Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you we
have been stumbling through this got
live out of sight pinball machine but
have not been able to get it to run yet
so we did a video where we kind of
showed how it was when we got it in
working on it for the customer
uh and then we work through the
mechanism board in the bottom
uh with the score motor and all of that
and then we did a video where we worked
in the back box all of the stuff back
there we did a video where we worked
under the play field all the stuff back
there down there and we have still not
been able to fix the thing so I'm going
to show you what it's doing and we're
finally up to the video where we're
going to work through the schematics and
try to systematically fix this thing
okay because our our system of just
randomly cleaning well yeah of
systematically cleaning everything did
not find the problem so it's it's got
specific issues that we're going to have
to try to track down
uh so whenever you turn it on this is
how it looks it says game over and it
says tilt that's how it's supposed to be
a lot of people uh whenever they tell us
that A Game's messing up they'll say oh
it keeps tilting
it's not it's it is tilting but it's
supposed to do that so that's how that's
what they do whenever it comes on and
it's in the middle of a game and just
whenever it's first been turned on it's
supposed to say tilt so whenever I hit
start
resetting the scores
look down here
okay so it says one player can play at
the same time so that tells you that a
one player game has started but the
second player reels are lit up
and it says ball and play two
so
that tells me maybe something's going on
with the player unit in the back
all right so if we start playing it
all kinds of weird stuff happens
so it scores on player one
and player two
and immediately goes to ball three
as you're playing it
well that's weird
why in the world would it do that
and then when the ball lands in the out
hole it doesn't do anything
so how would you possibly figure out
what in the world
what in the world is the deal with that
well we're going to look in the
schematics
and how it how would you track that down
this is the fun part where would we look
in the schematics right now these are
gottlib schematics they don't like you
having copies of these
floating around the internet for free so
you kind of need to buy them or have an
original set like this this is some of
the original schematics now if you need
to buy any of these you can go to a
little place called the pinball resource
they are licensed to sell all of these
okay
but I'm going to show a little bit of
them in this video just to show you how
schematics are very useful and you
should own a copy for your pinball
machine a lot of people don't like that
you have to buy the things for the
gottlip games but you know you're
talking 12 15 something like that
and it kind of helps support uh the
licensees like the pinball resource and
making reproduction parts and all of
that and that's just their that's how
they do it so it's it's not the pinball
resource it's the people that own the
gottlib license okay you can also buy uh
uh schematics for any other brand of
machine from the pinball resource though
so it's a great company good people run
it and it's one of those companies that
will take the time to reproduce little
metal parts that you need in the pinball
machines that nobody else messes with
right and that's what I go out of their
way to do a lot of things that really
help people that work on pinball
machines so we like to support them so
if you uh if you need a set of
schematics make sure to buy them from
them so I'm telling you all of that so
because like I said I'm going to show
you some of these schematics and I just
want to make it clear that we're not
trying to like you know bootleg their
schematics that they value so much
at the gotland
trademark okay so how would you track
down what's going on well first of all I
want to see what why is the number two
light on
and what makes the ball and play number
three light come on because that's some
of the only evidence that we have right
so if you look on this side it shows you
all of the light bulbs
okay so the
first player score lights are lit up
right now
and the second player score lights are
lit up right now
okay
this p2c that is the player
uh unit switch to C
should go back and forth and allow one
or the other to light up unless
the QB relay is in now the qb3a I'll bet
is the who got a hot one I'll bet is the
game over really
our buddy Kim would know off the top of
his head it is
so the QB relay is the game over relay
so do you see what it's saying there
it's saying that
the first player's score lights should
be lit up there's five bulbs they're
showing you
if this switch on uh p2c is connected
that way
so it's normally connected if it's
swapped down to here this one see that's
a make or break switch this one would be
lit up which is the second player's four
lights
but never both because this thing
switches back and forth It's a make or
brake switch
the only uh difference would be when the
QB relay is in the game over relay now
why would that be it's so that no matter
what position that is in both sets of
White's turn on why would they do that
just so it looks pretty at the end of
the game
okay
