Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
cool pinball repair video this evening
check this out
williams space odyssey the brother the
sister game to uh
williams space mission so if you played
either one of those you probably
love this thing has anybody ever played
it much and didn't like it this is a
great little game
so we're fixing this for a customer and
we've done two videos on it so far we
did one where we uh did the play field
and then we did another one where we
worked on everything in the bottom
of the cabinet this thing is not working
yet we're still working through it so
i'm going to show you what it's doing so
far if you didn't see those other two
videos though go back and check them out
they were great and a fun time was had
by all so i'm going to hit start
and it's not going to work because
there's no credits on the machine
they've rigged this up to where you add
a
coin with this button
so when i do that it's going to start up
but look what it does
we're good right
oh wait a minute
so a customer came in the other day i
had it just sitting here and they hit
start and then we're sitting here
playing it
while it's doing this the whole time
so what's going on that sound you're
hearing is the score motor
turning over and over and over again so
i'm going to show you what's up with
that
because i'm so buff i can lift the blade
filled up while i'm holding the uh
the uh
the phone the camera it's not a phone
it's a handheld camcorder
see that
we're riding people we're running
is moving
i'm looking for other things
okay i don't see anything else
so we're trying to figure out why it's
doing that
okay
so we're doing our typical thing where
we uh we go through and clean everything
trying to fix it so the next thing we're
going to mess with is the bottom of the
play field which we may figure it out by
doing that okay so i'm going to stand
the play field up
and uh
we're going to take a look at the
schematics and see
see if we can figure out what in the
world's going on with that
but the next thing to do as well is the
bottom of the play field so we're going
to stand the play field up look at it
and take a check of the schematics
okay folks so i've pulled up the
schematics we're going to figure out why
it's doing what it's doing we've got all
the clues we need don't we
so i already cleaned through the bottom
uh the out hole relay and a bunch of
that stuff right the score motor
we did that all on the previous video
the score reels are resetting as they
should and the ball is actually kicking
out where you can play the game
but it never stops resetting
so this is a two-player uh game which is
a little simpler than the four-player
game so we should be able to figure it
out just by looking at the schematics
so the score motor is running so i'll
just show you like my thought process
behind thinking of the logic behind what
it's doing like why it's doing what it's
doing so one thing that we know is that
the score motor is on
so the score motor is just constantly
running so what makes it run well on one
side it's connected to the transformer
and then on the other side if any of
these switches close
the score motor will keep running until
that switch is open
so
if you go back to here there's a whole
list of stuff so the reset relay will do
it
right
so if the reset relay is on it will just
keep running
and then this one says the index switch
so basically once one of these turns it
on it will run until it gets back around
to its home position
because that switch
is
open at its home position and they do
that so that it's always going back to
home so let's say the reset relay comes
on for
half a revolution well for it to get
back to home this switch needs to come
on
for it to get back to its home position
that's kind of confusing but once you
understand it you go oh yeah
and then the out hole relay if it closes
it can turn it on the shooter relay the
eject relay the 50 point relay the coin
relay the 10 cent relay the bonus relay
and the super advance relay
so
out of all of those what do you think is
making it come on
well the ones that make sense to me are
the reset relay because it's kind of
resetting
but think about it the score reel
stopped turning
that went back to zero and stopped so
it could be the reset relay is not held
in anymore
uh the out hole relay but it sure keeps
trying to kick the ball out sounds like
the out hole relay may have something to
do with it the eject relay
sounds right but that's actually not the
the uh ball that ejects out into the
shooter lane
that's the relays on the that's the the
saucers on the play field where the ball
lands in the saucer and then kicks back
out
so that doesn't seem to have anything to
do with it
uh 50 point relay coin relay 10 relay
bonus relay super advance relay well the
bonus relay the bonus unit was doing
something
right
so something was going on with the bonus
unit so if either one of those are
locked on then the score motor will
continue to turn now i looked at the
video
