I Knitted Like the Victorians: A Victorian Cycling Sweater

Victorian Threads
4 followers
28 Video Views·Jul 23, 2025
I recreated a Victorian cycling jumper, staying as close as possible to the original instructions while making necessary adjustments for a proper fit. These small alterations likely reflect what knitters would have done in the past as well.
Materials Used:
- 1 mm set of 5 double-pointed knitting needles
- 2 mm circular knitting needles
- 560 g Merino 4-ply yarn (Yardage: 400m/100g)
Video Chapters:
0:00–0:29 Intro
0:29–3:09 The First Try
3:09–7:53 The Second Try
7:53–11:33 Some Fitting Issues
11:33–15:43 The First Two Parts Are Finished
15:43–17:11 Sewing It Together
17:11–19:09 Adding the Buttons
19:09–20:06 The Reveal
Last year I was looking through some old magazines and I stumbled upon a cycling outfit
and I found it so cool I wanted to make one myself. So I thought I would start with the
cycling sweater and I found some pictures and even an instruction from 1897. So I thought
I will start with that and I even had yarn in a fitting thickness. I started with a fancy pattern
which is made of two stitches and two purls and these are changing every couple of rows.
I knitted all this part here and here you can see I had to reduce some stitches.
That is one side and here is the other side. Usually it should be
more or less like this. So now here I have 40 less stitches than down here and now I'm knitting with
finer needles to give more stability to the waistline.
I started knitting with those two and a half needles here and now for the waist I'm
using two millimeter needles. Afterwards I will go on with the two and a half millimeter needles again.
Basically I was knitting all evenings because I just wanted to get to the point
that I could make the first fitting to see if it really fits to my body.
When I finished the waistline I transferred all the stitches to a needle with a long band
or with a thread so I wouldn't have to fear that the stitches will fall off the needles.
I think I can go on even if I pull it down a little. Here's the waistline so yeah I'm quite happy.
I was on the train and used all the time to knit. I think knitting on a train is amazingly relaxing.
When I arrived I had already knitted quite a bit but I realized that the whole thing
was way too small. It wouldn't fit at the bust line. It was way too much tension and as you
can see here the tension at the bust line is just too big. All the stitches are stretched
out to the sides and it just doesn't look nice. So I took the big decision to
remake the whole thing. But first I procrastinated and used my mom's yarn winder
just because it's much faster than doing it by hand and it was something else to do.
Then finally I persuaded myself to open the whole thing and it was more fun than I thought.
Come back! As you know I have opened the first sweater and that's it how far I'm now.
So I'm back at the waistline and I'm knitting maybe the last row of the waist.
So yeah I had some trouble at first with remaking it all but honestly I'm happy I did.
Because as I said if I don't like the sweater I will wear it. But now I'm pretty
almost certain that it will fit me better. Now I'm actually a bit
scared that it's too big. I don't know. But because when I made the recalculation I realized
I didn't even calculate it wrong or something. I don't know what I did. So I had way way way
too less stitches and I don't know how that comes. And for the waistline this time I have
these super fine needles. Super fine that's one centimeter needles. The funny thing is I wasn't
able to buy some. So these are needles the mother of my friend gave me because she found
them in her stock. And they are probably from 1900. So I'm knitting with authentic needles.
I used hair elastics to stop the stitches from falling off the needles. But sometimes it didn't
work. So it was a really delicate work and I had to concentrate a lot just to avoid that all the
stitches fall off the needles. I thought I would give you a short overview about what I have made
so far and what I've changed in comparison to the first try. And the first thing is I made the fancy
stitch at the edge a little bit different. Now they are more like little blocks. There's more
texture in it. That's the one thing change. And the other is here can you see the side line
where I minored the stitches. And the instruction says you should do that when
there is a stitch and not the purl stitch. And I changed that. I minored with three
or where the purl stitch should be. So you don't see it that much. You only see those two lines
who go straight up and those who end in, yeah, at the side of these lines. That's what I think
I like more. So I did that. And this time you also can see the difference between
the thicker needles here and the finer needles up here. So I'm really glad I had now the opportunity
to knit with those finer needles up here. So the difference is bigger. And yeah, now I have to
knit three rows more, I guess, another shirt. And then I will do another row of the fancy stitch
or another line. There are four rows. And then I will make the fitting and hope that it's better now.
This was a point where I wasn't that enthusiastic about knitting anymore.
But I wanted again to see if it fits. So I went on. I'm a little bit confused.
Because the pattern says I should knit from the waistline, so here, 11 inches and then start with
binding off or almost binding off because I knit a couple of rows for the buttonholes. But still,
if I take 11 inches, that wouldn't fit me. So I'm a little bit confused because also it says
normally it would be knit in two parts and sewn together at the side lines.
