply later but I'm
going to try swapping in some of these
Ram cards I've got some extra stuff
laying
around so it sure looks like it's got
bad Ram so I'm going to see if I can
swap one of these in and get anything
different um and uh we'll see if we get
any kind of different image on the
screen or or if that changes
anything all right so I know nothing
about this game I've never played it I'd
never even heard of it before I got this
cabinet um but so I don't know if it's
acting right but I think it is so I took
the uh I took one of the ram cards out
and I swapped in I've had four spares so
I swapped in one of the spares and it
looked exactly the same and so then I
swapped in the next paare and it looked
almost the same but it had a couple
extra lines in it and then I swapped in
the third one and it looked exactly the
same and then I swapped in the fourth
one and it looked all screwed up so I
figured that the second one and the
fourth one were probably damaged and the
first one and the third one were
probably exactly like the original one
so I figured I probably had three good
Ram cards
so then I took the second ram card and I
swapped in one of the ones that I
thought was good and Bam came right
up so it's at least showing signs of
life looks to me like it's running the
attract mode let's try crediting it up
see if we get
anything
um
okay looks like it's playing but we
don't have the s
now okay so your gun is on the right you
hit that and you shoot a up and you
shoot I can tell already I'm G to like
this game this is pretty
sweet all right so I don't know if the
screen's supposed to flash like that
it's kind of cool
but it makes it Bloom and stuff I
haven't rebuilt the power supply of the
monitor yet
though so that might keep it from
messing up all right so that's enough
for Theon night I will uh start back up
tomorrow we'll see if we can uh figure
out the sound and some other things oh
on those Ram boards that are that are
messed up one thing I'm going to do is I
I'm pretty sure that you can download a
ram test chip that you put on the ROM
board
and then it will tell you which chip is
screwed up on the Ram Board so while
I've got it open and working on it I'm
going to try to fix all of my Ram boards
and then I'll have good Ram boards to
swap into like if I get a Gore for a
wizard of war or
whatever
um so we'll do all that
tomorrow all right folks so we are
checking out why the sound isn't working
so this is the soundboard it mounts on
this little
bracket in the front of the
game and we looked in the schematics and
the fuse in the bottom controls the coin
door light I mean the Marquee lights and
the uh
soundboard and so the soundboard wasn't
getting voltage and the fuse was blown
so we put the fuse back in turned it on
bam big explosion smoke
everywhere it was
horrible I barely got out alive so we
turned it right off of course and then
whenever we pull the board out there's a
little Scorch mark because on this
board right down to the bottom is a
capacitor and it's this weird old
capacitor 22 UF I mean I'm sorry 15
UF which we're going to replace with a
22 UF um and it had literally it blew a
hole in it
and the thing is shorted so it's
actually I'm doubt I can do that but if
you
um oh I don't have enough I can't I'm
not dexterous enough to do it but
whenever you check it it's uh there's
like two ohms between it it's basically
it's shorted inside so we're going to
replace that cap put it back on the
board put everything back together and
try it again
okay folks so we put the sound board
back in and that fixed the sound so
we've got the sound doing its thing I'll
play it here in a second to show you we
also replaced the light bulbs behind the
Marquee so that lights up and does its
thing now we're going to do some more
cosmetic stuff um I took
the uh I forgot to mention earlier
before we got it to come up whenever we
figured out that it was the ram card I
took the the chips that were in the
sockets on the boards in there and uh
cleaned all the pins on them and put
them back in and it didn't change
anything then we figured out that it was
the Ram uh card we uh replaced the caps
on the power
supply um that was before we figured out
that the soundboard was screwed up but I
checked all the caps on the power supply
I mean I rebuilt the power supply just
to make sure that the voltage was still
there and we're down to the last
electronic thing that we've got is I
pulled the monitor back out out of
course we had already capped all that
and um there was just a couple caps
underneath the the chassis but there's
