Space saver rotating tool bench. 7 tools on 1 bench #diy #dreamgarage #toolstorage #casters

How 2 Wrench
167 followers
2 Video Views·Jul 16, 2024
…Well if you know what this bench is and you know how special it
is to me then you've been a fan of the channel for a long time.
We're glad to have you here. I finally finished up this dream roto bench build from a really
old product Craftsman made back in the day called the roto bench.
But within a 4'x29"
footprint
So the shop space has just dramatically saved a big a footprint and check this out.
This thing rotates around and put the tool you need into place.
In this video I am doing a deep dive into everything I learned about it because it is on its
like fourth…generation of it, how I use the casters to make it wildly mobile…Just
everything about this is is awesome So I made a long one.
I'll put chapters in below so you can kinda bounce around. This thing's really cool.
If you've never used some of these products I think you're really gonna enjoy it yourself.
Alright my friends Let's get into this. It's been about eight years in the making.
Hey friend. Smash that subscribe button It really helps us out.
Also we have hundreds of videos and playlists on here for you And then we started adding
We even start adding captions so you can pick your language Enjoy the video.
…Alright I'm on to the project of the roto bench, and if you hadn't seen this before what it
is is a bench that has these three sides so you can mount tools and then rotate it around I'm
super excited to use it but Craftman came up this years ago I just picked up another one because
I for surely have a whole bunch of tools I wanna mount to this and not take up so much floor
space But…once I started to kind of plan this out what I realized is the angle at which I'd
have to lift this to get onto the wheels they had, it was just going to be unachievable
once I get all that weight Right and I was like going to weld handles on here but once I kinda
practiced it if you will, it was a really extreme angle.
So I'm going to install these quick release adapters for these flip up casters.
And I was getting ready to set everything out to weld it, and I actually think I can just bolt
them on easier because one of the holes is already done which means I only got drill four holes and that's what we're going to try now.
So I'm going to speed this up, and you can just watch a time lapse where you could skip ahead
to find out what
this turned out like. So let's go.
Before I start to show you how you installed this accessory and what we did here this is the
number one modification we did to this workbench compared to its original design that was to
make it mobile and roll much easier with a lot of weight.
But I wanted to take a step further and put casters on that not only make it mobile but they're
also removable so I could get it on firm feet and take advantage of
the tools that have a lot of vibration I wanted them to work in a
firm space. So let me show you what that product is first…
…This also blows my mind how fast deals change
and for some reason this stuff always seems to be cheaper than when I bought it.
When I bought it you'd have to buy the casters separate and then the bracket kit and now you can
buy all four casters…at a couple different weight options.
You get 600 pounds or 900 hundred pounds as you could see there but they come with the quick
release brackets which just blows my mind because I paid like $30 something just for the four casters.
Well if you're anything like me see a tool and you think oh I gotta have it I'm gonna use that
someday and that was a problem for me is these sound on the shelf for a long time and I bought different products from different people.
So I wasn't sure if that template was going to work and had to manually measure it.
Today since you can buy an all in one kit man that's awesome.
So same exact ones I bought bought, it's just a
package deal. Let me show you how to install them.
…I've put multiple of these on and you really want to follow the instructions for the height
off the ground and then also have them parallel to the piece of equipment so that the casters
can take full advantage of riding on the wheels nice and level with the ground.
But pretty simple, drill some holes, mount them up good to go. Let me show you how they work.
Alright let me show you…how rad this really is
…I've got some sharp edges on here
…
It's might be easy now. It
gets heavy.
…... What you
really want to do is make sure if you use different brands of casters, the instructions won't
work that come with these brackets so what I like to do is do that test fit that I originally
did just to see where the ground actually is and then from the ground I'll find that sweet spot
that the cam is just gonna start to then do its job.
But if you use the two and a half inch measurement but you have a bigger caster you're gonna be screwed.
So this is what we want
…
…And what I did on a…different set
I'm not going to do it on this yet unless it becomes a problem.
Is if you have really super uneven ground or you're going to bump this with your foot it could slam down on you.
So what I did to solve that is just drilled a hole through the movable and the non movable part
of the cam here and I took a trailer hitch pin, put it in like that I did that in my mill
because it such a heavy piece of equipment I didn't wanna risk it like slamming out of control
It wasn't a very stable…platform because it was a really small base too for so much top
weight So that was super awesome to be able to lock that in place with these.