so we've got both sets on right now
what's up with that what's up man right
I got a switch that I missed that's
screwed up somewhere
or I wonder if
say that some of them are burnt out I
wonder if there's another row here
that's turned off right now or something
or there's another row here that's
turned off right now so I'm going to
pull this out from the wall and I'm
going to lean the back box down and
we're going to look at that because I
got to swap the light bulbs anyways so
if both of them are on right now either
my game over relay is got a switch stuck
on
or several switches stuck on or the PB
switch is all screwed up that p2b or
whatever it is p2c switch is all screwed
up so let me slide this out from the
wall and uh we'll look at the lights on
that box
okay so here is the
insert panel they call it lean back and
you see how the lights are arranged the
the ones on the first player are above
the reels the ones on the second player
below the rails but the whole point is
they're all on and it shouldn't be like
that
so I'm going to go through and replace
these light bulbs while I've got this
open
uh and then we'll uh we'll get into the
schematics
okay so with the lights replaced you saw
how that was so I think uh the one just
that bulb was out it uses the bulb above
the four
uh so here's what I'm gonna do I'm going
to restart it again and we're going to
go around to the back
and we're going to watch this and we're
going to see if this thing
after the score reels reset we're going
to see what this does as far as moving
around that's going to keep stepping
around and we're going to see where it
stops and then if it advances another
one after that or what happens
okay okay
so it's on ball two
and you saw it Advance all the way
around I'm almost tempted to think that
maybe this is just supposed to be back
one but we need to see what's making
that step and all of that I think that's
going to be our problem it could be the
switch on the game over
uh
relay but if it was just that you know
doing the light thing if it was just
that then why is this scoring at the
wrong time and on the second player and
then jumping the ball three clearly
there's a problem with the player unit
here so I think it's more likely that
the light thing is going on here
um so I need to try to figure out where
home position is
and what makes the thing pulse up
okay so we got to go all the way through
it here all right so when you hit the
replay button
because the anti-cheat switch hasn't
been knocked open
and motor 2B is closed because it's in
its home position
and motor 1C is closed because it's in
its home position
and sb2 is closed because of the uh
that's the reset relay hasn't been
tripped
reset uh control relay hasn't been
tripped
and then you press the replay button
and then the W
relay hasn't been tripped which is the
second coin shoot relay
and then the zero position replay unit
you're not out of credits so you've got
more than one credit
okay
and the PB relay hasn't been dripped
so the PB relay is the second player
relay so there's not a second player
uh it pulls in uh the V relay
which is the replay button relay
okay
a switch on the replay button relay
closes
and turns on the S relay
the S relay is the start relay it holds
itself on through a switch
back here until these motor switches
this motor switch opens up or that motor
switch opens up so it holds itself on
and what it does is whoa I hit the
flipper
it turns on the score motor so now we're
getting motion
once the score motor starts turning it
holds itself on
with a switch on itself at motor 1C
right until it gets back around to 1C if
when it gets back around to 1C nothing
else is turned on
it will turn itself off because that
switch will open and it'll stop but if
any of these other relays are on the
motor will continue turning
okay the ZB relay is the first ball
relay if the if but on the previous game
any score was made that tripped
so
that will not be here that will be up
here right those are the relays on the
relay bank that once they fall they fall
open okay but let's say that no points
had been scored on the previous game or
whatever
then that means you're sitting at ball
one you haven't scored anything right or
you haven't hit the runway switch or
whatever right you haven't scored
anything whenever you hit start
this will pull in the PB relay which is
the second player relay
so that's how you start a two-player
game you hit start more than once but
let's say that we're in the situation
we're in we're in the previous game a
point was scored and the the first uh uh
ball has uh relay has closed so that
will close that will be closed there
and the start relay will then start sb2
sb2 is the reset control relay at the
same time it will send a pulse up to
here and increase the total play meter
but the start relay is now on and sb2 is
now on okay
sb2 this I know this is going to sound
very confusing if you haven't messed
with these but I'm trying to take it
slow because I'm thinking through it
slow trying to find the problem sb2 is
tied to sb1
so when sb2 Trips sb1 Trips so if you
see here it says sb2 reset control relay
and sb1 has no coil it is just reset
control switches so why do they do that
they do that because they just need more
switches so there's a relay
and then a second relay next to it when
