Tool 2 Wrench Amazon Store Links: https://amzn.to/2Ujfu5F Use these tools links to support How2Wrench and know we use the same tools as seen in the videos! Join this channel to get access to these perks: https://www.youtube.com/channel/UCBhM8DCKnT3qXwTW0eToyCg/join -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways One on one Techline: https://how2wrench.com/ols/products/techline-one-on-one Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
Hey friends Shane from How2Wrench.com and we are pretty excited that we have made a lot of
progress in the shop getting things clean and organized into the fabrication area As you can see
here, we'll have the different drill presses A lot of this is gonna go away when we figure out
what exactly we want…trying to fit everything where it doesn't have to sit outside.
We are trying to figure out what we're gonna do because this will extend back into this area.
Where I can grab whatever welding equipment and then pull it out real quickly and not
be inside any building to do outside welding for our projects.
I've even got a cord ready to go properly gauged But today's video we wanted to highlight We
finally got one of the Vevor mag drills like you saw in the thumbnail.
So let's go ahead and get this thing opened up and we've got a pretty cool use We're going to
use this to fix a problem with a safe that we bought a gun safe.
So let's just get it opened up see what's in there and then put the thing to work.
Hey friend. Smash that subscribe button It really helps us out.
Also we have hundreds of videos and playlists on here for you And then we started adding
We even start adding captions so you can pick your language Enjoy the video.
I don't wanna bore you to death. You can slow this down if you wanna watch it but it is super
well packaged even with the wood bottom…
Everything went together literally in a couple of minutes as you'll see here.
Like I said it was just threading on a couple things. It does come with a manual which I did
verify on the…coolant system how it went together.
Let me get this all unpackaged and you can just slow this down like I said if you want.
Alright Let's check this thing out… As
you can see you can pick it up this thing is quite heavy.
The version that we have does not have the adjustable RPM limiter on there.
So that would be nice but we do have another Vevor tool, Variac that we could take and control
that speed If we do think that we are drilling too fast, we can play with that.
We could see here the magnet is super strong.
I'm moving the whole table here It's like a three hundred pound four hundred pound table.
or four hundred pounds with all the stuff that's on here.
So heck of a strong magnet. Then we have the coolant reservoir which is really cool It goes
down through the center of this and this little plunger that you put up in there I'll talk about these bits in a second.
We'll pop up and then let the coolant flow down through the
middle of what you're drilling. That's pretty slick.
On the less expensive version I have, you have two set screws that hold in whether you'd use
the drill chuck adapter or if you're gonna put in the boring
bits, you just tighten up each one of these set screws.
… Yeah I see how that lifts up and that's gonna let the
coolant run down to this, but also when we get to the end this is spring loaded and now pop the
little plug out that you're drilling If you're doing core drilling, that is gonna be a heck of
a nice feature but this thing is nice and tight.
So that's cool The other thing that we have here is it actually has adjustable gibs on
here…on the ways so that you could take even comes with an allen wrench for that.
And if it vibrates loose over time or you need to stiffen up your fixture here to get really
straight accurate lines you have three adjustable gibs on here to tighten
up this v track, if you will right here.
That's pretty cool. There is a scale on here a metric scale to give you some indication of your measurement.
And then this whole drill head is adjustable up and down on this too.
So even in what seems like this lowest position here, I can go ahead and move this whole head
up on here to get a little bit more flexibility of what I wanna do.
But the big thing you know we're really excited about is you're gonna see how we're gonna use it
is the fact that I could mount this thing on something at a
different angle, like I'm going to on the gun safe to get some really good accurate drilling.
So for us that's gonna be a pretty exciting feature on there.
And then for the version that we have all these different cutters that comes with one two three
four five six seven eight nine ten, eleven different cutters from twelve by thirty thirteen
fifteen sixteen eighteen twenty twenty one twenty three twenty four, twenty six and twenty
seven millimeter diameters on there, it's just a wild range that's included in here.
So pretty cool on that. Obviously we got a traditional chuck as well.
This one here is a Morris taper I'd have to see what that is.
Pretty exciting that that comes with that as well because then I have a wide range of bits that I can use here.
And this says three to 16 millimeters (5/8in) so that is well beyond the half inch Half inch
should be that, thirteen millimeter if you will So we're bigger than that.
Says here we're eight hundred and fifty RPM…
It also comes with a strap so that if you have it being used in a position like this or possibly
even upside down because that is an option You could be hanging it up on a rafter and doing
something like you wanted to drill… That'll be okay if you let's say you wanted to
completely put it on a rafter and drill like this up into something you could.
In either of those cases where you would have this mounted, really anything other than flat a
tie down strap that you could feed through either side here and wrap around what you're doing.
So that is handy as well… I think we're ready to go ahead and put this thing to use.
Let me just go ahead and show you again in case you missed at the first time how easy it is to
swap out these different bits I just got the two little set screws here.
And then we have an adapter we are gonna put in that's on that morse taper and I'm just gonna
push the head of the, drill against that on the bench to suck it up into the morse taper and then go put it to use.
Alright Let me show you what I'm working with here. I've always wanted one of these gun safes.
I would have never guessed…quote unquote how cheap.
