Putting This Beautiful 140 Year Old Ingraham Clock Back Together.. Will It Tick-Tock?

Amateur Repair Time
257 followers
4 Video Views·Jan 7, 2025
ladies and gentlemen welcome back to
amateur repair time now if you didn't
see last week's video uh we have been
working on this Ingram clock that I got
and a whole bunch of stuff that I bought
off of a uh a guy's family he had passed
away and his son sold me all of his
clock stuff so this guy was a old school
clock
guy uh the stuff was in the biggest mess
I've ever seen at his house it was just
literally thrown everywhere all over
over his house and all through his shop
and there was just tons and tons of
clock equipment so it's kind of how I
got um it wasn't the first clocks that I
bought but it was most of the clocks
that I bought so a lot of the clocks
that I own I got from that deal and I've
fixed uh like one or two of them so far
so I've been trying to get back into
it and uh a couple weeks ago I got a
Ultrasonic Cleaner which has really
helped me clean
Parts out of these clocks so this
particular one is an Ingram I think it's
from from about
1886 something like that somewhere
around through there and um I
uh I've been trying to get this sucker
going cleaned it all up it's had a few
little issues but we're ready to put the
movement back together I put a bushing
in it last time if you didn't see that
video go see it and you can see kind of
how the stuff looked before I started
messing with it and also see a little
bit more of the story about how I found
it um but today we need to put
everything back in the movement get the
movement mounted back on the back plate
put it back in the case uh and all of
that good stuff so um I'm waiting on
some parts hopefully I'll have before
the video is over ordered new glass for
the uh for the dial which
is look at that it's black I like that
and again this is from the 1800s it's
pretty old um I think everything we've
got here is good to go nothing appeared
to be too worrn or anything we just need
to get it all back together I've got
these three posts here I have to put in
and then hook the Springs
back so that we get the strike and
everything working and then we need to
hang a pendulum on it and all of that so
let's see what we can do so the first
thing I'm going to do is take this plate
back off the top plate and then lay out
everything where I believe it goes on
the movement and then we'll slowly put
it back together okay so I think I've
got everything placed in there where it
goes if I don't I guess I'll end up
having to take it back apart and do it
again but I think I
do
um I'm not sure about this one I think
that's right this one I think that's
right so we'll try putting it all
together so this
plate it's going to slide down here over
the
um Center wheel
main
wheel minute wheel whatever it's
called and then from there I have to
slowly try to put everything in its
place and I'm going to start from the
bottom and work my way up Tricky Tricky
Tricky let's see if I can see it good
enough with my
eyeballs I should have put this in
before I put the plate
on three of the things in there have
Springs on
them so that that's always
tricky and then this
one has to kind of go right in the
middle of
everything and it has to be on the
outside of the top
plate yeah I should have done that while
it wasn't on there
yet so you have to have this in
here like
so it's like a big jigsaw puzzle and
like I said the three uh bars
I guess I'll call them bars I don't know
what they're called them
um have Springs on them so you have to
get them just right if they pop out of
their pivot I call it a pivot I think
that's right this is one of them the
spring means that they will go all over
the place
so so it's kind of hard to see where
everything is you just got to take your
time try to get everything just
right and eventually it will all line
up and go right where it's supposed to
go and we'll all be so
happy and then the whole time too you
got to make sure that you
don't bang yourself a good one with one
of the main Springs and cut your fingers
off I don't think that's going to
happen but do I 100% know it's not going
to happen well no it might
happen all right so that one is in there
the two main Springs are in there the uh
two pins down here are in there so we're
kind of just working our way up that
post you know the post is in there so
the main wheel I think this is called or
the minute
wheel it's in there so this is a big
problem this second wheel is way
off all right so it's in
there and this second wheel is in
there so what is hanging us
up that's in
there so you kind of just fish around
till you find one somewhere is like
hitting the plate and that's why it's
stuck up in the air because that
particular one is hitting the plate so
you kind of got
to go around and figure out which
one is stuck hitting the plate
and it's usually one of the
ones it's usually the next one up you
know
and whenever you find that
one you pop it where it goes and it
usually makes everything go down just a
little bit more and a little bit more
and a little bit
more and of course you don't force
anything because it's all pretty
delicate and we'll only go one way
so it appears to be this
one it's a little better if you got they
make these little hooks and stuff that
you can grab them with and pull them and
push them and
that so it's a little easier to jab
those all right so that one went there
you saw the whole thing went down just a
little bit so now we've we got this one
here which is the
hour it actually seems like it's in
about the right
spot keep wheels off a little bit
yeah and sometimes you can do it where
it