…Here's the top heavy mill that I was talking about and I want to show you how quick this goes on.
It's a little bit better video than the one I did on the bench.
So as you can see you take the caster just slip it into the bracket.
On this one we welded them. Then you take the securing pin which is quick release no tools required.
Set that in place and it stops caster from going out and then you would just step on it to raise it.
Well take a look at what I did here. I drilled the hole straight through the movable non
movable, to lock that in place so that it couldn't be bumped up.
And then what I simply did is took this hitch pin off an everyday trailer hitch I can drop it through quick release.
Once again no tools required and then it keeps everything
securely in place. Watch me move this around.
Alright here we go. Now this was the first time I ever used these I learned two really valuable lessons.
Number one they really like a clean floor. If you have any rocks or like in my case I got a
bunch of the debris from welding and grinding on the floor, it really gets caught up on those wheels.
It makes a kind of a pain. You'll see I'm kinda struggling moving around.
And the second thing I really learned from this project was you want to have them out as wide as
possible…on that base for something that's really top heavy like that that.
I'm actually pushing around somewhere between 900-950 pounds right now but the fact that I can
do that alone and kind of shove it in place flip it off the
casters back down to the adjustable feet to have a level
tool. Super cool. Let's get back to the roto bench.
weight So that was super awesome to be able to lock that in place with these.
But like I said for this as of now I don't think I'm going to need to do it.
If I do no big deal I'll just pull them back out Go up the drill press
pop a hole through Boom I got a lock pin and I'm good to go.
I've never seen anybody else do this I think it's a great safety feature.
Well like always I'm going to show you the things I learned so that you don't have to go through those same lessons.
You see that rubber lip by the garage door? That really wanted to kinda hop over that so I
found I needed to pin them in this case and I added even more accessories as you'll see in the end.
I just thought this was being harder than it should be, and I could see that the stock feet…
were…the problem are making it really jump…because I'm hitting that.
So I'm raising those up a little bit more right now
. Till I get rid of that and then get him level.
…I thought I'd show you my little setup for how I drill that hole to put the…the safety pin
through…It's pretty dang hard believe it or not to drill through that by
hand and get through those four surfaces.
What I did is you take the wheel back off and then you'll see I made a little shim set up a
washers in here so that as I'm drilling the pressure doesn't want to rotate this.
I've got a sacrificial piece of wood underneath so that you know I don't drill through And then
I found a block that fit in here that what I could do is put this in the fully down position
where the cam is flat to this bracket.
And then what I realized if you tried to make it too perfect to a 1/4" which was the pin that I used, hitch pin.
These are off trailer hitch. I would have to kinda like bend and like
force things in there and I want things to be just smooth and free you know like it's supposed to be.
So what I did is went up to 5/16", and that gave me that little bit of wiggle room that they go
in there just fantastic and then once there's a load on it
anyway, it kind of centers itself in that that little extra hole.
So this is how I did that to make it much easier if you don't know do much by drilling, using a
countersink first will make your drill bits last a heck of a lot longer.
Then I went to 1/4" and then stepped it up to…the 5/16" and it just works great as you're going to see in a second.
I kept going back and forth in this video because it seems like I'm saying simple things but the
reality of it is if you've never used like these flip
casters or you haven't really thought about your tool organization.
These can become so frustrating you may not wanna use them at all.
And they're pretty awesome if you learn these little details on how to position the caster.
None of this stuff comes in the directions. So I'm gonna go ahead and do kind of a deeper dive.
If you wanna just fast forward to seeing how the Rotobench works and the tools on it, you can skip ahead.
But let me give you some really good pointers so that you can love this product as much as I do now.
I wanna make a point…of of something that can be you know seem like there's a problem when there really isn't.
When you install these…lower these.
I found it way easier to make sure the wheel is facing out like this.
Sometimes where the ground is especially if you're like,
unlevel back there and there's a lot of like downward angle on this.
You're gonna find that this just doesn't want to go in here, and it's gonna be cumbersome You think something's wrong.
But if you put it in its very lowest position which is right here,
the articulation of that cam and whatnot that is the lowest position.
You always will get it in and out. The other thing just to make note if you didn't notice,
brackets are directional you wouldn't want that on here.
You could find yourself struggling with some obstructions in some cases.
And especially if you're gonna tuck this against a wall, and you're thinking about like hey I
wanna be able to put this tight up against the wall, and then I wanna be able to pull the piece
of equipment in that case you'd want to take that back caster…and slide it in that way.
