One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool arcade game repair video for you this evening.
This time we have the original Asteroids,
not to be confused with Asteroids Deluxe.
This is the original one here, 1979.
So I bought this years ago.
I don't even remember where I got it from, but it's been
we had it in storage because we had an we had an Asteroids at the time.
So there's certain games that we always buy.
So we always buy Asteroids.
We always buy Donkey Kong's.
We always buy Pac-Man's.
And so if we have a Pac-Man or a Donkey Kong or an Asteroids
already for sale at the time, it doesn't make much sense to bring it in and fix it.
So we put it in storage.
And then whenever we sell one,
we'll bring another one in and we'll fix it.
So that's kind of why you see us fixing the same games over and over and over again,
because we like the same games.
We know which ones are reliable and which ones aren't.
You know, which ones are easier to work on,
which ones we can get parts for, stuff like that.
But anyway, Ronnie was down in our storage area this weekend
and he saw this one and decided to bring it in.
So I can make you guys a video of it.
I didn't make a video of the Donkey Kong Junior here
because I got this in on trade last week and it really didn't need that much.
All I did was rebuild the monitor, clean it up a little bit.
And here's a Miss Pac-Man I just fixed.
This was a repair for somebody.
I just did this yesterday.
I didn't film it because I feel like I've filmed so many Pac-Man videos.
If you go on our channel, I can't even tell you
how many Pac-Man videos I've made.
20, 30, I don't know.
I'm kind of getting burned out on the Miss Pac-Man and Pac-Man videos.
So I skipped it.
Did a real quick, easy repair, rebuilt the monitor for the guy.
But anyway, back to the asteroids.
So I bought this a few years ago.
And the thing about me is I've got a really good memory
so I can remember lots of things from years and years ago.
So I remember exactly what's wrong with this machine.
It's broke.
I've never plugged it in.
I bought it off.
Who knows? I don't know.
I don't know where the heck I got it.
I don't think I got it at an auction because there's not an auction tag on it.
I must have just bought it off Facebook or somewhere.
I don't know.
But anyway, I think it'll clean up pretty good.
Cabinets got a little wear around the edges.
They tend to do that.
It's been wet a little bit at some point.
It's just a little bit.
Besides here, a little worse, I think.
Part of it is this this black side art that they put on there.
It shrinks a little bit over time.
So it doesn't go all the way to the edge.
But the cabinet is solid, solid.
It's got the it's not an early version Asteroids
because the early versions would have had what they call an owl coin door.
It looks like an owl when you're looking at it and put the coins in sideways.
So this one's a later version.
See how many plays we got on it.
Twenty four thousand seven hundred and ninety five plays.
It doesn't really seem like that much.
See what Ms.
Pac-Man's got on over here.
One hundred and five thousand nine hundred and fifty two on a Ms.
Pac-Man.
We've had a bunch of Ms.
Pac-Man's with two hundred thousand plays on it.
And what do we say this one has?
Asteroids twenty twenty five.
Twenty five thousand plays.
Well, here's what the control panel looks like.
A little cardboard bezel slid around a little bit.
It's got good bones to it.
The marquee is really nice.
The control panel is OK.
It does have some wear.
I don't know if that'll clean up or not.
The bezel's not all scratched up.
Coin door looks pretty good.
All right.
So let's take off the back door and see if all the parts are even inside of it.
I don't think Ronnie would have brought it if the thing was missing
a bunch of parts.
Maybe he would.
Maybe he he would just to mess with me.
All right. Let's see.
All right.
I made it inside the power core down in it.
It's got the game board there.
It's got the power supply there.
It's got the monitor board there.
High voltage unit over there.
Tube is there.
It looks like everything's here other than the coin bucket,
but I don't really care about that because I'm going to have it on free play
anyway for somebody's house, more than likely.
So I'm just going to go for it.
I'm going to plug it in.
I was curious.
I was looking at these screws here.
I don't know why they knew that.
I guess this is loose.
Huh? All right.
I'm just going to plug it in and see what happens.
Never plugged it in before.
Here we go live.
Hopefully it doesn't catch on fire.