this one trips the other one goes with
it okay so we have now turned on sb1 and
sb2 and the start relay okay
there are switches on sb1
that once they close they will lock this
score motor
on continuously the only way to reset
sb1
is to reset the entire control Bank
so you're going to have to push all of
those relays back up to do that so what
that means is once the start button once
the start relay trips the SB relay that
score motor is just going to keep
running until the cows come home so let
me show you that reset bank so you can
see what I'm talking about so here is
the reset bank and you can see it's all
labeled so that all of these when once
they trip they stay closed until this
bar resets all of them at the same time
so when does it do that at the end of
the reset sequence basically so the
first one is the reset control relay sb2
and then the reset control switches so
these two are tied together when this
one drops it will drop both of these
um okay
and then the next one is the last ball
relay
appropriately named the game over relay
also appropriately named the first ball
relay
also appropriately named the second
player relay
it's a good name for the second player
relay and the double bonus relay
okay
so my whole point is
once that S relay trips both of those
it's going to stay tripped until this
resets it you that is that confuses a
lot of people they don't realize that
once those fall they stay like that okay
that helps you understand the reset
sequence that we're working through
right now
okay so this P relay
is the add player unit relay so we're
trying to figure out what makes that
thing turn around in the back right
well this P relay
the only way it can be triggered see it
holds itself on through a switch through
itself if it pulls in but the only way
it can be turned on is through the
trough switch
now the ball kicker switch and the
trough switch are two different things
the ball kicker switch is the one right
there we call it the out hole switch
sometimes the trough switch is about
halfway up here as the ball rolls
through the trough it hits a switch
that's what advances the player uh
the player controls what do they call it
add player unit relay okay and you can
see that right here
so if that switch were to close
as the motor turns that would close
and then blah blah blah
through this through this
add player unit okay but that can't
happen because we're never running over
the trough so all of this we don't have
to worry about okay
so if you watch this line here
if the sb2 relay is closed and is it
yes it is and the S relay is closed and
is it yes it is
right then power connects through here
and we just bypassed all of this normal
way that it steps up and then motor 1A
is turning right the phone is turning so
that's closing at some point
send them power down through here
and then it's if if we're at uh if p4e
is closed
and if p3e is closed
then it will send a pulse to the add
player unit so think about what that
does
that advances the add player unit
until either this switch
or this switch opens up so it moves it
to either to the position
3E or 4E till that switch opens now why
would it do that it does that to make it
dependent on the
other path so let's say that
um what is the best way to do it here
let's say that this switch opens
e3e so how would that happen
by the player unit moving until p3e
opens
okay so p3e opens
and now power cannot run through here so
now power is running up through p4e
to here and it can't get through there
so it can get through here but only if
there is a switch close on 10 100 1000
and 10 000.
and they call that the first player
reset switches so what does that mean it
means all of those have to be on zero to
get power through there well once those
get to zero and power gets through there
then it steps it up again well then what
happens it opens that switch
so now we're schlonged again right so
the power can't get through that way so
it comes through here
and all four of these have to be on zero
for it to get through to here to all
four of those being zero to add the
player unit
I know this Probably sounds really
confusing it's just how they it's how
they use switches and motors and things
to and coils to reset everything okay
it's just how Godly chose to do it
so how does all that work
well
here are the
score
relays
the score reels the coil on the score
reels
and you can see one way they can get
power is through n is the 10 point relay
10 point relay 100 Point relay thousand
Point relay also a thousand point
so these can all get get uh Advanced
through the point relays the other way
they can get Advanced is through
switches on the player
relays okay
so you can see that a switch p3a if it
were to close
if
the score reel was not at zero this
switch would be closed
so as that close if that close is closed
and that's closed it would send power
to the score reel
right but it can't just do that because
it needs to do it over and over again
okay
so luckily
it gets its power
through a switch on motor 1A and
remember the score motor is turning
so as that turns that switch is going to
close and open close and open close and
open close and open and it's going to
keep doing that
it's going to keep doing that
since that switch is closed
and this isn't at zero this is closed
it's going to pulse it so it's going to
