Repairing A 120 Year Old Clock With Lions On It, Like My Last Name!

Amateur Repair Time
257 followers
1.1K Video Views·Jan 12, 2025
ladies and gentlemen welcome back to
amateur repair time I have a clock so
big on my desk that you can't hardly see
by it to see all the pr beautiful stuff
in the background there we are going to
be working on this clock today um I saw
one of these online a while back and I
kind of wanted to get it this is a you
know like a gingerbread clock they call
it or some people call it a rooster
clock or some people call it a kitchen
clock but these were popular back in you
know 1900 1910 1920 and they had these
kind of pressed wood fancy headdress on
the
top and I saw one of these online and
liked it because it has Lions on it so
uh if you don't know my last name is
lions and I just thought it was cool
that it had the Lions on it and about a
week later a friend of ours uh called
and said that he saw a clock at the flea
market and wanted to know if I was
interested in it and I said yeah if you
get a good deal on it so I think it was
20 bucks
um he bought it in Chesterfield uh South
Carolina and he brought it over to me
and when he brought it to me it was this
the one that I had seen online with and
it's not this exact clock I had just
seen another version of this um the one
I saw was lighter color um but he just
happened to find the exact same
design without knowing it he just saw an
old clock and and called me and asked me
if I wanted it so I didn't know that
that's what he found but it's so hideous
that it's beautiful look at it and it's
really tall it's probably 20 in
something like that we'll just guess
that um the little thing at the top I
think he did it he's an older gentleman
who is not always
as uh um careful with the stuff that he
buys as he should be so he threw it in
the back of his truck and I think it
snapped
that but we'll see if we can glue that
back you can barely
tell uh I don't know how much we'll be
able to clean up the actual wood cuz
it's this it's this kind of it almost
looks burnt it's like this really
hardened I guess maybe it's
the whatever the varnish was that was on
it does that you see that so I think at
one point that would have all been
smooth but now it's almost like a
alligator
texture um I've got several that are
like that I don't know if that was just
a style they did or if they just painted
a certain varnish on it or someone did
at a clock shop or something and it just
does that over time but it's it's got
like a rough finish it almost feels like
sandpaper um and it's black it's not it
wasn't stained um a lot of times you'll
see them they look they got kind of like
a walnut looking
finish but nope this one's black but
that's fine we'll clean it up the best
we can I don't know that we'll get that
to look that much better though
now the
dial has the I think those are called
the Arabic numerals on it this is
amateur repair time people so I have no
clue what I'm doing but I think those
are the Arabic numerals and it says made
by the New Haven Clock Company New Haven
Connecticut USA I would guess 1910
something like that unfortunately
somebody has written in pencil or P or
pen or something something a number on
the dial
965-6569
65656 I have no clue what that is maybe
a kid was messing with
it and I have no clue if the movement
that's in it is a New Haven Clock
Company movement I guess we'll find out
but a little while back I got an
ultrasonic cleaner and I've been
cleaning some watch movements uh watch
some clock movements with that and
having a good success I've fixed a
couple of them doing that so this one I
don't know what all it needs but I
imagine it needs a good clock cleaning
so we're going to take it apart clean it
and then see if we can get it to keep
good time so I can display it here in my
office I have an entire
shelf over here or not shelf a whole
wall over here of these kitchen
clocks and then a couple more and then
in the other room I've got a whole bunch
of them and I just think they're really
cool to me it's fascinating that the
things are over 100 years old and they
still work if you work on them a little
bit they might need some bushings or
just a little bit of work but you take
them apart and clean them and they still
work even though they're 100 years old
it's just amazing to me this one still
has the pendulum hanging on it and it
looks like if you give it a little
go it's at least trying to keep you know
to
work so it may be fine but we're going
to take it apart and look at it and it
can't I guess it it wouldn't hurt it to
uh clean up the movement and look and
see if it needs bushings or whatever I'd
like to get it where I can display it
I've had this sitting in the closet for
a while since uh Jean bought it for us
but um it I'd love to be able to display
it here and clean it up a little
bit you can see right here I mean it
kind of looks like that's something
they've added
that that
coating what it looks like to me I'm
sure it's not but um um I don't know if
you've ever seen old telephone poles
that have been soaked in U kerosene or
is
it is it kerosene or something that
sounds like it cre kosene something like
that if you take an old telephone pole
and they used to be soaked in this black
oily stuff that made they they never rot
it just preserves them so I don't know
if somebody used to do that to some of
the clocks or or what the deal is but I
have several of them that look like this
now I don't know and you can see on the
inside
here it's not
as
