Making a Gothic Victorian Bonnet

Victorian Threads
4 followers
3 Video Views·Dec 2, 2024
I am making another accessory to wear with the upcoming day version of my 1880's Victorian bustle gown project. While I have made hats before, I have never made a bonnet, so I thought it may be nice to give it a try for this costume. A bonnet just doesn't sound like a very gothic vampire ready accessory for some reason, but I liked the challenge!
Hello there, welcome back to the Closet Historian, and back to my sewing room for another project
today. Today I'll be constructing another accessory to go with my ongoing cicada gown Victorian
gothic vampire dress project. I of course have finished the evening bodice and the skirts,
like the first version of this costume, and then I recently here made the hand fan to go with it,
but I wanted to make another accessory here today, and that would be the hat
slash little bonnet to wear with the day bodice that I'll be making for this costume next.
I began of course with research looking at some hats from the Met's costume collection,
here are some little hats and bonnet styles from the 1880s that are inspiring me for my project
today. I really enjoyed the sort of miniaturized bonnet shape here, it seems like something that
would be quite easy for me to construct out of like a canvas, a hat canvas, buckram, and wire,
and then I love all the different little embellishments on these, I think it's so fun
with all the different ribbons and like feathers and wheat and flowers and all kinds of stuff that
are tacked onto the top of these hats, it's very fun and seems very Victorian, this sort of like
even your hat is cluttered with nonsense sort of idea. Now I have had a little bit of like proper
hat making millinery technique training when I was studying abroad during my university days,
in England I was able to take a couple of courses with a like proper milliner who's worked with
designers and knows what she's doing, so I have some proper training and then I have some self-taught
training, so it's kind of a mixed bag of which techniques I tend to go for, of course I'm not
necessarily trying to make this the most couture of hats, I just want the finished look to approximate
these kind of historic examples just with a little bit more of a sort of gothic vampire sort of edge,
you know? So hopefully you will enjoy seeing how I put a little hat like this one together, let's
jump on over and get started. And here we are above, or next to rather, the blue patterning
table of doom, as always this time laid out with a lot of different embellishments and hat making
supplies in general, I have some millinery needles, some paper, wire, buckram hat canvas,
which is kind of like a stiffened either paper or cotton thread sort of fabric-y stuff with a sizing
on it, and of course as I've started recording the heater has just come on, but let me tell you it's
freezing so we need that heater, um sorry about the background noise, but here is my first little
bonnet that I made, this little tiny one just to kind of get an idea of how these things go together,
I've never made a bonnet before, so I started making some mock-ups out of construction paper
and then here was my first like quote-unquote full-sized one, head-sized one, but I think this
one, the teardrop here in the back was just too wide, so I wanted to try it a little bit smaller,
so I made another one again out of construction paper, this is just, you know, playing around,
seeing what proportions and things I like, sticking it on this styrofoam wig head here just so I can
get an idea of what I was looking at and how far off the head I wanted it to come and things like
that, and basically just nailing down the shape in paper first, just using paper and tape to get
something that I like to look of, then once I was happy with this overall shape, I could use this
construction paper version and take it apart and use it as a pattern to create like the final
pattern and then use the pattern on the buckram as you will see here, so here I'm just taking this
construction paper version off, this was the side that I had really kind of finessed the angle of
the bonnet itself and stuff like that, so that's the side I'll be using, I'm just going to put a
check mark on that so I don't get lost as I start cutting this pattern apart, so I'm just going to
cut around the back teardrop shape here, this is going to be a kind of two-piece, the main body of
this hat will be two pieces, the kind of brim of the bonnet here and then the back of it, it's a
little bit different because usually a hat has a brim, like a tip, a top of the hat and then a
stand which is like the, like if you think of a top hat, you have your, the top of it is the
tip of the hat, then the stand is the band around that which connects it then down to the brim
which comes away from that, so with the bonnet here we only have two pieces instead of three,
it's just kind of like a tip and a stand but the stand and the brim are the same thing,
hopefully that makes some sense, you know, it's only two pieces because bonnets are a little bit
different and I never made a bonnet before and even though this one is, you know, a miniaturized
version of a bonnet, it is still kind of the same general idea, I guess they had just gone down in
size by the time we get to the 1880s, I'm not sure if they had full-size bonnets perhaps for traveling
and things like that still, because of course these little silly ones are just much more
decorative than anything else, they're not really shielding your face from anything, well they
certainly aren't, and they aren't really keeping you warm or anything, so much more of just a
fashion accessory at this point, but here I'm just uh smoothing out the edges of that teardrop shape
and then adding a half inch seam allowance around the outside of that, around the top and side
edges, basically the little v in the back doesn't need any seam allowance because nothing is being
attached to it later, you'll see what I mean, then I can take this half of my brim here as well and
trace that and then I'll just mirror it along the center front there, so let's mirror this along here
and of course tape on some extra paper so I can get the full shape because my paper is not wide
enough, this is just cheap construction paper by the way, you could use any thick kind of paper you
have or just regular paper honestly, or you could use like a um cardboard, like a old cereal box or
