0:00 Intro 0:50 Picking Out a Slab 1:51 Best Tip for Working with Slabs 2:44 Fire in the Shop 4:24 Slab Layout 6:01 A Risky Form 8:21 Releasing the Slab 9:09 A BIG Problem 12:50 Round Over and Major Touch Ups 13:45 The Design 15:25 Easier than you Think 18:12 Harder than you Think 20:04 Another BIG Problem 22:17 Money (how much this table costs) 23:52 An Apology 25:00 The Reveal
At this point, I'm a pretty decent woodworker.
I'm also a good husband and an okay dad, but I am a great son.
Let me explain.
All right, here's the deal.
My parents just left for vacation and I want to surprise them when they get
back with a brand new dining table.
So we're on our way to GL veneer right now to pick out a nice slab.
Now, don't get me wrong.
I've built them a ton of stuff in the past, but if I'm being honest, I would
say that their house right now kind of consists of experimental pieces from
early on in my career and stuff from Ikea.
So I want to make them something that they can be really proud of and
that I can have back when they die.
Just joking about that last part.
I've already got a ton of furniture, so I don't know.
My brother can have it.
All right, let's just cut to the lumber yard.
Okay, so they got a lot of interesting stuff at GL, but we're not here
for a giant wizard head.
We want to slap.
So this gentleman here is Dan and I told him I wanted to try something new and he
suggested a wood called monkey pod.
And I figured I love monkeys and I love air pods.
So yeah, let's do it.
So we picked out a slab from their online inventory, found it in real life.
And then since it's way thicker than I needed it to be, we took it over to this
crazy slab flattening machine that they have where you load up your piece and it
kind of spits it back and forth, making it thinner with every pass.
Then when you've had enough on one side, it goes into this giant Pac-Man looking
thing that eats your slab like a dot, flips it over and spits it back out to get
the other side.
It's crazy, but I love it.
Anyway, then Dan got me all loaded up in my very real truck and it was back to the
shop.
Okay, here is my number one tip for anybody who wants to work with slabs.
Well, probably not actually my number one tip.
But the tip that you probably haven't heard anywhere else, let's say that.
And that is find the broken ones whenever possible.
First, there's a chance that you could get a discount on them.
Second, I think a lot of times they look cooler when everything's said and done.
And third and most important, it's way easier moving around two kind of big
chunks of a slab versus moving around one gigantic chunk of a slab.
And trust me, throughout the course of a project, you will end up flipping it,
moving it and picking it up dozens of times.
Now, if you're wondering how to go about finding the broken ones, look for straps.
Or if you don't have crippling social anxiety, you could probably just ask
somebody.
So I went back and forth with whether I was going to talk about what happened next
in this video or not.
But as you can see here, I've got the slab up on the CNC to flatten and thin them a
bit more.
And you might also notice that my dust collection isn't working too well.
It's kind of hard to see on camera, but I was getting a lot more airborne dust than
normal.
Now, I actually have a couple new dust collectors on the way, but there wasn't
really anything I could do about it right in this moment.
So I figured I'd just keep going.
So I'm literally on my last pass of the last half of the last slab sitting in my
office here.
The CNC is over here, by the way.
And I look out the window and notice a lot of dust.
So I get up, walk out the door into the shop.
And I kid you not, there was a literal flame shooting out of the dust collector.
So I run over to the CNC, hit the emergency stop, run over to the dust
collector, look over at my fire extinguisher, make the split second
calculation that there is no time.
So I just rip out the plug in the hoses, start running it all the way across the
shop.
About here, the bag basically turns into a fireball.
I throw it out the door and onto some dirt and it could have been really bad.
Now, I don't know why or how this happened.
All I do know is I will never run a cut like this without being present.
And all joking aside, I am very grateful that other than a little stench,
everything is fine and good.
Now, thankfully, I called up my friends over at Street Tree Revival and told them
about what happened.
And Danny, who could definitely win a Jon Snow lookalike contest, was able to get
the cut finished on their WoodWiz in like three minutes.
All right.
So after that minor setback, I've got the slabs back in the shop here.
And I'm picking a layout.
So design wise on this one, the biggest obstacle is going to be the fact that half
of the seating for my parents' dining table is a banquette.
So there needs to be room for people to be able to slither into place from here and
here.
In other words, no legs on the perimeter.