pronounced you can almost see where
they've painted something on it so I
don't know but we'll leave it how it is
I'll I'll try to clean up some of that
looks like paint dripped on it or
something there's some paint down here
if we can get that cleaned up and get
some of the dust off of it I think it'll
look much more
presentable and look that it it has
stopped so it definitely needs cleaned
um
so I think first thing we'll do we'll
pop those hands off and then we'll pop
that face off and uh we'll go from
there all right well it does appear to
be a New Haven uh movement they're all
very similar you know I'm not a it's
amateur repair time but they're similar
to the Ingram and sessions and Gilbert
and and Sonia
andonia movements
um so it's very similar same kind of
setup so that's probably the original
movement or close enough to it you can
see the wood there behind it doesn't
have any kind of stain on it at
all so maybe we can tell if that's
something that was sprayed on there or
what some of you probably know the deal
and maybe you can tell me down below why
does it get
this textured rough finish on it is that
original or or is that just how the
varnish
is you know it could be lacquer and the
lacquer has done that and if you rub a
little lacquer thinner on it it might
reactivate it and smooth it back out but
I'm not going to go through all that
um my key looks close enough to original
for
me I'm not too concerned about
originality um the face is interesting
it's painted I didn't realize that they
were like that I thought they were all
paper but that is
painted and since it's
painted I wonder if I can't get that
off or is it not painted is that paper
it does look paper like paper there
doesn't it h
see it bunched up around
the skin there I believe it's
called I mean that's I guess that's
paper I still might be able to clean it
I think I'm gonna try to get that number
off of
it uh I wonder if I wish I had a pencil
eraser maybe it's just pencil um if I do
get that discolored in there it won't
matter you can just have that whole
thing look discolored it can't look much
worse than having numbers written on it
I'd like to kind of leave this how it is
maybe clean it up a little bit if it'll
do it um but I would love to have that
gone but you know I don't I don't need
it to look perfect or anything but it'd
be cool if that was a little
cleaner um let me see if it does
anything
easy all right so I was able to wipe it
down get all the dirt that was loose at
least off of it or most of it um clean
it up a little bit cleaned up the glass
none of the pressing came off of it so
that's good I was able to clean up the
dial a little bit I didn't go crazy with
it I got most of the number off so it's
at least lightened where it's not as
obvious now also there will be um the
hands in front of it you know so
whenever you look at it your eye is
going to be drawn to the hands not
necessarily what's left of the numbers
there I cleaned up the face just a
little bit over here I didn't want to go
too crazy though because it would take
off some of that ink so I'm just going
to leave it like that personally I don't
mind if they have a little wear on them
if they look uh worn that looks fine to
me I just hate when they look filthy or
they look vandalized you know I don't
really like
that um I got the white paint off the
top and the little bit off the
bottom where it was though if you look
close when the paint came off it took
off whatever that lacquer or whatever
that is that's
that's caused the problem problem on it
right so it took that off too so looks
all right these things are not super
valuable and I don't want it to look
brand new or anything I'm just trying to
make it a little more presentable
because I'm going to set it on my shelf
here so I can look at it all of the
time so on the movement we need to mess
with it so this is a New Haven and it's
a little bit different like I said but
it's pretty much the same setup as the
other ones I've been
doing um it's a recoil I believe that's
a recoil um
crutch let me let me
try stepping it a little bit and see if
I can
tell yeah it's going to be a recoil see
how it bounces back and forth a little
bit you can you know you can tell by
looking at the
uh the pallets too because they're not
both curved
so okay so that's cool I didn't see like
crazy bushing wear where it needs a
bushing this is probably the worst is
actually on the escapement
wheel a lot of people would probably put
a new bushing in that but I'm an amateur
I can do a bushing but I just as soon
might screw it up as get it right so I
think I'm going to just live with that
if it'll keep
time um but you know that's kind of
borderline these things are made where
they'll run sloppy I mean they can they
can be about SLA the hell worn out so
this is the governor and if you look see
how it's also got wear in it I mean not
wear but play in it that's just how
these were like these American made ones
were not super
precise in the construction I mean they
kind of were because it was all stamped
out but they didn't make it where
everything's real tight they run loose
um you can do that with every
pivot in
it see if I can get another one that's
loose enough that I can mess with
it and we'll see more after we clean it
but that one's pretty tight but it might
have
um it might have pressure on it too so I
don't know so there's definitely some
wear there though you know like I said a
lot of people would probably replace
that but these recoil Escape Wheels
usually they don't even have to be close