something like that would also work for this kind of thing, but I'm just using some crafty construction
paper to make my pattern here that I will use to then construct my hat today, I will go ahead and
scan this and try and make a digital copy of this pattern, it's not something I'm uh familiar with
how to do, but I will go ahead and do my best that way I can make this something that you can download
if you'd want to make this exact hat yourself as well, um so I'll try and make this pattern
available and I will put that on Pinterest and then link to it in the description of this video
okay so I have my bonnet back and my bonnet brim as it were, just labeling those and dating it so
I can keep track of what the heck is going on, but you can see how this starts to go together and
create my little mini bonnet shape, I adjusted the angle of this basically so instead of coming
straight out um that it came out a little bit of an angle, and the way you can do that is
if you in your cardboard version or the paper version here you can cut little dart slits into
it and spread it open and that will you know spread the bonnet out further and then you can
also cross those over and it will make it more of a cylindrical shape around the face, oh I cannot
speak today, possibly because I am a bit frozen down here in this basement today, I don't know
what the temperature is outside but yesterday it was only 35 so I can't assume it's very warm out
there, ah winter isn't it the best, not so much, all right so now I have my pattern and I can go
ahead and cut it out of this hat canvas, um this I'm not exactly sure what weight or like um exact
stuff this is because I've just had it in my stash for like six years so I don't really remember
from when I bought it exactly what like grams of weight or whatever and how much sizing is in this
and exactly what this stuff is, it's um known as hat canvas or buckram, I've heard it called both
of those things, um this has got like a sizing on it so it's a stiffened, I've seen paper ones and
again I've seen um cotton ones, I think this one is cotton um with a sizing like a starch on it so
if you get this wet this starch it becomes malleable and sticky and so you can go ahead and
use this to block hats as well on a hat block, which of course we aren't doing today, we're just
doing kind of cut and sewn theatrical hat making as opposed to let's say couture or like fine hat
making, um just doing some sort of I guess like community theater level hatting today, not
necessarily Givenchy level hatting unfortunately, but I'm just gonna go ahead and cut out my pattern
from this stiffened cotton stuff, um you can like make starch and like starch your own canvas and
stuff like that for making hats, it's not something I've done, I'm not that official
as we will find out as we go through some millinery here today, attempted millinery,
my millinery teacher were she to watch this video would be horrified because um I remember I showed
my professor, my hat teacher when I was studying in London, I remember I showed her the pictures of the
hats from 2006's Marie Antoinette saying this is the kind of thing I wanted to learn to make
and she was appalled by how poorly constructed the hats in the film were, she thought that they were
done very poorly and shoddily, so uh okay, but this person was was knowledgeable in traditional hat
making of the like highest order even though she did work with like rather um fun or like
punk rock designers like Vivian Westwood for example, um but she herself did traditional
millinery and that is what she was teaching us to do and therefore she was appalled by my
costumey leanings I suppose, um but she wanted to show me the proper way of making a hat like that
so I do sort of know how to make a nice hat, of course what what can one learn in you know four
or five months is not the same as four or five years of training and perhaps we will make some
proper hats here on the channel sometime, if that is something you are interested in let me know,
we haven't done any hatting before, I've done some hat making on my blog before if you want to see
me do more of this kind of thing, but here I'm just going to go ahead and start wiring my pieces
here, normally you would wire the top of the tip of the hat, the band inside, and then also the edge
of the brim, today I'm just going to be wiring this the edge of this little teardrop which is
kind of like the tip of the hat but it's a bonnet so again it's only two pieces, but I'm bending the
wire into shape here along the seam allowance of this hat piece, so I drew the seam allowance
from the pattern onto my piece of buckram here to follow along as well, and I'm just going to bend
this wire which is I think a 19 gauge wire, again this stuff has been in my stash so long I'm not
even positive what it is anymore, it's either 19 or a 16 gauge, I think it must be 19 because it's
pretty bendable still, um but you can use you know different wire or whatever you have on hand for
this kind of thing, especially if you're just doing like a costumey hat and not being fancy,
but I'm just bending this into the correct shape for my little teardrop here, it's going to overlap
in a flatter area on this side and I will just use thread to wrap that together,
um again you could connect that with like a florist, floristy, florist, floristy tape is what
I'm trying to say, goodness, um or with like a thread tack like I'm going to do or with wire
perhaps if you'd like, um I think thread is the nicest way to do it so that's just what I'm going
to do, just wrap the thread around here and then tie it off, basically it's the plan here,
and then I will go ahead and wire both that little teardrop and then the edge of the brim as well
using a blanket stitch essentially, um which hopefully we'll get a look at here,
again this is the um less official way of doing things, but perhaps we can do a blocked
hat because I do have a couple of hat blocks and I always like a hat so I shouldn't be too
fussed if I have to make another, I would like to take more millinery courses one day and become
have more proper training I suppose, but again it's hard to come by those things in the United
States, bigger cities probably or places where like the Kentucky Derby happened and stuff like
that probably have more hatters and therefore more hat making classes I assume, but uh other than