and you couldn't tell in the video that
we just filmed
uh and yes i say filmed and i'm going to
say film until i'm dead okay deal with
it i know it's not on film but i'm
filming a video
uh i'm not going to say i'm digitizing a
video come on people come on now
i'm not shooting it either right but you
might say you're shooting a video
i'm filming a video
and uh uh i went back and looked at the
film
pulled up the tape as you would and you
can't tell on the tape but there's a
couple things going on the out hole
there the
out hole kicker is firing over and over
again that's actually called the ball
release coil
the bonus unit keeps trying to reset
over and over again it resets over and
over and over again
and the score motor just continuously
runs but what you can't see on the video
is that the out hole relay was also
stuck on but it was never unsticking so
you couldn't tell but if you look real
close you can tell that it's engaged
so if you go down here
we're looking through all the schematics
now you know all of this is confusing to
people because they go man where do i
start there's just so many wires well
i'm going to show you the first thing we
started it that we looked at was
why is the
um
why is the score motor on right so we
knew that was running so we looked at
what turns on the score motor right so
now let's go look at the ball release
coil it's right there so what makes it
what makes the ball release coil fire
well on one side it's tied to the
transformer
through the reset
relay right
now this reset relay thing is
interesting
if
the reset relay is pulled in so that's
that means normally closed
if the reset relay is pulled in the ball
release coil can't actually work
okay so since that's firing that means
that the reset relay has went back and
reset
that's why it does all of the score
motors first
um and then the ball kicks out
okay and again this some of this stuff
you won't get maybe first time you think
about it if you're learning through
these and trying to learn
but it makes complete sense so basically
the reset relay pulls in and it opens
that switch and then the score motor
starts doing its thing and blah blah
blah and it resets all of the score
rules once the score reel is reset once
everything resets
it kicks the ball out and the one way
that it does that is by the reset relay
dropping out so the reset relay
releases which actually closes that
switch back see how it's normally closed
so in its un
energized position the relay reset relay
has one switch on it that actually is
closed
right
and why would that be it's so that all
this stuff can work
when the game is not in reset
okay so anyway the ball release coil
what makes it happen
well the reset relay has to be done
see the blue and white wire that's what
the blue w4 means the four means it's
the fourth blue and white wire in the
game
okay so we get the c4a so that's switch
uh that's cam c
um or i'm sorry cam
4 switch a
on the score motor
so it's a normally open switch see the
two lines
4a whenever the cam uh turns around
whenever the score motor turns and it's
turning the whole time remember score
motor is turning when when cam 4
closes switch a
connects power to the ball release coil
if the game is still in reset the reset
relay is still pulled in that line will
be broken
and so the ball release coil will not do
anything right
so you have to close switch 4a on the
score motor cam and then also
the out hole relay would have to be
pulled in and it is so if the out hole
relay is pulled in that line is over
here
power goes from here through the closed
switch on the outhou relay
and then when uh the score motor turns
around to can't cam 4 switch a closes it
closes that
sends power and a bam kicks the ball
release coil and then the score motor
keeps turning and it takes
it opens that switch again
which releases power to the ball release
coil that's why you're seeing it go
click
click
click it's doing it every time the score
motor gets around the 4a it's doing that
okay so what does that tell us it tells
us that
the out hole relay must be on well why
in the world is the out hole relay still
on the ball is no longer in the out hole
right
well let's look it up
um
what turns on the out hole relay well
it's right here
the out hole relay will also not work if
the reset relay is pulled in because if
the reset relay turns on
it opens that switch
so the power would not come down
to the out hole relay
okay
if the game over relay is on
it would also open the switch right
okay
so the out hole relay so that we know
that the reset must already be done so
the score motor has been turning around
it's reset the score reels
it's done with that
and
it's closed so now the out hole relay
can come on so on one side it connects
through here to the to the
transformer
and then coming back oh there's a switch
on itself now how in the world did that
happen well
that's just a hold switch
and once it pulls in it holds itself on
but we'll look at this other way it
can't turn itself on through that it can