So that you don't have to muscle that tool like away from the wall.
That was another little…tip that I discovered, but…I…am
ready…to utilize this tool now!
I'm gonna start putting…the equipment up here…And I can't wait
…No weight on there it rolls around pretty good.
. let me let me show you what this is gonna do.
That's gonna be so nice…
And I don't even have the feet leveled or anything right?
So what I'm gonna be able to do is these pull out
…They work as nice little work
benches with your…selected tools in place but then pull pin, and then I can
take…and get this…up to the next tool.
You can see here the board missing
…Nope that is as far as it
goes…And then when you put these back in, did you notice that little wiggle wiggle?
When you put these back in they've got this lip that goes under there grab some of that and then
you get the strength of all this to make it a more stable workbench.
My understanding…so far, I wanna make sure that whatever tool will clear
the ground so I'm gonna have to measure…this distance and see what exactly will fit on there
so that it'll have the ability to rotate and then also it couldn't come into obstruction with with anything out there.
…Alright first off, I wanna get the…since I'm gonna operate it, I want it on the
ground I don't want the casters walking around on me…and we'll show those again in a second.
Alright here's another huge tip that's really gonna save you some
problems and some redo work and just ask me how I know!
Well have this one bandsaw on the right here that I really wanted to put on here but it's quite tall.
And what would happen with that bandsaw is that I could not run 360 degrees of the table.
So if you have one really tall tool, what you can do is
you can make that one where it can rotate in either direction.
you can make that one where it can rotate in either direction.
So I'm gonna have an arrow on there that says I could go either way when moving it so I don't forget later on.
Because what I don't want is I don't want it in the position like the left
photo and then I forget that I can't continue rotating.
So that means for the other two tools the grinder and the sander in this case, they can only be rotated one direction.
So the grinder for example can only rotate…to the
right, which would bring that bandsaw up Right?
And then if I continue rotating I can move that
bandsaw all the way to the right which would then bring the sander that's top.
So the sander once it's up can only
rotate left then so that I don't have any problem with that tall tool hitting the ground.
Couple little arrows. It's going to do a great job keep from causing damage to my tools.
It is really nice to take advantage of putting one tall tool on here that
still can fit within that side space will.
So what I'm gonna do here, that tool is lighter than this one so the weight is side loading
that pin If I push away from it it makes it really easy to operate and then once I get up here,
just kinda guide it into place.
And, boom you know I'll double check things.
Then what you do…is it has the support boards…And when you're ready to
use that tool…it gives you even more rigidity
…
I mean it's a snug type fit and you put the other one on.
It really gets solid and then it taken all the weight off that pin anyway.
I haven't tried this one yet, so I wanna make sure…that it fits
…
Boy they make that tight…Which I like…
…There we go…
I think I know why you could put seventy five pounds on there.
That thing is as rigid…as
can be. That is so freaking cool!
Alright here's what's also so great about it.
I don't wanna make a mess in the shop I wanna make the mess out
there I wanna close this garage door the dust and junk out of the shop.
That's why I put dirty tools on here. So this thing way too heavy to drag around.
The casters it came with you had to lift this like, There's no handles.
You had to lift it like all the way up here. All this weight on there just wasn't gonna happen.
It was awkward enough just with those. So The solution is these quick release castors.
If you watch the whole video, you'll see these being put on…but anyway what's so great about
these is I just do these brackets and I can take these and move them to other equipment, and I
can make a smaller footprint…if I wanna put it up against the wall or something.
So I talk more about that in different part of the video but there you go.
So this is so fast…No hardware no nothing Okay.
And then what you wanna do is have the wheel facing out It puts the cam in a place to operate
boom that's it
…
Now watch this You aren't going to believe this…Can you imagine?
I should have weighed all the tools just to show like how much weight that really is.
…How stinking cool is that?
You know I bought the first one of these…back in Iowa and I've drug around like three states I
was dead set it was something I want to have in my shop.
Maybe because I don't see other people doing it too so I thought it'd be something fun to play with.
Over the years what I've learned…is
probably…as it came, It was a little bit of a pain in the butt.
I think there was just a few things that needed to be…work through.
And…this configuration right here I can tell I'm thrilled with.
You know like I said a couple of the…you gotta decide when you're when you're making tools and
using tools like how often do you want to act access it?