Also, my mom hates sharp stuff, which if you know my normal style, makes me think I
might be adopted.
So I know my mom's going to want big radiuses on all of the corners.
And my dad, meanwhile, has become the sharp corner police ever since Dolores and I had
kids.
So basically, if I do put a sharp corner on this table, my mom's going to hate it.
And my dad's going to put a pool noodle on it.
So I'm just going to try to avoid that.
Other than that, though, all I'm really thinking about at this point is 84 by 40.
Or if you're not in the US, 214 by 102.
That's what size is going to fit their space.
By the way, anytime I mention anything having to do with imperial dimensions, I get
comments telling me about the superiority of the metric system.
So I'm going to conduct a little poll here.
If you prefer the metric system, give this video a thumbs up.
And if you prefer the imperial system, give this video a like.
And then I'll tally up the votes in a couple of weeks and we'll see where we land.
Also, if you think that's not a very scientific poll, go ahead and hit the subscribe
button to show me that.
And we'll consider that the sort of peer review process.
Here, I'm giving you a video definition of the idiom penny wise and pound foolish
by reusing a 40 dollar sheet of melamine to make a tabletop that combines a slab
worth thousands of dollars and epoxy costing hundreds.
Probably not the smartest move.
And as much as I'd like to tell you that the reason that I do this is to be
economical and environmentally friendly, the truth is I'm always just too lazy to
go get a new sheet.
So I pretty much wait until it's hanging on by a thread.
But the result's the same, right?
Saving the world one piece of melamine at a time.
And whether that's due to virtue or laziness, doesn't really matter.
And actually, while I'm on the topic of idioms, one that's always made my head
spin is dimes to donuts.
You know that one.
Like right now you're probably thinking, I'll bet you dimes to donuts Chris is
about to go off on a tangent.
Well, you're right.
So here's the thing.
I get what it means.
But in the time since it was coined and now we've gone from a world where you
could probably buy several donuts for a dime to a world where you would need
several dimes to buy one donut.
Basically it's flipped.
So that always makes me think that in like 1953 there must have been this point
of intersection where donuts actually did cost a dime.
And then that phrase made no sense.
These are the kind of thoughts that keep me up at night.
That and worrying about epoxy spills, which despite my throwing caution to the
wind with this form, I had none of held tight like a champ a minute ago, you
might've noticed me using a big brass mechanical pencil.
And if you've seen any of my recent videos, then you know that that's the
pencil that I've been designing for the last few months.
And don't worry if you didn't notice, because you will see more of it later in
the video that said last month, we finally released it and it immediately sold out.
Then about a week ago, they started shipping and I started getting comments
from people and I could not be happier with the response so far.
Here's a few emails I got.
And for people like Vic's friend, I'm putting together another limited run.
So if you missed out the first time, seriously do move fast.
I promise this is not a sales tactic.
They really do go fast.
And if you don't care about any of this stuff, then let's just move on.
So at this point you can see that the slab is coming out of the form pretty
easily.
And believe it or not, when I get to this point in a build, my confidence is usually
pretty sky high.
And that's because I know that the hardest part for me is in the rear view
mirror, the epoxy.
So here I'm actually feeling pretty good about myself.
I'm flipping the slab and cleaning up silicone from the underside, flipping it
back over, not a care in the world, taking it over to the CNC so that I can flatten
it again.
I've got my new dust collector hooked up, which works great, by the way, doesn't
even catch on fire, which is awesome.
First side comes out great.
So I flip it over and then let me just tell you about it in real time.
Okay, ran into a pretty big problem.
I've never had this happen before, but basically flattening the slab and noticed
like a big wet spot, some epoxy soup, which is not good.
Pretty sure I know what happened.
Earlier in the video, I talked about being Pennywise and Pound Foolish and I did it
again.
So I used expired epoxy, which I thought was going to be fine.
I mixed it all up.
Everything looked fine, but I did find these few little bits of almost like
crystallized epoxy in there.
I assumed that as the epoxy heated up, that stuff would just kind of melt in.
Uh, apparently it didn't.
In hindsight, what I should have done is one, not used expired epoxy.
And two, if I was going to use expired epoxy, I should have strained out the bad
stuff that I saw in there.
It was just a couple of little ones.
What that means is probably in there, there's going to be more of that stuff
floating around, but as long as it's not on the surface, I think it's going to be
fine.