just hold itself on but how else could
it get it well what's this a bonus relay
so if the bonus relay is not pulled in
so the bonus relay has not energized
then that normally connected switch
is still connected
if the bonus relay energizes
then the out hole relay can't work
because it would open that switch right
so the bonus in relay has not pulled in
and then we come back to here and look
it says
bonus unit
close
at zero position
switch
so when you get to the zero position on
the bonus unit
this switch
closes
allowing
power
to connect through the index
cam on the motor
through the switch at zero
to the out hole relay now why in a world
why is it so complicated why do they put
all this in there it's because they're
they're trying to reset the bonus unit
before the ball kicks out
so the bonus unit has reset that because
when it resets to zero it closes that
switch
and that's the only way
that the out hole relay turns on
right if you look there's no other way
there's no other way that power
uh ever turns on the out hole relay and
you need the out hole relay to switch to
to kick the ball out into the shooter
lane
so it has to close every time that the
the ball is getting ready to shoot out
into the shooter lane so that would be
at the end of each ball for each player
and the only way it does it is through
this little switch on the bonus unit why
in the world would they do that why not
just make it where
uh the switch on the play field that the
ball lands on
does it or something right it's because
they have to count the bonus unit at the
end of each ball
right
so what happens is the game turns on and
it starts trying to reset so it resets
all the score reels and then it resets
the bonus unit well when the bonus unit
gets to zero it closes that switch and
turns on the out hole relay the out hole
relay closes and kicks the ball out into
the
into the shooter lane okay so why is it
doing what what ours is doing
it's all reset why does it keep running
because that's not it's this switch is
still closed
so it closes at the zero position switch
that means every time that that um
uh
while every time as long as it's on this
index
right
it will keep that out hole relay on
because it's always going to be at zero
until you score something and get it up
however that's not how it's supposed to
work
uh
look at this
bonus unit step up
bonus unit s u bonus unit step up coil
well what turns that on
well you advance the bonus unit with
either the advanced relay or the
swinging target relay see how those two
do it
but look there's another way to do it
when the out hole relay pulls in
up to there right
that's what connects the power
to the ball release
which is happening right over and over
again it's trying to release the ball
when we get to 4a
but it also connects to power
when you get to cam 3
3b
that closes too and what does it do
it steps up the bonus unit well if the
bonus unit were to step up what would
happen you'd go to position one
which would open this switch
right
and then you would go up to here this
one says open at zero position switch
right you would close that switch
because you're no longer at zero you're
at one
well now instead of it instead of
energizing the out hole relay
it would go through here
and when the ball lands in the out hole
switch
the next time after the ball
it would turn on the bonus relay
and do the whole thing over again
right
so
all of that to say why does the thing
keep running it's almost certainly
that whenever
it's supposed to
step up the bonus unit it can't
so the bonus unit is stuck on zero but
it should actually go to one so at the
beginning of each ball it should be on
one it shouldn't be at zero but for
whatever reason ours is just staying at
zero and it's making this continuously
run over and over and over again since
it's since it's just continuously at
zero the out hole relay never ends
and since the out hole relay never falls
out
it keeps the score motor on
because it's constantly closed
so why is the bonus unit not stepping up
well it could be that switch on the
score motor
on cam 4 that we were looking at
or
very likely
it can't the the
stepper units screwed up
on these games whenever you have
problems it's almost always the score
reels or the stepper units or the jones
plugs we've already cleaned all the
jones plugs
score reels seem to be resetting just
fine because the game's playing right so
the reset relay is falling out but we
got this little problem where the
stepper unit on the bonus unit is not
stepping up let's go look at it
okay so what we saw was this just kept
going in click
click
click
click click
if you're not familiar with these um
you might not notice what i'm seeing
here but when that goes when that resets
in
this bar is spinning around
and it's opening one switch
and it's closing another switch that's
our open at zero and our close at zero
switch
but look at this
if you were to try to get this to pulse
up
it's all gummed up
and it can't step up the
stepper unit
that's the whole problem