Right Like how often are you gonna use it If you're gonna use it all the time, you want it you know ready to go.
And I will tell you this if you have a tool and it's not easy to access you
tend to not use it
and maybe you should right? Maybe it'd be highly beneficial..
…Well I've been using this for about,
oh, six weeks now and I just can't express enough how much I love it.
I think I'm in a final configuration, and I wanted to show you what I ended up doing for the tool selection.
So when you watch the video of me showing you how to operate it I had that grinder on the center there.
I started to realize I had like, this wasted space of these these pull out sides.
And then also got to a point where I was like shoot, I know
that typically when I wanna use a bench grinder I also wanna use a belt sander.
Good example is like if you cut a bolt off and you have to redress the threads and you wanna use both processes.
You might use that to be really quick And then this to just kinda clean up the burrs.
Whatever the case is it's extremely common that these tools won't be used at the same time.
So the idea of having to pull these sides out and then flip the tool…I started having big regret.
I was like dang this is just a pain in the butt. So much so that I bought another Roto bench…
just to have…two and then I have plenty of other tools around here I've got a table saw that
would even fit on it And I was like okay I'll do that And then it hit me.
Why don't I make…the tools that I put on these something that I could pull out and then use on
any of the other processes maybe I'm cutting something on the…
bandsaw…and you get down that little piece of wood or if you had a metal one or whatnot and
you wanted to clean it up with a grinder a wire brush or a sander, the
fact that I can have that up in position then slide
this back on to give the table the support.
Now I end up having at least something I could sand on and I have something with a wire brush or
a stone wheel to be able to not have to rotate around those processes.
So much So I've even thought about switching these two around and making this the
one that's outside facing…It's such a dang good idea I think I have to do it
and then moving this one inside because in that way no matter what I'm doing, I'd have this guy
and this guy You know what I think I like that too much Dang it I thought I was done, but I'm gonna flip those around.
In all honesty I don't do much woodwork so I'm hardly ever using that unless I'm making stuff
for like tool displays or stands I just I don't use a bandsaw a lot.
And I'm just at the point where I'm really pretty much done with any kinda carpentry stuff.
I can't even think of a time I'm gonna be using this in the future
because of just how far I am and and everything I've made.
But while I'm under here this was cool use of space.
I just took some eyelet bolts and put all my spares like all my sanding belt for this guy and
this guy in that little tote so that it stays with it.
But…super cool.. Well my friends put some comments below.
What did you think of this project? Is this something you wanna do for yourself.
I'm actually gonna sell my other one. thought about even breaking it down and doing like a
giveaway or something but you can probably find one of these locally.
Anyway, I thought this was just an absolutely out of this world project.
I'm so happy with it. And you know all the different places it has
given me that freedom…to move around tight spaces.
I haven't even hardly started this shop.
Last week was the first time I basically started working on this area here.
Where…it's really gonna be what I would consider my dirty room.
I picked up a few new pieces of equipment. This sharpening…
tool I thought that's gonna be really neat and then I got a a different radial.
I'll sell the other one because I just like this one better because it had a more articulating table.
And then I really wanna start to work this way and get all these tools that are sitting on benches.
They're all gonna get hung up. Obviously like everything else in the main shop it's gonna get super organized.
I need this flexibility in this work area to just move this equipment around.
If I wanna use that bench once it's cleared off I'll be able to slide this all the way over and
I have a really nice workbench so I could take you know stuff right from the workbench here and
back and forth Drill press as well having a space to actually set stuff while I do those processes.
That big sander right there I bought this thing for I think $20
bucks on a garage sale and it's literally just a broken switch.
So that'll be a nice easy fix. Got a nice piece of equipment there and I'm gonna take that one
and mount it on this stand I picked up from something else, which already had…rolling stand
made for it It had a place put a little paper towel rack little storage underneath.
So man everything just keeps coming together. Making a lot of progress.
This is everything that I just picked up. For really fast quick adjustment.
I've got these, that I'm gonna dial into, you know the…
chop saw bed here so I can just throw stuff on and chop it and go.
and then it folds down if I really need it out of the way and think well you know that thing in three months, let's just get it out of the way.
That can go under a bench that folds up in the corner and boom problem's gone.
Alright my friends if you haven't done so yet please make sure and like share and subscribe I'm
gonna get back at making the next tool or working in the
shop. As always my friends make it a great day and keep wrenching.