that it's probably London or Paris, really good places to learn about making hats the traditional
way, so one day when I get myself back to the UK perhaps I can take some more hat making lessons,
but here I'm just going to start wiring this teardrop, so I'm just again sewing this on
with a blanket stitch around the edge, you don't have to use super tiny stitches when doing
hatting like this, um again I'm just trying to create a little base that I can then cover,
so I just need something you know to work with, I don't need it to be perfect because all of this
is just structural as opposed to something that contributes to like the finished, I guess well I
mean the structure contributes to the finished look and silhouette of the thing, but none of
this will eventually be seen, it will all be covered, so if my stitches look a little messy
or a little unevenly spaced it won't matter in the end you know, but I'm just stitching around
the edge there and then through along here, this seam allowance will eventually be trimmed,
the curve will be clipped as always here on my channel, clipping the curves and um will be used
as like little tabs to hold on the brim, so you'll see that right at the brim again, the stand,
I don't know what it's called on a bonnet, I could have looked that up but I,
dang it again I have not, I am prepared but unprepared you know,
but here I am just doing a sort of blanket stitch around my wire to hold it down onto the surface
of this piece, I unfortunately had to leave the hat that I made in my hat making class,
I had to leave that hat in the UK, um I don't remember what I did with it, I probably had to
throw it away honestly because I could not fit it in my suitcase or anything like that,
there was no way to get it home without crushing it anyway, so unfortunately I don't think I was
able to bring that hat home with me because it was rather a large hat, my mistake there,
could have made something smaller, the nice thing about that was that I could just walk
to shops that had, or haberdasheries like on Regent Street um or near that area, there's a
lot of trimming shops and hat shops and supply places nearby where I was going to school because
I was um studying at American Intercontinental University which has a campus in Marylebone in
central London, um so there's a lot of, a lot of supplies for that kind of thing were within
walking distance, and my my do I miss being able to wander around Marylebone all the time, oh my,
just pop into the Wallace collection anytime you felt like it and that my dears is the dream,
so once I get all the way around here I'm gonna go ahead and tie my thread off,
so once I've got all the way around I'll go ahead and tie my thread off, now we have our little
wired hat tip-ish, and then I will go ahead and wire the outside edge of this brim, now again like
I was saying these materials are have been in my stash for six, eight years, I don't even know how
long, um and so therefore I didn't exactly have enough wire for this project, and now I'm completely
out, I was about a half inch short of wire for this, so unfortunately that does affect the structural
integrity of my bonnet a tiny bit, but it will be okay in the end because I don't anticipate to wear
this bonnet too often, and I doubt it will receive, you know, enough stress that it will become a
problem, but again I'm just bending this into shape, and then I will again use blanket stitch
to wire this edge here and stitch this onto the buckram.
I did buy these materials in person at a shop here in Denver, or in yeah in Denver-ish area,
a shop called Allen's Bridal Fabrics and Millinery Supplies I suppose is what the full name of it,
everyone just calls it Allen's I believe, I'm not sure if they're still around, I mean I hope so,
I haven't looked it up, if they are around I will link in the description, but um an interesting
shop, I actually worked there for a summer, I only worked Saturdays, so I worked there for like 10
days, if we consider how many actual Saturdays they were that summer, but while I was at university,
while I was home from university for the summer, I worked there basically just so I could get a
discount on the stuff they had there, because they had great stuff, but it's the only place in Denver
that is like, has fine fabrics, lace trims, um all kinds of different trims, feather trims,
fur trims, uh tons of appliques and like lace and beaded trim for like things like dance costumes,
or obviously they have a lot of bridal things because it's in the name, but they do a lot of
like custom bridal veil stuff, and people who are having custom bridal gowns made,
I don't know who those people are, but good for you, um that's usually where they go to buy their
supplies if they're here in Colorado I suppose, because there's no other nice fabric shops like
that, we have quilting shops and like more hobbyist fabric shops as well, but we don't
really have fine fabric shops, not like they do, they have in like the garment district in LA or
in New York or such, like places, or even in London, so to buy fine fabrics that's kind of
the only place, but this shop, uh the woman who owns it, or at least did at the time when I was
working there, um had been, her mom had bought the shop in the 1960s, and it had been a hat making
shop before that, um and she like kind of came home and was like, honey I want this shop, which
must be again quite nice, and so they had run the hat shop, the daughter had run it after the mom,
so the shop had been in the same family since the 1960s, and a lot of the stock they had, like
they had a basement in the shop, and a lot of the stock there was flowers and hat making trimmings
from the 1960s, like their stock basically, some of it was that as old as the shop was, and it had
been a hat shop before that, so they had a lot of trimmings that were essentially by that time
vintage, and even fabrics that were vintage, but it's very um disorganized and messy shop, I'm sure
it still is, unless they've had a revolution of organization the last few years since I've been
there, of course who knows with all the small businesses closing because of COVID, I assume they
have been quite hit quite hard, because of course, also if you're being uh sustained by the wedding
industry, obviously the last year has been difficult as well, so hopefully they're still
around, because they are the only fine fabric shop again in Colorado that I know of, um but here I am