I guess these can be in how small some of the hardware and stuff is. So I had to take all the
guts out for the locking mechanism you see under there I'll show you when I'm done But basically
they drill a hole…in there so that they could come in and then break the lock mechanism to get
the door open like I'll show in this photo here and when they do that, they tend to come at an angle.
I've even got it welded up. This little bracket where they drilled and caught the end of it.
I'm gonna strengthen that back up because this is on a lock so that you can
overcome that solenoid and get into it with just a manual key.
Well I wanna fix this but what I didn't wanna do was… really mess up the face of the front.
So to overcome this I really didn't wanna have to mess the face of this up and grind this all off and weld it.
At least I don't think I wanna do that so far. Because then go to weld this thing I take thing back out of the house.
Then thing I came up with is I'm gonna machine this rivet…to a really sharp square edge and
I'll chain for the top side so like when I'm cleaning and stuff my hand doesn't, you know get
cut or whatnot But I want this bottom edge to be really square.
And then I want this mag drill to drill in just ever so lightly…that I could do two things I
wanna square up those two holes so that I have a straight shot instead of being at an angle Right?
And then I want this square edge to sit down in that somebody wouldn't real easily be able to
come along and pry it open because my goal is I'm gonna weld it from the inside and then over
here, I'll paint this one surface rather than a whole area of the door.
So we'll see if this works in the end but then like I said when I come through this side to fix
that, I'll just weld this up grind this down I should be good to go and then be able to put it
back to where… the lock and everything functions nominal but like I said I wanna do a
couple things I mean half of having a safe or anything is to slow the process down if someone gets in there.
Make it really hard for them to work for it Right So by putting this plug in there it's actually
better than it was originally because it removes the access to that solenoid.
They'd have to drill other holes and come in at an angle which they could probably all do but I'm just making it hard.
This apparently if you know he crook out there watching YouTube videos they know like hey
measure from here to here This is the spot to drill and that's how you can do it So I'm just
gonna like I said make it a lot harder So I went ahead and measured this an N drill bit once I
get the hole straight if that makes me happy otherwise I may have to go to a bigger drill bit
and then really rely on my weld on the other If I really have to go much bigger then I'm
probably gonna wanna weld it on both sides but regardless I still wanna take that
mill bit and kinda face this down here Just make
it nice and flat. Alright Let's put this together and go for it.
Here's that feature I was talking about where you can adjust that whole bore head if you will,
to go up and down the the way there and get in the right position… Super nice feature.
Well I went to use this And so how big that chuck was I was getting really excited about all the
potential use cases with the end mills I could take advantage of in the future.
This really is my first time using it and kinda getting comfortable and figuring out where to
hold and support it not smash into my nice floor in my bedroom there I started to realize boy I
needed some better preparation to protect the area there so I just don't make myself a world of
hurt but ounce of prevention will go a long ways.
…Sweet
…
Oh yeah We definitely…have a straight hole now
… Oh look at that
… That is freaking
awesome…That's what I was hoping for…
So let me show you what I meant here. Now I can plug that because it's going in a like I said a
really nice straight hole.
Definitely wouldn't wanna go any looser than that.
And now I've got this back side to weld up. Make that nice and strong.
So that were there where you could see how crooked they were versus with the bag drill You can
get really nice straight shot on that So what I'm gonna do next like I said is make that little
countersink here so that I could set that in just a hair more.
And then when I do that I could take and cut this off in the end of the mill too and just, you
know make it a perfect length and not have to grind so much but he'll give me
plenty of weld material that's for sure.
You know I'll tell you what that dang mag drill made that so straight
… especially because I'm all the way through the two holes.
I really don't need to countersink this anymore… There's no point in me doing it because now I'm just dead straight.
Oh how awesome is that. Actually save me a step I'll turn this in the middle.
Get myself that sharp edge right there. And I'm gonna be done I don't even need to do the mill.
Let me just show you what I was gonna do here… I got a two flute and a four flute end mill.
I was gonna come in here and just kiss that.
But I just don't need to There's just no…I guess the only re if I did counterbore it just a
hair, it would make it that much harder to get underneath it to try and pry on it or trying to
break that off but man they ain't they gonna be doing that If it's this much work they're gonna
drill a new hole… Pretty simple I'm a leave long.
I'm gonna cut the sharp edge off. Chamfer for the top side weld it.
Put my safe back together and get to use the thing. Why don't I go ahead and set this up and
you can see where you could put the coolant reservoir on the side?
…So if you're using it in this position… I think it might be kinda tough because you
definitely have to be tilted down a little bit if you're a level or even a little bit back.
The oil is just not going to push to that I don't know if the centrifugal
force will suck it through I'm not really sure plus you'd have to have this pretty full.
So to me in this position it may just be better to do some type of manual oiling.
Or do some type of drip system. You know what you could do You could put this bracket on a
magnet and have it sitting here and then go ahead.
And because this has an on off little you know… open and close if you will at the bottom here.
But that's probably what I do I just put a magnet on this put it up here and
then just aim the hose on another magnet right on what I'm drilling.
That'd be another option too But pretty stinking cool! Alright my friends If you haven't done
so, one two three Alright my friends If you haven't done so yeah I'll put links below if you
wanna get one of these for yourself But as always like share and subscribe Make it a great day and keep wrenching…