This Telechron Cathedral Clock Was Given As A Present 100 Years Ago!

Amateur Repair Time
257 followers
2 Video Views·Jan 7, 2025
ladies and gentlemen this is Joe's
classic video games back with another
cool clock repair video for you this
evening now normally on our Channel
Joe's classic video games we do our we
do uh videos on Arcade repair pinball
machine repair and jukebox machine
repair this will not be one of those
videos this is going to be a clock
repair video so if you're only
interested in arcade game pinball
machine or jukebox repair we'll see you
back Tuesday uh when we'll have one of
those however on the weekend I have
lately for the past year or
so been doing uh repair videos on other
things I call amateur repair time so
some of my other interest
clocks radios record players stuff like
that so it's been pretty
fun now I want to mention here at the
front too that when when we started
doing this we Our intention eventually
was to spin that off into another
channel so I've actually created another
channel uh we're going to continue
uploading these on this channel as well
but for for the foreseeable future but
eventually they're all going to be on
our other channel so I have another
Channel that's actually called amateur
repair time and there's a link to it uh
on our Channel we're subscribed to it or
you can just type amateur repair time in
U YouTube and it'll pull up and you
subscribe to us over there right now
most of the older videos that we've
already done on this on U uh this older
electronics are on that you can go check
it out but uh if you're one of our
subscribers to our normal channel uh
we'll keep uploading them on here too
like I said for the foreseeable future
but I don't know how long maybe another
year or so we might upload it to both or
maybe not depends on how it goes there
is
a there the way the algorithm works on
YouTube is a very complex thing but
here's here's kind of what goes on with
that it's hard to understand but I'll
I'll try to be real short if I update if
I upload videos on pinball
repair when a new video comes out the
subscribers that are interested in
pinball repair will probably watch it or
watch part of it or
whatever the people that are subscribed
to us that only care about arcade games
when they say when they see a pinball
video they go oh I don't want to watch
that which is fine I don't really blame
anybody I don't watch videos I don't
want to watch
either but what that screws us up a
little bit
because uh YouTube sees that as oh well
we showed half of these people this
video and they didn't even want to watch
it so that must not be a very good video
so they kind of kill the reach of the
video they don't spread it around
YouTube as
much and um you'll notice on on channels
that you subscribe to if you don't watch
one of their videos for a few weeks they
kind of stop suggesting their videos to
you so the algorithm is very intelligent
to an extent so whenever we do multiple
videos on one channel of all kinds of
different things it kind of messes you
up a little bit so for instance if
someone likes watching Old Clock
videos and they have no interest at all
in watching pinball repair videos
there's a lot of crossover but there's a
lot of people that like one or the other
right when I upload a pinball repair
video they're not going to watch it
which kind of screws up the algorithm
and whenever I upload a clock video you
know a lot of the arcade game of pinball
people they're not really interested in
that so they're not going to watch it so
it kind of messes you up however if you
make a channel that's got just clock
repair videos on it for instance if the
content's
good uh whenever it suggests your latest
clock repair video to your clock repair
people YouTube will go h it's pretty
good look this many people are watching
it and they'll promote it to more people
and blah blah blah blah blah right so
whenever you do a channel and it's got
all kinds of different types of videos
it doesn't really YouTube doesn't like
that right So eventually we're going to
take all of these and put them on the
other channel
um and um that's just kind of how that
goes so with all that said I've got a
really cool clock we're going to work on
today I love this
thing I bought this a while back and
I've been wanting to work on it I'm
going to show you what's there's several
things interesting about it but I'm
going to show you what's neat about it
here in just a second this
is
a
telecon now there is a red dot there in
the middle I have no idea what that
means I guess we'll find
out um it's a nice looking little clock
this
case
is like b aite or something it's plastic
but like a really cool plastic now what
what uh age would you say this clock
is give it a good
guess it's been a while since I looked
at it but just guessing I think I know
how old it is but um just guessing
looking at it again I'm going to
guess and I'm cheating a little bit I'm
G to guess
1930
1932 something like that and the reason
that I think that is because it doesn't
have any way to wind it on the front and
it says
telecon which is making me think it's
electric and of course I know it's
electric asz I looked down earlier and
the electric ones didn't come out until
the late 20s I don't
think says Warren telecon
Company
Ashlin
Massachusetts and it has a second hand I
think or is that an alarm that might be
an alarm hand actually we'll see here
shortly but let me show you what's so
cool about this again it's
bite
right if it'll focus
it says let's zoom in I'm going to zoom
in which helps the focus
okay presented
by what in the
world we got to get it just right so we
can read
it
I can read it with my eyes I just can't
read it with the looking through the
phone I've been working on my car again
people I got grease all over me don't
worry about
it
Highland Hose