turn the wheel Bam Bam Bam Bam Bam
so let's say this one's on 9 instead of
zero
that's closed because it's not on zero
that's closed because we're at the third
position
on the player unit
remember it turned until that switch
opened up
bam and it stopped it at the third
position
where that switch just happens to be
closed
okay and then the score motor turns and
Bam it sends a pulse look I got a cut on
me
it sends a pulse and it turns that score
real to zero click
so then what happens
did the pulses stop no it keeps trying
but it can't do it because it's open
that switch up
so this one stays at zero power can't
get through there anymore that ain't
gonna work
so then this one does the same thing and
on and on and on and it resets them all
back to zero well when it gets them all
back to zero
you just provided a path since this
switch is open
to power through here and so it steps up
the player unit
but when it steps up the player unit
guess what it does
it opens that switch oh no here we go
again
now we're gonna have to figure out how
to get power some other way
so it has now closed all of the four
ones so now that's closed
and that's closed because it's not on
zero and so it pulses it same thing now
remember the score motor just keeps
running this whole time because the
control bank's dropped right so it just
keeps running keeps running keeps
running keeps running
and the thing goes good cake stops at
zero and maybe the other one has to turn
five times and then it stops at zero and
they all stop at zero okay so once that
happens now where every all the score
reels are reset well that's just great
ain't it it starts pulsing the add
player unit again
through here
through motor 1A
and through here and it's just going to
keep doing it
until we reset either the S relay
or the SB relay
okay so let's see what kills the S relay
I told you the wrong thing a second ago
when I said the ball kicker switch
that's actually this one on this machine
this is the ball return switch
but same thing so if the ball is sitting
in the out hole
right
it cannot kick
uh let's find it here
ball kicker was what I was looking at
ball return is what we need to look at
what turns on the ball return
is the O relay so I was saying oh it's
the J relate that's the O relay for what
we're doing
the O relay is the out hole relay
it can only
be used if the QB which is the game over
relay
has not been dropped because as the
game's over so it's not going to shoot
the ball back out
right so the game over relay is dropped
and it can't be reset until the whole
control bank resets right so that's
where we are with that now you'll notice
that the ball returns so the ball
sitting here
it can even if the game over relay has
been reset
it can only get power to that if the the
bonus unit as at a zero position so that
tells you what we need to do next all
right so we've reset all of our score
relays
but we also need to reset our bonus
relay
maybe we're up on 4000 or something
right so how does that happen
luckily while we've been resetting all
of the score relays at the exact same
time
a switch on sb2 which we know is dropped
and the score motor which we know is
turning constantly
has been pulsing the subtract bonus unit
so it's been going the whole time that
we've been resetting the score rules
now the S relay once it's done its job
and dropped sb1 and sb2 it holds itself
on
and then almost immediately drops out as
soon as motor 2B opens which will be you
know before one com one third of a
revolution of the score motor it has
three home positions so when the score
motor turns a third of a revolution uh
you're back to home right so at some
point within a third of a revolution
that will open
the
S relay
the start relay
no longer having anybody holding the
replay button will drop out its job done
by starting everything by hitting the SB
and uh sb2 reset relays okay so the
start relay is no longer in play
so over here
the sb2 is held in
but the S isn't so there's another pan
so this P that basically they have now
switched the power route over through
p5a so what does that mean so remember
our scoring thing we were on three and
then four
now we're up to five right player unit
5A
so player unit 5A if you're not at
position five
then it's not connected here it's
connected over here
power runs through and that's how we've
been
resetting all of our scores okay well
then once we get both of those set it
adds the player unit again right which
closes this so now with that closed and
that closed
it no longer can pulse
the player unit to go up anymore
so it's stuck on position five
right or what we're calling position by
p5a it's stuck on that position because
it can no longer get power through there
to step it up the way we were doing it
before right
so now the power routes down through
here through this side of the switch
as the motor turns that will close
and if Q has not been pulled in
it turns on you
[Music]
I know this is all super complicated but
at the time they are you know okay so
what pulls NQ
right
Q will be pulled in if you're not at
zero position on the bonus unit so let's
say you're at eight eight thousand on
the bonus unit well that means you're
not at zero so this power is over here
so with the ball sitting on the ball
return switch
and with the motor turning and the motor