with my wired brim, and my wired teardrop tip here, I'm just cutting about every centimeter
around the edge here, that way I can fold these little tabs up like this, and create a way for my
like to create these tabs that will hold on the brim basically, you'll see how I'm about to attach
this, so I'm just folding those all up so this brim has a little place to sit inside here, and then I
will sew the brim to these tabs all the way around, and I originally I was like oh I can do this
without pinning it, and then you'll see I kind of pause and pin it on there, because no you can't,
Esposito, it was a wild idea, I promise, but I'm just going to sew this brim to these tabs along
the inside edge of this along the wire, of course the wire and the stiff buckram itself will help
this now keep its shape, that's why I kind of refined the shape in the paper beforehand, that
way I knew what I would be getting into, and knew what I need to do here, now I think the official
way to do this on like a hat as opposed to a bonnet, again bonnet construction, this is my first
and only time I've ever tried to do that, um but I think you're supposed to do like a back stitch
here, like a spaced back stitch, I can't exactly remember what the official stitch you're supposed
to use here is, but I just ended up going around with like a slanted um stitch, and then I came
back from the other direction and crossed over another line of slanted stitching over the first
create crossed stitches on the inside of here, um again this is just, I just made it up when I was
sitting here, I didn't want to do any additional research, I just wanted to get it together,
I should say perhaps that because I'm sounding exceptionally lazy when I say that, like I just
made it up as I went, but um I haven't been having, you know, the world's best brain days
here in the winter, I don't really have, I don't think I have seasonal defective disorder because
um honestly I get the same amount of sun no matter what season it is, because I don't really go
outside much, even when there isn't a plague, um outside is not my place, so it's not like I'm
getting less vitamin d or anything, but winter is always a little bit harder for me, I find my
insomnia really acts up in winter, and my uh you know slightly anxious self is a little bit
slightly more anxious, so winter is not the best time for me, so if I can get anything creative
accomplished I consider it a win, and uh for some reason I was really putting off putting this bonnet
together, even though I was so excited about all these trimmings and stuff like that, I suppose
making the base like this isn't my favorite part, I like trimming things, so I uh making the base is
just a means to the end of trimming, and you'll see how much fun I have with the trimmings later
when we get to that point, but I'm just putting slanted stitches in here, I figured it would work
you know, making it up as I go here, again this is kind of a halfway method of making one of these,
you could there's you know if you're doing like a high school production of like a Dickensian
thing and need to make a bonnet quickly, you could make something like this out of cardboard and
covered it, um and like you could make something like this you know gluing things together instead
of sewing, so it's sort of a halfway method between the finer techniques of life of millinery
and the slapdash techniques of let's say you know cheap community theater perhaps, which of course I
don't mean to dog on theater in any way shape or form of of high highest theater or the lowest
theater, for of course I was a theater kid in high school, or I wanted to be at least, I didn't get
cast in much because unfortunately the thing about theater is it's important that you can at least
have a small bit of acting ability, even in high school level they expect you to not be absolutely
terrible, whereas I cannot act, so that's a shame, but musical theater was my favorite thing we I
think my school did one musical year, yeah um and I was only ever cast in one of them of the four
years I was in high school of course, and uh so I was in Fiddler on the Roof as a background person,
I believe I had one line which was someone whispered to me and I had to go no, um so that
was all I could be trusted to be able to to act for one moment and be appalled, um so that was as
much acting experience I ever got, but the rest of the time I was working on costumes for theater so
I have done some theatrical costuming on a very you know basic level back when I was a kid,
and I did a couple I did like um makeup supervising for a show in college which was
like hi I know how to sew and they put me on makeup supervision and I was like I don't
I'm not qualified for this uh I'm just here to like you know make hats but whatever so I did
that didn't last long, but I had a very fun time my senior year of high school I um did
costume design for a couple of shows and my best friend was playing Sabrina in the play
which is the play that Sabrina the film with Audrey Hepburn is based off of and uh my best
friend was playing Sabrina and so I got to dress my best friend in cute 50s costumes
and so that was a very fun time, but as you can see now that my base is all finished I cut out
some velvet using my same pattern pieces as before some black velvet to cover the outside of this hat
and now I'm figuring out what I want to do for the lining even though for I don't know why I'm
bothering with the lining right now it's the last step we won't get to do it right now but I'm
deciding to use some of the taffeta that matches my gown here for the lining of this so I have some
of these spare pieces of taffeta nearby that I'll use to line this but we can't do the lining until
the very end we'll get to that later but I just cut out the same pieces that I cut out of the
buckram in my black velvet with a little bit of extra seam allowance around them and we're going
to start with this teardrop shaped covering the top or tip of my bonnet here the very back of it
um again I'm trying to use my hat making experience and translating it into a bonnet basically is what
I'm trying to think through here just kind of slit in this back piece here so that it wraps around
you can see actually my little teardrop comes down a little bit further than the brim um so that is
just because some of the material got eaten up because these materials and the wiring and all
that stuff is thicker um so I should have added a little bit of extra length onto my brim something