Please don't catch on fire.
All right. I had to stop.
Somebody came in
just as I was getting out.
I had it right here and the door chime went off.
I've got a little bell on the door up there that lets me know when somebody walks in.
So I didn't plug it in yet.
Here we go.
Please don't catch on fire.
All right.
Nothing came on.
I think we're hopefully all right.
Now we're going to switch.
Is it going to catch on fire now?
Please don't catch on fire.
The switch won't work.
I don't know. Switch is hard to turn.
Oh, I don't even I don't even have that power strip plugged in, guys.
All right, let's do it again.
Unplug that.
So we're here just in case.
Yeah, I had my Ms.
Pac-Man plug down here right here.
I don't want my donkey gone.
All right.
Let's see.
Still nothing.
Maybe it's the switch now.
Still nothing.
Is the interlock on the door shut?
It might not have been all the way.
Nothing.
The switch doesn't feel very good.
Oh, it tried there for a second.
I think my switch is messed up.
OK, I wiggled the switch.
Now I'm getting the light over there.
I've got neck glow.
Maybe it's warming up.
Got twinkle in my monitor that I see a UFO.
Oh, man.
Starting to warm up.
Yeah, buddy.
I know you guys can't see yet, but you know what?
Yeah, buddy means, don't you?
I can turn up the brightness a little bit.
It's been a while since I messed with one of these.
Let's see here.
Yeah, buddy.
We're going to make that money today.
Got a little too bright because that dot's not supposed to be there.
These are minor details.
I might have to cap it anyway, but
uh-huh.
It's probably about right.
Screen's real dirty.
It's jumping a little bit, but that's fine because I got to rework it anyway.
All of our sounds are there.
You hear the thrust sound?
Fire sounds there.
I was turning.
Yeah, buddy.
Marquee lights working.
So basically, all I got to do is what I call shotgun in this thing.
It's already working.
So now we just got to do a little bit of preventative maintenance,
just a little bit on the power supply.
I don't really mess with these on the AR1s and the AR2s
because they used really good caps.
So the hippie wasn't really talking about the AR1s and the AR2s.
He was talking about like a switching power supply.
So that power supply there is going to be fine.
Our game board's fine, so we don't have to mess with that.
We've got to change the power switch because that one's junk.
And we got to do a lot of work on this monitor.
Basically, all these connections get bad solder joints on them
all along the edge there.
Another one there.
And then the high voltage unit.
There's some capacitors in there.
We got to change a few capacitors on that board.
We got to change.
And then we're down to cosmetics.
This might be an easy one, guys.
You need an easy one from time to time.
So you can see.
I'll show you how messed up this switch is and see.
See how the switch didn't move.
And the game is off.
The switch did not move.
And the game is on again.
So I need a new power switch
and a bunch of solder work on the board
and a lot of cosmetics.
Not a lot, but cosmetics.
All right. So we're going to turn it off and
we'll take that monitor board out, get to work on it.
All right. We got the monitor board out.
And basically all you have to do on these,
if they're working, is you reflow the connections.
All these here and this one here.
Then you change these capacitors.
I'll leave these two big ones in.
I'll just change these over here.
All the smaller ones.
But anyway, this gives me an opportunity to tell you about
what I got in the mail today.
I usually don't do stuff like this.
And if you watch the channel,
you know that we rarely ever post anything like this.
But we get emails every day from companies
wanting us to review something, you know.
And it's never anything that goes with the channel.
Like they want me to review all the,
anything you can think of.
But I don't want to review anything
if it has nothing at all to do
with video games or arcade games.
So I turn them all down.
But this company emailed me
and I thought this might actually work.
I don't know how you say the name though.
Seize Two?
Seize Two Power Tools?
Sesi?
Soldering iron.
Modern model SL1.
So if you watch the channel, you know,
I actually, I love my Weller iron.
This is the one I usually use.
The Weller WESD51.
Love this thing.
Been using it for a long time.
But every once in a while,
I just need to solder one or two wires or something.
I don't want to have to unplug this one from the bench,
take it out there, run an extension cord,
you know, just to do one wire,
even though that's what I've been doing.