I don't think I would feel comfortable selling something like this to a client.
It's for my parents, so it's fine.
It'll be a good test to see how it holds up over the years.
I'll have access to it.
The good news is the wet spot seems to be only about as thick as those little flakes
were. So not even a 16th of an inch thick, probably a 30 second.
In metric, that's some very small amount of millimeters.
But yeah, I think it's going to be fine.
This is the underside of the table, so that's good.
I already did the top and it was fine.
So I'm going to finish cleaning all this up and then I'll get back to it and learn
from my mistake, I guess.
I film a lot for these videos.
Arguably too much.
I mean, just right here, what do I have, like 10 shots of me setting up a track
saw and then making two cuts.
Yet somehow every video I still miss good stuff.
We're only 11 minutes into this video.
And as you already know, I've missed a fire and whatever my reaction was to finding
uncured epoxy in the slab.
So I decided that I need at least one camera that's monitoring me 24 seven.
And I also decided that if one was good, three would be better.
Now, in fairness, two of them are going to be monitoring the outside, but I'm going
to hook up one of them inside.
Not that I hope or plan to have any more shenanigans, but if I do, hopefully I'll
catch it. And I'm guessing that by now you've caught on to the fact that I'd like
to thank Reolink for sponsoring this video.
So what I have here is the Reolink Argus PT Ultra, which is a 4K battery powered
security camera that's packed with features like the ability to pan and tilt and a
spotlight. And it's just one of four 4K battery powered security cameras that
Reolink offers.
So, like I said, two of these cameras I'm actually going to set up outside.
And what's really cool is that I don't need to run any wires through walls or
anything like that. And I can even run it nonstop using these solar panels.
And if you live where weather might be a little bit more harsh, don't worry, because
they're built to withstand rain and snow.
Now, I definitely could have placed these cameras in a more discreet spot if I
wanted. But to be honest, I want mine to stick out.
For my money, the best thing that these things can ever do is tell a would-be
burglar. Not here, pal, better look elsewhere.
And I feel confident that if someone does show up, these cameras will be ready
thanks to handy features like human vehicle and animal detection, dual band Wi-Fi
compatibility. And if it comes down to it and I do need the footage for any reason,
they can record to an internal micro SD card or to a hard disk that I keep inside.
So if you like tech and could use a more secure home or workspace, check them out
using the link in the description.
And thank you again, Reolink, for the cameras and for sponsoring this video.
All right. So as you just saw there, for my mom and dad's security, we put a nice
radius on all four corners of the top.
And now here I'm touching up some of the more major problem areas on the top, as
well as some of the super major problem areas.
And these are going to need a few days to set up.
So you guys might remember in the last video I mentioned how lately I've been going
online to get my wood, which I hear a lot of married men still do.
Sorry, I guess my lumber rather, from a place called Woodworker's Source.
And anyway, in that video, I made a little joke about how the only thing I miss about
going to the lumberyard was being called hun by the elderly ladies who work in the
office. Well, apparently whoever packed up my last order from Woodworker's Source
heard that because they sent this in the package.
Thanks, guys. OK, let's talk about the design of this one.
So this isn't actually the first table that I built for my parents.
Many, many years ago on this channel, in fact, I built them a dining table out of
plywood, which, if I'm being honest, wasn't really their style.
I was just kind of going through a stacked plywood phase, as kids often do.
Functionally, though, this table's worked out really well for their house.
Except the whole sharp corners thing.
So my first thought was to just translate that design into a hardwood version with
softened edges.
The problem with this design, though, is that all of the support is coming from these
two centered vertical pieces.
So over time, if people push on the table to help them stand up, it's going to really
stress and loosen these joints eventually.
So next, I played with a design that fixed that, which I think is nice, just not really
my style. And then there was another one that I thought was cool, but would kind of
become an obstacle for people trying to slide into the center on the banquette side.
So what I ended up coming up with is sort of a marriage between these two, and you can
definitely see the shared DNA with the original.
I'd say this one is maybe like a second cousin thrice removed, which I don't even know
what that means. So I don't know why I said that, but you get it.
It takes inspiration from the original, but is new in every way.
Kind of like the new Beetle or the new Challenger or the new Camaro or the new
Mustang or the new Bronco or the Mini Cooper or every 911 ever made.