I will know next time if I ever make another bonnet which hopefully but here I'm pinning this
on and actually along the like uh middle line of this I have the bias 45 degree angle lined up with
the fabric so of course how could you ever see on camera the bias or not of this black velvet
because black velvet becomes vanta black once you start putting a camera on it it just absorbs all
light so it's going to be hard to see the details a little bit I do end up turning the iso uh turning
the iso up in a minute here so you can kind of see what I'm doing with stitches in this because
you know black velvet it's just impossible to see what's going on but here I am just pinning this
teardrop around to cover the outside of my hat here finagling it down here along this little
v section just doing the best I can luckily that was me covered with ribbon and stuff later so I'm
not too worried about it looking perfect down there but around here around the edges I'm pinning
from the like flat bit down into the brim to hold this over the corner of the tip of the hat
essentially um so of course there's that wired edge on the inside in there so it has a lot of
structure to it and I can just go ahead because uh another piece of fabric will be covering the
brim I can put stitches I can stitch this on basically a centimeter down from the tip edge
itself using a spaced back stitch and um those stitches will all be covered once I cover the
brim in a moment so I don't have to worry again about my stitches being perfect because again
they will be covered here I'm just using a doubled cotton thread for this you can see I
have here a cotton thread and a polyester thread that's because I started using cotton thread
because that's what you're supposed to use um but when I was doing the structural work wiring the
brims to stitching the brim and the tip together my thread kept breaking and so I was frustrated
with the strength of the cotton thread and so I went and grabbed some polyester thread which of
course is a lot stronger um so I used the polyester thread for the more structural bits of this and
I switched over to cotton for the sewing and the trimming a leaf just fell off my bouquet that's
sitting here on my I have a bouquet of flowers on my desk and a leaf just fell off so I'm sorry if
you you heard that crash and of course our heater is still on in the background here but again it
is quite cold and I have my dressing gown on down here to try and keep warm I made a flannel line
of dressing gown earlier this year but I'm just stitching this down again with a little spaced
back stitch around the edge here of course again this will all be covered it's about a centimeter
down from the hat tip itself I'm sorry you cannot see my stitching here because again just disappears
into that black velvet that is kind of the nice thing about using velvet on hat projects sewing
with velvet for sewing projects like clothing I find to be a bit of a nightmare and I actually
detest sewing with velvet I recently was reminded of this which we'll get into sometime soon
but uh sewing with velvet for hats is actually very nice because your stitches just disappear
right down into that velvet pile and you can get away with some sins when it comes to that
here I'm just clipping the curve of the inside of my covering for the brim here now that my
tip is all covered I'm just going to fold this edge under about a half inch force and then start
pinning it into place right along the edge of the tip so I have this folded top edge of course I'll
need to be able to have enough seam allowance to fold this all towards the inside as well
which I should have cut this with a little bit more seam allowance I recommend cutting
something like this with like about a one inch seam allowance I would think because you can
always cut some off but you of course cannot add on any more on yeah that's right here I am just
folding the top edge under about a half inch and then pinning it along the tip here just
easing that into place so you can see that half inch is folded under and then folding myself a
nice clean edge basically along the top and then I will slip stitch that down to the hat tip for an
invisible finish and extra again an extra invisible finish in this velvet like so all right
and I can again make sure I have enough to fold the inside here I'm thinking oh my goodness that's
not very much seam allowance you left yourself there Esposito oh well I'm gonna go ahead and
stitch around here using a slip stitch and just my black cotton thread again and don't worry I
will zoom in in a moment and again turn that iso up so you can see what the heck I'm doing but I'm
taking a little stitch out of the hat tip itself and then into the folded edge and then into the
hat tip and then into the folded edge just to slip stitch this down seamlessly well not seamlessly
there's a seam we're stitching the seam now but uh cleanly and nicely I suppose so it looks seamless
despite there being a seam I'm not making any sense today great news all right here I have the
camera turned up to please see what the velvet is setting unfortunately so it's very blown out
but hopefully you can get idea I'm taking a small stitch out of the folded edge of my brim covering
strip here and then a small stitch into the finished hat tip top tip side again my bonnet
terminology is non-existent and I will just be folding all this towards the inside and
playing with it until it lays nice and smooth again as you can see I could have left myself a
little more room to play with here and it would have been a lot easier than having to struggle
with this very thin seam allowance in some places or narrow seam allowance but I will go ahead and
pin this in place as best I can around the edge here just getting it flat and smooth on the other
side and rolled over in here so that it's nice and smooth on the outside like this of course my
velvet is covered in fuzz actually um but try and pin it as best I can in here and then um I'm going
to stitch this down right along the edge from the inside to the outside um so this is held in place
which would mean I have visible stitches on the outside now there are many ways to deal with this
in hat making um in this instance because the wired edge of the brim the wire is on the outside
if I stitch right next to it in this velvet it almost looks like the edge is piped which is kind