And it works fine that way.
But I thought this might be easier.
So let's open this up and see what we got.
All right.
Here is my instructions.
So this is a battery powered soldering iron.
And I think it goes up to, let me see.
I don't want to lie to you.
It's got a, look, it's got a digital readout.
It says 650 on the thing,
but I'm pretty sure I read it went up to like 800.
So we've got the soldering iron.
It comes with a nice solder sucker, it looks like.
This looks very similar to the vampire one that I like.
Feels about right.
I think that's going to be a good one.
Oh yeah, that's a cap to lock it.
A little set of tweezers.
Comes with different tips you can use.
Four different tips, it looks like.
And here's the stand for it.
That's pretty neat.
I guess that just goes in there like that.
Oh yeah.
Check that baby out.
And the charger, just want to sit on there like that.
I just thought it might be handy since it's wireless.
You charge it up.
Now, I don't know.
I'm going to try it out in this video and see how it goes.
I wonder if it's charged, does it come with a charge?
Probably got to charge it first, I'd imagine.
No, it's fully charged.
I better put a tip in there.
It's kind of set up kind of like a Dremel tool almost
with that quick disconnect tip.
Let's see which one I like.
That's a pretty small one.
That's like a medium sized one.
It's curved.
I'm going to try this one.
So without reading any of the instructions,
I guess I just shove it in there like that.
Twist this back on.
I use a Dremel pretty often,
so I'm familiar with the Dremels.
All right, I guess it turns off there for a few minutes
if you don't do anything.
I guess I've got to read the instructions.
All right, let's see.
Instruction time.
Oh, you can store all your extra little tips down here.
Kind of like the Fred Sanford drawer.
Does anybody know what the Fred Sanford drawer is?
That's pretty neat anyway.
So the stand seems really nice.
So far the stand is really nice.
It holds that real good like that.
Insert tip fully.
Power on and check the screen icon.
Flashing equals loose.
Steady equals properly installed.
It is flashing.
Maybe I didn't get that on good.
Oh yeah, it did go down some more.
Get it all the way.
Oh, yep, mm-hmm.
Now we're at 470.
I didn't have the tip all the way in there.
Badoom, boom, ch.
All right, so you just go down and up with the temperature.
Seems easy enough.
How high does it go?
840 degrees.
I never solder anything that high.
I'm usually in like the 600 range.
Let's try it at 650 and see how that goes.
All right, so I'm just gonna use it on this monitor board
and we'll see how it goes.
And if it doesn't go well, I'll tell you.
If it goes well, I'll tell you.
I'm not gonna lie about it.
If it's good, it's good.
If it's not, it's not.
I'm gonna see.
All right, so I'll just try to reflow the connectors
and see how that goes.
Cordless solder now.
It actually melted the solder.
Struggling with the second one here.
Let's see.
Well, the first one went good.
Still says 650 degrees.
Bump it up to seven.
Maybe you gotta tune it a little bit.
Nope.
Well, guys, it's a piece of junk.
It's a piece of junk.
Sorry to whoever this company is, Ceci or whatever the heck.
Like it'll melt it if you push it right into the tip.
And then if you go down onto the board, it's good.
Well, it's okay.
But then whenever I try to heat up this next pin,
it's like it's cold or something.
It melts it if you push it right on,
but it's not strong enough
to melt all this other solder on the board.
And that's at 700 degrees, it claims.
So if I go to 800, let's try that.
800 is ridiculous.
So now I moved down to this next pin.
It won't melt the solder on the board.
The solder and iron won't melt the solder on the board.
So I'm just gonna email that company
and tell them I can't sponsor that crap.
Look at this.
Look, here's my Weller.
Here's my Weller, guys.
Back to the Weller WSD-51.
Bam, bam, bam.
We're soldering like heck now.
Solder all those connections in the time it took me to tape.
Oh my God.
I'm pretty disappointed.
It was a good idea, but I was skeptical all along,
you know, a battery-powered solder and iron.
Well, it's junk.
And that's why I don't do sponsors or nothing like that.