turning and the anti-cheap switch not
knocked open
right power comes through here
can't go through there comes down
through here and has pulled in cue the
bonus relay which is holding itself on
and opening each time the score motor
turns right
but if the ball is still sitting there
and you're still not at zero it just
turns itself right back on right
so Q is held in until the bonus unit
gets to zero and then Cube turns off
well when Q turns off it connects that
switch
and the next time around
it pulls in you so where are we well
we've got we've got the score the score
is all reset and we've got the bonus
unit reset
sounds like we're about ready to play
ball right
so
U pulls in
now you
is
are you ready to see something beautiful
you
is the control Bank reset relay oh no oh
no
so you
closes
when it closes
we get to position 4C on the motor
and this switch closes right at some
point
U is closed
bam it resets the target Banks
and if p is closed whatever that does
bam it resets the other Target Banks and
then finally
with you closed
when motor 1B switch closes
bam it resets the control bank so then
what happens the game over relay resets
the the uh first ball relay resets
that was tripped from the previous game
right the SB relay resets the reset
relay the sb2 relay resets it's all
reset here we go
okay so it resets all that so now the
zero position bonus unit is at zero
because remember it was resetting
ball is sitting on the return switch
the motor is turning the motor is
turning right
and so the uh game over has been reset
bam that will turn on the o relay
so the O relay being turned on
uh
ball return
kicks the ball
into the uh
out hole I mean into the
um
kicks the ball out of the ball return
out of the out hole okay as the motor is
turning and XB is extra ball and all
that okay so it kicks the ball out so
you see it doing that right so as it's
kicking the ball out
it hits the trough switch
rolls over the trough switch
and pulls in p
oo boy this is getting complex people
we're gonna figure it out though
so now p is pulled in
right
okay so here's what we need to see so if
p is closed
right I personally don't think that the
motor can still be turning to that point
so basically
P pulls in and all of that whenever all
this happens they're all of these if you
look they all connect to right here
a normally closed switch on motor 2B so
basically whenever you get
back to the end
that switch will open
right at the end
so the last thing it does is kill all
those relays so with all of those relays
off there is nothing to turn the score
motor all of them are off
and you've reset sb1 and SBT so you get
back to motor 1C and the score motor
turns off after it's kicked the ball out
so it pulls in the P relay but if you
look the P relay will not start the
score motor
so the P relay pulls in and closes this
switch but the score motor isn't turning
so it can't step up the player unit
and the reason for that I guess that
could be turning but the reason for that
is because
the first ball relay hasn't dropped
ZB so I guess it must be you have the
score motor turning or it wouldn't work
the next time around so basically since
you haven't scored any points yet when
the ball kicks out that time it doesn't
Advance the player relay
okay so whenever we start we're on ball
two it shouldn't be doing that
it uh it it must be that the thing is
turned just slightly
I put it back on the way it was before
exactly how it was but remember it
wasn't working before
foreign
so if we look at this this is an
interesting thing too this shows you the
balls in play
so player unit now remember we're having
light two is on right as soon as we
start
okay so this is the wiper disc on the
back now look how they've got the
positions numbered
position zero and one will light up the
number one ball in playlight now why
would I do that it's because it's two
players so if you're on one player or
two player
either one will light up the number one
light well we're on two player I mean a
light two ball two so we're on four and
five but look how that is so it's zero
one and then it skips two and three and
goes to four and five now why does it do
that it's because this is set up for a
four player game even though this is a
two player game
so zero would be one player one would be
two players three would be three players
no two would be three players three
would be four players
and then once you get the four it needs
to tell it that it's ball two because
it's the second ball for each player so
the next four would be that blah blah
this is a two player game so we must be
on position
four or five
when we should be on position zero
okay so we need to try to figure out
where in the world that even is so it's
a brown wire that turns on the light and
it comes off of that unit the the wire
that connects to that is slate
in color so a slate wire connects to the
brown wire whenever you're at position
zero
so you see the two rivets that I'm on
there
if I pull that back I'm gonna just pull
that off
that is definitely the rivets that make
the light
ball to light come on so I shouldn't be
here I should be back on these other two
so it should be one two and then there's
two that are missing for the third and
fourth player
and then now I'm on the first rivet of
ball two
and we still have our light thing where