and they'll run so we'll
see on these American ones now if you
get like a really
nice Swiss Movement yeah that probably
has to be really
precise we just don't have a ton of wear
on
anything this is the wheel that was
really worn on that last one that we did
and it's tight on this but that last one
was a um
Ingram so I mean they all look good to
me I was kind of hoping to do one just
to you know I want to do some more
bushings just to get it under my belt
but I'm not going to do them just for
the sake of doing them I I honestly
think a lot of people online you know
you you read online about all this and I
guess this is going to piss a bunch of
people off but I don't care um they
don't they don't appreciate me working
on these anyway but I have seen a lot of
uh people that are really good at
working on these that will replace like
every bushing in them and I personally I
don't think they need them I think
people just do it because it's their
Hobby and they like doing that so they
try to get it
perfect so you know the one that I
replaced the bushing on and again I
don't know what I'm talking about this
is amateur repair time the one I
replaced the bushing on I left it a
little loose I put a i purposely put a
bushing in it that was a little loose um
because I didn't know for sure that I
had to think
perfectly back where exactly where it
goes so I left a little bit of play in
it just in
case um but I don't see anything in the
that it's just obvious it needs a
bushing with the exception of that one
on the escapement wheel I'll bet that
would be the first one people would
replace if they know what they're
doing um this is the back of it
here or is
it where is
it yeah that's the back of it there
when I play with this the the I think
that's the fourth
wheel I don't know if they call it the
fourth wheel but if if I play with that
you get more play in it actually so you
know those two pivots would be the two
that you would replace if you were going
to replace them but I think it's going
to run fine without
it okay so there's where we are so I
need to uh catch the springs and then I
need to pull them all out and take
everything apart and then we'll put it
in the ultrasonic and clean all this up
and then carefully reassemble it so the
way I'm going to do that is you can I've
got these clamps that you can put on
here but the problem I have is I can't
see how you get them back
out after you put it back together like
I need to take them back out so I don't
I don't completely get how you do that
so what I've been doing is putting
straps around it zip ties strong ones
that won't break and kill me um put a
strong zip tie around it to hold it
while you disassemble everything and
clean it including the springs and then
put it back and it keeps everything good
and then you can easily cut the strap
and remove it after you're all done
those
clamps if you put it back in I don't see
how you would I guess if you can get it
on you can get it off I don't
know H I guess I could try it and if I
could get the clamp on there I could
just as easily get it off let me go grab
them maybe maybe I can do it and I just
don't know what I'm doing
here is the puzzle so that is a pretty
tightly wound uh strike uh main
spring and yeah that clamp would hold it
but how the hell would you get it on
there like it don't you can't get it on
there you have to take it from one side
or the other and that's the whole
problem
um when you buy these new they they just
have a wire wrapped around it and you
put them in and then you cut the wire
after you wind it up uh you cut the wire
so I'm doing something similar with my
zip ties I had somebody the other day
suggest oh you need some of these clamps
I've got them but they're useless for
what I'm doing I
think I don't know I don't I don't think
you can use these on this there must be
another way I haven't quite figured it
out and if you even if you got bigger
ones I don't think it would work cuz you
wouldn't be able to get them in there
look you're not going to be able to get
anything any bigger than that in
there it's a conundrum people I haven't
figured it out yet it would be useful to
take the
spring off of the
wheel off the Great Wheel I get that but
to take them actually out of the
movement I think a zip tie is the way to
go that so far that I've figured out so
I'll show you whenever we take it apart
all right this is everybody's favorite
part they want to see if the spring
reaches out and touches me so I took the
uh this particular one has little 5/16
brass nuts on it it's pretty cool there
there there and there and and then
there's a little tiny one right here
that's on the hour
wheel
um I don't know if that's actually
called the hour wheel because this is
the hour this is what the hour hand
attaches to but this Center wheel I
think it's called is the minute is what
turns the minute wheel but that drives
the second wheel which drives this which
is connected to the hour hand so it's
the one that does the 60 to1
reduction all right so I have
um tied off the
springs and then I have uh Unwound both
of them with the click the click uh the
click and we'll see if there's any juice
left in
[Music]
them this one's moving just a little bit
but I think we're going to be all
right the regulator has fallen out woo
little bit there's always like a little
bit left that it jumps at you with which
is why you need the zip ties and to keep
your fingers away from it there's the
regulator and you know of course I'm
trying not to bend any teeth or anything