It's just, it's all just Chinese junk, you know?
It's all show and no go.
I mean, it looks pretty cool.
The stand was pretty nice, but whatever.
I'm sticking with my Weller, guys.
I might even have Ronnie put the Weller link
down in the description again.
See, these people wanted me to put their description,
their link down in the description.
I ain't doing that.
That's junk.
I'm just gonna email them people
and tell them that I wasn't happy with it
and I can't, I can't, no.
I can't tell people to buy that thing.
But I will tell you to buy this Weller.
This is a good one here.
You can see how much I use this thing.
This is my second one.
And the first one was still working.
I just dropped it off the table and cracked the case.
It was still working.
And I just bought this one, you know,
just to get a fresh one.
And I've had this one for probably eight, nine years now.
You can tell I use this baby every day.
This one, I couldn't,
I literally couldn't even solder two pins with this.
But whatever.
I mean, I tried.
I tried accurate temp control.
Rapid heating, it says.
Come on.
But whatever, I can't.
Whatever.
I'm moving on.
Just forget it.
All right, so I'm gonna change all these capacitors.
I've already reflowed these.
And then we'll put it back in the cabinet.
And then I'm gonna do the high voltage unit.
Okay.
Well, I'm sitting here capping this monitor
with my nice Weller D51 soldering iron.
That works perfectly.
And I texted Ronnie and told him
that I tried to do a review on the other thing
and what a piece of junk it was and all this and that.
And he asked me what the wattage was on the junky one.
Because apparently this one is 70 watt.
The Weller's 70 watt.
Well, this one, the one that they mailed me is max 16 watt.
So that's why it ain't doing nothing.
I don't know what you would solder with that.
I mean, it was barely hot enough to melt the solder
on the actual tip of the iron.
And it wasn't strong enough
to melt the old solder on the board.
So I don't know why they would even send me that.
I don't know what you would solder with that.
But anyway, I'm gonna keep capping this baby
and be back with you later.
All right, I got the monitor board back in.
And while I'm thinking about it,
I'm gonna go ahead and swap this power switch.
It's not really rocket science, you know,
it's just four wires.
Here's my new one.
And you can see where this one smashed.
When I was wiggling it, it was barely making connection.
But I'm actually gonna try to move this somewhere else,
I think, because what always happens is
people lay these things down on their back
in the bed of the truck.
And that's sticking out slightly further.
And it breaks the switch just about every time.
And nobody really likes the switch
all the way in the back anyway.
So I think I'm gonna mount it up there somewhere,
just so it doesn't break whenever I sell it to the next guy.
And you could just open up the coin door
and turn it on and off if you wanted to.
So I think that's what I'm gonna do.
And then we're gonna move on to the high voltage unit.
To get this high voltage unit out,
you could either take the monitor all the way out the front,
because you have to undo these bolts right in here.
But easy way to do it is to get one of these little babies.
That's the only time I ever use this thing,
is on asteroids pretty much.
Quarter inch, gets right in there, easy peasy.
See, these are the type of tips that you get
whenever you watch Joe's video games on YouTube, see?
All right, when I get this out, I'll be back with you.
I'll show you the caps we're gonna change in there.
All right, so then there's two quarter inch screws here
that hold this cover on.
And then we're just gonna change these caps down in here.
Bam, bam, bam, bam.
And we're gonna do a little reflow on the pins on the back.
And we're gonna put that baby back in there.
No big deal.
All right, we got the monitor board back in there.
Everything is still working.
Again, we're kind of just doing preventative maintenance.
Got my power switch in there.
I figured that was a good spot for it.
Why not, huh?
Why you gotta overcomplicate things?
Just put it right there, it'll be fine.
All right, so one more thing we're gonna do
is this is called the big blue.
You know why it's called the big blue?
Because it's blue.
Come on now, people, come on.
So these are pretty easy to swap, no big deal.
Pull out the power cord, wham.
Pull out that connector like that, ain't no big deal.
You gotta pull out a couple connectors over here.
Wham, wham.
Then we gotta take out these ground connections on there.
Sorry, the light's not very good here.