will move a little bit and pop a couple
of them out and screw you all
up like I think we're back to this one
being slightly off
okay it's this
one I know you can't see perfectly but
you get the picture right you guys get
the picture and
girls you men and women get the
picture I can see where this would be
very frustrating to some people though
to me I think it's kind of fun
get that one to move just
slightly oh it's in there that one's in
there
and that one's in there I'm missing
something
here this one is completely out
this is the one that we put the bushing
on
actually but we already know that it
fits because we tested it last time so
that went pretty
good Escape wheel's
in now this is one of the pins with the
spring on it it's
in the other pin with a spring on it
it's not quite ready
yet so this side they're all in right
now this is the strike side
here we're still playing with a little
bit oh we might have popped some out
doing that
this the type of thing where people can
give you advice and it doesn't really
help you got to just get your own
technique figured
out all right I got to pick it up and
play with with a little
bit okay folks so I've got it all back
together I don't have the pins in it yet
so I'm being very very careful cuz this
thing's basically like a spring-loaded
trap but it's literally but um we showed
on this one before if I wind this
up
the time side is working really
good
right this is without any oil or
anything okay now the
the the I got to be really careful
here trying to put a little wind on
it all right so this is the strike side
so as the second hand turn as the minute
hand turns
around there is a little spring
underneath it
this is really hard to see but whenever
you get down to like at half an
hour it's going to turn a spring which
is going to make the this thing move bam
so it would have just made a
noise or actually I think I'm on the
hour
two
three I'm not sure it's working
perfectly
we may have to bend some of
those pieces at the top the
little legs but it's at least uh all of
the wheels are
moving the count wheel is
moving the little Hammer is moving let's
see if it stops when it gets to
that little indention
there no it missed it no it got it no it
missed it
all right so we need we obviously got
some adjustments we need to do but
basically all of the gear works are
running we just need to it's going to
entail bending some of these
um some of these levers and things up
here right but uh I think we're pretty
decent so I'm going to go ahead and put
pins in it to hold it together on the
five things so that we don't have to
worry about it all popping apart and uh
we'll move on from there okay so it was
actually fine what was happening was
since I was letting it just run the the
Escape wheel just run and run the minute
hand was twisting really fast so before
it could chime all of its hours it was
back around to where it needed to do it
again so if I
slowly this hole here is pointed kind of
where the minute hand would be so we're
at about um I don't know if I can grab
this from inside yeah we're at about uh
35 after something like that if I let
this slip a little bit this is much
faster than it would usually run now
we're at like 45 after when we get to an
hour you will see this bar that I'm
right in the middle of the screen there
lift up this bar out of the count
wheel right so it's coming
up you'll see it start
moving or we may be on the half
hour yeah we're on the half hour so at
the half hour it hits
all right so it chimed at the half hour
you just get D at the half hour on this
clock I suppose and that's done with a
different spring down in there this is
all complex I understand I don't
completely understand it either but so
when that hole gets back up to where
it's basically facing up it will do the
hour
strike 40
after 45 after 50 after okay so yeah so
whenever it gets up near you'll see this
bar right in the middle here start
lifting and it will lift that this bar
out of the count
wheel sh lift it and it
is lifted it
out now it's going to keep
striking until it gets to where it can't
where it falls all the way down in
and then it stops it so it's adjusted
properly I was just letting it run uh
fast because I don't have the the um
Verge on
it uh which brings me to we need to mess
with the Verge all right so the Verge on
this one is called a deadbeat Verge see
how both sides are like curved up it's a
little trickier to get these right than
a recoil
Verge
so the way this particular one is made
the the back of this pallet catches the
tooth and then when it swings back the
other way it's going to let the front of
that pallet catch the next
tooth then it's going to swing back in
the back of that pallet on the right is
going to catch the next
tooth and just on and on and on
I marked one of the teeth so I could
watch it as it goes around to make sure
that it's stepping through all of
them but I've been reading online about
these and these are a little
fussy basically that that Verge has to
sit a certain distance into the teeth
and it has to have a certain
angle on these pallets the angle
generally runs through that Center thing
there so the whenever it's
engaged it's kind of hard to see but if
you look that left pallet that is
engaged in the tooth is aimed right at
that Center
pivot if it's off it's real close and I
think it you know it never engages fully
like at it it always goes about like
that because of how far the pendulum is
swinging to the left or the right so as
it has swung bam it's aimed right at
that middle
thing and then when it lets go and goes
back the other
way so it's swung back this
way The Verge on the right side is just
slightly off I mean not the Verge the