Sorry, I kind of drifted off there.
Where were we? Oh, yeah.
So here I'm working on the sort of, I don't know, double cross looking pieces.
This one's going to go on the ground and this one's going to go on the underside of the
top. And as you can see, this one is bigger than this one.
But where the wings go on both have to line up.
So basically here I'm taking my short piece and long piece, finding their centers, lining
those up and then measuring out an equal distance so that that'll happen.
Easy. Then from there, I need to make all of the wing pieces.
So here I'm just cutting out a bunch of oversized chunks and then I'll just mark the
center on each one.
And if I line up my new marks with my old marks, it'll all work out.
Again. Easy.
And I think this is a really good takeaway, and that is a lot of times the parts of a
finished piece that look complicated are actually pretty simple.
And on the opposite side of the spectrum, the parts that look simple can sometimes be
pretty difficult. I think to most people, if you were to look at this piece, they would
probably think that making these two cross shapes is the hardest part of this build, but
it wasn't. What you just saw me do was the most technical part of these shapes, and it
was pretty simple. Find the center, mark out 20 and a half inches on both sides and
you're good to go. Then once you've done that, from that point forward, the rest of the
shape, all the curves, it's all just aesthetics.
There's nothing functional about it.
And if you're a little off here or there, no one's ever going to notice.
And there's actually an easy way to make the shapes look good by using templates.
I'm not going to say that making templates is easy, but it is low risk.
You just draw things out until it feels right and you can do it as many times as you want.
And then whenever you're ready, you cut them out and shape them.
And once you're happy with your templates, you're basically just tracing the shapes onto
the actual pieces.
And I know it might look confusing if this is your first time seeing it, but it's actually a
super repeatable step-by-step process and it doesn't require any high level of hand-eye
coordination or anything like that.
It's just a bunch of simple steps that happen to add up to something that looks complex.
And really, that's what most woodworking is.
There's very few things that require a ton of artistry, maybe like carving a claw and
ball foot or something like that.
But that stuff would look dumb on my furniture anyhow.
I guess this is all my way of saying, if you want to follow some step-by-step instructions
to build something great and take the guesswork out of it, go check out our plans.
There's a link in the description.
Now, as I said a minute ago, sometimes the stuff that looks hard is actually simple.
And now here's a good case of the opposite, where the stuff that looks simple is actually
hard. So what I'm doing here is making all of these vertical pieces that'll connect my
two double crossed things.
And actually making them is simple.
I'm just making six pieces that are all the same length and have the same 10 degree angle
cut on their ends.
The hard part is accurately positioning everything when you go to attach it all.
So first, I'm going to be using dominoes to do this.
And I want this joint to be really strong.
So I'm going to really load it up, which is not really hard, I guess.
But you just need to make sure that you're really paying attention because each piece is
slightly different. And I don't want to brag, but I did a really good job of paying
attention to everything here.
So the real reason this is hard is because even if you're like me and you painstakingly
model everything in 3D, you still can't tell where everything is going to need to go.
I mean, you can in theory, but the chances of what's theoretical and what's real being the
same is not likely.
So if you do just blindly follow what's supposed to be, you're going to end up with
problems. So my solution for this was to only cut the joinery in the bottom half and then
just set the top piece in position and mark out where things actually hit and not where
they were supposed to hit.
And then by just kind of working backwards, I can mark out where I need to cut in
everything. Just when you think you got everything figured out, something dumb happens.
So I'm going to vent while I put these clamps away.
So the base is made out of maple, which is pretty hard.
So I was pre-drilling because maple is so hard.
And I thought I pre-drilled everything, but apparently I missed two of them because two of
the screws stripped and now I have everything together and I cannot get these two
apart. So I'm kind of brainstorming what I'm going to do.
I think I'm going to first try to get the screw out, but I know there's going to be part of
it that's going to be stuck in there.
So I'm probably going to just have to like, I don't know, cut it out or something, maybe
multi-tool. And if I can get that, then everything else should be fine.
It's going to definitely mess the piece up, but hopefully I can keep it to where all the
problem areas are just under where the joint is so that you can't actually see it.
We'll see how it goes. You'll know before I do.
So the reason I'm taking things apart here is right now the piece would look like this,
which is nice, but a little clunky.
And I want it to look like this.