So we're gonna take these two ground ones off.
Then we're gonna take this whole assembly
out of the bottom of it.
And there's four screws, obviously, two on each side.
So we'll get out of there and we'll look at it.
All right, those grounds are actually long enough.
I'm just gonna do it right here.
So here's the bottom side of the cap.
So you just take these two screws out.
Loosen up the clamp a little bit
and the cap will come out the front.
All right, once you get the screws out,
you can see that the purple are negative.
So what do you think the orange are?
The orange are positive, okay?
Orange positive, purple negative.
So then this little board just comes out of there.
Like that.
And then we're gonna take the cap out the top
like we were talking about.
We're gonna slide the new one in, negative side that way
because the purple is negative.
You see what's happening here?
Slide that one out, I'm gonna slide this one in,
then we're just gonna screw everything back together.
How's that sound?
Okay.
All right, big blue is in.
Still working, everything's good, just like we figured.
So now I'm down to cosmetics.
You really don't have to change that big blue
if yours is still working like mine was,
but again, I'm trying to do preventative maintenance.
Sometimes those are an issue.
So went ahead and got that knocked out.
Got the monitor knocked out.
May have to adjust it a little bit.
Marquee's already working.
So we've pretty much covered all of our bases here.
Now we're down to cleaning.
Clean, clean, clean.
I'm gonna do the dab.
If you've watched my other asteroids videos,
when they're down,
when you got a little wear around like this,
what you do is you take a foam brush
with some black paint and do a little dab.
Dab, dab, dab, dab, dab, dab.
And you try to cover up all those little areas like that.
I use just a regular black satin paint.
So I'm gonna do that after I clean it.
And does anybody know what this cabinet needs?
You know what would really make it pop?
The loyal viewers probably know what will make it pop.
That's right.
We're gonna put some blue T molding on this baby,
and then we're gonna make that money.
It's gonna make it pop.
It's gonna pop the money right into my pocket
is what it's gonna do.
So I'll be back when I get it all polished up for you,
and we'll see if it turned into an eight or not.
All right, here's how it turned out.
Looks like an eight to me.
Got a little duct tape residue,
I still gotta get off there,
but I ran out of Goo Gone.
But I think it cleaned up pretty good.
I think this is the perfect game
to explain the making an eight thing.
You could actually get every part for this
if you wanted to.
You can get side art, you can get control panel art,
you can get a marquee, a bezel, all that, high score kit.
You can make a brand new one of these probably.
You can get new paper bezel, all that.
So basically, it goes like this.
I could sell it like this for $1,000 probably all day long.
Do you agree?
Yep.
All right, Ronnie just showed up.
So I could sell it like this for 1,000 bucks,
and it's an eight.
Or I could try to make it into a 10.
It would take me forever.
I'd have to buy new side art,
I'd have to buy a control panel overlay,
I'd have to buy a bezel,
I'd have to buy that cardboard bezel,
I'd have to buy a marquee.
I could easily spend $500 probably on parts.
Plus 10 hours of work.
So now I have to,
not only do I have to sell it for $1,500 in,
that's not even counting the labor.
So.
And it's harder to sell because it's more expensive.
Yep.
You need more money to buy it.
So we can sell it like this for 1,000,
or I can order $500 worth of parts.
I could spend 10 hours working on it.
How much do you make an hour?
Let's say you make 20 bucks an hour.
So that's another $200,
and it's gonna take you all day.
So now we're up to $1,700,
and that's just breaking even.
I don't wanna break even.
I wanna make money.
You know?
I think some people do that for their ego.
They just do it to make it perfect
so they can say that it's perfect, you know?
Yeah.
They spend more money, it doesn't make business sense.
Yeah.
So, I mean, if you got one-
And the customer can do that.
If the customer wants to put a new bezel on it,
they can buy a new bezel and put it on there.
That's not the hard part.
Yep.
So I'd rather just sell it for 1,000 is what I'm saying.
I don't wanna spend another $700
just to make $700.
You know, I-
Hey, did you fix the monitor?
Yep.
Well, the customer probably can't do that.