Company you see
it presented by Highland Hose
Company to H
a
Eddie April 1st that would be April
Fool's Day if you're not aware
1930 so if you don't know about
these
um a clock was considered a a good uh
retirement gift or sometimes if you
worked at a place for 25 years they
would give you a a clock or something
because it represents time and you've
spent a lot of time with the company
used they used to do all kinds of cool
stuff like that in some
companies right so the Highland Hose
Company in
1930 gave this
clock to Mr
Eddie
1930 but here's the
deal
the cord is cut off the
clock now I haven't messed with it I
have never really messed around with one
of these I don't know anything about it
but I'm kind of thinking we oil it and
put another cord on it and see if we can
get it to
work so let's check out the um
the label
here telecon
motor number
84728 a model
M type
B2 voltage 100 or
125 I don't know what the c means and it
says
60 and then W2 maybe licensed only for
use for which originally sold now I
wonder why they say
that they don't want you making a bomb
with it or
something look it's got a patent of
October 29th
1918 I didn't know they had the electric
ones out that early but
maybe Warren telecon Company Ashlin
Massachusetts
USA how cool is that look at that what a
cool cool clock if we could ever get it
to
work so I'm
hoping that the the cord was just
deteriorated and so so they removed the
cord
um you know just because it was all
shorted out or something and that
there's nothing wrong with the motor
usually these motors are fine I've
heard I don't know about on the specific
model or the specific type of motor but
usually these electric clock Motors will
hold
up so I think you know what we got to do
first we got to take this screw
out and that screw out and that screw
out so let me get a screwdriver and I'll
see if I can take that back door
off now a lot of people don't like
having things with somebody else's name
on it but personally I think it's pretty
cool I mean this is an antique
clock so somebody else owned it already
anyway and it's it's Tastefully done
it's on a little plaque and it's on the
back right that's cool why would you not
want
that the alternative would be one
without that plate on it I mean
I think it makes it nicer that it's got
the plate I'd much rather have one with
a plate on it that with somebody's name
or something and if you didn't see on
our Channel go back and check it out
that clock there is also a a um a w
clock um we did a whole video on it and
kind of it's like 50 minutes long we
kind of looked into uh look how dusty
this is we looked into uh who we even
found out who the guy was that got the
clock so go check that out if you
haven't
already Okay so
this I don't want to just take things
apart you know I
mean it looks like though I don't know
do we need to take the whole movement
out I guess that would be easier
than now look there's one screw missing
already people I didn't do
that all
right maybe if we take the whole
movement out to where we can set it down
without worrying about damaging the case
we can see on the other side how the
cord is installed it kind of almost
feels like it just pulls
out it's
moving
um see yeah I think I'm going to take
those three screws out and I think the
whole thing will come out if I do
that look it's the red is
moving that must mean
something maybe it means maybe that has
something to do with the
alarm or something or maybe it means
Daytime Nighttime I don't
know um okay so I'm going yeah I'm going
to take that screw that screw and that
screw and one is missing and see if the
whole assembly will come out where we
can get a little bit better look at it
Mr Eddie we're trying to fix your clock
buddy okay so it came right out the dial
is loose
however there is a little indention
here that fits right there to hold it in
place so no big deal it's apparently
designed that way it looks like there's
one here and one here as well but that's
really loose but I think that's how it's
designed also of course the the uh glass
just comes right out all right
so there is just a
motor with some kind of gearbox I
suppose I think all we can do really is
just put a cord on
it
um I don't know how you would oil it if
I mean it's possible that you could take
that plate off and that there's an
oil no you can't look it's
solid
H the whole back would come off
though yeah the whole back would come
off if this set wheel comes
off I'm just trying to you know figure
out if we can oil this or if we just
need to put power to
it but it looks
like the the cloth covered wiring here
is fine there's nothing wrong with that
and it looks like this kind of just
plugs in and maybe that screw is how
that piece fits on the end of the
cord so I'm going to try to just pull
that
out um and then we'll see what we can do
with that yeah it just came right out I
just didn't want to force it
earlier
um
to me it looks a little wider than the
more
modern uh cords I mean the the more
modern
um you know just pre-made chords so I
think I think we'll just take this screw
loose oh does that say GE I think it
does that's the GE
logo we'll just take this screw loose
and then we'll put a
new
cord in it and run from there now is it
going to be a big sin if I use a more
modern plastic cord instead of this
uh double looped original style I think
we'll be fine with the plastic
one I don't want
to step on any Toes or nothing but you
know if I had some of that in right now
I do have some in I'm I'm still working
on this Majestic radio and the cord for
it is that double braided Style
um but I need it for the Majestic radio
I'm not going to sabotage it so I
can have this right so I think I'll just
put a plastic one on it if it'll fit in
there uh good I think it will and then
we'll uh we'll give her a
shot so this is what's inside of