pallet on the right side is just
slightly off so it doesn't aim right
through the middle it's just the right
of the middle a little bit there's a
2%
difference and you don't have to adjust
all that it's already kind of made if
you have the The Verge that came with it
so the left one when it's
engaged you can draw a line from the
angle of the pallet and it'll go pretty
much straight through the center of the
Escape
wheel and the right one when it's
engaged the same but it'll miss the
center of the scape wheel just a little
bit
um if you got it too
low what'll happen is it'll skip a
couple teeth and you'll go too fast if
you've got it too high what'll happen is
it'll stop running it'll get caught so
you got to get it just right so how do
you adjust it there is this little
bar that little thing there is a little
pin that The Verge slides down on I call
it the crutch too I think the crutch is
like this part of it and The Verge is
that part of it the pets are the end
where it actually goes into the teeth
but there is a little little post
here that sticks
out that the Verge mounts
on that little post is riveted on but
you can move it with some Force so you
can move it up or down to move the Verge
into or out of the
teeth and um typically you wouldn't have
to mess with it but the one on this one
it was all screwed up and filthy and
just all messed up so I hopefully I've
got it right if not maybe we can tweak
it a little bit um but you won't really
know until you get a weight hanging on
it and then you have to get
it hanging vertically they make a little
um stand you can get to mount a movement
on whenever you're testing it like
this but I don't have a stand or
anything but I did a while back order
some pendulums and I don't know if this
is the right size this thing's actually
pretty
heavy um
but it's an old Ingram
style uh
Bob something's hitting what is hitting
they said these are also very particular
about having them in beat so you got to
get them pretty
level okay so uh we're ready to mount it
back up in the case though and just see
what we've got we'll be able to get to
most of it from the
front uh inside of the case so I'm going
to mount it on here and then go ahead
and mount this back in the case so from
here on out we'll be messing with it
through the face all right so I got to
mounted back in there I was mentioning
before that this on the previous video
this side is split I need to put some
glue in that and clamp it back together
but we'll get to that I think I might go
buy a clamp tomorrow like a at the flea
I'm going to the flea market in the
morning and I'll get me a nice Jorgenson
clamp or something to clamp it back
together with um so I've mounted it in
there and I went ahead and hung the
pendulum down in there now these the
movement is mounted up
here the bottom of it is right about
here
okay and that pendulum leader hangs down
to about
here and then the Bob is hanging on it
down here so they designed these
cabinets so that there was just enough
room for the pendulum to swing back and
forth and on the back there's no bottom
on it so uh you can reach in the bottom
on the back and mess with the pendulum
and there's also this here you may have
seen that on the previous video there's
a little wire that comes down it's
attached to the count wheel the
little um I guess they call that the
lever on the count wheel and so if you
from the
back were to push up on that it would
push the lever out of the count wheel to
make it start chiming now the purpose of
that would be uh so you could set the
hour correctly so if it was on two you
would push up on that it would go ahead
and strike eight or whatever it's on
after it was done you'd do it again and
it would strike nine and you keep doing
that until you got it to the correct
hour um you wouldn't have that problem
if you kept the thing wound but if it if
it uh if you moved it or if it was
Unwound so again this is a dead beat
movement and I am this is amateur repair
time people I don't really know what I'm
talking about but it's a little
different than they are on most of them
it just it sounds a little different and
it has a different um it just it moves a
little different so I think I've got it
about right we'll set it moving and
we'll watch The Escape wheel it's kind
of an interesting thing I I can't tell
if I've got it in beat I think I do
sounds a little bit off but I think it's
just because it's a dead beat
movement so you're trying to get it even
it may be a little bit off I can't
tell you can adjust it by making it more
or less level and you can adjust it by
bending
this uh crutch
here so I think it's coming up
on see the little hole in the in the
um
minute wheel there or the you know the
the post so I think the minute hands up
like here I think it's coming up where
it's going to strike here pretty soon so
we may be able to see it strike but I'll
let you hear and see the the dead beat
movement the dead beat escapement
now the way this particular one is
designed if you were to turn this
wheel you would raise or
lower the plum Bob which would make it
slower or faster and you get to that
wheel through the front of the face here
it's just a little thumb wheel that you
can turn faster or
slower let's see if it'll strike for
us looks like it's going to be
on maybe 10 o00
I've heard of watching paint dry I've
never heard of watching a clock tick
I don't know if this is good YouTube
material or
not I just want it to naturally chime so
we can
see I
think that is pointing about where the
hand would be so we're we got like a
minute or
something want a recoil movement when
this turns it will move back just a
