I Made an 1850s Drawn Bonnet

Victorian Threads
4 followers
2 Video Views·Jan 8, 2025
No historical project is complete without the proper accessories. For the 1850s fashion plate project I'm currently working on, I knew I needed to make a bonnet to match. This is a drawn bonnet (meaning the fabric is shirred) with a buckram base, and I used Butterick 4210 for the pattern.
Hello everyone! I'm Rebecca and welcome back to my sewing room. Today we are going to be making an
1850s bonnet to go along with the 1850s purple plaid silk project that I've been working on
that is hiding behind me right now. It's actually finished but you're not going to see that video
until Tuesday so do make sure that you are subscribed and you click the little bell icon
so that you can be notified when that video goes live and I'm going to try not to spoil it
in this video by having it, you know, behind me. So the bonnet that I'm going to be making
comes from Butterick 4210. It is this one right here. It works pretty well as the 1850s shaped
bonnet that I need for this fashion plate right here. The one difference is that I do feel like
this one gets a little pointy right down here. Let me show you what I mean because I've actually made
this bonnet twice before. Once before I knew anything about making hats and that wound up
turning into this bonnet made out of like single layer Joann's type buckram that just crushed
itself basically and so you have actually seen me wear this with a lot of other outfits like my
velvet early bustle gown because I went and I took this bonnet and I turned it basically into like a
hat that can sit on my head like this. A little more bustle appropriate because it got so crushed
but then I remade it a couple of years later once I knew a little bit more about hats with like
good two layers of sturdy type buckram and that was this one right here which went with my blue
and white 1860s sheer dress. Now I love this bonnet. I still am super proud of this. I think
it's gorgeous but it is obviously not going to match the purple project so that's why we need
to make another one of these in purple with obviously different trimming and everything too
to make it kind of match this fashion plate. Now we don't see very much of the bonnet in the fashion
plate. There's a little close-up right here so obviously we're just getting a little bit of the
rim around but this is what I meant by the like pointy part in the front so I move my hair out of
the way you can kind of see right here where it just gets pointy and like long and so I think I
want to get rid of that and just have it come more in to make this a little bit more appropriate so
I am going to be altering this pattern just slightly and hopefully it won't be difficult
or a big deal to do that alteration. The other question really is what I'm going to be making
this out of because I want to make this out of the purple trim fabric that I've used for like
all of the bows but um this is all I have left that's it just this this little piece right here
so I definitely cannot make a drawn bonnet with this which is what I have on here when you see
like all of this kind of ruched shirred fabric this is a drawn bonnet and I love love love the
look of that but that takes way more fabric than I have especially since it's like also gathered
around the brim here not just the crown so we're gonna have to kind of experiment with the pattern
layout and see can I make it out of this at all do I need to run to joann's if I need to run to
joann's do they have more of this fabric etc now I do have enough of the plaid silk that I could
potentially just make the bonnet out of the plaid silk but it's kind of like a you know larger plaid
print here and so I just feel like putting it on something as small scale as the bonnet
is it's going to be like too much it's going to overwhelm the bonnet and it's going to be
incredibly matchy matchy to the point where it would be difficult to wear this with you know
potentially another outfit down the line I do like to make headwear that is versatile that can be
worn with multiple outfits so that is why I would much prefer to make it out of like a solid like
this than this plaid so yeah let's go ahead pull out the pattern pieces and talk about how I'm going
to be making that alteration to the pattern piece and see if it fits on my purple fabric or if I
will be running to joann's so although the shapes in this pattern do a pretty decent job of achieving
the like right bonnet shapes this pattern honestly makes no sense at all so we are just completely
getting rid of the instructions there the other thing that we're going to get rid of is the fact
that for some reason there are two very very different shaped rims for this pattern and it
makes no sense you don't need that so yeah we're getting rid of this weird narrow one I don't know
why it exists but it goes with the weird instructions and we're just going to use the
pattern piece nine for the brim now I had written some notes on here last time like minus 0.5 piece
8 which piece 8 is the piece we just got rid of and I'm not sure why I wrote them I can't figure
out why so we're actually just going to go with this shape except that I've drawn in over here
my new point or kind of lack of point so I'm actually curving in this edge right here and
then I'm shortening it as well and so that should make it so the bottom of the bonnet is not as
pointy and it will leave the rest as is so this gets cut out in the buckram this well actually
it's technically this one gets cut out in the buckram and then there's the top for the crown
somewhere that gets cut out in the buckram as well for my buckram I always do two layer buckram
and I zigzag the edges together I'll show you that once it's done and you press it together
and that makes it more stiff not all buckram will fuse but if you find this stuff that can
you can literally use it for cutting too so that you can fuse the one piece you've already cut