it these are still in perfect
shape well maybe not look at that the
side of that is deteriorated a little
bit but pretty good
shape this is the other side of it but
we kind of need it because that's what
fits in that hole perfectly there was a
little bit
of trash in
there
which I couldn't tell what it was but I
think it it's
either part of the covering of the
wires or it's the side wall of that
right there which is where the screw is
by the way and there's a little nut
too and then
these just sit in here up
here and so when you push it on the
clock if I can find the clock without
making everybody dizzy when you push it
on the clock it just it's touching the
side of those pins
there and that in there looks real clean
like everything's
fine yeah that's
stock that's
Gnostic okay so uh let me see if I can
get
these it's got a little ringlet it looks
like or maybe not maybe they just got it
wrapped around let me take that loose
and see how they attach that all right
so we're putting the new cable in this
is kind of how it has to
go that's how they had it in there
originally now see how the little lead
is tinned and then it's just screwed
down that's how they had it as well this
cord is slightly bigger it's a slightly
bigger gauge than what they had in there
but but it loops around the center hole
to that side and then this one loops
around the center hole to this side
which makes sense cuz that would make it
a strain
relief and then it sticks up higher than
the one side but the other side has the
same relief on it so it's a pretty cool
design actually
um you might want to put solder on that
just to make sure that it doesn't come
loose but you know it's going to be
inside this plug there's not really a
lot of stress in there
but you know we're to the point people
where this thing is not going to be uh
very utilitarian it's going to be a
shelf queen that works you know out of
respect to it that's what's going to
happen so this is going to be just fine
for that and again the screw through the
middle is going to make it where the
everything stays put so that's how we're
going to do it and I'm going to see if I
can get her together and then uh we'll
see how that
looks okay so I got it back
together it doesn't hold I mean it's on
there
but the cable's a little bit thicker
than the one that was in there I think
it's fine though it's holding together
real
good um
and I've so without anything plugged in
I'm just testing the
two
uh legs of the cord just to make sure
they're not shorted together or anything
inside that plug because we don't really
know what happened when we put the screw
in but it seems like everything's
cool and let's see what we
got the screw was up where you could see
it
perfect all right so uh
H we got the about oiling it let me see
what I can figure out with the back of
it here well I'm looking all over it and
the thing's completely sealed up so I
don't see any hole for oil or
anything another thing that red and that
red thing on the front that we were
looking at it's
this and I don't know what that is it's
almost like there's a little weight
there or something I wonder if
the if that's going to be magnetized to
make it spin or something I don't know
what the hell is that seems like
something might be
missing well we'll see so I guess we
need to plug it up and just see if
anything happens oh you know what I'm
going to do since it's all since it's
got the cord on it now let's test the
continuity
again we'll see if it seems like the
uh motor is shorted or something the
windings
so I've got a circuit breaker here on
this here on this plug we may need
it it did not test that the lines are
shorted so I don't know if anything's
going to happen if we may get it an it
may be
explosive uh so I'll plug it in over
here and you watch over there tell me if
a fire
starts
I heard
something do I have the fire
extinguisher
handy why
hello hello Mr clock that's been asleep
for probably 50 60
years good to have you back
wow that is cool all it needed was a
plug and you didn't even have to take
the clock apart you could have just
pulled it out of the back pulled the
plug out put a new cord on it and away
we
go I don't know what the red thing is
though maybe I ought to try to look that
up I wonder if something's missing or
something I don't
know
okay so I'm going to carefully put it
back in the U in the
case and then I'm going to do the Google
Fu and see if I can find any information
about what this thing is supposed to be
like now I know what some of you are
saying well Ron you should have done
that first
look what fun is that you got to learn
by tinkering with it and then you go
look and see what you screwed up come on
you don't learn if you just go read but
I shouldn't say that then people stop
just imagine that you're here with me
and we're tinkering with it so keep
watching the videos all right okay so
I'm going I'm going to go research it a
little bit all right I'm on a website
called
ton. and apparently this company the
Warren
telecon company made a ton of these
things and so the one that we've got is
the model
355 the cathedral so I'm going to read
what they say it says made of the famous
famous balite in a rich Walnut color is
5 1/2 in wide 7 and 1/4 in high and 3
and 1/2 in deep the 3-in dial is
finished in silver the cathedral model
withstands changes in temperature and
moisture retains its high luster will
not scratch easily and requires no
polishing the 355 was telecon first star
someone got the bright idea of making a
clock people could actually afford and
it took off
this was the most imitated telecon Ever
every electric Clock Company who was
anybody had a cathedral design the early
ones had the bronze back a card
grommet and Brass lugs for the rear
screws fitted to the
case see the early ones had the bronze
back Ys would uh yeah so he's saying