which is another thing that could happen
if you uh leave those things W up
whenever they
unwind it can
easily take a two off of
something we're coming out with
the with the
strike it's got a little spring on
it all right so there's that
plate with
our
wheel on the ingrams it comes out this
way but on this one I guess it comes out
that
way and on the ingrams this Lantern is
farther down on this one it's kind of in
the
middle but it's a completely different
setup really this it works since it's a
recoil it works completely different I
mean it's they're all similar but
it's pretty
much all right and this one only has the
one lever and it's kind of right in the
middle for the count
all
right everything looks fine it's just
all dirty and greasy and needs cleaned
real bad it's like actually sticky and
it's probably from oil they probably
just over oiled it which I think is
probably pretty common it looks like you
only need to put like just a little drop
of oil on each
pinion right where it goes in the plate
and you don't need to go right where it
goes into the plate and you don't need
to go crazy on
it so here's the fir we'll keep the
first we'll keep these separate on this
side cuz I don't know if these are
identical on both sides on some of them
the first wheel is the same on both
sides but not on this one okay yeah
these are like clearly
different
um it looks like they're probably the
same with the exception of the strike
side has this extra gear on
it but they're actually
um the main wheel looks like it's in the
same position on both of the the I'm
calling this opinion I guess that's what
it's called um they're in the same
position it's just on this one there's
this gear above
it so when we go to put it back we'll
figure out what that
does and then the two wheels with the
little things on it are both on that
side this side has neither of those
H I believe that's right I'll have to go
back and look at the tape one of those
could have been the
uh one of those could have
been the fourth one over here because I
think I was saying that there were four
um oh yeah okay one two three four and
then the escapement I'm still learning
folks
obviously so let's see if I can lift
this up out of
here or if it stays yeah see that that
wouldn't even hardly move so obviously
that's going to be a problem with the
thing
running you can see all the green stuff
on the post it's one of those things
where you can't just you can't just mess
with a little bit it needs to be
completely cleaned a lot of people would
say that I need to take these Springs
off and clean the wheel separately and
all that and clean the spring separately
so I'm not even doing it the prop way
obviously I'm still you know just doing
it the best I can this is interesting
too on this side on the time side they
have the uh
loop for the hint for the spring instead
of around the bottom post which it could
go
around they have it around this post
here on the
top
that and I don't know why cuz you could
just as easily put it down here couldn't
you that's that's how they have that one
and it wouldn't change the way it's
wound but that's how they had it so
that's how I'm going to put it
back okay so that's what we're starting
with you can see the green and there's
just a bunch of nasty oil and grease all
over it I don't even want to touch
it
um so we're going to take all this I'm
going to put it in the ultronic
cleaner for about 20 minutes and then
I'm going to let it sit in there for
about another 20 minutes and then I'm
going to get it off and rinse it get get
it all out rinse it off dry it off wipe
it down get all the water back off of it
so it doesn't leave a bunch of stains on
it and uh we'll go from there I believe
this is correct how it was hung up there
to the
left I don't think I moved
that I think it does go like that but
we'll look at that too whenever we get
ready to put it back together putting it
together is the fun part any idiot can
take it apart
I hope I remember how it
goes all right so I got the stuff out of
the ultrasonic cleaner and messed around
with it for about an hour I usually do
it in two usually I put the plates and
the uh Springs and I put the pendulum in
as one and let them do their thing and
then take them out and while I'm
cleaning them and drying them or rinsing
them and drying them I do all the other
gears and the smaller
stuff um this it the thing just that
Ultrasonic Cleaner just amazes me it
gets everything much cleaner than I
could get it by
hand
um you know this is this thing's you
know about a hundred years old a little
more than a 100 years
old it's just in great shape really
um once you clean it up a little bit
there's some pretty heavy wear around
that Center hole
look on the front it's
even look at
that I didn't expect that I I don't know
why it would do that around
the that shaft but whatever doesn't
really
matter okay so I'm going to put the
stuff back on um I'll carefully put it
in place where I think it goes and then
make sure I've got it all in the right
spot and then uh we'll try putting the
front plate on after that
but so far so good everything looks like
it's in good shape oh I wanted to count
Parts I didn't take this off so if you
leave that on you've got one
two three four 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 you've got 21 Parts
not counting the
pendulum and that's counting the the um
the uh pendulum leader and the
crutch so 1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19
20 21 I guess yeah so that it's really