this big filter cap here in the back let
me show you that on a lot of these older
monitors they've got these big caps here
that have four different values all in
the same cap and so what'll happen is
let me see if I can get you in there to
see
it there you
go so there's four different values
written WR on the side of that
cap so what it says is
a let me get down where I can read
it we're in the machine people and it's
on doesn't that make it more
exciting so if you look there's four
there's a little diagram that it shows
you on the bottom of the cap where a b c
and d is and a it says is 125 volt 800
UF B is 100 volt 200 UF C is 50 volt 200
UF and D is 200
volt uh 20
UF did I do that right a 125 volt 800 UF
B is 100 volt 200 UF C is 50 volt 200 UF
and D is 200 volt 20 UF um so all of
those values are in that one can and
there's four wires soldered to the
bottom of the can so um what we did was
we took the wire off of each one of
those and soldered it to a brand new cap
and then connected it to ground but I
didn't have the 800 UF one so I had to
order that so I've ordered an 800 UF 125
volt cap to put in there that's used for
filtering um the power supply voltages
so there's one little thing that it's
doing we adjusted the monitor a little
bit better there's actually a pretty
cool detail in that middle piece that we
didn't notice
before but this is our deal see how
whenever it explodes the the screen
blooms it actually gets smaller and then
bigger I don't know if that's by Design
or if that's the
monitor um not being able to handle that
much brightness on the screen so one
thing the only thing that would really
cause that to do that would be the power
supply and so the caps in the power
supply so that I'm waiting on that one
cap that I needed I'm going to put it in
and see if it fixes that
problem and then if it doesn't fix that
problem um I'm going to look online and
see it's it's acceptable the way it is
but I'm going to watch other people's
videos and just see if they all do that
or we'll see when it does it here again
in a
second boy's doing pretty good uh oh oh
he got away oh he got
him he's doing pretty
good he might go on for forever people
you know they always win
eventually here it is boom yeah see how
it moves
sizes I don't know if it's supposed to
do that so I'm going to look that well
I'm going to replace that cap first and
if it doesn't fix that then I'm going to
see if it they all do
that so that's really kind of the only
thing that we're waiting on so whenever
we get that in I will uh
uh film it and uh show you show us
putting that in and then we'll check to
see if it uh if it makes it
better okay folks we did a little
cosmetic work and we got in our 800 UF
cap and put it in and it didn't change a
thing you can't even tell on the monitor
so um we still got to clean it up a
little bit more but uh we've already
actually been contacted by somebody who
wants to buy it so we think it's we
believe it's
sold but I'm going to film a video of us
Planet cuz it's such a cool
game um after looking online at other
videos of people's uh games it looks
like they all do that whenever the the
screen gets really bright it overloads
the uh voltage regulation and it kind of
blooms a little
bit the um they famously did that on
Star Wars like on the Star Wars Vector
arcade game whenever the uh whenever you
blow up the uh Death Star it um does
that makes a big freaking the screen
gets bigger and
smaller but it looks like we're already
here I'll I'll start it just so that
this video is complete and then we can
do a separate one where we actually play
it
[Music]
[Music]
it's kind of it's kind of like Simon
says
[Music]
right oh no they got
me so there you go leave your comments
below oh I don't know if I showed the
middle thing
that has a lot more detail
than when I first filmed it I had the
contrast up so high you couldn't see any
of the detail in it but the little
middle part has a lot of cool
detail so leave your comments below what
you think and uh we'll film a separate
video of us playing
it look I got a new high score
[Music]
people I'm on
a I'm on an all new high people what do
you think about that leave your comments
below let us know what you think about
this thing
uh tell tell us if uh you remember
playing this back in the day and give us
a thumbs up for taking the trouble to
film it for you we'll hope hopefully
this will help you fix your gorf or your
Robbie Roto or your wizard of war or
your space app so um they're all very
similar so leave your comments below and
we will see you on the next video