of a nice uh effect it's the wire inside that's holding it out that gives that sort of curved
piped effect and I'm like perfect that will work just fine for me so I'm going to stitch right
along here of course in silk it would look very different and I would probably do a different
finish but in this black velvet again it hides some sins and now this corner I'm thinking oh man
I really don't have enough that's right we're going to finagle it and make it work we'll make
it work hmm in the end somehow I managed to get around that corner it's just not a lot to work
with down there but again I'm just going to double up a piece of cotton thread and then continue
to stitch everything down down here at the very like bottom where this little v is I'm just
doing whatever kind of stitch gets me the result I need honestly I'm not being very precious about
it which I mean what could we say about this whole hat so far couldn't we but I'm not being
very precious about it but you know I'm here for the end result and uh I have a lot to learn when
it comes to this sort of thing but this is where I'm at right now this is the kind of thing I'm
capable of I think it took me a day and a half to make this hat so of course if I took a whole
week to make a hat I could do something a bit finer but alas I hope you will forgive me I am
trying to give myself a little bit of grace I keep seeing those memes uh you know on Instagram
and whatnot these days where it's like um it makes sense that you won't be as productive or
like okay during an ongoing global event like this that's been lasting months and you're probably a
bit frazzled um so it's okay to give yourself grace and then the next little thing it says but
not you though right and it says oh yes but not me have you seen those I'll put one of these memes
on screen now sorry meme creator who I'm stealing this meme from but you know it's a little bit like
that it's like it makes sense that you would need more time and to be gracious with yourself but
not you though right yes now I am about to dive into the day bodice for this product here real
soon I um have to do some fixes to the fit on the shoulder and like the neck of that bodice
so I'll take my mock-up that I made last year apart a little bit to try and finesse that
area and try and fit it down I haven't been able to find very many resources on that kind of thing
so I'll have to do a little bit more research on how exactly I need to fix that as well um before
I can go ahead and make another mock-up and then make the final silk day bodice but here is my hat
covered on the outside at least in some black velvet now it's looking very cute and chic all
by itself honestly um now again we're not going to line this yet we're going to go ahead and trim
this first because all the threads and tacks and stuff like that to keep the trimming on we want
that to be hidden underneath the lining so I've pinned my little bonnet here onto the styrofoam
head again so that I can play around with trimmings and see see about exactly what I
want to do to finish this hat and how I want to trim it again from the examples uh the historic
examples the extant bonnets like this that you saw at the beginning of this video from the Met
they used feathers, ribbons, fabric trimmings, beads, um little dried flowers, real flowers,
faux flowers, all kinds of different stuff they used to pile onto these hats and so I've got all
that kinds of stuff um sitting here to decide exactly how I want to trim this I try to give
myself options when it comes to trimming hats because it's kind of like how I feel on the day
and how I end up arranging it's like flower arranging but on a hat you know so I have these
little velvet flowers I have some berries I have velvet leaves and satin leaves here these are
millinery trimmings that I picked up online I have two shops that I like to buy flowers and
millinery trimmings from in particular on Etsy so I will link both of those in the description
one is called Mary Not Martha and the other is called A Pink Swan they have both vintage and
modern millinery trimmings and laces and veiling all that kinds of stuff which you can have a
really fun field day at those places but I knew I was going to want this black moiré ribbon down
here along the bottom edge all of the bonnets I was looking at have these ribbons along the
bottom edge like this to then tie in the front um that's not usually how these hats were kept on
it looks like they were usually kept on with hat pins and that these ribbons were more of
a decorative thing at this point um in hat history as it were by the late 1880s or mid to late 1880s
uh the bonnets weren't really tied on using these ribbons it seems like they usually were pinned on
I think into the hairstyle um but you know they still could perhaps serve on an extra windy day
you can tie it on as well as opposed to just being decorative but I had this length of black moiré
ribbon that I used for that so I'm just pinning that into place and I will put a couple of tacks
here and then sew it along the edges as well so that this stays in place like so and then I was
thinking you know what I'm gonna make a ribbon out of my taffeta so this is a strip of the taffeta
that I used to make my gown for this costume um and I just tore a strip uh I think this is about
two and a half inches wide here um I tore a strip from the length you can actually tear plain weave
silk fabric although it is slightly terrifying to tear fabric like that but that's all right
and then I had this cotton lace edging from mood fabrics that I decided to stitch onto the edges
of this just using a large basting stitch for this just to make this look a little bit more like
an edged ribbon so I'm basically making ribbon myself here I had a green ribbon but it wasn't
exactly the right shade of green it looked a little bit too neon against that dark black
I mean I say that not that I don't like neon green and black together because I definitely do
but I decided to coordinate with my gown perfectly I would go ahead and use the same exact fabric
that the rest of the costume is made out of so I went ahead and trimmed both sides of that strip
of silk like so and then I started pinning it onto my little bonnet so I have it pinned underneath
the little v in the back there and then I'm just pinning this top bit into loops atop the hat
really so I'm just pinning it into loops and then pinning those loops to the bonnet itself down into