not that big of a deal and once you do a
few of them you kind of figure out you
can you can kind of tell what goes where
cuz they're similar they're in slightly
different spots so this one you know has
this look how much that cleaned up just
in the Ultrasonic Cleaner this one has
that hour wheel that goes there on the
uh ingrams and stuff like that your
Center wheel is here and the hour the
hour
uh whatever this gear is the the shaft
is up above it so it's kind of backwards
on this but they're all very similar
all right so let me see if I can lay
everything out where it goes and we'll
go from
there okay so I think I have got
everything back where it goes um I've
got the two these things have some kind
of white dust on it I don't know why
that is and this didn't clean up
completely well but um got both of the
great Wheels
in then on the time side the first wheel
the second wheel I think this is the
first wheel first second third fourth
and then the
Escape wheel is going to go right down
in there whenever we put the plate
on um another difference between this
and the Ingram that we worked on was
that the on the on the Ingram the Great
Wheel actually drove the center wheel
directly on this one it's using the
first wheel to dve or the second wheel
to
drive and then that little gear thing we
were talking about that does the uh hour
uh there is a lever down here for the
gong of course and there is just
basically it just has one pin sticking
up through here which is going to
interact with this wheel which is really
similar to how the Ingram was done and
then the lever on the Ingram was up here
but it's down a little deeper in the
machine tied into this wheel the Third
Wheel I guess um and we'll be handling
the count wheel there's the gear on top
of the uh second wheel is going to turn
the count wheel the count wheel itself
has an interesting little thing that's
slightly different
too it's kind of hard to see what's
going on
but there are two little deep drops
there on each one that's so that it can
strike on the half hour as
well so for instance here it would like
it would come up out of here and then it
would go d d d and fall down into that
hole so it would it would uh strike
three and then when it gets back around
to the half hour on the bottom of the
center wheel there is a
little you can see it in there that
little thing that little cam
is going to press the you can't really
see it but there's a hook down in there
that it's going to press which is going
to free all this up again to make the
strike side turn and when the strike
side turns that's going to pick up out
of the the
uh um the count wheel again to strike on
the half hour and then it'll fall back
down into that
spot the one next to it so it's it's got
a D
Groove so that on the 30 it can strike
as well this an interesting way that
they did
it okay so I'm going to try to slide the
plate back on hopefully I've got this
all correct and then we'll go from there
all right so I got it all back together
this one actually went together a little
easier than the Ingram um there's just
there was one extra Post in the Ingram
and it just this stuff lined up a lot
easier and plus since it had the nuts
instead of the pins it was really easy
to just uh start at the bottom and put a
couple nuts on it let it go I didn't
know where they had the
spring so I just looped it around the
frame there I think that might have been
where they had it and then on the other
one it's looped
around the frame on the bottom so I
guess you can see it from the
back yeah so I've got it popped out
there the spring for that
one I don't think it really matters just
as long as you get it on something to
give it a little
tension um and if I give
it it's hard to do this with one hand
but basically if you pull this up so the
the
um the minute hand as it turns around is
going to push this up and then if you if
you start spinning
this boom
am I going the right way I might be
going the wrong
way oh it fell back down in the hole cuz
it was the half
hour
well that's the way
you see it trying to go back into the
count wheel but it count because it's
counting and it's doing its thing it
appears so now if I do it it can't do
it dropped the camera
this side it's a little bit harder to
show you but it's working right too
because I put the since I put the U
crutch on I don't know which way I'm
supposed to put
tension if you do it just right you can
get it to walk a little
bit or I guess I could just do it by
hand see how it goes backwards a little
bit that's cuz it's a
recoil instead of a dead
beat but anyway I can get that to move
too like if I if whenever I didn't have
this on if I just pushed the wheel I
could get the whole train to spin so I
think everything's cool so I'm going to
put a little bit of oil on it I'm going
to uh wind up the springs and release
them they're held in place now um I've
got the one nut I got to put back on I
forgot that
one and then we're ready to mount it
back in the clock hang the pendulum on
it and see if it'll tick and
talk all right I got it mounted back in
there um that pendulum really cleaned up
I didn't even do anything to it I just
put it in the Ultrasonic
Cleaner um on one hand it's a little bit
too clean but on the other hand it
appears to be original I think
that's a really old one that's not a
reproduction or anything um so it's
pretty
level you can bend the crook just
slightly the crook the crutch just
slightly to
basically on the center line you want
this the pendulum to be equal distant