So at the sides. So they say I should knit it, sew it together
up to 15 and a half inch. It would be here. So the whole thing would sit somewhere like this.
So now that's approximately how high this side seam would be. But then I don't have the small
knitting at the waistline anymore. So I think what I'm going to do now is to take it like that,
start now only knitting the front part. Then or maybe I start with the back part.
Then I will do the front part and if I hit the gap here, I can sew that close if it's too
big or too deep. But I can't open it again. So I think it's better to start now in two
separate parts and if necessary sew it together here. For the whole project I used six yarn balls.
So at some parts I knitted with two yarn balls in order to avoid a hard transition of the colors.
So right now I have another fitting or I had another fitting and as you can maybe see I'm
almost there. I think I can pull both sides up to where they should meet at the shoulder line.
But if I do it at the back side I pull all the waistline up. So I think I will just knit
at each panel one inch more or maybe one and a half so that I have a little bit of
stretch but not too much. And again I had to wind another ball and this time I hadn't a handy
winding tool so I made up my own winding tool with some chairs. Another trick I learned from
my mom is to always wind around the thumb so that the ball isn't too dense afterwards and
there's not that much tension on the threads. And voila the first two pieces are done and look
how big this sleeve is. It's amazing, it's really wow. I already knitted the whole sleeve
and I didn't film because I mostly knitted at night. But I thought I would show you something
so the front and back piece of the bodice is done with some buttonholes here and at the side here
too. And then I made the sleeve and what's really really funny I think is I thought okay this will
be set in like this but no it isn't. It's like this here is the other part so set in like this
and this part here will be gathered with a box pleat and four other pleats so I'm really
curious how this will work out. And you can slightly see it these two don't have the same
color because I underestimated how much material I need so I had to get away more.
And luckily this yarn is hand dyed by my mother and she had the same recipe and remade it but
two different dyeing lots won't turn out the same. It's exactly the same recipe but
it doesn't look the same. So I made here a transition between the two yarns and I have
a leftover exactly the same amount I used here for the other sleeve. So I have a little bit
of a transition here so I hope in three dimensions you have somewhat of a transitioning
from this color to this color in the sleeve. And just look how long the sleeve is. This lower part
here will turn upside down like this but yeah this whole part here will make a big
how do you call it puffy sleeve. And here yeah now you can see it here you see a
difference between the patterns. It's exactly the same pattern. The only difference in knitting is
this part here is knitted in rounds and this is knitted forth and back.
And only the direction of how I knit creates a different pattern. But I think I thought here
I have the same problem but you don't see it that much anymore. So I think with some time and
moving it around maybe washing it one time this will disappear and give a one smooth
appearance. And here you can see this is the last row I knit with the old yarn.
So yeah next step is to knit the other sleeve and then sew it all together. Now I had to knit
the last piece the sleeve and it felt like it took ages. Maybe I would have been faster if I
cloned myself for only knitting purposes. But finally I also finished the second sleeve and
now went on to make the pleats like they were described in the instructions.
I also pinned together the tiny part where the buttons sit. Following I stitched them together
each part by itself in order to already have the pleats and everything in place.
Now that the pleats and the upper part of the bodice were basted into place I started to set
in the sleeve joining the lower edge and the box pleat with the shoulder seam. With my first tries
I got so confused that I now double checked if the buttonholes are on the top and every pleat is
where it should be. The sewing was now relatively easy because I had the pleats already in place
so I just had to make sure that I don't miss any layer. So I'm thinking about the buttons.
I don't like to just use those transparent ones so I thought I made some crocheted one
so that I cover those buttons with crochet but I don't like it. I think the contrast isn't strong
enough. You can't see those buttons they completely disappear. I think I will go for
some metal ones and then I have to wait until the lockdown is finished. Well lockdown didn't end but
I was able to purchase some buttons I liked online so now I was able to finally finish the sweater.
I sewed on the buttons with a black thin thread because the yarn itself was too thick
and I said I wouldn't use the transparent buttons but I realized that at some points
the buttons wouldn't be at the front because they were covered by the collar. You will see what I
mean in the following shot. So I sewed together the metallic button and at the back side the
transparent button so that I could use the button itself and the metallic one is just decorative.
The very last step was to strengthen the buttonholes. I used the yarn I used for the
whole garment and used the buttonhole stitch and covered the ends of the threads
on the back side of the knitting. So this is the whole thing. It's finally finished. I'm
very proud of it. I'm proud that I opened it and remade it and I hope I will wear it a lot.
Oh and here is it with the corset underneath. So do you see the difference? And as always feel free
to subscribe. I will upload whenever a project is finished and I wish you a good time. Until then, bye!