on top of the piece that you're about to cut making it a lot easier to cut of course always
make sure that you cut buckram with craft scissors and not with fabric scissors once you've done a
basic fusing on something that's going to be rounded like the brim of the hat or the crown
you can also fuse it on a curve to build a little curve into it that way you won't get bubbles when
you actually go to put it together so now what I've done is I've added stitch lines around all
of this hopefully you can see but there is a little stitch line towards the edge and then
there's also just like a zigzag of stitch lines that I've done throughout the middle to really
keep this together because the fuse is not like a permanent type thing and then over here I've also
added the millinery wire to the edges so on this brim piece it goes right along the edges down
here at the end and all the way around the outside and then it just goes in a little bit on this one
right here the reason that this is done is just so you don't get like a pointy bit right here it
just kind of comes in a little bit you probably don't even need that much and then I also have
done it to the top here I'm a little worried that I set it a little too far out because I
meant to set it five-eighths of an inch from the edge I set it half an inch so hopefully this will
fit because this is now going to get crenellated well really when we put it together we're going
to put it together with fabric and stuff too but basically the edges are going to get little
slashes cut in them and then it's going to like fold over the wire like that and then the crown
piece will wind up going around it and it will go into the back of the crown piece right there so
that is what we'll do next as we put this all together so although I did actually go to joann's
today to get more of the purple fabric back there when I got home I got it into my head that like
wouldn't it be cool if the bonnet was velvet because this still perfectly matches the dress
and it's such a weird kind of like I think it's one plus yard of velvet it's like hmm that might
be really nice as like a drawn bonnet so I've just kind of done a test here to play with the
drawing portion so basically I first I ripped this on the grain so this edge is totally on the grain
just flat and then I did two rows of gathers there skipped four inches and did another two rows of
gathers here and I think I like it I should have marked the center but I didn't so I might just
have to kind of eyeball unless I want to completely undo the gathering by the way the
gathers did some weird tension things on here which I think is just a matter of it being velvet
now that I've pulled it up it looks less weird but it was so loose of tension it was like I'm fine
on my machine um so yeah that was a little bit weird but I do kind of feel like I like that this
is this would be the outer portion of the brim and then the inner portion would be something else
just filled with lace and then this will also be the crown or will be eventually but I'm just doing
a test right now but yeah I just I like this plush I feel like that would look really pretty in a
bonnet so I think it looks pretty nice this pulled up section here this is the full width of the
fabric all the way around obviously it winds up being less gathered on the outer edge of the brim
than it does on the inner edge of the brim but yeah I think that is pretty so I think what I'm
gonna do is probably just like hot glue the edges in place and then cut off the excess over here
if I had known that this would have worked like full stop I probably would have just
ripped the grain again up here but since I didn't uh yeah I'm probably gonna hot glue this side here
and then like anchor this edge down and then just pull it taut to hot glue and cut off the excess as
I go so as you can see I have glued all of the shirred layer of the brim onto the buckram now on
that side the other side will be lining when I go to put it together and now what I've done is I've
run gathering stitches here for about six and a half inches wide on the crown this will be the
crown piece and again like I haven't cut it off from the rest of the fabric yet I will do that
after I glue it on so I'm going to pull all of these up now and then these will get attached
to the crown piece underneath here with the crown piece you wind up needing half inch extra on each
side to go around the sides so that you don't get you know weird edges showing like this so
this piece does have to be a little bit larger than this so this is how I am gluing everything
in place I have my brain squiggle fabric here all pulled up and then on the inside I'm just
folding over a little bit first I'd marked the centers and I glued a spot in the centers here
on the outside and then on the inside I'm just folding over about a half an inch and just like
pressing it into place in the glue I'm going to do that all the way around here then I think for
this top part I'm going to have to like figure out where to cut off the excess so that I can
fold it over because I feel like cutting it off after might be a little bit complicated just with
all this extra fabric on there so yeah everything is going on like that I'm trying not to put glue
like here because you can actually like it makes it a little shiny it hides pretty well in all of
these folds but I don't really want glue on this side here the exterior side just in case it winds
up making any shiny spots so that's what I'm doing here I'm a little worried that this is quite thick
because it is gathered velvet but hopefully it will work out okay so this portion of the crown
is now done it's all wrapped but as I kind of expected it is now too small around here for
this I think it's a combination of a the wire really is a little bit wider than it should have
been like wider out on the circle and b this is now super super thick around this outside so
I am going to have to adjust the wire here honestly I don't know 100% that I need the wire