like that ours isn't like that a cord
grommet ours doesn't have a grommet it
plugs in and Brass lugs for the the rear
screws fitted to the case see below
probably four and five
Cathedrals came with the famously
ill-fitting balite back that screwed
right into the plastic case and
removable plug later models had a
painted Ivory dial but a proper closed
rear that showed the model number and
then they're going to show us some cool
pictures
here
similar to ours ours is a little
different ours is like the one at the
top it says accurate electric time from
the power station with telecon
springless electric
clocks no winding oiling or
regulating so they were $10 it's also uh
the choice of all time it's also telling
me what the Red Dot is for has anybody
figured out what the Red Dot is for
it is a good looking
clock the early Cathedral sported BL
brass lugs right in the case to mount
the movement and movement cover ours
does not then someone asked what are we
nuts and they just tapped right into the
bite light from then on that's how ours
is
okay so you know we can be reasonably
sure that ours was a model made in 1930
I was thinking that it seemed weird that
it had patent dates all the way back to
1918 or whatever it's because they sold
the crap out of them so apparently it
was a really good uh
seller and you know 12 years later they
were still making them whenever that
company bought that for that award clock
for Mr
Eddie so very cool okay so let me show
you what the Red Dot apparently is
for okay it seems to be keeping good
time I'm not so sure that these can get
off time because they're running off of
the frequency of the
uh the the wall
voltage okay so when you press this
little thing in in the
back you can actually turn it
right so when I press it in something
grabs it it almost feels like it's
meshing with some gears or something
right so see I have it white right
now if I unplug the
power it didn't
work oh maybe when I plug it back
in
hm well that was a lie so supposedly
that will flip to
Red if the power goes out and the reason
that would be important is
because uh maybe it's supposed to be red
and it flips to White I don't know uh
the reason that would be important is so
you could tell you know you wake up in
the morning and if the power had went
out in the middle of the night you would
know wait a minute the clock's probably
not
right I think this was something that
people really worried about back in the
day you know if you've got a pendulum
clock it's going to tick whether the
power goes out or
not and so they probably had people when
it first came out that said I'm not
going to use one of those things if the
power goes out the clock won't go off
okay so now we've got it set on
red so I'm going to unplug it and see if
it turns to
White if I can do it with one hand
without electric killing
myself no maybe when I plug it back
in no so that part isn't working
right okay so I've got it back
now on
white I think it may be
misadjusted
I may have to do some
uh I may have to do some investigation
on how you fix
it
h supposedly you have it on white if the
power goes out it'll flip to Red it may
be that it just takes it longer than
it's than I'm giving it um so maybe I
leave it on
white let's unplug
it and I'll go away for 20 30 minutes
and see if I come back if it is flipped
to Red on it
own well it's been 20 minutes and it
didn't reset I think it's probably
supposed to do it
immediately maybe it's
[Music]
stuck
and it said that when you move the
hands it will turn it white again okay
so we've got it red right now let me
plug it back
in they said when you plug it back in
and move the hands it'll turn it back to
the same color as the
dial okay so our time's off I got to set
it
that didn't move
it maybe like
that
no well something's going on with the
red part but I think I can do without
that I don't have to have
that it feels like it catches in there
or something I don't
know
you saw it in there there's some kind of
little weight or
something I can feel it kind of grabbing
it whenever you do
that
all right
so that's the only thing left but I
think I can live with that I'm going to
have it unplugged so I'm going to leave
it red anyway boy it looks cool doesn't
it I have never heard of these and
apparently they made tons of
them so everybody go to eBay and get you
one on uh we did a BRI a video Back In
December where one of our viewers gave
us this Jefferson golden hour clock that
we fixed
um so now that you know about these
telecons go check them out they're not
that expensive they're cheaper than the
Jefferson golden
hour all right folks so there you go
hope you enjoyed it leave your comments
Down Below have you ever heard of these
I've never heard of them but now I
know and uh hey you know how you can
help our
Channel there's a link down below all of
our videos to Amazon if you're going to
buy anything on Amazon use our link to
buy it and it doesn't cost you anymore
you don't don't have to sign up for
anything just click the link and it
gives us a tip because we sent you to
Amazon so we appreciate everybody that's
been doing that and don't forget last
but not least to check out my brother
Donnie my brother has his own channel
here on YouTube as well we work on
arcade games pinball machines and
jukeboxes on this channel I've been
working on my truck today that's why
I've got grease all over me
um uh and then on the weekends we work
on clocks radios and record players and
old fans
um but Donnie works on Old Vehicles old
buildings and he has a farm so go check
out his channel I'm over there with him
on the channel usually but we will see
you back here in two days with another
video I
believe we're doing an arcade video
Tuesday so I'll see you then I hope you
enjoyed it this is a beautiful Warren
telecon Company Cathedral clock I love
it