Did you, is the board and the power supply,
did you test that?
Working great.
Okay, the customer probably wouldn't have been able
to fix that.
So you left, anything that's not perfect on it,
the customer can take care of it.
Exactly.
Ready to go.
So I think it turned out pretty good.
Yes, it's got some wear around the edges.
Yes, the control panel has some wear on it.
I did change the buttons.
Made it look a little nicer.
But these are actually silkscreen on there.
If you try to clean that much,
it's gonna take the paint off.
Better off just leaving it.
And don't even get me started.
A lot of people want the wear, Ronnie.
A lot of people want the wear.
If you make it look new,
you no longer have the option of having the original wear.
Yep.
See?
Plus, if you put stickers on the side of that,
it's gonna look like ----.
Look, I'm just saying, I don't like wearing stickers on this.
Nobody makes quality parts.
That's another thing.
You're gonna take all the original Atari stuff off
and then put a bunch of stuff Bubba printed in his garage.
Yeah, exactly.
And I'm not trying to insult anybody,
but you can tell the difference
between the original stuff and the reproductions.
But anyway, all finished up.
I think maybe I'll let Ronnie play a little game later
because it's still daylight out.
And when it gets darker,
you can really get the look of that vector monitor.
What do you think?
There we go.
See you in a little bit.
All right, folks.
The sun has set.
Let's see here.
Now, I'm not an expert at this.
I like staying in one place as long as possible.
And I know you're not supposed to
just blow up everything on the screen like that,
but hey, it works.
You have to go find one and actually play it.
There's all kinds of weird stuff going on.
Like there's little traces.
You place tricks on your eyes.
Like your eyes will like see traces on the screen
that aren't there anymore because of the brightness.
They have an ability to do bright that's just unbelievable.
Look, apparently I'm one of the best players in the world.
They want me to put my initials in.
Look at that.
I'm number two of all time on this machine.
That's amazing.
Let's see if I get any better.
When they start getting going fast like that,
like you hit it and it starts moving across the screen
at a very fast rate, that's dangerous
because it can be aimed right at you
and you don't have time to react before it gets to you.
But yeah, so to my eye, there are traces.
Like there's, traces is the best way to put it.
There's like a, instead of just the shot,
you see like a hundred shots.
It's like a, there's like a line coming out from the ship,
but it's not really there.
It just, your eye just sees it
because of the brightness of it.
I guess the best way to put it is with the vector ones,
you get a lot of contrast.
And whenever you set up the monitor,
there's about three different intensities.
They call it the Z level coming out of the game board.
So there's the asteroids themselves and the text,
and it's all kind of like a half brightness,
something like that.
And then the ship is kind of three quarter brightness
as well as the UFO that just come out.
But the shots are like a hundred percent brightness.
So they're just really intense.
If you stay sitting while the little UFO comes out,
you are going to get shot.
Like you got to keep moving because he'll come at you.
I got hit from behind.
It was like a whip break.
Look at that.
They kind of did me wrong there.
You saw that, right?
So basically they don't spawn you back in until it's clear.
So they will spawn you back in whenever
there's nothing really in the vicinity.
You don't have an immediate threat,
but whatever they did at that time,
there was an asteroid coming really fast
that it just went off the screen on the other side.
And so as soon as I spawned,
I had about a second before it hit me.
It's kind of amazing that they,
I don't know how that little circuit works.
That would be really interesting to see somebody
go into detail about how that works.
It's in the code and I can't really,
I don't really, I can't really,
what do they call it?
I can't break down the code.
I don't know, I don't know how any of that works.
I am definitely not a software guy.
I'm also not a hardware guy.
I'm a repair guy.
I'm a junk man, basically.
I am Sanford's son, Sanford and son.
Fred Sanford is my role model.
Yeah, even when you do like that,
there's a trail that you can see.
It's so crazy, but it's not really there.
It's just your eyes tripping out.
Yeah, so watch the next time that I die.
So you always spawn back right in the center of the screen,
but if they spawned you back
where there's an asteroids in the way,
that would, you know, be pretty crappy.
So typically they don't do that.