all the lights are on
you know I would just move this back but
the thing is that's how it was and
whenever it starts it it
it's on that thing and then it advances
up
so I'm wondering if it's a problem with
that extra ball
the the first ball
relay that switch
whenever you let me do it again now that
I've replaced all the light bulbs you
can see that it says ball and play one
so see how we're on Ball and play too
this is people often ask us how come you
don't film all of your work it's because
it's stuff like this you end up working
on stuff for hours and hours and hours
and I can't film all of this because
you know I'm not uh
the Svengali where I just know all this
stuff off the top of my head I have to
work through it and figure it out but
look how it's going to say ball and play
one
and then it'll move the two as the ball
shoots over the trough
see it
it went to two
so the ball going over the trough
Advanced it to two and it shouldn't have
done that and the thing that would keep
it from doing that it should Advance
each time the ball lands in there right
but the thing that would keep it from
doing that
is
that switch that switch is only open if
nothing has ever been scored on the game
it's the first
uh ball relay
so we need to look and see if that
switch is bent or not working right or
if it's already been dropped or what the
deal is
okay so here is our relay bank and here
is our labeling now notice that it
doesn't completely line up so but this
goes to this this goes to this and this
goes to this this is the first ball
relay so this is the switch that we're
thinking now
just so you can see what we did I
tracked it down to one switch that I
think is the problem
right
so we're going to look at one switch and
see if we got it right
and this is just how you have to
troubleshoot every little problem in the
game and remember we did it by looking
at the lights the lights are like the
clue usually
so this is so hard to see but here is
the switch snack see these are the wires
coming out of the top now it's a white
and blue I think actually because I said
BL that's blue a white and blue and a
brown and red wire
okay
so this is kind of tricky but here is
our Brown and red wire
attaching to that lug
and then the other lug is this red wire
that's a jumper actually
that comes over let me see what am I
looking at
no I'm sorry it's this
green jumper back here it comes over to
this
white and blue wire okay so all I'd have
to say
it is
when this trips this bar comes down and
hits switches right so as soon as you
score a point this will trip but at the
beginning of the game this is open and
the whole purpose of it is so you can
start a two-player game they want you to
be able to start a two-player game by
hitting the start button as long as you
haven't scored any points and they also
want it when the ball comes out of the
out hole that it doesn't Advance the
player unit because it's the first ball
and they know that because you haven't
scored any points and this hasn't
tripped
so if you look I don't know how I can
show it
okay
so the switch that we're looking at whoa
good Lord
is this not this front one
the one behind it but the two behind it
so there is a
short blade and a Long Blade when this
trips it will hit the Long Blade and
open that switch up there you go and
then there's a Long Blade behind it that
hits a switch behind it whenever this
trips but if you look
the back two switchblades
are already touching
so that's misadjusted that should be
open right now and then whenever this
trips
and hits those
it closes but if you look they're
already touching the back two
so these two should be touching the
front two and they should open like that
and the back two should be open and they
should close but right now they're
already closed so I'm going to spread
that out a little bit
and that might fix at least part of the
problem we'll see
okay so let's try it again I adjusted it
slightly here we go
[Music]
uh-huh ball and play one
but we still have both lights lit up
so let's look at that switch on the game
over relay that we were talking about
and uh
see if by chance that one's stuck like
the one was on the first ball relay
so on the game over relay it's blue and
black
and orange and black there's a switch
that connects those two that shouldn't
be connected unless the game over relay
is on
okay so the game over one is this tall
one
blue and black wire
is
the back side of this blade and yes the
same thing's going on I missed it
so when this closes
it should open
this top blade and close the bottom
blade but if you look
all three of them are touching right now
so that's why the light is on
so when this when the game over is done
it should go down
which connects that Long Blade and the
short blade and makes the lights tie
together so they're both on
I don't know what it does uh
on the top here let me see if I can find
that why does that need to be
connected and then open
so here's where we're looking it's not
supposed to be a make or break switch
but for some reason it is they must have
changed something
and there is another maker brake switch
for the uh QB relay that's right here
but all it does is it turns on either
the
ball and play lights or the game over
light depending on if the game's over or
not so if the game's not over it's got
the ball and play lights on once the