if we were to manually
put that up to position one
to where it's no longer on that
it would stop resetting all right
so let's uh let's test that theory
all right we're back doing what we were
doing
this is the out hole relay
notice it's actually
which one is it
uh
yeah that one
notice it's actually pulled in
let's see if we just simply move this up
if it'll stop it
that stopped it now why is it going back
when i let go of it
oh it's stuck now it's because
that reset
all of this is gummed up like it's not
moving like it should it's all stuck and
needs clean so that's our problem
so uh
basically a lot of this stuff is
supposed to move and pivot that's what
all these springs are for but whenever
like i'm pulling that reset in that bar
is just going straight out it's supposed
to stay where it is
and smack
slide back into place so all of this
just needs cleaning basically so if
you're working on something
always look at these stepper units they
get all freaking gummed up
and look at your uh jones plugs
and look at your score reels
okay so i'm gonna clean through some of
this and then we'll look uh specifically
at that stepper unit
okay so i took the nut off this side and
took the spider off and then if you
take out one of the screws on the switch
stack you can pivot it enough
that you can pull the whole gear out
okay there's a spring you have to unwind
but
no big deal
so i got that out we're gonna drop some
oil down in that shaft it's metal and
the uh the shaft that goes through it is
metal the bushing and the shaft are
metal so you want to oil it a little bit
three in one oil is what i use
uh but you can see how just like
everything's all screwed up so when this
comes in
that's what i was talking about see how
that lever just moves and it's stuck at
a right angle
it's literally just
froze together
that's supposed to pivot as crazy as it
sounds
and then you get something similar here
that thing
that should return back out
but it's all gummed up
so i'm gonna clean this up oil it you
can just
disassemble as much of it as you want
make sure you put it back exactly how
you had it but you got to get all of
that where it pivots really smoothly
um
and don't be afraid to
oil all of it if it's metal on metal oil
it
okay folks so i have oiled the heck out
of it
so let me show you
now watch this
so that looks just like what it was
doing before right but not really the
angle
is changing on this see how easily that
moves now
okay so when you pull this in that
actually goes in
see how before it was like staying stuck
out so it would do this
right it's actually
staying vertical
so that it can hit that cog and push it
back up
so
you get you just got to get them where
they're very
loose
loosey goosey
and where the springs work okay
so just like that so you oil it up that
way it can do its thing now
i have been watching our buddies
at the goat shed em pinball repair
palace
in australia
they are ex they have a video a channel
here on youtube they are experts at
these ems and uh they have a similar
vibe as our channel in my opinion
they love them they don't they don't
they don't make videos talking trash
about certain games and all of that
they're very positive and i try to be
that way too
so
they uh
kim whenever he does these he often cuts
a little bit
of the spring
and then shortens it a little bit now i
had heard in the past not to do that
but he makes a really good point he he
worked for years
i believe it was in
it was like office equipment of some
sort i don't remember but he did that
for years as a repairman and he ran into
that a lot so basically the springs you
know this is this is a 40
what 45 year old now
spring and they lose a little bit over
time so his point was you need to kind
of retention it a little bit by just
making it a little bit shorter
i've done that in the past on a couple
of them but i didn't i didn't i hated to
do it because i hate modifying the stuff
it almost seems like you're cheating a
little bit you're making the spring a
little shorter
but talking with him he has assured me
that uh you kind of need to do it on
these old springs because they're just
not quite as
they don't have the same and it makes
perfect sense they're stretched out a
little bit basically is what's going on
they've worn out
uh by being used over and over and over
again so if you make them a little bit
uh
more snappy that may help you i didn't
do it to these yet but i may so if you
get a point where it won't completely
reset or it won't it won't work right
you may need to shorten these a little
bit if you get it nice and oiled though
you might get away with not doing that
but if you haven't checked out the goat
shed em pinball repair palace they call
it a shed but i think it looks like a
palace i mean they've got
games that they're working on all over
the place there's parts everywhere and
they're in australia you know so they've
got to
they've got to kind of hoard whatever
parts they can get because they're not
as easy to come by you know so they've