so it's possible that I could always just take it out because it's pretty like hefty I think even as
is but yeah with the wire it's definitely not going to work I have to cut this circle smaller
this is much better so I actually went and I undid part of the ring and then I stitched
some stitches on by hand they're purple I can't even see them there they are there's
hand stitches and just kind of whipping them and grabbing just the buckram and now I have fit that
in now I'm going to glue around the inside and I'm going to do a little hand stitches
around the outside to secure the back of the crown onto the bonnet so I've just gone and glued on
the brim to the rest of the crown unfortunately it had a glue accident and it like slid glue all
over right here while I was putting it together which is really annoying I wasn't planning on
adding any sort of like band to this like for example on my blue bonnet I have this trim band
which I mean it's cute but because of the velvet because it looks so nice I wasn't planning on doing
that so what this glue accident means is either I have to add a band which really is more on like
the brim than on the crown because that's where the glue is it's on the brim or I have to add
some sort of like decoration floral lace something you know maybe fake flowers I don't know yeah I
have to figure something out for putting there and other than that now it is time to do the lining
and then the binding of this outer edge right here and that will be it I did sew this by the way
I don't think you can really see any of the hand stitches but it is hand sewn all the way around
there so this is what it looks like from the inside currently and the side I do really really
like the shirt look of it I think it's very nice and just the velvet in general looks really great
so yeah maybe I suppose I could add just like a little band of the fringe trim the dark purple
fringe trim that might look pretty and might tie it in with the dress so we'll see what that looks
like all of the lining pieces are now at least partially in this bottom one like the top of the
that is glued in and then I glue around this edge right here but then here I'm going to hand sew this
there's glue around this edge as well but yeah this connection is hand sewn just because I feel
like you can't really glue this neatly without getting glue all over everything and then I've
decided to do this velvet ribbon for the binding so it's a really nice match to like the deeper
plum color here and I had like a full spool of it so it can also hang down and yeah I'm going to
sew this on by hand both sides and then I also really like these sort of plum flowers that I
have I feel like they're both like autumnal but also still florally whatever I do want to find
some other sort of trimming maybe like down here and the inside of this is going to have lace which
the lace is going to be glued on but I still prefer to do this bit by hand so yeah I've got
to do a lot of hand sewing and then I will get back to doing the decorating all of the hand
stitching is now done you can see how nice everything looks and I've also sewn on the
flowers here I kind of glued them to each other and then sewed them on so you can see like I wrapped
them down here but they're just sewn on with some thread so now it is time to put the lace on over
here and decide if it wants any additional trimming the bonnet is very nearly done I have added kind
of like one and a half rows of lace so there is the full row of lace around and then there's a
second one that just goes right here right behind my head because there was a little too much brim
to fill out for the one piece of lace and that is really the only trimming that I've done besides
the flower and the contrast binding now that said there is one more step that I need to make on this
which I was kind of hoping that I could forego because I don't like the idea of having to hem
like a narrow hem on velvet and I tried to make it you know potentially out of a different fabric
but basically every bonnet from this era as far as I can tell has a little piece of fabric that
is just like a little ruffle right here and it kind of hides the back of the neck so like when
the bonnet is on it would be right back here kind of hiding the hair I guess too and I it's called
the skirt in this pattern and yeah I was really hoping to avoid doing it I mean it looks very
pretty on this one right here this is a little skirt right here so this one I pleated it in the
pattern it says to gather it and again it's very pretty but I just didn't want to work more with
the velvet and I'm going to have to so I am going to cut that out tomorrow but once I sew that on
which that I'm certainly going to well I'm going to try gluing it but it's probably going to be
sewn on by hand and that will be it for this bonnet and I'll show you what the finished look
looks like so this is the skirt piece right here this is the inside of it and down here at the
bottom I've turned a narrow hem and sewn that by hand up here at the top I turned slightly wider
but I've only turned it once whereas this is turned twice and then I just ran gathering stitches over
the top you can see though what I mean by that weird tension issue of what the gathering stitches
are doing on the velvet it seems like once I pull the stitches up that issue goes away so
hopefully that will be the same here so now I'm going to pull these up and figure out how to
attach this to the bonnet and here it is with the skirt attached to the back of the bonnet I wound
up sewing it on by hand so you do see a few stitches like on the inside in here but not a
big deal and I think it looks very very pretty in the velvet so I keep going back and forth on
whether this bonnet is actually done because if you look at the fashion plate here you will notice
that there are some differences between what I have and the fashion plate for one thing I'm really
glad that I shortened the points even just a little bit because clearly this should have been shortened