the styrofoam as well once I like the look of it so I'm just kind of loosely looping this up into
an arrangement of like ribbon loops that I like instead of just tying a bow I'm just kind of
loop-de-looping around until I like the look of it and pinning things into place eventually
anywhere I put a pin here I will need a stitch basically to hold it in place but just seeing
if I like the look of things rearranging things you could of course also sew a wire into the edge
of this if you're doing something like this that way the bow would be extremely positionable you
know or poseable with a wired ribbon but I wasn't too fussed just pin all that into place like so
and I can mess with the exact arrangement of these as we go along but it seems like having a really
big loopy bow thing on the top of your head was kind of the look at the time so then I was
deciding which of my little embellishments I wanted to use did I want to use this little paper
feather thing which was the right color green at least kind of a fun weird texture but I was
really liking the way that the silk looked with the black velvet and I was kind of liking the
simplicity and the purity of that look honestly and so I decided to use for my all my other
trimmings I used the black velvet ones to kind of match in with the black velvet but just change up
the texture a little bit although it's still the black velvet texture these are of course black
velvet leaves that are kind of pressed into this leaf shape um it looks like a rose leaf really and
then I can actually mold these because these are wired um into a different shape if I should like
so I decided to go for the black velvet leaves and the black velvet flowers with this so I started
pulling those apart to be able to arrange them so I'm just going to start arranging these on my
bonnet as I like I will be sewing all my trimmings down as opposed to gluing them but again if you
never intended to like retrim this hat in the future I suppose you could glue things down as
well um I just prefer to sew things I think it's just as fast and it's easier to you know I'm not
going to accidentally get glue on some part of it I don't want to or anything like that
if I'm stitching these things down and technically you know if I ever wanted to strip this back to
just the black velvet base I could because I could just take the lining out snip all my little tack
threads keeping these trimmings on from the inside and then retrim this hat um which would be you
know useful I doubt I will ever do such a thing but the possibility is still there and that's kind
of nice but here I am just going to go around and start figure out exactly how I want to embellish
this again I keep trying to use these feathers I really wanted to use them but it just wasn't
working you know it just wasn't wasn't actually the vibe so I ended up not using the feathers for
this project if I had some nice billowy vintage green or black ostrich feathers maybe but I did
not so I ended up going for these black velvet posy flowers instead you can see I'm just moving
those around and kind of floofing them the way I like and again these are all wired stems so I'm
just kind of transforming them into little loops that I can then sew down onto the base of my hat
but I'll just pin everything into place until I like the look of it and then you move on from
there at this point I was thinking oh I kind of like the asymmetry of this of course I had already
begun to go with the asymmetric design because my bustle dress is actually has an asymmetric
design to it as well I figured that that we can keep that going with the bonnet here
too although the day bodice for this bustle gown will be much more symmetrical the skirts will
still be asymmetric so it's kind of a combination of both but here is my finished trimming design
that I decided to go for here of course everything's just pinned in place right now
so I need to take some of this off in order to be able to stitch underneath so what I'm going
to do now is go ahead and grab my phone and take a few pictures of this arrangement so that I can
put it back if I forget you know like if I forget how I had it arranged and how I wanted it I can go
ahead and put everything back into order after referencing these pictures if I need to so because
I'm going to have to take these flowers off in order to tack down the ribbon but again I am just
going to stitch everything into place anywhere there is a pin I'm going to put a stitch into
the hat itself the stitches on the inside of the hat will be kind of messy but again the lining
will cover that and then everything should be invisible from the outside by the time I'm done
any stitches that might show in the ribbon will be covered by the flowers etc etc so
I take these things off now and then do all that again but instead of with pins with thread
so after I have all my trimmings stitched on and you can see those messy stitches on the inside of
my hat here of course all that is about to be covered by the lining for this bonnet and so I
decided to use the same again silk um and uh I'm stitching one of my little labels cloth
cloth historian-ish labels to the inside of this hat just because I thought it would be a fun idea
um a lot of the times you'll see these bonnet linings had the maker like um embossed or printed
onto the inside of the lining with like a metallic ink but of course I do not have the ability to do
that today but I could just sew on one of my little cloth labels here these are from Dutch
Label Shop by the way um which they are not sponsoring this video but um I have mentioned
them a few times on my instagram I have a discount code with them um although it doesn't it's not an
affiliate or anything I don't get anything back from that other than I got these free labels
recently so that's fun so you can find the information about that in the description of
this video as well if you're interested in getting some cloth labels of your own um that's where mine
come from though if anyone's ever wondering they're from Dutch Label Shop who have been lovely to work
with and actually the only brand I've ever really worked with um because it's very rare that I get
contacted by a brand that I'm actually interested in working with it's very rare but for my lining
itself I just have that teardrop shaped piece for the back it's just the same shape again with a
little bit of seam allowance and then I have this probably like five or six inch wide strip of my