So watch how that works.
Believe me, I'll get killed soon enough.
We'll be able to see.
Oh, I almost got, so watch.
See that one?
So it waited until that one went by and then popped me in.
So there's some kind of little circuit where it can tell,
well, of course it can tell because it's creating them all,
but where it keeps track
of where everything is on the screen
and make sure that the coast is clear
before it spawns you back in.
And if you get like a lot of stuff on the screen,
it makes it harder for it.
Oh, they got me, so watch.
See, they wait till the asteroid goes by.
Got you, sucker.
Couldn't quite hit it.
All right, so you get the point.
It seems to be working very well to me.
I'm happy with that.
So I think Joey has done a good job.
Good old asteroids should be a staple in any home game room.
Do people still have the big home game rooms?
You know, in the 80s and the 90s,
especially the 90s and the 2000s,
everybody kind of wanted to have, you know,
eight or nine or 10 games in their house
because it's just cool, you know?
But I wonder if MAME has finally killed all that off
because you can get a little Pandora's box or something
and emulate a lot of them.
Now, again, you can emulate this,
but it doesn't have the vector monitor.
It looks about the same,
but if you play one in person,
or if you played back in the day,
you'll know it's not the same.
So what I was going to say about the brightness is
there should be three levels of brightness.
So if you adjust yours and all of the background stuff,
like the asteroids,
are the exact same brightness as the ship and the UFO,
that's not how it's supposed to be.
They should kind of be a little bit faint, actually.
It's just how it was originally designed.
But yeah, if you were going to have a,
I guess it just depends on what you grew up with.
Like if you played games in the 90s,
you probably don't have a lot of affinity for asteroids.
And you can make the argument
that asteroids was kind of outdated
by even the early 80s.
I guess it came out in 79 or whatever.
By the early 80s, they had already,
even the vector games,
they were color vector games now,
like Star Wars and stuff, and Tempest.
But to me, asteroids just screams arcade.
It just, it looks,
it's just got that iconic look.
Freaking awesome cabinet.
And it's Atari.
You know, people can say what they want
about Bally, Midway, Williams.
Atari's the king.
The king of at least arcade games,
in my opinion, from the, you know,
like from the 70s and 80s.
At my house, I've got an old Atari Breakout.
I just think, you know,
I just love that era of gaming with the,
what do they call that?
The silver age?
The bronze age?
What is it?
The black and white age?
Whatever.
So folks, if you didn't know,
here on our channel recently,
we have made a whole bunch of playlists.
So we are trying to get in the playlist spirit.
I have went through every single video
that we have ever uploaded.
That's like 1,500 videos, if you've been counting.
And I have placed each one of those videos
in all of the appropriate playlists.
So now, if you go on our channel and you click,
there's a videos tab, there's a community tab,
for instance, there's a about tab or whatever,
and there is a playlist tab.
If you click the playlist tab,
it's gonna show every playlist that we have on our channel.
I had a few people telling me,
oh, I wish you had more playlists.
Because people like to put them on,
let them listen in the background.
You get a lot of commercials, you know,
if you just let stuff run.
But if you've got YouTube Premium, there's no commercials.
So I think a lot of people have YouTube Premium,
so they can do stuff like that.
And by the way, if you have YouTube Premium,
we still get paid for you watching our channel.
So we make money off of that,
even though you don't see any ads.
We get a portion of your YouTube Premium subscription
or whatever.
It's probably a whole three cents or something,
but whatever.
But we've got tons of playlists.
So for instance, we've got an Atari Asteroids playlist
that just shows all of the videos we've done
about Atari Asteroids, including this one.
It's gonna be in there.
We've got like a Vector arcade game playlist.
It's got all of the Vector arcade games
we've ever worked on, including this one.
We've got an Atari playlist.
Maybe you just wanna see everything Atari did.
Well, you can watch the whole playlist.
It's just full of nothing but all the Atari games
that we've made, that we've done videos of.
And so there's about 200 playlists.
So make sure to check that out on our channel.
And we appreciate everybody that's watched.
Subscribe, leave your comments below,
and we will see you on the next video.