game is over it has the game over light
on but that's not the one we're looking
at
so I don't know some kind of mod but at
the factory I mean it's official but
they they added some other light on
there that uh I'm not aware of
okay so the one and two player lights
are on the Tilt light is on the game
over light is on
let's see what happens
[Music]
resetting the scores
ball and play one and
only the first player lights are on
fantastic but that wasn't our only
problem if you remember it would also
score on the wrong place and we'd get
scores on the one player and a two
player so I'm going to do it slower so
that we can see what's going on it looks
like if the ball came up it would hit
this switch but I think this switch is
only purpose is if this gate is open and
the ball comes out here that switch
closes the gate so that doesn't really
matter so it will come up here it
doesn't hit any more switches and then
it would score points by hitting
something on the play field
10 points
[Music]
okay
[Applause]
okay so it's a still one ball of one and
we're still scoring but we're hearing
some big thumping it's resetting these I
don't know if it's supposed to do that
sounds like it's resetting the targets
I'm not positive it's supposed to do
that
okay so we scored some points let's get
the bonus to go up
I don't know people
it's a little janky okay so we're gonna
lose the ball see what happens
nothing
at all happens all right
so we need to figure that out so when
the ball lands in the out hole what
should happen
okay so there's our ball return switch
the ball lands an out hole that closes
that switch the motor is not running so
motor 1C would be closed
motor 2B and anti-cheat now do does
motor 2B work yeah because that's how
all this other stuff was working that we
did earlier right
does motor 1C work
well it should because that's how Jay
turns on P turns on and O turns on which
we already know works because we oh wait
a minute
hmm yeah oh was turned on through there
uh
yeah through here so we've already done
this one time before we already got that
to work right but Q
should turn on if we're not at zero so
we were thinking Q must be turning on
earlier but we don't know that for sure
so the ball's there
this the bonus unit isn't at zero it's
here
right so Q should be turning on which is
the bonus relay
all right so I'll bet it's not and I'll
bet the reason is because that switch
isn't right but let's go check
oh by the way it could be that Q is
turning on
but it the switch on cue is not turning
the score motor on because the score
motor you never hear it come on
okay so the Q relay is definitely not on
and
these are the switches
that need to be closed until it gets to
zero
and it's specifically this one
so it looks like it's closed
connected to this smaller switch
but I'm not so sure that it's
detail let me see
I don't know it's definitely closed but
it might not be clean enough
it also on something like that whenever
you've got
the wire has to connect from there
through the switch down to the thing it
could be the Jones plug
where the the table plugs into the the
bottom so I'm going to get a multimeter
and check continuity between there and
where it needs to go on the on the
schematics
and by the way if you didn't see the
earlier videos there's some kind of hack
in here where they had a wire
tied to the flipper that turned on the
gate for the out hole the outlane
every time you press the flipper come on
people people why would you
why would you put a wire from the the
cheating people
that's probably illegal in in States
you've never heard of like the pinball
laws come on now
you can't cheat like people it's only
going to give you a little bit more
point it ain't worth it you could go to
jail
come on now okay so while looking at
that I figured I would see what the big
thump is too why it's resetting the
drop targets and stuff check this out
watch the relay Bank
foreign
it's resetting the relay Bank not
supposed to do that okay let's figure
out why it's doing that
okay so like we looked at earlier the
control Bank reset is done by you that's
the only way it can happen okay
and you
cannot pull itself in
right
so it's pulled in through this way as
the motor turns blah blah
through a player control switch but only
if sb2 is closed
so that has to be closed for it to be
able to do that
right so
that should be open there's no way that
should be closed so none of this should
be able to happen right so it's got to
be that switch
it's the same old thing white and slate
and red and white
when sb2 must be closed and doesn't open
whenever the thing opens
sure enough switch was stuck I don't
know how I missed all that I cleaned all
that
I must have been drunk when I did it or
something I don't know let's see if we
get anything better
now on a godlib too sometimes whenever
you reset it and it's on bar one that
screws it up because it doesn't go
through the proper reset
but let's see
I heard another thump I don't know if
that's good so what I mean by that is if
it if it doesn't completely reset the
score reels and kicks the ball out you
might have to turn the game off and back
on I've seen them do that before and it
has to do with when you turn the game
off
okay so let's see if we get any it was
whenever we were hitting these it was
making everything reset