So basically, I'm taking it all apart to do all of the shaping, which would pretty much be
impossible to do if the piece were already assembled.
And while I'm doing that, I'm going to try to predict the future.
So I try to be pretty active in the comments section, responding to people's questions.
But I'm going to try to preemptively answer a question that I think I'm going to get a ton of
with this one, which is why use screws in the first place?
So you just saw that they caused a lot of problems.
And if I'm being honest, they really aren't providing much strength here.
So the reason is they're like little mini clamps.
You'll notice that when I'm putting this thing together, I didn't use any clamps.
And the reason for that is I was worried that I wouldn't get good, even pressure and that I
might even bend the wood and then create little gaps where the pieces meet.
So that's a reason. And if you were wondering that or even commented on it before I got to
this point in the video to explain myself, then I've successfully predicted the future.
And here are tonight's lotto numbers.
Now, let's talk about everybody's favorite topic or at least the topic I get asked about the
most. How much does a table like this cost?
So here are the numbers.
The most expensive material input on a wooden table like this is going to be and I hope
you're sitting down for this. The wood.
So this slab plus all of the wood for the base cost about five thousand dollars.
Then you've got your epoxy and this table used quite a bit.
So that's about another five hundred dollars.
And then we'll call all the other stuff.
So that's the hardware, the finish, yada, yada, yada, another hundred bucks.
So we're at about fifty six hundred dollars in materials.
Then there's the most expensive part, the labor.
And this is always tricky to calculate.
So this time to calculate that, I'm just going to ask chat GPT.
How much does a fine furniture maker charge for their labor?
And they said 30 to one hundred and fifty dollars per hour.
So let's just land right in the middle at 90.
And I'd estimate the build time on a table like this is about 60 hours.
So that's fifty four hundred dollars in labor for a grand total of eleven thousand.
So I guess there's three ways that you can look at it.
One, a table like this costs eleven thousand dollars.
Two, I missed out on the opportunity to profit about fifty four hundred dollars if I
would have taken the time I spent on this project and built something for a customer
instead. Or three, I lost fifty six hundred dollars in material costs on this build.
None of those are really great options, but the first one feels like less of an attack on me
personally. So I'll think of it that way.
All right. I didn't want to do this, but I said something earlier in the video that I
probably shouldn't have.
And I think I owe somebody an apology.
So to refresh your memory.
But if I'm being honest, I would say that their house right now kind of consists of stuff
from Ikea. So I want to make them something that they can be really proud of and that I
can have back when they die.
So. If anybody out there from Ikea is listening, I shouldn't have said that.
I think it might have come across like I was saying that having furniture from Ikea in
your house is a bad thing, and it's not.
I have stuff from Ikea and I'm a furniture maker.
Honestly, truthfully, I'm switching back to being sincere here.
It would be a dream come true to get to design something that Ikea would sell someday.
And I guess I don't mean Ikea specifically, I just mean to be able to make something that
millions of people could potentially have in their home.
That would be awesome. OK, I just wanted to get that off my chest.
OK, so here's a plan.
I had wanted to get this built before my parents got back from vacation, but they came
back a week ago and I literally just put a coat of finish on this yesterday.
So obviously didn't make it.
But it's still going to be a surprise.
They don't know that I built it.
So I'm going to call them right now and have them come help me move something, which
they might be suspicious of.
I don't know why they would think I would call a couple of elderly people to help me
plug heavy stuff around.
But whatever, they're full of themselves.
So let's take advantage of that.
Here's how I imagine it's going to go.
They're going to get here.
I'll have the piece covered up.
They're going to say, where are we moving this to?
And I'll say.
I'm thinking your house and then we'll just see where it goes from there.
Can't really plan it out too much.
I just got to see what happens.
So that's the plan.
OK, real quick, before we reveal the table to my parents, I'm just going to quickly say
thank you for watching this video.
I truly do appreciate it.
And if you've enjoyed it, consider giving the video a like and subscribing.
All right, let's see what my parents think of the table.
Where are we going?
I was thinking we'd take you to your house, my house.
Yeah, it is.
Oh, it's beautiful.
Oh, my God, it's beautiful.
I feel like everything else in my house is.
I've built all that stuff.
You're filming really to get our reaction.
Yeah, I put my lipstick and fixed my hair and I want to have a sexy.
See in the next one.