little bit each time it's kind of like a
it swings a little bit it's a little
more
forgiving this one's a dead beat cuz
it's like it doesn't it doesn't recoil
at all
I think it kind of has a soft tone too
because it's got a little piece of felt
on the
hammer and it's not hitting a bell it's
hitting a coil
[Music]
what a thing of beauty 130 years old or
something like that clean it up a little
bit put a bushing in it tick tock
baby all right folks a little bit of
time has went by I ordered a glass bezel
for this I just ordered a flat one when
I got this it actually had the bezel in
the glass in it it was just all
shattered um and it was flat so I
ordered a replacement I think it's the
right
size and the way that it is held in
here is there
is some little solder
dabs that hold this ring
in
um and that's
how they keep the the glass
in in four places there so I'm going to
very carefully desolder that pop that
ring out put the glass in put it back
put a little solder back on it and that
should hold it in
place got it in there got some solder on
it to hold it in
place um I'm going to clean up the dial
I I found four old screws that I was
able to put in remember when I got this
the face was off of it so I don't know
what they original screws were they had
busted up that one a little bit and but
there was a second hole there that
they've added at some point so I'm going
to clean it off a little bit and then
I'm going to try to look online and see
if I can see a picture of maybe what the
shape of the original hands
were um see if I can find anything like
a you know a
blackace uh clock like this on their
cataloges or something and just see what
kind of what the the shape of the hands
was and see if I have anything even
similar
all right folks well I didn't get I
didn't have any hands that were the
right color I think they really they're
supposed to match the
lettering the
numbering um but I didn't have anything
even similar to that so I put some black
ones on there for now and they're
they're not the right design either I
just don't have the correct one
so it's one of those things where you
kind of need to get some vintage ones
you know I couldn't find any that were
the exact right ones but
it's easy enough to swap those and
um it's a small thing you know it's not
as easy to read because the hands are
black and the face is black but whenever
I find the correct ones I'll put them on
there the design of the handles is also
a little off on these uh Ingram ones
they were like a reverse Trident I
couldn't I didn't really find a picture
of this exact model but I there were
several that had a black face that I saw
and they had the little Trident ones um
so I think either gold ones would look
really well or these are actually kind
of like a the the numbering is almost
like a green as you can
see um so they'll pop up eventually I've
been getting in all kinds of parts and
stuff for them maybe I'll find them on a
movement or something that I um don't
need but this will do for now I put a
little silver uh gold um you know the
little Center whatever they call that
little washer that goes there and then I
put a new um pin on it it's a little bit
long but I think it's all
right um I ordered a new key for
it and by the way I didn't order it just
for this I had a bunch of other stuff
ordered so I got an Ingram uh key that's
pretty cool it fits it well um and then
there were a couple different types of
Bobs this is the one that's on
it um the eye for
Ingram and that's probably correct
and this is another Ingram one but I
don't know for sure if it had this kind
or that kind so I just left the one on
it that's on it it seems to be working
good like that so now all that's left is
I need to uh watch it for a while and
adjust
the faster or slower adjustment on the
face of the dial but nice little clock I
actually let it run for about 4 days
with no hands on it and um I put a
little toothpick in it and it seemed I
couldn't tell if it was keeping perfect
time or whatever but it it didn't seem
like it was way off so um I think I'm at
a good starting point to adjust
it uh it's good getting the bezel back
on it oh and I did fix this it's still
split just a little bit I clamped it as
best as I could and I glued
it and um that got it back up where it's
level now too if you listen it's in beat
tick tck tick tock tick tock tick
tock so I'm going to call this done uh
until I find better hands but what a
cool little clock I really like it and
um I just think it really looks
nice very classy looking almost Gothic
looking with the black face and the just
the the design of the cabinet this was
one of the ones that I really liked
whenever I bought that bunch of them
from that gentlemen um I really thought
this was something special so I'm glad I
was able to save it and get it up and
running and doing its thing so there you
go I hope you enjoyed it I will be doing
more clocks i' I've been doing a bunch
of them actually while I was waiting for
parts for this I was working on some
other ones but um I'll put those videos
up eventually I'm trying not to do too
many clocks in a row because they don't
do as well um people prefer the radio
videos and the record player videos are
the ones that are the most successful on
this channel but
I like doing clocks too that's why it's
called amateur repair
time so there it is I hope you enjoyed
it now if you did like me watch working
on this clock and you watch this far in
you probably uh you're probably in the
clocks so we can take a a trip back in
time and I can show you another one that
I worked on just a little while back
check this video out I'll see you on the
next one hope you enjoyed it