[Music]
that's better and when you hit a drop
Target
it would
it would reset the drop Target
okay
9 000 points but we're just trying to
get it Advanced from ball to ball
oh snap it's trying to do it come on
Ball and play number two
all right so folks it's pretty late okay
we fixed a lot wouldn't you agree that
we fixed a lot we've got the thing
playing here let's see I wonder if it'll
end the game but obviously it still has
lots more problems so we still got
another video to do
[Applause]
we got a long ways to go people
foreign ball three I wonder if he's got
it on five ball
[Applause]
boy people feel strongly about that
don't they
he's got on three ball boy that people
will
people will be upset about that
look at this our match unit ain't
working right but our lights are coming
on
okay
can't match unit thing's gonna drive me
crazy we rebuilt this in the last video
too everything that I showed you how to
do in the last couple videos
ain't working right
you're going to ruin my my cred here
there we go is that supposed to be
I'll have to edit that out
note to self edit that out okay so uh we
got it kind of playing a game you saw it
started and it stopped it moves from
ball to ball it's scoring on one player
it's turning the lights out we got a
decent understanding of how the reset
works
but we still ain't there people this
thing still needs some work the
gentleman said that he already did the
Playfield and it has been done but it
needs some work there's some like bulbs
that aren't quite right and stuff's not
scoring right so we still gotta mess
with it we got a lot of little issues
little little alligators we got a Beat
uh so there you go folks I hope you
enjoyed it so far leave your comments
down below make sure to give us a thumbs
up for staying late and taking the
trouble to film all this for you I'd
already be done if I didn't have to film
it
right
but we like doing that it's fun right so
leave your comments and let us know what
you what you think hey do you want to
know how you can support our Channel if
you enjoy videos like this
I can tell you how you can do it for
free kinda right
if you find yourself in a situation
where you have to dig in your old cobweb
filled wallet or purse or pocketbook and
pull out some of them Ben Franklin's and
buy something on Amazon or to some of
those uh George Washington's
who's on the dollar bill is that
Washington I haven't looked
yeah yeah I'm a five dollar bill man
myself
uh if you have to spend some money on
Amazon if you use our link to go to
Amazon it gives us a percentage of
whatever you buy it so how does that
work why would they do that it's because
Amazon when it's when they started as a
bookstore they didn't want to spend any
money on Advertising
so what they did was they came up with
the Amazon Associates program so they
would make these little accounts where
you could get a link and basically
advertise a book on your website
uh and if anybody clicked your link
there's a little uh some numbers and
stuff in the URL that tells them hey uh
this came from so and so Joe's video
games
they advertised and sent us here so if
you use our link below this is basically
an advertisement right uh it sends us a
little percentage of it because Amazon
tracks all that stuff and they're
actually pretty good about it I don't
know how much money they steal
you know there's really no way to know
that I've had people tell me that they
bought stuff and then it did not pop up
I don't know but most of the stuff
people tell us that they bought does pop
up so we appreciate that and actually a
lot of people are doing that so we
appreciate all of you that are doing
that and again it doesn't cost you
anything you don't have to sign up for
anything you just simply use our link to
go to Amazon so thank you to everybody
that's been doing that it adds up every
little bit helps oh and by the way you
don't have to buy anything expensive and
we don't want you to buy anything you're
not going to buy anyway but if you're
planning on buying something that's a
cool way to help us out so we appreciate
everybody that's been doing that if you
can't do that or you don't want to do
that that's fine too just keep watching
our videos we appreciate having you here
last but not least don't forget to check
out my brother Donnie my brother has his
own channel here on YouTube and do you
like how I'm framing this video here
look at this I'm not even going to say
it out loud y'all see what's going on
here yeah you're going to get that yeah
don't worry about it it's coming what's
that oh what are we looking at here oh
Lord what is that that's right one of
the only banana flipper games of all
time is right here in the shop
uh check out my brother Donnie we work
on pinball machines arcade games and
jukeboxes my brother Donnie works on Old
buildings uh Vehicles stuff like that
works on the farm and I'm over there
with them uh Raising Cane from time to
time so I'll see you over there on his
channel we'll do another video on this
I'll film it tomorrow night uh where
we're working through some more of these
uh little issues and I think we're we're
progressing though right we're finding
all the places that I missed the first
time I went through
and getting it working a little bit
better so we'll see you next time hope
you enjoyed hanging out