838. Altered & Hand Trim a Triangular Tripod Vessel with Hsin-Chuen Lin 林新春 三足三角形花器修坯示範

Hsinchuen Lin
205 followers
11 Video Views·Feb 12, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
um I'm just getting a pedal and try to
pedal on the side of
it okay so this is what it look like
after after I P it to alter the shape
little bit further on the bottom portion
so it go with the top portion you have
triangle on top and triang on the bottom
I will let it dry a bit more and then
I'll flip it over and then try to push
the bottom portion and push it in so I
will have a three ft and for doing so
you don't need to Li the clay too thick
on the bottom cuz you're going to to a
push it in so it doesn't it doesn't need
to be that thick just the regular size
is somewhere between like 5/8 of an in
to 3/4 of inch thick that's all you need
all right and uh tomorrow I will finish
it up further to show you all the
details so I'm waiting further to let
the uh the foot dry a bit more and now
it's a time to use the the padal to push
it
down before I do that I use a u my
number seven knife to remove a little
bit clay from the side cuz usually the
base is slightly
thicker all right and I'm going to use
the pedal to Force the tong to push the
tong
okay I will show you the inside look
like after I push the clay in so from
the camera here you see the inside the
camera there you see the
inside and you can see that clay been
pushed by the
paddle and now all I need to do is using
this knife and this tool is called Sho s
u r f o i m to just hand trim it to
remove the clay so it will be more ankle
here and less clay here on the bottom
all right after use my seven number 7
202 shave here um to shave the foot I'm
using a needle tool to do the fine
tunb to remove the clay so it will be
smooth
then use my whole puncher to smooth the
further cuz this is the curve on the
foot so I find out this tool is good for
doing that curve to burnish it and
smooth further on the foot
all right so this is the final finished
piece of the Triangular and tri part of
the ikip vase and trim it pound it and
trim it and refine it took me about 40
minutes to finish it so that is the
final product and uh hope this process
help you to uh get your own
creation and thanks for watching and see
you next time