that way and that way as it ticks and
tocks tick tock tick tock tick talk you
want it to be in time
right um the one in the background's
slightly out of time but you get the
point um so you can you can bend that
just slightly one way or the other um or
You Can level the clock as well I think
it's pretty level right now but and the
movement seems level but I think I've
got it in
beat and so you can see how the escap
kind of bounces
backwards that cool recoil
escapement which is basically what's in
most of these you know but it's just
what a
design so cool so I think the thing
cleaned up really well by the way this
thing here that's
broke is um I
believe that would have been a little
lever that comes over and rides on the
our hand to to uh make a uh an alarm
work not not the strike but the alarm
that you could set if you were using
this movement in a clock that had an
alarm this particular one just has a um
the strike coil so all right so I'm
going to put the um face on it and then
we'll put the hands on it and uh see if
it'll keep time all right I had to
adjust it a little
bit you see it's not quite recoiling as
much now basically it stopped after a
little
bit um and it was
because the crutch I had it bent in such
a way that this the pendulum leader
wasn't in the middle of
it so now it's right in the middle of it
so that it's not dragging or
anything and it's been sitting here
running for 10 minutes now um but it
doesn't
have basically the pendulum it's only
going to swing like that it's not going
to swing real wide earlier we had it
swinging wider and you had more of the
recoil going
on but I think that's more on
it it's pretty relaxing listening to it
isn't it okay so now I'm going to put
the face
on all right so I got the face back on
and the hands back on the face like I
said it looks pretty good um you can
still see those numbers if you look
close enough but
I think it looks great
um that little thing there is attached
to that lift arm so that you can set the
hour so we're just after 11 I don't know
what it's on but it's probably not 11 so
if you lift that up you'll lift that arm
out and it'll chime whatever it's on and
if it's right you just leave it and if
it's not you just keep going
[Applause]
so that's one or it's
[Applause]
30 what is that it could have been 1230
and then that might be
[Music]
one so okay so that's two so it's going
to do 230
[Applause]
and then
[Music]
[Applause]
three oh who I didn't that that wasn't
[Music]
[Applause]
[Music]
right says
four 430
[Music]
[Applause]
five
[Applause]
530 you get the
point 630
it's going to take all
night well you get you get the
[Music]
deal what do you
think oh and I put glue in it while I
was waiting on the parts to
clean got the head glued back on
nice I think she's running really strong
I mean it's got a nice swing on the
pendulum
I looked the clock up it looks like it's
from uh
1907 it's listed in a catalog in
1907 they came out with a line I can't
remember the name of it but they came
out with a line of three or four clocks
that had pretty intricate Engravings and
one of them was this one with the Lion's
heads on it um it's not particularly
valuable I mean it might be worth a
hundred bucks something like that but I
love the things I just like them if I
had enough room and I may have enough
room room
eventually I mean I could I could put
them in my warehouse or something if I
had enough room I would just display as
many of them as I could get I just I
think they're cool as hell like it's
just one of the coolest things ever I I
really love old radios and I love old
clocks old clocks are kind of like the
first great invention in my
opinion somebody came up with the idea
to make something that that keeps time
and it has to be dead on it you know to
every 24 hours and all that it's just a
brilliant brilliant brilliant invention
and then radios were like the first
great electronic invention in my opinion
you can send somebody's voice through
the air you know where you can hear them
they can hear you way over there you
know that's just so
cool so uh I love old clocks and I love
old radios so there you go folks that's
a New Haven uh Clock
Company
uh 1907 clock with Lion's heads on
it my name sake maybe maybe that's what
I was named after this clock or
something well no I think we were around
before then but anyway
whatever um if I find another one that's
in a different color I'll probably buy
it too um they made I think three colors
there was a like a
oak um a walnut and then I think this
might be the popular version of it uh
which they call dark
would
so I love it so there you go worked out
pretty good the Ultrasonic Cleaner is a
lifesaver but the movement was in pretty
good shape already you know it didn't
need any bushings or anything like that
but there you go I hope you enjoyed it I
know I did another one fixed I'm going
to watch it for a while to see if it
keeps good time or if it's too fast too
slow you can adjust that with the
pendulum if it's not too off if it's too
off uh it may need uh some work on
bushings or something on the uh movement
but um I think it'll be all right and uh
I can put it up here on my wall and
display it and we'll fix another one one
of these days um we'll probably have to
get back to working on some of these
radios pretty soon though I got to fix
some of them too all right so I hope you
enjoyed it hope this a good little
Sunday video for you and we'll see you
on the next one leave your comments down
below see you next time on amateur
repair time