fabric that I'm going to go ahead and gather along I should be gathering along both edges but I only
gather along one edge at this point you'll see me gather the other edge later I should have put a
running gathering stitch along each side of this while I was here but alas I didn't think of it at
the time so here I'm just running a stitch along one side to be able to gather it down
and I will gather probably I don't know maybe at least a yard of this down well maybe not a yard
probably probably I did not measure it was a strip that I felt was long enough but I did
not measure it at the time a lot of this is very intuitive and done by feel you understand
just gathering this down so that I can stitch it to that teardrop shape to create a little
lining to go inside of here um you could do like a very nice like pleated lining like this um or
like kind of fan pleat it down I just wanted to have to go with gathering I felt it looked a little
bit more and this is a bit morbid but this is a gothic sort of costume a little bit more like a
coffin lining kind of to have it gathered so that's what I decided to go for felt a little bit
more goth to me for whatever reason I did find the center of this so that I could at least have
the gathering be the same amount on either side in general of this little lining but I'm just going
to put the right sides together here and stitch along the outside edge with this all gathered
down to fit my little teardrop shape so now that I have this all gathered and pinned it down to
the outside edge here well half of it really I'm going to go ahead and stitch this on using a spaced
back stitch again this seam here that I'm stitching is never going to receive any tension so it's you
can use quite large stitches because again nothing is ever going to be pulling on this
other than maybe me taking the lining out to retrim the hat you know so you can kind of baste this
almost essentially so there's one side done I can do the other the same way I don't know why I did
half and then the other half but you know the quirks of these things you can see how it's going
to look when I unfold everything from that other side but I'll just other side the same way so now
my lining is all together I can start pinning it in place inside my bonnet here let's position that
I am going to um connect it down here at the bottom of the teardrop and then I will put a
stitch in the very top as well and tack it through the outside like a hidden stitch that's like
hidden by the ribbons um just to keep it in place back there but you don't really need to anchor it
to the back much more than that because it'll stay down in there the buckram kind of is scratchy so
it grips onto the silk quite well it'll stay down inside here especially once you put your head in
here obviously um and then I'm going to fold over the outside edge and like hem it well fold it in
on itself so that I have a finished edge and then I will fell down the outside edge of this lining
to the velvet to keep it in place but you will see that shortly so I'm just gonna space out my
gathers and then I realized oh I should have put a gathering stitch along this outside edge as well
yes you perhaps should have done so silly kid um so I recommend doing your gathering stitching along
the inside edge and the outside edge of that strip beforehand but here I am putting my gathering
along the outside so I'm just stitching the running stitch along there as well and then I
can fold it in like so can't beat the color of this silk huh I mean to be fair of course I have
a from the left here I have a green light pointed on my work surface here so it's glowing in that
green even more than usual but my goodness this fabric comes alive in in light especially in
sunlight wow does it look cool you can see here's a picture that I took when I was modeling this
costume for my blog last October um with the sun hitting it and wow does this silk
transforms and becomes even more iridescent once the sunlight hits it again this is the color
called Elphaba from Silk Baron again not sponsored but um they have some lovely silks over there
and I'm excited to try and use more of them in the future but here I'm just folding in the edge
along the top here to size again I'm not pleading this in any particular way I'm just
kind of want to keep it random and messy in some ways but just fitting it down and pinning it along
the edge and then I will fell it down into place I'm just going to fell down the outside edge of
this I will give you a close-up of this process in just a moment where you can see my nice
you know flannel pajama situation that I have going on here in the workroom
it's lockdown again you know try and be gracious with yourself if you are still in your flannel
pajamas at 4 p.m while you're making a hat you know that's how it be sometimes I'm just felling
down this uh probably like five or six stitches per inch not like a huge stitch but not like a
um and if they do it just looks handmade so you know not sure exactly how this would
have been done at the time but this is how I chose to do it at the time when I was making
this I suppose just stitching it down and again the velvet hides all sins honestly which is so
nice but this is the last step for this hat actually so we are just about done and here is
my finished bonnet on our lovely styrofoam gal here unfortunately I'm not modeling this for you
because I have a pesky uh irritation with my eye right now which means I can't put makeup on
so you'll just have to see what this looks like on me when I reveal the day bodice as well um I'm
coming here soon on the channel when I get to model the whole thing together once I have it
made of course lots of work coming down the pipeline for me my goodness but here is my
finished bonnet I do think it came out rather cute and rather gothically delicious honestly
um I've never been excited about having a bonnet before but now that I do have one I really rather
like it I think it's so cute especially because it's like miniature I don't really want a full
size bonnet but this little like mini one it feels very like I don't know the hot topic version of a
bonnet in the best way um possible so perfectly goth and I'm very happy to have it I hope you
all enjoyed seeing how this project came together today again I'll be jumping back into more
Victorian costuming and more of the cicada gown project here real soon before you know it so I