even more like it's still practically hitting my shoulders I don't have the hair actually done
which will fill it out a little bit kind of lifted up to here but yeah it's still very pointy so if
you make this pattern be sure to shorten the points at least a little bit because it's kind
ridiculous also she has decoration like right here I can't tell what kind of decoration that
is whether that is maybe flowers or feathers or something ruffly that sticks out down here
and maybe here it's hard to tell and then also the ribbon is kind of the biggest thing hers has
really really wide ribbon that ties in a bow underneath the neck and I don't find that flattering
like whenever I have ties on a bonnet I never tie them you will have seen that like with the
kitten ear bonnet that I made for the natural form bustle several months ago I just never like
tying those bows because I feel like it really cuts off my face and like chokes me and you know
all of that sort of stuff so I keep going back and forth on whether or not I want to add bows like
that instead of this narrow velvet ribbon here because I mean I could make it out of the purple
fabric that I got at Joann's this is all that I've left of the original purple fabric so that's
the thing like I could return the stuff that I bought a couple days ago and get my seven bucks
back or I could attempt to make bows out of it because I do not have wide ribbon in this color
and I don't remember seeing anything at Joann's that was ribbon in this color which is why I
made it out of this in the first place so yeah I'm not sure and then the other part is that she does
have a little bit of like the blue color here right around her head I thought about adding in
maybe some of like the fringe trim up there but it just I don't love the look of it so I'm kind
of thinking to leave it as is up there and it's really just the bows that I'm going back and
forth on on whether or not to add stuff there I used to have these little like purple feathery
bits I don't think I have any more of them but if I find the purple feathery bits I might add that
right here as a little sprig to kind of like counterbalance the flowers on this side I might
do that so we'll see if I decide to add anything else to this bonnet so I have added in purple up
here and I really hated it just looks like weird hairs so that's gonna get taken out I have also
pinned on some of the same flowers from over here on this side which is where it looks like in the
fashion plate I don't know that I love it so I think I might put this on an Instagram poll
the thing is the results of the poll won't come in in time for this video so you won't see in this
video if I chose to add these flowers or not you'll have to wait for the final reveal video
that will be on Tuesday so make sure you come back for that and then I'm still waffling on the ribbon
I am definitely leaning towards yes do the ribbon but if I do the ribbon I have this piece that is
actually from the centers of the bows on the bodice and you'll see like with the hems on each
side it just looks really bad and then I would see like the underside and that's not going to
work so that would mean that I would need to do like total tube type ribbons and I feel like since
this is polyester it is not going to look nice to do that and of course I won't know until after I
cut into that fabric that I then can't return um if I'm gonna do it but like these bows are just
kind of a little sad looking um I suppose I would then though have two cuts of the purple
velvet ribbon which would kind of suck I don't know like I wouldn't have continuous because I
already used it obviously for the binding so that would be kind of annoying so I don't know if I
should just keep with these or if I should try to do the wide bows I like the look of the wide bows
but I just feel like I'm not going to have achieved it right without it being actual ribbon
having it made out of polyester matte satin I don't know that that's gonna work so I decided
I would do a quick test piece with the fabric that I had from before like not the new purchase piece
and just see what it would look like you know pressed into a tube so this is that it's not as
wide as it should be by I think like about half an inch or something like that but it is pretty
close it didn't press extremely flat but I think it's good enough that I do want to use it as like
the ribbon so yeah I'm gonna go ahead cut into the new fabric and make some ribbons out of the
new fabric all right the ribbons have been added so now I can tie this in a wonderfully unflattering
bow under my chin I have actually also decided not to do these flowers right here so I'm just
going with the flowers up here and no other decoration on the bonnet so it looks like this
and I am very happy with how it turned out and I can't wait to show you guys the full finished
outfit that is still hiding behind me and hopefully I have not exposed to you within this video so do
make sure that you are subscribed so that you know and when the next video goes live to see
the finishing of the full outfit that is hiding behind me if you like this video though please go
ahead and click the thumbs up icon and like I mentioned if you'd like to see more videos like
this from me please go ahead and click subscribe and a little bell icon to be notified every time
I post a new video I do post videos here on YouTube twice a week with my sewing vlogs out
on Tuesdays and other random costuming content like this out on Saturdays but I post every day
over on my Instagram so please go follow me on Instagram that's at Lady Rebecca Fashions and if
you'd like to help support all of the work that I do on this channel I do have a link to my Patreon
and my Ko-fi down in the description below or you can send me a super thanks right here on
YouTube I'd also like to give a special shout out to my Edwardian level patrons Sharon and Mirage
thank you all so so much for joining me today have a wonderful week
and I will see you very soon in my next video happy sewing