got motors they've got gears they've got
switches they've got relays it's like a
palace in my opinion so check out their
channel if you haven't i've been talking
to those guys a little bit they're
they're both really cool guys
uh so make sure to check that out um but
i'm gonna go ahead and put it all back
oiled and all cleaned up on this little
board here
we just clean this with a little bit of
sandpaper
and then put a little bit of
synthetic grease on it so that
everything moves
properly and let's see what she looks
like
all right so we got it all back together
this is the stuff we use
it is dielectric that's what you want
get some kind of dielectric synthetic
grease if you want this exact stuff we
use you can get it on our website go to
lionsarcade.com there's a parts page and
we have a bunch of links to some of the
stuff we use in our repair videos
if you click any of those links it takes
you to amazon most of them and if you go
to amazon to buy anything after you
click one of our links we get a tip so
go there and buy a sports car
we appreciate everybody that's been
buying sports cars though
a gentleman the other day emailed us he
bought a uh jbl
sound bar
that was expensive as all get out
and we got a bunch of money off of it so
thank you to the gentleman who did that
and then he emailed to let us know he
did it too what a guy
[Laughter]
all right so uh uh yeah we put a little
bit of that on just to get rid of some
of the friction
we got rid of the stiction now we need
to get rid of the friction right
so
there's a couple little adjustments see
how the
see how these are lined up right on the
the rivet you can adjust that with those
little screws there but let me look at
this one to see if it's got the problem
oh this one won't because it's a one way
well maybe
let me see
well that one ain't doing nothing
that was horribly disfigured so what
will happen is when you pull that thing
in sometimes it'll move backwards a
little bit before it makes a step so
it'll move back half a step and then
forward step back half a step forward a
step it's like a
uh paula abdul two steps forward and two
steps back so if you see it where it's
doing that
it's doing the tube steak boogie
if it's moving backwards a little bit
the way you adjust that out is with this
screw here
this screw
changes how far the plunger
moves
okay so you can actually adjust that out
and the reason that you have to do that
is because this coil stop inside of here
wears over time it gets shorter
and so you adjust it with that screw so
basically you turn that screw until that
thing whenever it steps up
it doesn't go backwards so i'll show you
so i moved just barely backwards
so yeah it's got like a little recoil
a little bit like that's fine but it was
moving like half a
half a rivet back
really bad
so you turn that screw and basically
you're shortening the the
stroke now when you do that it's going
to get this
all out of alignment
where this no longer lines up with the
rivet it'll maybe be on two rivets at
the same time
so the way you fix that is you just kind
of
you can move it just by turning it
you're pivoting it a little bit there's
a little bit of play in it and you get
it lined back up with the rivets and
then you can take this back off and
tighten up those two screws
the reason you don't have to loosen them
it's because they loosen on their own
over the years so i'll bet on yours you
can just turn that board and move it a
little bit okay to line it back up but
you gotta tighten it down so it's not
easy to move so let's try our theory
and see if we get it to
go through its reset circuit so let's
see here
i had them backwards too the one that
this one is the step up this one's the
reset right
so it resets one at a time
steps up so we're about halfway through
that when we turn it on it may do that
uh even though it's in game over let's
see what happens
nope just comes up and does that okay so
we're going to start a game
it should reset everything
and then ultimately not kick the ball
out because it doesn't have the ball but
let's see if it comes up in the gameplay
or if it stays stuck if that fixed our
problem and we'll watch this this should
reset all the way down and then step
back up one
reset reset reset reset reset reset
step up one bam
just like in the textbook
come on come on people you can't get
it's a song p people
come on now
it's easy top
i i didn't write it
you can't you
you can't get mad at me for saying that
talk about the tube steak movie i
i didn't i didn't come up with that that
was zz type they played it on the radio
i'm being perverted by the radio
it's a good song you should just
don't act like you don't know z come on
now come on people you know zz top
the guys with the beards
come on now i can't get in trouble for
that
i used to uh when i was a kid i used to
watch fred sanford all the time or the
sanford and son
and uh
he'd say something crazy and
aunt ethel would or was ann ethel i
think she'd say
well i never
and he'd say
i bet you did
all right folks so i'm cleaning her all
up so i'm going through now and cleaning
the switches
all of the reeling you just basically
got to get them where they're opening
and closing right
right
um
everything looks cool
we've still got to do the same thing
with this one it's basically got the
same problem
when that pulls in
all right
something ain't working right there
all right this is the same thing it's
just all gummed up needs to be cleaned
up
so that's what i'm doing next i've
already done the jones plugs um
and then after i do that i need to swap
the light bulbs so all the light bulbs
on the bottom of the play field need to
be swapped just because they're old and
on their last legs look at that one
look at it
look how bad
so it definitely needs to be cleaned up
that thing's as raunchy as red fox look
at it
all right so i'm gonna uh i'm gonna keep
cleaning
going to swap light bulbs if i run into
anything else weird i will let you know
okay folks i went through and replaced
all the light bulbs and uh cleaned the
other stepper
and you can use things like that to
check your light bulbs too so it's those
middle ones there
whoa
i tried to reset it as i as you step up
through it
you see the light bulbs change
and so you know which ones are which uh
then i've got the a the b and the c
so they turn on different bulbs too
okay but what we're up to now is this
swinging target
there's two things with it
one it's kind of dragging the wood there
so it looks like i can fix that
by simply putting a little washer here
all right there's a little bit of play
so i'm just going to put a little washer
under that c-clip
to hold it up a little bit and then also
this one wire here
the cloth
covering has come off of it so i'm going
to disconnect that and put some heat
shrink tubing on it
and put it back and uh
that's about that the flippers we're
going to play and see if they need
anything they look bad like that looks
bad but it doesn't necessarily mean
anything so we're gonna see how strong
they are and if they need any uh
any help
but after cleaning all the switches and
everything i think we're about ready to
give her a little
give her a little whirl so i'm gonna
work on that uh motor just a little bit
it was already working in the earlier
videos
and we'll go from there
all right folks so let's try it a little
bit and see if she'll do anything now
see if we got it fixed
ah it did do two
but we're on a thousand like we should
be
looks like i've been cleaning
looks pretty lively
oh i hit it
[Laughter]
oh perfectly placed
oh i missed it
so it did it once and then it kind of
did it again as it kicked the ball out
that's probably all right
um check this out then
this backlight's pretty rough but
we're still on ball one so that's not
right now how come the
how come it's not moving from ball one
to ball two to ball three
it's scoring
and it's only on one player
but how come it's not moving to ball two
it's because the ball count unit is in
the back box and i ain't made it up
there yet remember we're still working
on the bottom
but
all of this seems to be working pretty
good so oh also no chimes yet remember
we unplugged the chimes so we got to
work on those so we still got the back
box to do the ball count unit we should
find back there and the uh the chimes so
we're getting there though
um i did put whenever before i put it
down i replaced the sleeves and the
flipper coils
they seem to be pretty snappy though
uh so there you go so so far we've got
it pretty much planned but uh it still
needs a little work so make sure to give
us a thumbs up for taking the trouble to
film it for you we didn't have to do all
that
subscribe to the channel and we'll we'll
do another video on it soon
usually two days we're about two days
apart on the videos right so we'll see
in two days we'll do another one
and while you're at it don't forget to
check out my brother donnie oh we gotta
mention the motor too okay don't forget
to check out my brother donnie he has a
channel here on youtube
that uh
he's always working on cars vehicles
things like that
and we've got a couple old buildings
that we're restoring fixing up to get
them ready for people to
uh rent that we go over on his channel
so check that out the motor you can hear
it
and i always get somebody leaving a
comment yeah the motor's a little loud
oh my god no i don't know well that
drives me crazy well then you shouldn't
buy a pinball machine and put it in your
house these things have a piece of glass
on them
that quiets it down and it was in an
arcade i mean there was crap going on
all the time
it's a damn motor people it's going to
make noise that's just how it is okay
i oiled it a little bit but it's going
to make a little noise so
customers calling probably to complain
about the motor noise they can probably
hear it from next door or something
so
yeah the motor makes noise
and
all right so i hope you enjoyed it uh
we'll see you on the next video where
we'll work in the back box a little bit
can't wait for all the comments on that
one